X-Git-Url: https://git.proxmox.com/?a=blobdiff_plain;f=MdeModulePkg%2FMdeModulePkg.dec;h=6cba72998278d42b605ec5e3609182b5d6f2f6e7;hb=bb4485d388392c9b99aac2435ab08e3d54836f26;hp=2009dbc5fd5207e071c27a823412c6fdc180e45f;hpb=a6bde8a644694a69b66c0a2168fd7702176bbd46;p=mirror_edk2.git
diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
index 2009dbc5fd..6cba729982 100644
--- a/MdeModulePkg/MdeModulePkg.dec
+++ b/MdeModulePkg/MdeModulePkg.dec
@@ -3,18 +3,12 @@
# It also provides the definitions(including PPIs/PROTOCOLs/GUIDs and library classes)
# and libraries instances, which are used for those modules.
#
-# Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.
+# Copyright (c) 2007 - 2019, Intel Corporation. All rights reserved.
# Copyright (c) 2016, Linaro Ltd. All rights reserved.
# (C) Copyright 2016 Hewlett Packard Enterprise Development LP
# Copyright (c) 2017, AMD Incorporated. All rights reserved.
# Copyright (c) 2016, Microsoft Corporation
-# This program and the accompanying materials are licensed and made available under
-# the terms and conditions of the BSD License that accompanies this distribution.
-# The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php.
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+# SPDX-License-Identifier: BSD-2-Clause-Patent
#
##
@@ -31,26 +25,6 @@
[LibraryClasses]
- ## @libraryclass IpIo layer upon EFI IP4 Protocol.
- # This library is only intended to be used by UEFI network stack modules.
- IpIoLib|Include/Library/IpIoLib.h
-
- ## @libraryclass Basic function for UEFI network stack.
- # This library is only intended to be used by UEFI network stack modules.
- NetLib|Include/Library/NetLib.h
-
- ## @libraryclass The helper routines to access UDP service.
- # This library is only intended to be used by UEFI network stack modules.
- UdpIoLib|Include/Library/UdpIoLib.h
-
- ## @libraryclass The helper routines to access TCP service.
- # This library is only intended to be used by UEFI network stack modules.
- TcpIoLib|Include/Library/TcpIoLib.h
-
- ## @libraryclass The helper routines to access HTTP service.
- # This library is only intended to be used by UEFI network stack modules.
- HttpLib|Include/Library/HttpLib.h
-
## @libraryclass Defines a set of methods to reset whole system.
ResetSystemLib|Include/Library/ResetSystemLib.h
@@ -73,9 +47,6 @@
## @libraryclass Defines a set of interfaces on how to process capusle image update.
CapsuleLib|Include/Library/CapsuleLib.h
- ## @libraryclass Library for Deferred Procedure Calls.
- DpcLib|Include/Library/DpcLib.h
-
## @libraryclass Provides global variables that are pointers
# to the UEFI HII related protocols.
#
@@ -422,6 +393,9 @@
## Include/Guid/S3SmmInitDone.h
gEdkiiS3SmmInitDoneGuid = { 0x8f9d4825, 0x797d, 0x48fc, { 0x84, 0x71, 0x84, 0x50, 0x25, 0x79, 0x2e, 0xf6 } }
+ ## Include/Guid/S3StorageDeviceInitList.h
+ gS3StorageDeviceInitListGuid = { 0x310e9b8c, 0xcf90, 0x421e, { 0x8e, 0x9b, 0x9e, 0xef, 0xb6, 0x17, 0xc8, 0xef } }
+
[Ppis]
## Include/Ppi/AtaController.h
gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}
@@ -480,6 +454,18 @@
## Include/Ppi/NvmExpressHostController.h
gEdkiiPeiNvmExpressHostControllerPpiGuid = { 0xcae3aa63, 0x676f, 0x4da3, { 0xbd, 0x50, 0x6c, 0xc5, 0xed, 0xde, 0x9a, 0xad } }
+ ## Include/Ppi/AtaAhciController.h
+ gEdkiiPeiAtaAhciHostControllerPpiGuid = { 0x61dd33ea, 0x421f, 0x4cc0, { 0x89, 0x29, 0xff, 0xee, 0xa9, 0xa1, 0xa2, 0x61 } }
+
+ ## Include/Ppi/StorageSecurityCommand.h
+ gEdkiiPeiStorageSecurityCommandPpiGuid = { 0x35de0b4e, 0x30fb, 0x46c3, { 0xbd, 0x84, 0x1f, 0xdb, 0xa1, 0x58, 0xbb, 0x56 } }
+
+ ## Include/Ppi/AtaPassThru.h
+ gEdkiiPeiAtaPassThruPpiGuid = { 0xa16473fd, 0xd474, 0x4c89, { 0xae, 0xc7, 0x90, 0xb8, 0x3c, 0x73, 0x86, 0x9 } }
+
+ ## Include/Ppi/Debug.h
+ gEdkiiDebugPpiGuid = { 0x999e699c, 0xb013, 0x475e, { 0xb1, 0x7b, 0xf3, 0xa8, 0xae, 0x5c, 0x48, 0x75 } }
+
[Protocols]
## Load File protocol provides capability to load and unload EFI image into memory and execute it.
# Include/Protocol/LoadPe32Image.h
@@ -617,6 +603,10 @@
## Include/Protocol/AtaAtapiPolicy.h
gEdkiiAtaAtapiPolicyProtocolGuid = { 0xe59cd769, 0x5083, 0x4f26,{ 0x90, 0x94, 0x6c, 0x91, 0x9f, 0x91, 0x6c, 0x4e } }
+
+ ## Include/Protocol/PeCoffImageEmulator.h
+ gEdkiiPeCoffImageEmulatorProtocolGuid = { 0x96f46153, 0x97a7, 0x4793, { 0xac, 0xc1, 0xfa, 0x19, 0xbf, 0x78, 0xea, 0x97 } }
+
#
# [Error.gEfiMdeModulePkgTokenSpaceGuid]
# 0x80000001 | Invalid value provided.
@@ -720,14 +710,6 @@
# @Prompt Disable default keyboard layout in USB KeyBoard Driver.
gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200
- ## Indicates if backward compatibility to Framework HII and Framework FvHob is supported.
- # TRUE - Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.
- # the PeiCore will handle the framework FvHob and install FvInfo PPI for it.
- # FALSE - Setup Browser doesn't support GUID opcodes generated from Framework HII VFR file by VFR compiler.
- # the PeiCore will not handle the framework FvHob and install FvInfo PPI for it.
- # @Prompt Enable framework backward compatibility support.
- gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009
-
## Indicates if HelloWorld Application will print the verbose information.
# This PCD is a sample to explain FeatureFlag PCD usage.
# TRUE - HelloWorld Application will print the verbose information.
@@ -1011,14 +993,22 @@
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPoolType|0x0|UINT64|0x30001053
## This mask is to control Heap Guard behavior.
- # Note that due to the limit of pool memory implementation and the alignment
- # requirement of UEFI spec, BIT7 is a try-best setting which cannot guarantee
- # that the returned pool is exactly adjacent to head guard page or tail guard
- # page.
+ #
+ # Note:
+ # a) Heap Guard is for debug purpose and should not be enabled in product
+ # BIOS.
+ # b) Due to the limit of pool memory implementation and the alignment
+ # requirement of UEFI spec, BIT7 is a try-best setting which cannot
+ # guarantee that the returned pool is exactly adjacent to head guard
+ # page or tail guard page.
+ # c) UEFI freed-memory guard and UEFI pool/page guard cannot be enabled
+ # at the same time.
+ #
# BIT0 - Enable UEFI page guard.
# BIT1 - Enable UEFI pool guard.
# BIT2 - Enable SMM page guard.
# BIT3 - Enable SMM pool guard.
+ # BIT4 - Enable UEFI freed-memory guard (Use-After-Free memory detection).
# BIT6 - Enable non-stop mode.
# BIT7 - The direction of Guard Page for Pool Guard.
# 0 - The returned pool is near the tail guard page.
@@ -1045,23 +1035,10 @@
# @Prompt VPD base address.
gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010
- ## Maximum number of FV is supported by PeiCore's dispatching.
- # @Prompt Maximum number of FV supported by PeiCore.
- gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030
-
- ## Maximum File count in every FV is supported by PeiCore's dispatching.
- # PeiCore supported File type includes PEIM, Combined PEIM and FV.
- # @Prompt Maximum File count per FV supported by PeiCore.
- gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031
-
## Maximum stack size for PeiCore.
# @Prompt Maximum stack size for PeiCore.
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032
- ## Maximum PPI count is supported by PeiCore's PPI database.
- # @Prompt Maximum PPI count supported by PeiCore.
- gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033
-
## The maximum size of a single non-HwErr type variable.
# @Prompt Maximum variable size.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003
@@ -1158,6 +1135,13 @@
# @Prompt Serial port registers use MMIO.
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000
+ ## Indicates the access width for 16550 serial port registers.
+ # Default is 8-bit access mode.
+ # 8 - 16550 serial port registers are accessed in 8-bit width.
+ # 32 - 16550 serial port registers are accessed in 32-bit width.
+ # @Prompt Serial port register access width.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterAccessWidth|8|UINT8|0x00020007
+
## Indicates if the 16550 serial port hardware flow control will be enabled. Default is FALSE.
# TRUE - 16550 serial port hardware flow control will be enabled.
# FALSE - 16550 serial port hardware flow control will be disabled.
@@ -1591,9 +1575,17 @@
# @Prompt 64-bit Base address of flash FTW working block range.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010
- ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store.
- # The range is valid if non-zero. The memory range size must be PcdVariableStoreSize.
- # @Prompt Reserved memory range for EMU variable NV storage.
+ ## Indicates if Variable driver will enable emulated variable NV mode.
+ # If this PCD is configured to dynamic, its value should be set before Variable driver starts to work,
+ # otherwise default value will take effect.
+ # TRUE - An EMU variable NV storage will be allocated or reserved for NV variables.
+ # FALSE - No EMU variable NV storage will be allocated or reserved for NV variables.
+ # @Prompt EMU variable NV mode enable.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvModeEnable|FALSE|BOOLEAN|0x01100001
+
+ ## This PCD defines the base address of reserved memory range for EMU variable NV storage.
+ # A non-ZERO value indicates a valid range reserved with size given by PcdVariableStoreSize.
+ # @Prompt Base of reserved memory range for EMU variable NV storage.
gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008
## This PCD defines the times to print hello world string.
@@ -1999,12 +1991,6 @@
# @ValidList 0x80000001 | 0x0
gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001
- ## This dynamic PCD hold an address to point to the memory of page table. The page table establishes a 1:1
- # Virtual to Physical mapping according to the processor physical address bits.
- # @Prompt Identify Mapping Page Table pointer.
- # @ValidList 0x80000001 | 0x0
- gEfiMdeModulePkgTokenSpaceGuid.PcdIdentifyMappingPageTablePtr|0x0|UINT64|0x00030002
-
## This dynamic PCD holds the information if there is any test key used by the platform.
# @Prompt If there is any test key used by the platform.
gEfiMdeModulePkgTokenSpaceGuid.PcdTestKeyUsed|FALSE|BOOLEAN|0x00030003
@@ -2020,5 +2006,13 @@
# @Prompt NV Storage Default Value Buffer
gEfiMdeModulePkgTokenSpaceGuid.PcdNvStoreDefaultValueBuffer|{0x0}|VOID*|0x00030005
+ ## VPD type PCD allows a developer to point to an absolute physical address PcdVpdBaseAddress64
+ # to store PCD value. It will be DynamicExDefault only.
+ # It is used to set VPD region base address. So, it can't be DynamicExVpd PCD. Its value is
+ # required to be accessed in PcdDxe driver entry point. So, its value must be set in PEI phase.
+ # It can't depend on EFI variable service, and can't be DynamicExHii PCD.
+ # @Prompt 64bit VPD base address.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress64|0x0|UINT64|0x00030006
+
[UserExtensions.TianoCore."ExtraFiles"]
MdeModulePkgExtra.uni