X-Git-Url: https://git.proxmox.com/?a=blobdiff_plain;f=MdeModulePkg%2FMdeModulePkg.dec;h=74b870051c6716539dde48122f92b4b1cae8ae81;hb=9ba2869c7ec7567eabc15fe4c2b13d8c774ce282;hp=efd870b61828de45046206d1b1e022de96d80547;hpb=8a45f80edad4e2e1e23118833f92df4320b123ab;p=mirror_edk2.git
diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
index efd870b618..74b870051c 100644
--- a/MdeModulePkg/MdeModulePkg.dec
+++ b/MdeModulePkg/MdeModulePkg.dec
@@ -5,6 +5,7 @@
#
# Copyright (c) 2007 - 2016, Intel Corporation. All rights reserved.
# Copyright (c) 2016, Linaro Ltd. All rights reserved.
+# (C) Copyright 2016 Hewlett Packard Enterprise Development LP
# This program and the accompanying materials are licensed and made available under
# the terms and conditions of the BSD License that accompanies this distribution.
# The full text of the license may be found at
@@ -136,10 +137,6 @@
#
FileExplorerLib|Include/Library/FileExplorerLib.h
- ## @libraryclass Provides image decoding service.
- #
- ImageDecoderLib|Include/Library/ImageDecoderLib.h
-
## @libraryclass Provides interfaces about logo display.
#
BootLogoLib|Include/Library/BootLogoLib.h
@@ -152,6 +149,14 @@
#
PciHostBridgeLib|Include/Library/PciHostBridgeLib.h
+ ## @libraryclass Provides services to record memory profile of multilevel caller.
+ #
+ MemoryProfileLib|Include/Library/MemoryProfileLib.h
+
+ ## @libraryclass Provides an interface for performing UEFI Graphics Output Protocol Video blt operations.
+ ##
+ FrameBufferBltLib|Include/Library/FrameBufferBltLib.h
+
[Guids]
## MdeModule package token space guid
# Include/Guid/MdeModulePkgTokenSpace.h
@@ -326,6 +331,7 @@
## Include/Guid/MemoryProfile.h
gEdkiiMemoryProfileGuid = { 0x821c9a09, 0x541a, 0x40f6, { 0x9f, 0x43, 0xa, 0xd1, 0x93, 0xa1, 0x2c, 0xfe }}
+ gEdkiiSmmMemoryProfileGuid = { 0xe22bbcca, 0x516a, 0x46a8, { 0x80, 0xe2, 0x67, 0x45, 0xe8, 0x36, 0x93, 0xbd }}
## Include/Protocol/VarErrorFlag.h
gEdkiiVarErrorFlagGuid = { 0x4b37fe8, 0xf6ae, 0x480b, { 0xbd, 0xd5, 0x37, 0xd9, 0x8c, 0x5e, 0x89, 0xaa } }
@@ -346,6 +352,8 @@
## Include/Guid/RamDiskHii.h
gRamDiskFormSetGuid = { 0x2a46715f, 0x3581, 0x4a55, { 0x8e, 0x73, 0x2b, 0x76, 0x9a, 0xaa, 0x30, 0xc5 }}
+ ## Include/Guid/PiSmmCommunicationRegionTable.h
+ gEdkiiPiSmmCommunicationRegionTableGuid = { 0x4e28ca50, 0xd582, 0x44ac, {0xa1, 0x1f, 0xe3, 0xd5, 0x65, 0x26, 0xdb, 0x34}}
[Ppis]
## Include/Ppi/AtaController.h
@@ -387,6 +395,9 @@
## Include/Ppi/IpmiPpi.h
gPeiIpmiPpiGuid = { 0xa9731431, 0xd968, 0x4277, { 0xb7, 0x52, 0xa3, 0xa9, 0xa6, 0xae, 0x18, 0x98 }}
+ ## Include/Ppi/SdMmcHostController.h
+ gEdkiiPeiSdMmcHostControllerPpiGuid = { 0xb30dfeed, 0x947f, 0x4396, { 0xb1, 0x5a, 0xdf, 0xbd, 0xb9, 0x16, 0xdc, 0x24 }}
+
[Protocols]
## Load File protocol provides capability to load and unload EFI image into memory and execute it.
# Include/Protocol/LoadPe32Image.h
@@ -448,6 +459,7 @@
## Include/Protocol/FormBrowserEx.h
gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }
+ gEdkiiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }
## Include/Protocol/EbcVmTest.h
gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } }
@@ -480,7 +492,7 @@
gEdkiiSmmReadyToBootProtocolGuid = { 0x6e057ecf, 0xfa99, 0x4f39, { 0x95, 0xbc, 0x59, 0xf9, 0x92, 0x1d, 0x17, 0xe4 } }
## Include/Protocol/PlatformLogo.h
- gEdkiiPlatformLogoProtocolGuid = { 0x9b517978, 0xeba1, 0x44e7, { 0xba, 0x65, 0x7c, 0x2c, 0xd0, 0x8b, 0xf8, 0xe9 } }
+ gEdkiiPlatformLogoProtocolGuid = { 0x53cd299f, 0x2bc1, 0x40c0, { 0x8c, 0x07, 0x23, 0xf6, 0x4f, 0xdb, 0x30, 0xe0 } }
## Include/Protocol/FileExplorer.h
gEfiFileExplorerProtocolGuid = { 0x2C03C536, 0x4594, 0x4515, { 0x9E, 0x7A, 0xD3, 0xD2, 0x04, 0xFE, 0x13, 0x63 } }
@@ -489,6 +501,10 @@
gIpmiProtocolGuid = { 0xdbc6381f, 0x5554, 0x4d14, { 0x8f, 0xfd, 0x76, 0xd7, 0x87, 0xb8, 0xac, 0xbf } }
gSmmIpmiProtocolGuid = { 0x5169af60, 0x8c5a, 0x4243, { 0xb3, 0xe9, 0x56, 0xc5, 0x6d, 0x18, 0xee, 0x26 } }
+ ## PS/2 policy protocol abstracts the specific platform initialization and setting.
+ # Include/Protocol/Ps2Policy.h
+ gEfiPs2PolicyProtocolGuid = { 0x4DF19259, 0xDC71, 0x4D46, { 0xBE, 0xF1, 0x35, 0x7B, 0xB5, 0x78, 0xC4, 0x18 } }
+
#
# [Error.gEfiMdeModulePkgTokenSpaceGuid]
# 0x80000001 | Invalid value provided.
@@ -705,6 +721,14 @@
# @Prompt Enable S3 performance data support.
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064
+ ## Indicates if PS2 keyboard does a extended verification during start.
+ # Add this PCD mainly consider the use case of simulator. This PCD maybe set to FALSE for
+ # Extended verification will take some performance. It can be set to FALSE for boot performance.
+ # TRUE - Turn on PS2 keyboard extended verification.
+ # FALSE - Turn off PS2 keyboard extended verification.
+ # @Prompt Turn on PS2 Keyboard Extended Verification
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPs2KbdExtendedVerification|TRUE|BOOLEAN|0x00010072
+
## Indicates if Serial device uses half hand shake.
# TRUE - Serial device uses half hand shake.
# FALSE - Serial device doesn't use half hand shake.
@@ -719,6 +743,24 @@
# @Prompt Enable export HII data and configuration to be used in OS runtime.
gEfiMdeModulePkgTokenSpaceGuid.PcdHiiOsRuntimeSupport|TRUE|BOOLEAN|0x00010074
+ ## Indicates if PS2 mouse does a extended verification during start.
+ # Extended verification will take some performance. It can be set to FALSE for boot performance.
+ # TRUE - Turn on PS2 mouse extended verification.
+ # FALSE - Turn off PS2 mouse extended verification.
+ # @Prompt Turn on PS2 Mouse Extended Verification
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPs2MouseExtendedVerification|TRUE|BOOLEAN|0x00010075
+
+ ## Indicates whether 64-bit PCI MMIO BARs should degrade to 32-bit in the presence of an option ROM
+ # On X64 platforms, Option ROMs may contain code that executes in the context of a legacy BIOS (CSM),
+ # which requires that all PCI MMIO BARs are located below 4 GB
+ # TRUE - All PCI MMIO BARs of a device will be located below 4 GB if it has an option ROM
+ # FALSE - PCI MMIO BARs of a device may be located above 4 GB even if it has an option ROM
+ # @Prompt Degrade 64-bit PCI MMIO BARs for legacy BIOS option ROMs
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPciDegradeResourceForOptionRom|TRUE|BOOLEAN|0x0001003a
+
+[PcdsFeatureFlag.IA32, PcdsFeatureFlag.ARM, PcdsFeatureFlag.AARCH64]
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPciDegradeResourceForOptionRom|FALSE|BOOLEAN|0x0001003a
+
[PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]
## Indicates if DxeIpl should switch to long mode to enter DXE phase.
# It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore
@@ -869,9 +911,18 @@
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017
## Maximum number of performance log entries during PEI phase.
+ # Use PcdMaxPeiPerformanceLogEntries16 if the number of entries required is
+ # more than 255.
# @Prompt Maximum number of PEI performance log entries.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f
+ ## Maximum number of performance log entries during PEI phase.
+ # If set to 0, then PcdMaxPeiPerformanceLogEntries determines the number of
+ # entries. If greater than 0, then this PCD determines the number of entries,
+ # and PcdMaxPeiPerformanceLogEntries is ignored.
+ # @Prompt Maximum number of PEI performance log entries.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries16|0|UINT16|0x00010035
+
## RTC Update Timeout Value(microsecond).
# @Prompt RTC Update Timeout Value.
gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034
@@ -961,8 +1012,9 @@
## The mask is used to control memory profile behavior.
# BIT0 - Enable UEFI memory profile.
# BIT1 - Enable SMRAM profile.
+ # BIT7 - Disable recording at the start.
# @Prompt Memory Profile Property.
- # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask & 0xFC) == 0
+ # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask & 0x7C) == 0
gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask|0x0|UINT8|0x30001041
## This flag is to control which memory types of alloc info will be recorded by DxeCore & SmmCore.
@@ -992,6 +1044,20 @@
# @Prompt Memory profile memory type.
gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042
+ ## This PCD is to control which drivers need memory profile data.
+ # For example:
+ # One image only (Shell):
+ # Header GUID
+ # {0x04, 0x06, 0x14, 0x00, 0x83, 0xA5, 0x04, 0x7C, 0x3E, 0x9E, 0x1C, 0x4F, 0xAD, 0x65, 0xE0, 0x52, 0x68, 0xD0, 0xB4, 0xD1,
+ # 0x7F, 0xFF, 0x04, 0x00}
+ # Two or more images (Shell + WinNtSimpleFileSystem):
+ # {0x04, 0x06, 0x14, 0x00, 0x83, 0xA5, 0x04, 0x7C, 0x3E, 0x9E, 0x1C, 0x4F, 0xAD, 0x65, 0xE0, 0x52, 0x68, 0xD0, 0xB4, 0xD1,
+ # 0x7F, 0x01, 0x04, 0x00,
+ # 0x04, 0x06, 0x14, 0x00, 0x8B, 0xE1, 0x25, 0x9C, 0xBA, 0x76, 0xDA, 0x43, 0xA1, 0x32, 0xDB, 0xB0, 0x99, 0x7C, 0xEF, 0xEF,
+ # 0x7F, 0xFF, 0x04, 0x00}
+ # @Prompt Memory profile driver path.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileDriverPath|{0x0}|VOID*|0x00001043
+
## PCI Serial Device Info. It is an array of Device, Function, and Power Management
# information that describes the path that contains zero or more PCI to PCI briges
# followed by a PCI serial device. Each array entry is 4-bytes in length. The
@@ -1071,6 +1137,11 @@
# @Prompt Exposed ACPI table versions.
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiExposedTableVersions|0x3E|UINT32|0x0001004c
+ ## This PCD defines the MAX repair count.
+ # The default value is 0 that means infinite.
+ # @Prompt MAX repair count
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxRepairCount|0x00|UINT32|0x00010076
+
[PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
## This PCD defines the Console output row. The default value is 25 according to UEFI spec.
# This PCD could be set to 0 then console output would be at max column and max row.
@@ -1485,6 +1556,37 @@
# @Prompt Set NX for stack.
gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|FALSE|BOOLEAN|0x0001006f
+ ## This PCD specifies the PCI-based SD/MMC host controller mmio base address.
+ # Define the mmio base address of the pci-based SD/MMC host controller. If there are multiple SD/MMC
+ # host controllers, their mmio base addresses are calculated one by one from this base address.
+ # @Prompt Mmio base address of pci-based SD/MMC host controller.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSdMmcPciHostControllerMmioBase|0xd0000000|UINT32|0x30001043
+
+ ## Indicates if ACPI S3 will be enabled.
+ # TRUE - ACPI S3 will be enabled.
+ # FALSE - ACPI S3 will be disabled.
+ # @Prompt ACPI S3 Enable.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiS3Enable|TRUE|BOOLEAN|0x01100000
+
+ ## Specify memory size for boot script executor stack usage in S3 phase.
+ # The default size 32K. When changing the value make sure the memory size is large enough
+ # to meet boot script executor requirement in the S3 phase.
+ # @Prompt Reserved S3 Boot Script Stack ACPI Memory Size
+ gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptStackSize|0x8000|UINT32|0x02000000
+
+ ## Indicates if to use the optimized timing for best PS2 detection performance.
+ # Note this PCD could be set to TRUE for best boot performance and set to FALSE for best device compatibility.
+ # TRUE - Use the optimized timing for best PS2 detection performance.
+ # FALSE - Use the normal timing to detect PS2.
+ # @Prompt Enable fast PS2 detection
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFastPS2Detection|FALSE|BOOLEAN|0x30001044
+
+ ## This is recover file name in PEI phase.
+ # The file must be in the root directory.
+ # The file name must be the 8.3 format.
+ # The PCD data must be in UNICODE format.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryFileName|L"FVMAIN.FV"|VOID*|0x30001045
+
[PcdsPatchableInModule]
## Specify memory size with page number for PEI code when
# Loading Module at Fixed Address feature is enabled.