X-Git-Url: https://git.proxmox.com/?a=blobdiff_plain;f=MdeModulePkg%2FMdeModulePkg.dec;h=935554c5adc987431564c4a7bbf95324d7f553e4;hb=bd2388ab12984e0185d0c0c91729f2afdf631467;hp=efd870b61828de45046206d1b1e022de96d80547;hpb=8a45f80edad4e2e1e23118833f92df4320b123ab;p=mirror_edk2.git
diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
index efd870b618..935554c5ad 100644
--- a/MdeModulePkg/MdeModulePkg.dec
+++ b/MdeModulePkg/MdeModulePkg.dec
@@ -5,6 +5,7 @@
#
# Copyright (c) 2007 - 2016, Intel Corporation. All rights reserved.
# Copyright (c) 2016, Linaro Ltd. All rights reserved.
+# (C) Copyright 2016 Hewlett Packard Enterprise Development LP
# This program and the accompanying materials are licensed and made available under
# the terms and conditions of the BSD License that accompanies this distribution.
# The full text of the license may be found at
@@ -387,6 +388,9 @@
## Include/Ppi/IpmiPpi.h
gPeiIpmiPpiGuid = { 0xa9731431, 0xd968, 0x4277, { 0xb7, 0x52, 0xa3, 0xa9, 0xa6, 0xae, 0x18, 0x98 }}
+ ## Include/Ppi/SdMmcHostController.h
+ gEdkiiPeiSdMmcHostControllerPpiGuid = { 0xb30dfeed, 0x947f, 0x4396, { 0xb1, 0x5a, 0xdf, 0xbd, 0xb9, 0x16, 0xdc, 0x24 }}
+
[Protocols]
## Load File protocol provides capability to load and unload EFI image into memory and execute it.
# Include/Protocol/LoadPe32Image.h
@@ -489,6 +493,10 @@
gIpmiProtocolGuid = { 0xdbc6381f, 0x5554, 0x4d14, { 0x8f, 0xfd, 0x76, 0xd7, 0x87, 0xb8, 0xac, 0xbf } }
gSmmIpmiProtocolGuid = { 0x5169af60, 0x8c5a, 0x4243, { 0xb3, 0xe9, 0x56, 0xc5, 0x6d, 0x18, 0xee, 0x26 } }
+ ## PS/2 policy protocol abstracts the specific platform initialization and setting.
+ # Include/Protocol/Ps2Policy.h
+ gEfiPs2PolicyProtocolGuid = { 0x4DF19259, 0xDC71, 0x4D46, { 0xBE, 0xF1, 0x35, 0x7B, 0xB5, 0x78, 0xC4, 0x18 } }
+
#
# [Error.gEfiMdeModulePkgTokenSpaceGuid]
# 0x80000001 | Invalid value provided.
@@ -705,6 +713,14 @@
# @Prompt Enable S3 performance data support.
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064
+ ## Indicates if PS2 keyboard does a extended verification during start.
+ # Add this PCD mainly consider the use case of simulator. This PCD maybe set to FALSE for
+ # Extended verification will take some performance. It can be set to FALSE for boot performance.
+ # TRUE - Turn on PS2 keyboard extended verification.
+ # FALSE - Turn off PS2 keyboard extended verification.
+ # @Prompt Turn on PS2 Keyboard Extended Verification
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPs2KbdExtendedVerification|TRUE|BOOLEAN|0x00010072
+
## Indicates if Serial device uses half hand shake.
# TRUE - Serial device uses half hand shake.
# FALSE - Serial device doesn't use half hand shake.
@@ -719,6 +735,13 @@
# @Prompt Enable export HII data and configuration to be used in OS runtime.
gEfiMdeModulePkgTokenSpaceGuid.PcdHiiOsRuntimeSupport|TRUE|BOOLEAN|0x00010074
+ ## Indicates if PS2 mouse does a extended verification during start.
+ # Extended verification will take some performance. It can be set to FALSE for boot performance.
+ # TRUE - Turn on PS2 mouse extended verification.
+ # FALSE - Turn off PS2 mouse extended verification.
+ # @Prompt Turn on PS2 Mouse Extended Verification
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPs2MouseExtendedVerification|TRUE|BOOLEAN|0x00010075
+
[PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]
## Indicates if DxeIpl should switch to long mode to enter DXE phase.
# It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore
@@ -869,9 +892,18 @@
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017
## Maximum number of performance log entries during PEI phase.
+ # Use PcdMaxPeiPerformanceLogEntries16 if the number of entries required is
+ # more than 255.
# @Prompt Maximum number of PEI performance log entries.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f
+ ## Maximum number of performance log entries during PEI phase.
+ # If set to 0, then PcdMaxPeiPerformanceLogEntries determines the number of
+ # entries. If greater than 0, then this PCD determines the number of entries,
+ # and PcdMaxPeiPerformanceLogEntries is ignored.
+ # @Prompt Maximum number of PEI performance log entries.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries16|0|UINT16|0x00010035
+
## RTC Update Timeout Value(microsecond).
# @Prompt RTC Update Timeout Value.
gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034
@@ -1485,6 +1517,31 @@
# @Prompt Set NX for stack.
gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|FALSE|BOOLEAN|0x0001006f
+ ## This PCD specifies the PCI-based SD/MMC host controller mmio base address.
+ # Define the mmio base address of the pci-based SD/MMC host controller. If there are multiple SD/MMC
+ # host controllers, their mmio base addresses are calculated one by one from this base address.
+ # @Prompt Mmio base address of pci-based SD/MMC host controller.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSdMmcPciHostControllerMmioBase|0xd0000000|UINT32|0x30001043
+
+ ## Indicates if ACPI S3 will be enabled.
+ # TRUE - ACPI S3 will be enabled.
+ # FALSE - ACPI S3 will be disabled.
+ # @Prompt ACPI S3 Enable.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiS3Enable|TRUE|BOOLEAN|0x01100000
+
+ ## Specify memory size for boot script executor stack usage in S3 phase.
+ # The default size 32K. When changing the value make sure the memory size is large enough
+ # to meet boot script executor requirement in the S3 phase.
+ # @Prompt Reserved S3 Boot Script Stack ACPI Memory Size
+ gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptStackSize|0x8000|UINT32|0x02000000
+
+ ## Indicates if to use the optimized timing for best PS2 detection performance.
+ # Note this PCD could be set to TRUE for best boot performance and set to FALSE for best device compatibility.
+ # TRUE - Use the optimized timing for best PS2 detection performance.
+ # FALSE - Use the normal timing to detect PS2.
+ # @Prompt Enable fast PS2 detection
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFastPS2Detection|FALSE|BOOLEAN|0x30001044
+
[PcdsPatchableInModule]
## Specify memory size with page number for PEI code when
# Loading Module at Fixed Address feature is enabled.