X-Git-Url: https://git.proxmox.com/?a=blobdiff_plain;f=MdeModulePkg%2FMdeModulePkg.dec;h=9bbd0572f5bc190b7bdaa21cd33ee194de354bef;hb=8f7a05e1396657c8bd2948825f41d0fdf239e334;hp=74a699cbb7f74f0dcac9bca2b5842963a5f9e246;hpb=8f2613628acf601a2a17bb64bb49ef73f85cfe2c;p=mirror_edk2.git
diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
index 74a699cbb7..9bbd0572f5 100644
--- a/MdeModulePkg/MdeModulePkg.dec
+++ b/MdeModulePkg/MdeModulePkg.dec
@@ -3,7 +3,7 @@
# It also provides the definitions(including PPIs/PROTOCOLs/GUIDs and library classes)
# and libraries instances, which are used for those modules.
#
-# Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.
+# Copyright (c) 2007 - 2019, Intel Corporation. All rights reserved.
# Copyright (c) 2016, Linaro Ltd. All rights reserved.
# (C) Copyright 2016 Hewlett Packard Enterprise Development LP
# Copyright (c) 2017, AMD Incorporated. All rights reserved.
@@ -422,6 +422,9 @@
## Include/Guid/S3SmmInitDone.h
gEdkiiS3SmmInitDoneGuid = { 0x8f9d4825, 0x797d, 0x48fc, { 0x84, 0x71, 0x84, 0x50, 0x25, 0x79, 0x2e, 0xf6 } }
+ ## Include/Guid/S3StorageDeviceInitList.h
+ gS3StorageDeviceInitListGuid = { 0x310e9b8c, 0xcf90, 0x421e, { 0x8e, 0x9b, 0x9e, 0xef, 0xb6, 0x17, 0xc8, 0xef } }
+
[Ppis]
## Include/Ppi/AtaController.h
gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}
@@ -480,6 +483,18 @@
## Include/Ppi/NvmExpressHostController.h
gEdkiiPeiNvmExpressHostControllerPpiGuid = { 0xcae3aa63, 0x676f, 0x4da3, { 0xbd, 0x50, 0x6c, 0xc5, 0xed, 0xde, 0x9a, 0xad } }
+ ## Include/Ppi/AtaAhciController.h
+ gEdkiiPeiAtaAhciHostControllerPpiGuid = { 0x61dd33ea, 0x421f, 0x4cc0, { 0x89, 0x29, 0xff, 0xee, 0xa9, 0xa1, 0xa2, 0x61 } }
+
+ ## Include/Ppi/StorageSecurityCommand.h
+ gEdkiiPeiStorageSecurityCommandPpiGuid = { 0x35de0b4e, 0x30fb, 0x46c3, { 0xbd, 0x84, 0x1f, 0xdb, 0xa1, 0x58, 0xbb, 0x56 } }
+
+ ## Include/Ppi/AtaPassThru.h
+ gEdkiiPeiAtaPassThruPpiGuid = { 0xa16473fd, 0xd474, 0x4c89, { 0xae, 0xc7, 0x90, 0xb8, 0x3c, 0x73, 0x86, 0x9 } }
+
+ ## Include/Ppi/Debug.h
+ gEdkiiDebugPpiGuid = { 0x999e699c, 0xb013, 0x475e, { 0xb1, 0x7b, 0xf3, 0xa8, 0xae, 0x5c, 0x48, 0x75 } }
+
[Protocols]
## Load File protocol provides capability to load and unload EFI image into memory and execute it.
# Include/Protocol/LoadPe32Image.h
@@ -955,6 +970,8 @@
# free pages for all of them. The page allocation for the type related to
# cleared bits keeps the same as ususal.
#
+ # This PCD is only valid if BIT0 and/or BIT2 are set in PcdHeapGuardPropertyMask.
+ #
# Below is bit mask for this PCD: (Order is same as UEFI spec)
# EfiReservedMemoryType 0x0000000000000001
# EfiLoaderCode 0x0000000000000002
@@ -984,6 +1001,8 @@
# if there's enough free memory for all of them. The pool allocation for the
# type related to cleared bits keeps the same as ususal.
#
+ # This PCD is only valid if BIT1 and/or BIT3 are set in PcdHeapGuardPropertyMask.
+ #
# Below is bit mask for this PCD: (Order is same as UEFI spec)
# EfiReservedMemoryType 0x0000000000000001
# EfiLoaderCode 0x0000000000000002
@@ -1007,14 +1026,22 @@
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPoolType|0x0|UINT64|0x30001053
## This mask is to control Heap Guard behavior.
- # Note that due to the limit of pool memory implementation and the alignment
- # requirement of UEFI spec, BIT7 is a try-best setting which cannot guarantee
- # that the returned pool is exactly adjacent to head guard page or tail guard
- # page.
+ #
+ # Note:
+ # a) Heap Guard is for debug purpose and should not be enabled in product
+ # BIOS.
+ # b) Due to the limit of pool memory implementation and the alignment
+ # requirement of UEFI spec, BIT7 is a try-best setting which cannot
+ # guarantee that the returned pool is exactly adjacent to head guard
+ # page or tail guard page.
+ # c) UEFI freed-memory guard and UEFI pool/page guard cannot be enabled
+ # at the same time.
+ #
# BIT0 - Enable UEFI page guard.
# BIT1 - Enable UEFI pool guard.
# BIT2 - Enable SMM page guard.
# BIT3 - Enable SMM pool guard.
+ # BIT4 - Enable UEFI freed-memory guard (Use-After-Free memory detection).
# BIT6 - Enable non-stop mode.
# BIT7 - The direction of Guard Page for Pool Guard.
# 0 - The returned pool is near the tail guard page.
@@ -1041,23 +1068,10 @@
# @Prompt VPD base address.
gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010
- ## Maximum number of FV is supported by PeiCore's dispatching.
- # @Prompt Maximum number of FV supported by PeiCore.
- gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030
-
- ## Maximum File count in every FV is supported by PeiCore's dispatching.
- # PeiCore supported File type includes PEIM, Combined PEIM and FV.
- # @Prompt Maximum File count per FV supported by PeiCore.
- gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031
-
## Maximum stack size for PeiCore.
# @Prompt Maximum stack size for PeiCore.
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032
- ## Maximum PPI count is supported by PeiCore's PPI database.
- # @Prompt Maximum PPI count supported by PeiCore.
- gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033
-
## The maximum size of a single non-HwErr type variable.
# @Prompt Maximum variable size.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003
@@ -1288,17 +1302,23 @@
## Set image protection policy. The policy is bitwise.
# If a bit is set, the image will be protected by DxeCore if it is aligned.
# The code section becomes read-only, and the data section becomes non-executable.
- # If a bit is clear, the image will not be protected.
+ # If a bit is clear, nothing will be done to image code/data sections.
# BIT0 - Image from unknown device.
# BIT1 - Image from firmware volume.
+ #
+ # Note: If a bit is cleared, the data section could be still non-executable if
+ # PcdDxeNxMemoryProtectionPolicy is enabled for EfiLoaderData, EfiBootServicesData
+ # and/or EfiRuntimeServicesData.
+ #
# @Prompt Set image protection policy.
# @ValidRange 0x80000002 | 0x00000000 - 0x0000001F
gEfiMdeModulePkgTokenSpaceGuid.PcdImageProtectionPolicy|0x00000002|UINT32|0x00001047
## Set DXE memory protection policy. The policy is bitwise.
# If a bit is set, memory regions of the associated type will be mapped
- # non-executable.
- #
+ # non-executable.
+ # If a bit is cleared, nothing will be done to associated type of memory.
+ #
# Below is bit mask for this PCD: (Order is same as UEFI spec)
# EfiReservedMemoryType 0x0001
# EfiLoaderCode 0x0002
@@ -1581,9 +1601,17 @@
# @Prompt 64-bit Base address of flash FTW working block range.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010
- ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store.
- # The range is valid if non-zero. The memory range size must be PcdVariableStoreSize.
- # @Prompt Reserved memory range for EMU variable NV storage.
+ ## Indicates if Variable driver will enable emulated variable NV mode.
+ # If this PCD is configured to dynamic, its value should be set before Variable driver starts to work,
+ # otherwise default value will take effect.
+ # TRUE - An EMU variable NV storage will be allocated or reserved for NV variables.
+ # FALSE - No EMU variable NV storage will be allocated or reserved for NV variables.
+ # @Prompt EMU variable NV mode enable.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvModeEnable|FALSE|BOOLEAN|0x01100001
+
+ ## This PCD defines the base address of reserved memory range for EMU variable NV storage.
+ # A non-ZERO value indicates a valid range reserved with size given by PcdVariableStoreSize.
+ # @Prompt Base of reserved memory range for EMU variable NV storage.
gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008
## This PCD defines the times to print hello world string.
@@ -1890,8 +1918,13 @@
# For the DxeIpl and the DxeCore are both X64, set NX for stack feature also require PcdDxeIplBuildPageTables be TRUE.
# For the DxeIpl and the DxeCore are both IA32 (PcdDxeIplSwitchToLongMode is FALSE), set NX for stack feature also require
# IA32 PAE is supported and Execute Disable Bit is available.
- # TRUE - to set NX for stack.
- # FALSE - Not to set NX for stack.
+ #
+ # TRUE - Set NX for stack.
+ # FALSE - Do nothing for stack.
+ #
+ # Note: If this PCD is set to FALSE, NX could be still applied to stack due to PcdDxeNxMemoryProtectionPolicy enabled for
+ # EfiBootServicesData.
+ #
# @Prompt Set NX for stack.
gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|FALSE|BOOLEAN|0x0001006f
@@ -1984,12 +2017,6 @@
# @ValidList 0x80000001 | 0x0
gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001
- ## This dynamic PCD hold an address to point to the memory of page table. The page table establishes a 1:1
- # Virtual to Physical mapping according to the processor physical address bits.
- # @Prompt Identify Mapping Page Table pointer.
- # @ValidList 0x80000001 | 0x0
- gEfiMdeModulePkgTokenSpaceGuid.PcdIdentifyMappingPageTablePtr|0x0|UINT64|0x00030002
-
## This dynamic PCD holds the information if there is any test key used by the platform.
# @Prompt If there is any test key used by the platform.
gEfiMdeModulePkgTokenSpaceGuid.PcdTestKeyUsed|FALSE|BOOLEAN|0x00030003
@@ -2005,5 +2032,13 @@
# @Prompt NV Storage Default Value Buffer
gEfiMdeModulePkgTokenSpaceGuid.PcdNvStoreDefaultValueBuffer|{0x0}|VOID*|0x00030005
+ ## VPD type PCD allows a developer to point to an absolute physical address PcdVpdBaseAddress64
+ # to store PCD value. It will be DynamicExDefault only.
+ # It is used to set VPD region base address. So, it can't be DynamicExVpd PCD. Its value is
+ # required to be accessed in PcdDxe driver entry point. So, its value must be set in PEI phase.
+ # It can't depend on EFI variable service, and can't be DynamicExHii PCD.
+ # @Prompt 64bit VPD base address.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress64|0x0|UINT64|0x00030006
+
[UserExtensions.TianoCore."ExtraFiles"]
MdeModulePkgExtra.uni