X-Git-Url: https://git.proxmox.com/?a=blobdiff_plain;f=doc%2Fuser%2Froutemap.rst;h=9e4d7a611aced3268fad9dff21a664ca47889a02;hb=277eb2e580ff10e19b8ee8773929af382547b7c6;hp=ef7aef9c5ee2d7e0160c4e65477f37eeec4561ca;hpb=79d2f64ee16d21a36718215dbf948031121513ac;p=mirror_frr.git

diff --git a/doc/user/routemap.rst b/doc/user/routemap.rst
index ef7aef9c5..9e4d7a611 100644
--- a/doc/user/routemap.rst
+++ b/doc/user/routemap.rst
@@ -205,6 +205,11 @@ Route Map Match Command
   interface name specified if the neighbor was specified
   in this manner.
 
+.. clicmd:: match peer PEER_GROUP_NAME
+
+  This is a BGP specific match command. Matches the peer
+  group name specified for the peer in question.
+
 .. clicmd:: match source-protocol PROTOCOL_NAME
 
   This is a ZEBRA specific match command.  Matches the
@@ -239,7 +244,9 @@ Route Map Set Command
    Set a tag on the matched route. This tag value can be from (1-4294967295).
    Additionally if you have compiled with the :option:`--enable-realms`
    configure option. Tag values from (1-255) are sent to the Linux kernel as a
-   realm value. Then route policy can be applied. See the tc man page.
+   realm value. Then route policy can be applied. See the tc man page.  As
+   a note realms cannot currently be used with the installation of nexthops
+   as nexthop groups in the linux kernel.
 
 .. clicmd:: set ip next-hop IPV4_ADDRESS
 
@@ -287,9 +294,9 @@ Route Map Set Command
 
    Subtract the BGP local preference from an existing `local_pref`.
 
-.. clicmd:: set distance DISTANCE
+.. clicmd:: set distance (1-255)
 
-   Set the Administrative distance to DISTANCE to use for the route.
+   Set the Administrative distance to use for the route.
    This is only locally significant and will not be dispersed to peers.
 
 .. clicmd:: set weight WEIGHT
@@ -303,6 +310,11 @@ Route Map Set Command
    trip time or `+rtt`/`-rtt` to add/subtract the round trip time to/from the
    MED.
 
+.. clicmd:: set aigp-metric <igp-metric|(1-4294967295)>
+
+   Set the BGP attribute AIGP to a specific value. If ``igp-metric`` is specified,
+   then the value is taken from the IGP protocol, otherwise an arbitrary value.
+
 .. clicmd:: set as-path prepend AS_PATH
 
    Set the BGP AS path to prepend.
@@ -332,6 +344,9 @@ Route Map Set Command
    Set the color of a SR-TE Policy to be applied to a learned route. The SR-TE
    Policy is uniquely determined by the color and the BGP nexthop.
 
+.. clicmd:: set l3vpn next-hop encapsulation gre
+
+   Accept L3VPN traffic over GRE encapsulation.
 
 .. _route-map-call-command: