X-Git-Url: https://git.proxmox.com/?a=blobdiff_plain;f=drivers%2Fide%2FKconfig;h=d633081fa4c58123bc8769e7439af651039cb415;hb=be9bf30c73184e0f1e4e0a50fb193d2a551bf75e;hp=ed2bc87f475b797a47e688428989bb4d8177d40a;hpb=638cbac8de9b57345a9446e107b6aebc10b58970;p=mirror_ubuntu-zesty-kernel.git

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index ed2bc87f475b..d633081fa4c5 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -52,9 +52,9 @@ config IDE
 
 if IDE
 
-config IDE_MAX_HWIFS 
+config IDE_MAX_HWIFS
 	int "Max IDE interfaces"
-	depends on ALPHA || SUPERH
+	depends on ALPHA || SUPERH || IA64
 	default 4
 	help
 	  This is the maximum number of IDE hardware interfaces that will
@@ -162,8 +162,8 @@ config BLK_DEV_IDECS
 	tristate "PCMCIA IDE support"
 	depends on PCMCIA
 	help
-	  Support for outboard IDE disks, tape drives, and CD-ROM drives
-	  connected through a  PCMCIA card.
+	  Support for Compact Flash cards, outboard IDE disks, tape drives,
+	  and CD-ROM drives connected through a PCMCIA card.
 
 config BLK_DEV_IDECD
 	tristate "Include IDE/ATAPI CDROM support"
@@ -267,7 +267,7 @@ config IDE_TASK_IOCTL
 	help
 	  This is a direct raw access to the media.  It is a complex but
 	  elegant solution to test and validate the domain of the hardware and
-	  perform below the driver data recover if needed.  This is the most
+	  perform below the driver data recovery if needed.  This is the most
 	  basic form of media-forensics.
 
 	  If you are unsure, say N here.
@@ -525,7 +525,7 @@ config BLK_DEV_CS5520
 	tristate "Cyrix CS5510/20 MediaGX chipset support (VERY EXPERIMENTAL)"
 	depends on EXPERIMENTAL
 	help
-	  Include support for PIO tuning an virtual DMA on the Cyrix MediaGX 
+	  Include support for PIO tuning and virtual DMA on the Cyrix MediaGX
 	  5510/5520 chipset. This will automatically be detected and
 	  configured if found.
 
@@ -625,7 +625,7 @@ config BLK_DEV_NS87415
 	tristate "NS87415 chipset support"
 	help
 	  This driver adds detection and support for the NS87415 chip
-	  (used in SPARC64, among others).
+	  (used mainly on SPARC64 and PA-RISC machines).
 
 	  Please read the comments at the top of <file:drivers/ide/pci/ns87415.c>.
 
@@ -662,7 +662,7 @@ config PDC202XX_BURST
 
 	  It was originally designed for the PDC20246/Ultra33, whose BIOS will
 	  only setup UDMA on the first two PDC20246 cards.  It has also been
-	  used succesfully on a PDC20265/Ultra100, allowing use of UDMA modes
+	  used successfully on a PDC20265/Ultra100, allowing use of UDMA modes
 	  when the PDC20265 BIOS has been disabled (for faster boot up).
 
 	  Please read the comments at the top of
@@ -673,13 +673,6 @@ config PDC202XX_BURST
 config BLK_DEV_PDC202XX_NEW
 	tristate "PROMISE PDC202{68|69|70|71|75|76|77} support"
 
-# FIXME - probably wants to be one for old and for new
-config PDC202XX_FORCE
-	bool "Enable controller even if disabled by BIOS"
-	depends on BLK_DEV_PDC202XX_NEW
-	help
-	  Enable the PDC202xx controller even if it has been disabled in the BIOS setup.
-
 config BLK_DEV_SVWKS
 	tristate "ServerWorks OSB4/CSB5/CSB6 chipsets support"
 	help
@@ -722,7 +715,7 @@ config BLK_DEV_SIS5513
 config BLK_DEV_SLC90E66
 	tristate "SLC90E66 chipset support"
 	help
-	  This driver ensures (U)DMA support for Victroy66 SouthBridges for
+	  This driver ensures (U)DMA support for Victory66 SouthBridges for
 	  SMsC with Intel NorthBridges.  This is an Ultra66 based chipset.
 	  The nice thing about it is that you can mix Ultra/DMA/PIO devices
 	  and it will handle timing cycles.  Since this is an improved
@@ -807,14 +800,6 @@ config BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
        depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX
 endchoice
 
-config BLK_DEV_IDE_AU1XXX_BURSTABLE_ON
-        bool "Enable burstable Mode on DbDMA"
-        default false
-        depends BLK_DEV_IDE_AU1XXX
-        help
-          This option enable the burstable Flag on DbDMA controller
-          (cf. "AMD Alchemy 'Au1200' Processor Data Book - PRELIMINARY").
-
 config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ
        int "Maximum transfer size (KB) per request (up to 128)"
        default "128"
@@ -940,7 +925,7 @@ config BLK_DEV_Q40IDE
 
 config BLK_DEV_MPC8xx_IDE
 	bool "MPC8xx IDE support"
-	depends on 8xx
+	depends on 8xx && IDE=y && BLK_DEV_IDE=y
 	help
 	  This option provides support for IDE on Motorola MPC8xx Systems.
 	  Please see 'Type of MPC8xx IDE interface' for details.
@@ -1068,7 +1053,7 @@ config IDEDMA_IVB
 	  in that mode with an 80c ribbon.
 
 	  If you are experiencing compatibility or performance problems, you
-	  MAY try to answering Y here. However, it does not necessarily solve
+	  MAY try to answer Y here. However, it does not necessarily solve
 	  any of your problems, it could even cause more of them.
 
 	  It is normally safe to answer Y; however, the default is N.