X-Git-Url: https://git.proxmox.com/?a=blobdiff_plain;f=drivers%2Fpci%2Fquirks.c;h=aea4d49bcce3b7442b59d318c82cfff55a5bcf4a;hb=ead2bfeb7f739d2ad6e09dc1343f0da51feb7f51;hp=4970f47be72c55241eec95961abfb96a8f2f32f1;hpb=2e9abdd9bad485970b37cd53a82f92702054984c;p=mirror_ubuntu-artful-kernel.git

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 4970f47be72c..aea4d49bcce3 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -24,6 +24,17 @@
 #include <linux/acpi.h>
 #include "pci.h"
 
+/* The Mellanox Tavor device gives false positive parity errors
+ * Mark this device with a broken_parity_status, to allow
+ * PCI scanning code to "skip" this now blacklisted device.
+ */
+static void __devinit quirk_mellanox_tavor(struct pci_dev *dev)
+{
+	dev->broken_parity_status = 1;	/* This device gives false positives */
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR,quirk_mellanox_tavor);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE,quirk_mellanox_tavor);
+
 /* Deal with broken BIOS'es that neglect to enable passive release,
    which can cause problems in combination with the 82441FX/PPro MTRRs */
 static void __devinit quirk_passive_release(struct pci_dev *dev)
@@ -592,7 +603,7 @@ static void __init quirk_amd_8131_ioapic(struct pci_dev *dev)
                 pci_write_config_byte( dev, AMD8131_MISC, tmp);
         }
 } 
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_APIC,         quirk_amd_8131_ioapic ); 
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic);
 
 static void __init quirk_svw_msi(struct pci_dev *dev)
 {
@@ -634,6 +645,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C686_4,	quirk_vi
  * non-x86 architectures (yes Via exists on PPC among other places),
  * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
  * interrupts delivered properly.
+ *
+ * Some of the on-chip devices are actually '586 devices' so they are
+ * listed here.
  */
 static void quirk_via_irq(struct pci_dev *dev)
 {
@@ -642,13 +656,19 @@ static void quirk_via_irq(struct pci_dev *dev)
 	new_irq = dev->irq & 0xf;
 	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
 	if (new_irq != irq) {
-		printk(KERN_INFO "PCI: Via IRQ fixup for %s, from %d to %d\n",
+		printk(KERN_INFO "PCI: VIA IRQ fixup for %s, from %d to %d\n",
 			pci_name(dev), irq, new_irq);
 		udelay(15);	/* unknown if delay really needed */
 		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
 	}
 }
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, quirk_via_irq);
 
 /*
  * VIA VT82C598 has its device ID settable and many BIOSes
@@ -864,6 +884,39 @@ static void __init quirk_eisa_bridge(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82375,	quirk_eisa_bridge );
 
+/*
+ * On the MSI-K8T-Neo2Fir Board, the internal Soundcard is disabled
+ * when a PCI-Soundcard is added. The BIOS only gives Options
+ * "Disabled" and "AUTO". This Quirk Sets the corresponding
+ * Register-Value to enable the Soundcard.
+ *
+ * FIXME: Presently this quirk will run on anything that has an 8237
+ * which isn't correct, we need to check DMI tables or something in
+ * order to make sure it only runs on the MSI-K8T-Neo2Fir.  Because it
+ * runs everywhere at present we suppress the printk output in most
+ * irrelevant cases.
+ */
+static void __init k8t_sound_hostbridge(struct pci_dev *dev)
+{
+	unsigned char val;
+
+	pci_read_config_byte(dev, 0x50, &val);
+	if (val == 0x88 || val == 0xc8) {
+		/* Assume it's probably a MSI-K8T-Neo2Fir */
+		printk(KERN_INFO "PCI: MSI-K8T-Neo2Fir, attempting to turn soundcard ON\n");
+		pci_write_config_byte(dev, 0x50, val & (~0x40));
+
+		/* Verify the Change for Status output */
+		pci_read_config_byte(dev, 0x50, &val);
+		if (val & 0x40)
+			printk(KERN_INFO "PCI: MSI-K8T-Neo2Fir, soundcard still off\n");
+		else
+			printk(KERN_INFO "PCI: MSI-K8T-Neo2Fir, soundcard on\n");
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, k8t_sound_hostbridge);
+
+#ifndef CONFIG_ACPI_SLEEP
 /*
  * On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge
  * is not activated. The myth is that Asus said that they do not want the
@@ -875,8 +928,12 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82375,	quirk_e
  * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it 
  * becomes necessary to do this tweak in two steps -- I've chosen the Host
  * bridge as trigger.
+ *
+ * Actually, leaving it unhidden and not redoing the quirk over suspend2ram
+ * will cause thermal management to break down, and causing machine to
+ * overheat.
  */
-static int __initdata asus_hides_smbus = 0;
+static int __initdata asus_hides_smbus;
 
 static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev)
 {
@@ -921,6 +978,7 @@ static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev)
 		if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB) {
 			switch (dev->subsystem_device) {
 			case 0x1882: /* M6V notebook */
+			case 0x1977: /* A6VA notebook */
 				asus_hides_smbus = 1;
 			}
 		}
@@ -999,6 +1057,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82801BA_0,	asu
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82801CA_12,	asus_hides_smbus_lpc );
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82801DB_12,	asus_hides_smbus_lpc );
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82801EB_0,	asus_hides_smbus_lpc );
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_ICH6_1,	asus_hides_smbus_lpc );
 
 static void __init asus_hides_smbus_lpc_ich6(struct pci_dev *dev)
 {
@@ -1017,6 +1076,8 @@ static void __init asus_hides_smbus_lpc_ich6(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_ICH6_1,	asus_hides_smbus_lpc_ich6 );
 
+#endif
+
 /*
  * SiS 96x south bridge: BIOS typically hides SMBus device...
  */