X-Git-Url: https://git.proxmox.com/?a=blobdiff_plain;f=drivers%2Fvideo%2Fstifb.c;h=f98be301140cdf5be7e06376dd03888ef505a192;hb=b4de123a0bc4a3f0c90899864d51299628729952;hp=c97709ecbad0af458a66532ffcd5f70397bd9c86;hpb=15700770ef7c5d12e2f1659d2ddbeb3f658d9f37;p=mirror_ubuntu-kernels.git

diff --git a/drivers/video/stifb.c b/drivers/video/stifb.c
index c97709ecbad0..f98be301140c 100644
--- a/drivers/video/stifb.c
+++ b/drivers/video/stifb.c
@@ -505,16 +505,24 @@ ngleSetupAttrPlanes(struct stifb_info *fb, int BufferNumber)
 static void
 rattlerSetupPlanes(struct stifb_info *fb)
 {
+	int saved_id, y;
+
+ 	/* Write RAMDAC pixel read mask register so all overlay
+	 * planes are display-enabled.  (CRX24 uses Bt462 pixel
+	 * read mask register for overlay planes, not image planes).
+	 */
 	CRX24_SETUP_RAMDAC(fb);
     
-	/* replacement for: SETUP_FB(fb, CRX24_OVERLAY_PLANES); */
-	WRITE_WORD(0x83000300, fb, REG_14);
-	SETUP_HW(fb);
-	WRITE_BYTE(1, fb, REG_16b1);
+	/* change fb->id temporarily to fool SETUP_FB() */
+	saved_id = fb->id;
+	fb->id = CRX24_OVERLAY_PLANES;
+	SETUP_FB(fb);
+	fb->id = saved_id;
+
+	for (y = 0; y < fb->info.var.yres; ++y)
+		memset(fb->info.screen_base + y * fb->info.fix.line_length,
+			0xff, fb->info.var.xres * fb->info.var.bits_per_pixel/8);
 
-	fb_memset((void*)fb->info.fix.smem_start, 0xff,
-		fb->info.var.yres*fb->info.fix.line_length);
-    
 	CRX24_SET_OVLY_MASK(fb);
 	SETUP_FB(fb);
 }
@@ -1100,13 +1108,18 @@ stifb_init_fb(struct sti_struct *sti, int bpp_pref)
 	/* only supported cards are allowed */
 	switch (fb->id) {
 	case CRT_ID_VISUALIZE_EG:
-		/* look for a double buffering device like e.g. the 
-		   "INTERNAL_EG_DX1024" in the RDI precisionbook laptop
-		   which won't work. The same device in non-double 
-		   buffering mode returns "INTERNAL_EG_X1024". */
-		if (strstr(sti->outptr.dev_name, "EG_DX")) {
-		   printk(KERN_WARNING 
-			"stifb: ignoring '%s'. Disable double buffering in IPL menu.\n",
+		/* Visualize cards can run either in "double buffer" or
+ 		  "standard" mode. Depending on the mode, the card reports
+		  a different device name, e.g. "INTERNAL_EG_DX1024" in double
+		  buffer mode and "INTERNAL_EG_X1024" in standard mode.
+		  Since this driver only supports standard mode, we check
+		  if the device name contains the string "DX" and tell the
+		  user how to reconfigure the card. */
+		if (strstr(sti->outptr.dev_name, "DX")) {
+		   printk(KERN_WARNING "WARNING: stifb framebuffer driver does not "
+			"support '%s' in double-buffer mode.\n"
+			KERN_WARNING "WARNING: Please disable the double-buffer mode "
+			"in IPL menu (the PARISC-BIOS).\n",
 			sti->outptr.dev_name);
 		   goto out_err0;
 		}