X-Git-Url: https://git.proxmox.com/?a=blobdiff_plain;f=pve-network.adoc;h=38a3c7eb9f6ae6149511dea400a333c07f55b8f0;hb=7ea4226669a2c572f324b774f91851039142c2b0;hp=62cad85886ad583b1f765074fc8a5f0c494972fc;hpb=1ed908523455ab17c9a3309de312962bbe45189f;p=pve-docs.git

diff --git a/pve-network.adoc b/pve-network.adoc
index 62cad85..38a3c7e 100644
--- a/pve-network.adoc
+++ b/pve-network.adoc
@@ -83,8 +83,8 @@ Default Configuration using a Bridge
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 The installation program creates a single bridge named `vmbr0`, which
-is connected to the first Ethernet card `eno0`. The corresponding
-configuration in `/etc/network/interfaces` looks like this:
+is connected to the first Ethernet card. The corresponding
+configuration in `/etc/network/interfaces` might look like this:
 
 ----
 auto lo
@@ -162,7 +162,7 @@ auto lo
 iface lo inet loopback
 
 auto eno0
-#real IP adress 
+#real IP address
 iface eno1 inet static
         address  192.168.10.2
         netmask  255.255.255.0
@@ -247,8 +247,13 @@ slaves in the single logical bonded interface such that different
 network-peers use different MAC addresses for their network packet
 traffic.
 
-For the most setups the active-backup are the best choice or if your
-switch support LACP "IEEE 802.3ad" this mode should be preferred.
+If your switch support the LACP (IEEE 802.3ad) protocol then we recommend using
+the corresponding bonding mode (802.3ad). Otherwise you should generally use the 
+active-backup mode. +
+// http://lists.linux-ha.org/pipermail/linux-ha/2013-January/046295.html
+If you intend to run your cluster network on the bonding interfaces, then you
+have to use active-passive mode on the bonding interfaces, other modes are
+unsupported.
 
 The following bond configuration can be used as distributed/shared
 storage network. The benefit would be that you get more speed and the
@@ -276,7 +281,7 @@ auto vmbr0
 iface vmbr0 inet static
         address  10.10.10.2
         netmask  255.255.255.0
-	gateway  10.10.10.1
+        gateway  10.10.10.1
         bridge_ports eno1
         bridge_stp off
         bridge_fd 0
@@ -297,7 +302,7 @@ iface eno1 inet manual
 iface eno2 inet manual
 
 auto bond0
-iface bond0 inet maunal
+iface bond0 inet manual
       slaves eno1 eno2
       bond_miimon 100
       bond_mode 802.3ad
@@ -307,7 +312,7 @@ auto vmbr0
 iface vmbr0 inet static
         address  10.10.10.2
         netmask  255.255.255.0
-	gateway  10.10.10.1
+        gateway  10.10.10.1
         bridge_ports bond0
         bridge_stp off
         bridge_fd 0
@@ -316,5 +321,5 @@ iface vmbr0 inet static
 
 ////
 TODO: explain IPv6 support?
-TODO: explan OVS
+TODO: explain OVS
 ////