mxser: remove info message from probe

There is a dev_info in ->probe which prints device's name, bus and slot
numbers. All these can be fetched from the lspci output. So remove this
useless print.

This eliminates the whole mxser_cardinfo::name field.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-48-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index 83c795acdb1969d25b4dbaf576c2182d0ae15f96..04a39c1f13bbe7085c409ed7a045874c03f8c592 100644 (file)
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -190,38 +190,37 @@ static const struct {
 #define UART_INFO_NUM  ARRAY_SIZE(Gpci_uart_info)
 
 struct mxser_cardinfo {
-       char *name;
        unsigned int nports;
        unsigned int flags;
 };
 
 static const struct mxser_cardinfo mxser_cards[] = {
-/* 0*/ { "C168H/PCI series",   8, },
-       { "C104H/PCI series",   4, },
-       { "CP-132 series",      2, },
-       { "CP-114 series",      4, },
-       { "CT-114 series",      4, },
-/* 5*/ { "CP-102 series",      2, MXSER_HIGHBAUD },
-       { "CP-104U series",     4, },
-       { "CP-168U series",     8, },
-       { "CP-132U series",     2, },
-       { "CP-134U series",     4, },
-/*10*/ { "CP-104JU series",    4, },
-       { "Moxa UC7000 Serial", 8, },           /* RC7000 */
-       { "CP-118U series",     8, },
-       { "CP-102UL series",    2, },
-       { "CP-102U series",     2, },
-/*15*/ { "CP-118EL series",    8, },
-       { "CP-168EL series",    8, },
-       { "CP-104EL series",    4, },
-       { "CB-108 series",      8, },
-       { "CB-114 series",      4, },
-/*20*/ { "CB-134I series",     4, },
-       { "CP-138U series",     8, },
-       { "POS-104UL series",   4, },
-       { "CP-114UL series",    4, },
-       { "CP-102UF series",    2, },
-/*25*/ { "CP-112UL series",    2, },
+/* 0*/ { 8, },
+       { 4, },
+       { 2, },
+       { 4, },
+       { 4, },
+/* 5*/ { 2, MXSER_HIGHBAUD },
+       { 4, },
+       { 8, },
+       { 2, },
+       { 4, },
+/*10*/ { 4, },
+       { 8, },         /* RC7000 */
+       { 8, },
+       { 2, },
+       { 2, },
+/*15*/ { 8, },
+       { 8, },
+       { 4, },
+       { 8, },
+       { 4, },
+/*20*/ { 4, },
+       { 8, },
+       { 4, },
+       { 4, },
+       { 2, },
+/*25*/ { 2, },
 };
 
 /* driver_data correspond to the lines in the structure above
@@ -1961,9 +1960,6 @@ static int mxser_probe(struct pci_dev *pdev,
 
        brd = &mxser_boards[i];
        brd->idx = i * MXSER_PORTS_PER_BOARD;
-       dev_info(&pdev->dev, "found MOXA %s board (BusNo=%d, DevNo=%d)\n",
-               mxser_cards[ent->driver_data].name,
-               pdev->bus->number, PCI_SLOT(pdev->devfn));
 
        retval = pcim_enable_device(pdev);
        if (retval) {