package-0
---------
-The Intel RAPL technology allows two constraints, short term and long term,
-with two different time windows to be applied to each power zone. Thus for
-each zone there are 2 attributes representing the constraint names, 2 power
-limits and 2 attributes representing the sizes of the time windows. Such that,
-constraint_j_* attributes correspond to the jth constraint (j = 0,1).
+Depending on different power zones, the Intel RAPL technology allows
+one or multiple constraints like short term, long term and peak power,
+with different time windows to be applied to each power zone.
+All the zones contain attributes representing the constraint names,
+power limits and the sizes of the time windows. Note that time window
+is not applicable to peak power. Here, constraint_j_* attributes
+correspond to the jth constraint (j = 0,1,2).
For example::
constraint_1_name
constraint_1_power_limit_uw
constraint_1_time_window_us
+ constraint_2_name
+ constraint_2_power_limit_uw
+ constraint_2_time_window_us
Power Zone Attributes
=====================
#define POWER_HIGH_LOCK BIT_ULL(63)
#define POWER_LOW_LOCK BIT(31)
+#define POWER_LIMIT4_MASK 0x1FFF
+
#define TIME_WINDOW1_MASK (0x7FULL<<17)
#define TIME_WINDOW2_MASK (0x7FULL<<49)
static const char pl1_name[] = "long_term";
static const char pl2_name[] = "short_term";
+static const char pl4_name[] = "peak_power";
#define power_zone_to_rapl_domain(_zone) \
container_of(_zone, struct rapl_domain, power_zone)
case PL2_ENABLE:
rapl_write_data_raw(rd, POWER_LIMIT2, power_limit);
break;
+ case PL4_ENABLE:
+ rapl_write_data_raw(rd, POWER_LIMIT4, power_limit);
+ break;
default:
ret = -EINVAL;
}
case PL2_ENABLE:
prim = POWER_LIMIT2;
break;
+ case PL4_ENABLE:
+ prim = POWER_LIMIT4;
+ break;
default:
put_online_cpus();
return -EINVAL;
case PL2_ENABLE:
ret = rapl_read_data_raw(rd, TIME_WINDOW2, true, &val);
break;
+ case PL4_ENABLE:
+ /*
+ * Time window parameter is not applicable for PL4 entry
+ * so assigining '0' as default value.
+ */
+ val = 0;
+ break;
default:
put_online_cpus();
return -EINVAL;
case PL2_ENABLE:
prim = MAX_POWER;
break;
+ case PL4_ENABLE:
+ prim = MAX_POWER;
+ break;
default:
put_online_cpus();
return -EINVAL;
else
*data = val;
+ /* As a generalization rule, PL4 would be around two times PL2. */
+ if (rd->rpl[id].prim_id == PL4_ENABLE)
+ *data = *data * 2;
+
put_online_cpus();
return ret;
rd->id = i;
rd->rpl[0].prim_id = PL1_ENABLE;
rd->rpl[0].name = pl1_name;
- /* some domain may support two power limits */
- if (rp->priv->limits[i] == 2) {
+
+ /*
+ * The PL2 power domain is applicable for limits two
+ * and limits three
+ */
+ if (rp->priv->limits[i] >= 2) {
rd->rpl[1].prim_id = PL2_ENABLE;
rd->rpl[1].name = pl2_name;
}
+ /* Enable PL4 domain if the total power limits are three */
+ if (rp->priv->limits[i] == 3) {
+ rd->rpl[2].prim_id = PL4_ENABLE;
+ rd->rpl[2].name = pl4_name;
+ }
+
for (j = 0; j < RAPL_DOMAIN_REG_MAX; j++)
rd->regs[j] = rp->priv->regs[i][j];
RAPL_DOMAIN_REG_LIMIT, POWER_UNIT, 0),
PRIMITIVE_INFO_INIT(POWER_LIMIT2, POWER_LIMIT2_MASK, 32,
RAPL_DOMAIN_REG_LIMIT, POWER_UNIT, 0),
+ PRIMITIVE_INFO_INIT(POWER_LIMIT4, POWER_LIMIT4_MASK, 0,
+ RAPL_DOMAIN_REG_PL4, POWER_UNIT, 0),
PRIMITIVE_INFO_INIT(FW_LOCK, POWER_LOW_LOCK, 31,
RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0),
PRIMITIVE_INFO_INIT(PL1_ENABLE, POWER_LIMIT1_ENABLE, 15,
RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0),
PRIMITIVE_INFO_INIT(PL2_CLAMP, POWER_LIMIT2_CLAMP, 48,
RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0),
+ PRIMITIVE_INFO_INIT(PL4_ENABLE, POWER_LIMIT4_MASK, 0,
+ RAPL_DOMAIN_REG_PL4, ARBITRARY_UNIT, 0),
PRIMITIVE_INFO_INIT(TIME_WINDOW1, TIME_WINDOW1_MASK, 17,
RAPL_DOMAIN_REG_LIMIT, TIME_UNIT, 0),
PRIMITIVE_INFO_INIT(TIME_WINDOW2, TIME_WINDOW2_MASK, 49,
if (find_nr_power_limit(rd) > 1) {
rapl_write_data_raw(rd, PL2_ENABLE, 0);
rapl_write_data_raw(rd, PL2_CLAMP, 0);
+ rapl_write_data_raw(rd, PL4_ENABLE, 0);
}
if (rd->id == RAPL_DOMAIN_PACKAGE) {
rd_package = rd;
if (ret)
rd->rpl[i].last_power_limit = 0;
break;
+ case PL4_ENABLE:
+ ret = rapl_read_data_raw(rd,
+ POWER_LIMIT4, true,
+ &rd->rpl[i].last_power_limit);
+ if (ret)
+ rd->rpl[i].last_power_limit = 0;
+ break;
}
}
}
rapl_write_data_raw(rd, POWER_LIMIT2,
rd->rpl[i].last_power_limit);
break;
+ case PL4_ENABLE:
+ if (rd->rpl[i].last_power_limit)
+ rapl_write_data_raw(rd, POWER_LIMIT4,
+ rd->rpl[i].last_power_limit);
+ break;
}
}
}
/* Local defines */
#define MSR_PLATFORM_POWER_LIMIT 0x0000065C
+#define MSR_VR_CURRENT_CONFIG 0x00000601
/* private data for RAPL MSR Interface */
static struct rapl_if_priv rapl_msr_priv = {
return ra->err;
}
+/* List of verified CPUs. */
+static const struct x86_cpu_id pl4_support_ids[] = {
+ { X86_VENDOR_INTEL, 6, INTEL_FAM6_TIGERLAKE_L, X86_FEATURE_ANY },
+ {}
+};
+
static int rapl_msr_probe(struct platform_device *pdev)
{
+ const struct x86_cpu_id *id = x86_match_cpu(pl4_support_ids);
int ret;
rapl_msr_priv.read_raw = rapl_msr_read_raw;
rapl_msr_priv.write_raw = rapl_msr_write_raw;
+ if (id) {
+ rapl_msr_priv.limits[RAPL_DOMAIN_PACKAGE] = 3;
+ rapl_msr_priv.regs[RAPL_DOMAIN_PACKAGE][RAPL_DOMAIN_REG_PL4] =
+ MSR_VR_CURRENT_CONFIG;
+ pr_info("PL4 support detected.\n");
+ }
+
rapl_msr_priv.control_type = powercap_register_control_type(NULL, "intel-rapl", NULL);
if (IS_ERR(rapl_msr_priv.control_type)) {
pr_debug("failed to register powercap control_type.\n");