#interrupt-cells = <3>;
};
- timer@c1109940 {
- compatible = "amlogic,meson6-timer";
- reg = <0xc1109940 0x18>;
- interrupts = <0 10 1>;
- };
-
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
- wdt: watchdog@c1109900 {
- compatible = "amlogic,meson6-wdt";
- reg = <0xc1109900 0x8>;
- interrupts = <0 0 1>;
- };
-
- uart_AO: serial@c81004c0 {
- compatible = "amlogic,meson-uart";
- reg = <0xc81004c0 0x18>;
- interrupts = <0 90 1>;
- clocks = <&clk81>;
- status = "disabled";
- };
-
- uart_A: serial@c11084c0 {
- compatible = "amlogic,meson-uart";
- reg = <0xc11084c0 0x18>;
- interrupts = <0 26 1>;
- clocks = <&clk81>;
- status = "disabled";
- };
-
- uart_B: serial@c11084dc {
- compatible = "amlogic,meson-uart";
- reg = <0xc11084dc 0x18>;
- interrupts = <0 75 1>;
- clocks = <&clk81>;
- status = "disabled";
- };
-
- uart_C: serial@c1108700 {
- compatible = "amlogic,meson-uart";
- reg = <0xc1108700 0x18>;
- interrupts = <0 93 1>;
- clocks = <&clk81>;
- status = "disabled";
- };
-
- i2c_AO: i2c@c8100500 {
- compatible = "amlogic,meson6-i2c";
- reg = <0xc8100500 0x20>;
- interrupts = <0 92 1>;
- clocks = <&clk81>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c_A: i2c@c1108500 {
- compatible = "amlogic,meson6-i2c";
- reg = <0xc1108500 0x20>;
- interrupts = <0 21 1>;
- clocks = <&clk81>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c_B: i2c@c11087c0 {
- compatible = "amlogic,meson6-i2c";
- reg = <0xc11087c0 0x20>;
- interrupts = <0 128 1>;
- clocks = <&clk81>;
+ cbus: cbus@c1100000 {
+ compatible = "simple-bus";
+ reg = <0xc1100000 0x200000>;
#address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
+ #size-cells = <1>;
+ ranges = <0x0 0xc1100000 0x200000>;
+
+ uart_A: serial@84c0 {
+ compatible = "amlogic,meson-uart";
+ reg = <0x84c0 0x18>;
+ interrupts = <0 26 1>;
+ status = "disabled";
+ };
+
+ uart_B: serial@84dc {
+ compatible = "amlogic,meson-uart";
+ reg = <0x84dc 0x18>;
+ interrupts = <0 75 1>;
+ status = "disabled";
+ };
+
+ i2c_A: i2c@8500 {
+ compatible = "amlogic,meson6-i2c";
+ reg = <0x8500 0x20>;
+ interrupts = <0 21 1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart_C: serial@8700 {
+ compatible = "amlogic,meson-uart";
+ reg = <0x8700 0x18>;
+ interrupts = <0 93 1>;
+ status = "disabled";
+ };
+
+ i2c_B: i2c@87c0 {
+ compatible = "amlogic,meson6-i2c";
+ reg = <0x87c0 0x20>;
+ interrupts = <0 128 1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spifc: spi@8c80 {
+ compatible = "amlogic,meson6-spifc";
+ reg = <0x8c80 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ wdt: watchdog@9900 {
+ compatible = "amlogic,meson6-wdt";
+ reg = <0x9900 0x8>;
+ interrupts = <0 0 1>;
+ };
+
+ timer@9940 {
+ compatible = "amlogic,meson6-timer";
+ reg = <0x9940 0x18>;
+ interrupts = <0 10 1>;
+ };
};
- ir_receiver: ir-receiver@c8100480 {
- compatible= "amlogic,meson6-ir";
- reg = <0xc8100480 0x20>;
- interrupts = <0 15 1>;
- status = "disabled";
- };
-
- spifc: spi@c1108c80 {
- compatible = "amlogic,meson6-spifc";
- reg = <0xc1108c80 0x80>;
+ aobus: aobus@c8100000 {
+ compatible = "simple-bus";
+ reg = <0xc8100000 0x100000>;
#address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clk81>;
- status = "disabled";
+ #size-cells = <1>;
+ ranges = <0x0 0xc8100000 0x100000>;
+
+ ir_receiver: ir-receiver@480 {
+ compatible= "amlogic,meson6-ir";
+ reg = <0x480 0x20>;
+ interrupts = <0 15 1>;
+ status = "disabled";
+ };
+
+ uart_AO: serial@4c0 {
+ compatible = "amlogic,meson-uart";
+ reg = <0x4c0 0x18>;
+ interrupts = <0 90 1>;
+ status = "disabled";
+ };
+
+ i2c_AO: i2c@500 {
+ compatible = "amlogic,meson6-i2c";
+ reg = <0x500 0x20>;
+ interrupts = <0 92 1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
ethmac: ethernet@c9410000 {
0xc1108108 0x4>;
interrupts = <0 8 1>;
interrupt-names = "macirq";
- clocks = <&clk81>;
- clock-names = "stmmaceth";
status = "disabled";
};
};
model = "Amlogic Meson6 SoC";
compatible = "amlogic,meson6";
- interrupt-parent = <&gic>;
-
cpus {
#address-cells = <1>;
#size-cells = <0>;
* OTHER DEALINGS IN THE SOFTWARE.
*/
+#include <dt-bindings/clock/meson8b-clkc.h>
#include <dt-bindings/gpio/meson8-gpio.h>
/include/ "meson.dtsi"
model = "Amlogic Meson8 SoC";
compatible = "amlogic,meson8";
- interrupt-parent = <&gic>;
-
cpus {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x203>;
};
};
+}; /* end of / */
+
+&aobus {
+ pinctrl_aobus: pinctrl@84 {
+ compatible = "amlogic,meson8-aobus-pinctrl";
+ reg = <0x84 0xc>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio_ao: ao-bank@14 {
+ reg = <0x14 0x4>,
+ <0x2c 0x4>,
+ <0x24 0x8>;
+ reg-names = "mux", "pull", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_aobus 0 120 16>;
+ };
+
+ uart_ao_a_pins: uart_ao_a {
+ mux {
+ groups = "uart_tx_ao_a", "uart_rx_ao_a";
+ function = "uart_ao";
+ };
+ };
+
+ i2c_ao_pins: i2c_mst_ao {
+ mux {
+ groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
+ function = "i2c_mst_ao";
+ };
+ };
+ };
+};
- clk81: clk@0 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <141666666>;
+&cbus {
+ clkc: clock-controller@4000 {
+ #clock-cells = <1>;
+ compatible = "amlogic,meson8-clkc";
+ reg = <0x8000 0x4>, <0x4000 0x460>;
};
- pinctrl_cbus: pinctrl@c1109880 {
+ pinctrl_cbus: pinctrl@9880 {
compatible = "amlogic,meson8-cbus-pinctrl";
- reg = <0xc1109880 0x10>;
+ reg = <0x9880 0x10>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
- gpio: banks@c11080b0 {
- reg = <0xc11080b0 0x28>,
- <0xc11080e8 0x18>,
- <0xc1108120 0x18>,
- <0xc1108030 0x30>;
+ gpio: banks@80b0 {
+ reg = <0x80b0 0x28>,
+ <0x80e8 0x18>,
+ <0x8120 0x18>,
+ <0x8030 0x30>;
reg-names = "mux", "pull", "pull-enable", "gpio";
gpio-controller;
#gpio-cells = <2>;
};
};
};
-
- pinctrl_aobus: pinctrl@c8100084 {
- compatible = "amlogic,meson8-aobus-pinctrl";
- reg = <0xc8100084 0xc>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- gpio_ao: ao-bank@c1108030 {
- reg = <0xc8100014 0x4>,
- <0xc810002c 0x4>,
- <0xc8100024 0x8>;
- reg-names = "mux", "pull", "gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pinctrl_aobus 0 120 16>;
- };
-
- uart_ao_a_pins: uart_ao_a {
- mux {
- groups = "uart_tx_ao_a", "uart_rx_ao_a";
- function = "uart_ao";
- };
- };
-
- i2c_ao_pins: i2c_mst_ao {
- mux {
- groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
- function = "i2c_mst_ao";
- };
- };
- };
-}; /* end of / */
+};
+
+ðmac {
+ clocks = <&clkc CLKID_CLK81>;
+ clock-names = "stmmaceth";
+};
+
+&i2c_AO {
+ clocks = <&clkc CLKID_CLK81>;
+};
+
+&i2c_A {
+ clocks = <&clkc CLKID_CLK81>;
+};
+
+&i2c_B {
+ clocks = <&clkc CLKID_CLK81>;
+};
+
+&L2 {
+ arm,data-latency = <3 3 3>;
+ arm,tag-latency = <2 2 2>;
+ arm,filter-ranges = <0x100000 0xc0000000>;
+};
+
+&spifc {
+ clocks = <&clkc CLKID_CLK81>;
+};
+
+&uart_AO {
+ clocks = <&clkc CLKID_CLK81>;
+};
+
+&uart_A {
+ clocks = <&clkc CLKID_CLK81>;
+};
+
+&uart_B {
+ clocks = <&clkc CLKID_CLK81>;
+};
+
+&uart_C {
+ clocks = <&clkc CLKID_CLK81>;
+};
#include <dt-bindings/clock/meson8b-clkc.h>
#include <dt-bindings/gpio/meson8b-gpio.h>
#include <dt-bindings/reset/amlogic,meson8b-reset.h>
-#include "skeleton.dtsi"
+#include "meson.dtsi"
/ {
- interrupt-parent = <&gic>;
-
cpus {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x203>;
};
};
+}; /* end of / */
- soc {
- compatible = "simple-bus";
+&aobus {
+ pinctrl_aobus: pinctrl@84 {
+ compatible = "amlogic,meson8b-aobus-pinctrl";
+ reg = <0x84 0xc>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
- L2: l2-cache-controller@c4200000 {
- compatible = "arm,pl310-cache";
- reg = <0xc4200000 0x1000>;
- cache-unified;
- cache-level = <2>;
- };
-
- gic: interrupt-controller@c4301000 {
- compatible = "arm,cortex-a9-gic";
- reg = <0xc4301000 0x1000>,
- <0xc4300100 0x0100>;
- interrupt-controller;
- #interrupt-cells = <3>;
+ gpio_ao: ao-bank@14 {
+ reg = <0x14 0x4>,
+ <0x2c 0x4>,
+ <0x24 0x8>;
+ reg-names = "mux", "pull", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_aobus 0 130 16>;
};
- reset: reset-controller@c1104404 {
- compatible = "amlogic,meson8b-reset";
- reg = <0xc1104404 0x20>;
- #reset-cells = <1>;
+ uart_ao_a_pins: uart_ao_a {
+ mux {
+ groups = "uart_tx_ao_a", "uart_rx_ao_a";
+ function = "uart_ao";
+ };
};
+ };
+};
- wdt: watchdog@c1109900 {
- compatible = "amlogic,meson8b-wdt";
- reg = <0xc1109900 0x8>;
- interrupts = <0 0 1>;
- };
+&cbus {
+ clkc: clock-controller@4000 {
+ #clock-cells = <1>;
+ compatible = "amlogic,meson8b-clkc";
+ reg = <0x8000 0x4>, <0x4000 0x460>;
+ };
- timer@c1109940 {
- compatible = "amlogic,meson6-timer";
- reg = <0xc1109940 0x18>;
- interrupts = <0 10 1>;
- };
+ reset: reset-controller@4404 {
+ compatible = "amlogic,meson8b-reset";
+ reg = <0x4404 0x20>;
+ #reset-cells = <1>;
+ };
- uart_AO: serial@c81004c0 {
- compatible = "amlogic,meson-uart";
- reg = <0xc81004c0 0x18>;
- interrupts = <0 90 1>;
- clocks = <&clkc CLKID_CLK81>;
- status = "disabled";
- };
+ pwm_ab: pwm@8550 {
+ compatible = "amlogic,meson8b-pwm";
+ reg = <0x8550 0x10>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
- uart_A: serial@c11084c0 {
- compatible = "amlogic,meson-uart";
- reg = <0xc11084c0 0x18>;
- interrupts = <0 26 1>;
- clocks = <&clkc CLKID_CLK81>;
- status = "disabled";
- };
+ pwm_cd: pwm@8650 {
+ compatible = "amlogic,meson8b-pwm";
+ reg = <0x8650 0x10>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
- uart_B: serial@c11084dc {
- compatible = "amlogic,meson-uart";
- reg = <0xc11084dc 0x18>;
- interrupts = <0 75 1>;
- clocks = <&clkc CLKID_CLK81>;
- status = "disabled";
- };
+ pwm_ef: pwm@86c0 {
+ compatible = "amlogic,meson8b-pwm";
+ reg = <0x86c0 0x10>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
- uart_C: serial@c1108700 {
- compatible = "amlogic,meson-uart";
- reg = <0xc1108700 0x18>;
- interrupts = <0 93 1>;
- clocks = <&clkc CLKID_CLK81>;
- status = "disabled";
- };
+ wdt: watchdog@9900 {
+ compatible = "amlogic,meson8b-wdt";
+ reg = <0x9900 0x8>;
+ interrupts = <0 0 1>;
+ };
- clkc: clock-controller@c1104000 {
- #clock-cells = <1>;
- compatible = "amlogic,meson8b-clkc";
- reg = <0xc1108000 0x4>, <0xc1104000 0x460>;
- };
+ pinctrl_cbus: pinctrl@9880 {
+ compatible = "amlogic,meson8b-cbus-pinctrl";
+ reg = <0x9880 0x10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
- pwm_ab: pwm@8550 {
- compatible = "amlogic,meson8b-pwm";
- reg = <0xc1108550 0x10>;
- #pwm-cells = <3>;
- status = "disabled";
+ gpio: banks@80b0 {
+ reg = <0x80b0 0x28>,
+ <0x80e8 0x18>,
+ <0x8120 0x18>,
+ <0x8030 0x38>;
+ reg-names = "mux", "pull", "pull-enable", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_cbus 0 0 130>;
};
+ };
+};
- pwm_cd: pwm@8650 {
- compatible = "amlogic,meson8b-pwm";
- reg = <0xc1108650 0x10>;
- #pwm-cells = <3>;
- status = "disabled";
- };
+&L2 {
+ arm,data-latency = <3 3 3>;
+ arm,tag-latency = <2 2 2>;
+ arm,filter-ranges = <0x100000 0xc0000000>;
+};
- pwm_ef: pwm@86c0 {
- compatible = "amlogic,meson8b-pwm";
- reg = <0xc11086c0 0x10>;
- #pwm-cells = <3>;
- status = "disabled";
- };
+&uart_AO {
+ clocks = <&clkc CLKID_CLK81>;
+};
- pinctrl_cbus: pinctrl@c1109880 {
- compatible = "amlogic,meson8b-cbus-pinctrl";
- reg = <0xc1109880 0x10>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- gpio: banks@c11080b0 {
- reg = <0xc11080b0 0x28>,
- <0xc11080e8 0x18>,
- <0xc1108120 0x18>,
- <0xc1108030 0x38>;
- reg-names = "mux", "pull", "pull-enable", "gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pinctrl_cbus 0 0 130>;
- };
- };
+&uart_A {
+ clocks = <&clkc CLKID_CLK81>;
+};
- pinctrl_aobus: pinctrl@c8100084 {
- compatible = "amlogic,meson8b-aobus-pinctrl";
- reg = <0xc8100084 0xc>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- gpio_ao: ao-bank@c1108030 {
- reg = <0xc8100014 0x4>,
- <0xc810002c 0x4>,
- <0xc8100024 0x8>;
- reg-names = "mux", "pull", "gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pinctrl_aobus 0 130 16>;
- };
+&uart_B {
+ clocks = <&clkc CLKID_CLK81>;
+};
- uart_ao_a_pins: uart_ao_a {
- mux {
- groups = "uart_tx_ao_a", "uart_rx_ao_a";
- function = "uart_ao";
- };
- };
- };
- };
-}; /* end of / */
+&uart_C {
+ clocks = <&clkc CLKID_CLK81>;
+};
projects / mirror_ubuntu-artful-kernel.git / commitdiff