Unify includes in moved fault.c.
Modify Makefiles to pick up unified file.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
# Makefile for the linux i386-specific parts of the memory manager.
#
-obj-y := init_32.o pgtable_32.o fault_32.o ioremap.o extable.o pageattr.o mmap.o
+obj-y := init_32.o pgtable_32.o fault.o ioremap.o extable.o pageattr.o mmap.o
obj-$(CONFIG_NUMA) += discontig_32.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
# Makefile for the linux x86_64-specific parts of the memory manager.
#
-obj-y := init_64.o fault_64.o ioremap.o extable.o pageattr.o mmap.o
+obj-y := init_64.o fault.o ioremap.o extable.o pageattr.o mmap.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_NUMA) += numa_64.o
obj-$(CONFIG_K8_NUMA) += k8topology_64.o
--- /dev/null
+/*
+ * Copyright (C) 1995 Linus Torvalds
+ * Copyright (C) 2001,2002 Andi Kleen, SuSE Labs.
+ */
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/vt_kern.h> /* For unblank_screen() */
+#include <linux/compiler.h>
+#include <linux/highmem.h>
+#include <linux/bootmem.h> /* for max_low_pfn */
+#include <linux/vmalloc.h>
+#include <linux/module.h>
+#include <linux/kprobes.h>
+#include <linux/uaccess.h>
+#include <linux/kdebug.h>
+
+#include <asm/system.h>
+#include <asm/desc.h>
+#include <asm/segment.h>
+#include <asm/pgalloc.h>
+#include <asm/smp.h>
+#include <asm/tlbflush.h>
+#include <asm/proto.h>
+#include <asm-generic/sections.h>
+
+/*
+ * Page fault error code bits
+ * bit 0 == 0 means no page found, 1 means protection fault
+ * bit 1 == 0 means read, 1 means write
+ * bit 2 == 0 means kernel, 1 means user-mode
+ * bit 3 == 1 means use of reserved bit detected
+ * bit 4 == 1 means fault was an instruction fetch
+ */
+#define PF_PROT (1<<0)
+#define PF_WRITE (1<<1)
+#define PF_USER (1<<2)
+#define PF_RSVD (1<<3)
+#define PF_INSTR (1<<4)
+
+static inline int notify_page_fault(struct pt_regs *regs)
+{
+#ifdef CONFIG_KPROBES
+ int ret = 0;
+
+ /* kprobe_running() needs smp_processor_id() */
+#ifdef CONFIG_X86_32
+ if (!user_mode_vm(regs)) {
+#else
+ if (!user_mode(regs)) {
+#endif
+ preempt_disable();
+ if (kprobe_running() && kprobe_fault_handler(regs, 14))
+ ret = 1;
+ preempt_enable();
+ }
+
+ return ret;
+#else
+ return 0;
+#endif
+}
+
+/*
+ * X86_32
+ * Sometimes AMD Athlon/Opteron CPUs report invalid exceptions on prefetch.
+ * Check that here and ignore it.
+ *
+ * X86_64
+ * Sometimes the CPU reports invalid exceptions on prefetch.
+ * Check that here and ignore it.
+ *
+ * Opcode checker based on code by Richard Brunner
+ */
+static int is_prefetch(struct pt_regs *regs, unsigned long addr,
+ unsigned long error_code)
+{
+ unsigned char *instr;
+ int scan_more = 1;
+ int prefetch = 0;
+ unsigned char *max_instr;
+
+#ifdef CONFIG_X86_32
+# ifdef CONFIG_X86_PAE
+ /* If it was a exec fault on NX page, ignore */
+ if (nx_enabled && (error_code & PF_INSTR))
+ return 0;
+# else
+ return 0;
+# endif
+#else /* CONFIG_X86_64 */
+ /* If it was a exec fault on NX page, ignore */
+ if (error_code & PF_INSTR)
+ return 0;
+#endif
+
+ instr = (unsigned char *)convert_ip_to_linear(current, regs);
+ max_instr = instr + 15;
+
+ if (user_mode(regs) && instr >= (unsigned char *)TASK_SIZE)
+ return 0;
+
+ while (scan_more && instr < max_instr) {
+ unsigned char opcode;
+ unsigned char instr_hi;
+ unsigned char instr_lo;
+
+ if (probe_kernel_address(instr, opcode))
+ break;
+
+ instr_hi = opcode & 0xf0;
+ instr_lo = opcode & 0x0f;
+ instr++;
+
+ switch (instr_hi) {
+ case 0x20:
+ case 0x30:
+ /*
+ * Values 0x26,0x2E,0x36,0x3E are valid x86 prefixes.
+ * In X86_64 long mode, the CPU will signal invalid
+ * opcode if some of these prefixes are present so
+ * X86_64 will never get here anyway
+ */
+ scan_more = ((instr_lo & 7) == 0x6);
+ break;
+#ifdef CONFIG_X86_64
+ case 0x40:
+ /*
+ * In AMD64 long mode 0x40..0x4F are valid REX prefixes
+ * Need to figure out under what instruction mode the
+ * instruction was issued. Could check the LDT for lm,
+ * but for now it's good enough to assume that long
+ * mode only uses well known segments or kernel.
+ */
+ scan_more = (!user_mode(regs)) || (regs->cs == __USER_CS);
+ break;
+#endif
+ case 0x60:
+ /* 0x64 thru 0x67 are valid prefixes in all modes. */
+ scan_more = (instr_lo & 0xC) == 0x4;
+ break;
+ case 0xF0:
+ /* 0xF0, 0xF2, 0xF3 are valid prefixes in all modes. */
+ scan_more = !instr_lo || (instr_lo>>1) == 1;
+ break;
+ case 0x00:
+ /* Prefetch instruction is 0x0F0D or 0x0F18 */
+ scan_more = 0;
+
+ if (probe_kernel_address(instr, opcode))
+ break;
+ prefetch = (instr_lo == 0xF) &&
+ (opcode == 0x0D || opcode == 0x18);
+ break;
+ default:
+ scan_more = 0;
+ break;
+ }
+ }
+ return prefetch;
+}
+
+static void force_sig_info_fault(int si_signo, int si_code,
+ unsigned long address, struct task_struct *tsk)
+{
+ siginfo_t info;
+
+ info.si_signo = si_signo;
+ info.si_errno = 0;
+ info.si_code = si_code;
+ info.si_addr = (void __user *)address;
+ force_sig_info(si_signo, &info, tsk);
+}
+
+#ifdef CONFIG_X86_64
+static int bad_address(void *p)
+{
+ unsigned long dummy;
+ return probe_kernel_address((unsigned long *)p, dummy);
+}
+#endif
+
+void dump_pagetable(unsigned long address)
+{
+#ifdef CONFIG_X86_32
+ __typeof__(pte_val(__pte(0))) page;
+
+ page = read_cr3();
+ page = ((__typeof__(page) *) __va(page))[address >> PGDIR_SHIFT];
+#ifdef CONFIG_X86_PAE
+ printk("*pdpt = %016Lx ", page);
+ if ((page >> PAGE_SHIFT) < max_low_pfn
+ && page & _PAGE_PRESENT) {
+ page &= PAGE_MASK;
+ page = ((__typeof__(page) *) __va(page))[(address >> PMD_SHIFT)
+ & (PTRS_PER_PMD - 1)];
+ printk(KERN_CONT "*pde = %016Lx ", page);
+ page &= ~_PAGE_NX;
+ }
+#else
+ printk("*pde = %08lx ", page);
+#endif
+
+ /*
+ * We must not directly access the pte in the highpte
+ * case if the page table is located in highmem.
+ * And let's rather not kmap-atomic the pte, just in case
+ * it's allocated already.
+ */
+ if ((page >> PAGE_SHIFT) < max_low_pfn
+ && (page & _PAGE_PRESENT)
+ && !(page & _PAGE_PSE)) {
+ page &= PAGE_MASK;
+ page = ((__typeof__(page) *) __va(page))[(address >> PAGE_SHIFT)
+ & (PTRS_PER_PTE - 1)];
+ printk("*pte = %0*Lx ", sizeof(page)*2, (u64)page);
+ }
+
+ printk("\n");
+#else /* CONFIG_X86_64 */
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *pte;
+
+ pgd = (pgd_t *)read_cr3();
+
+ pgd = __va((unsigned long)pgd & PHYSICAL_PAGE_MASK);
+ pgd += pgd_index(address);
+ if (bad_address(pgd)) goto bad;
+ printk("PGD %lx ", pgd_val(*pgd));
+ if (!pgd_present(*pgd)) goto ret;
+
+ pud = pud_offset(pgd, address);
+ if (bad_address(pud)) goto bad;
+ printk("PUD %lx ", pud_val(*pud));
+ if (!pud_present(*pud)) goto ret;
+
+ pmd = pmd_offset(pud, address);
+ if (bad_address(pmd)) goto bad;
+ printk("PMD %lx ", pmd_val(*pmd));
+ if (!pmd_present(*pmd) || pmd_large(*pmd)) goto ret;
+
+ pte = pte_offset_kernel(pmd, address);
+ if (bad_address(pte)) goto bad;
+ printk("PTE %lx", pte_val(*pte));
+ret:
+ printk("\n");
+ return;
+bad:
+ printk("BAD\n");
+#endif
+}
+
+#ifdef CONFIG_X86_32
+static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address)
+{
+ unsigned index = pgd_index(address);
+ pgd_t *pgd_k;
+ pud_t *pud, *pud_k;
+ pmd_t *pmd, *pmd_k;
+
+ pgd += index;
+ pgd_k = init_mm.pgd + index;
+
+ if (!pgd_present(*pgd_k))
+ return NULL;
+
+ /*
+ * set_pgd(pgd, *pgd_k); here would be useless on PAE
+ * and redundant with the set_pmd() on non-PAE. As would
+ * set_pud.
+ */
+
+ pud = pud_offset(pgd, address);
+ pud_k = pud_offset(pgd_k, address);
+ if (!pud_present(*pud_k))
+ return NULL;
+
+ pmd = pmd_offset(pud, address);
+ pmd_k = pmd_offset(pud_k, address);
+ if (!pmd_present(*pmd_k))
+ return NULL;
+ if (!pmd_present(*pmd)) {
+ set_pmd(pmd, *pmd_k);
+ arch_flush_lazy_mmu_mode();
+ } else
+ BUG_ON(pmd_page(*pmd) != pmd_page(*pmd_k));
+ return pmd_k;
+}
+#endif
+
+#ifdef CONFIG_X86_64
+static const char errata93_warning[] =
+KERN_ERR "******* Your BIOS seems to not contain a fix for K8 errata #93\n"
+KERN_ERR "******* Working around it, but it may cause SEGVs or burn power.\n"
+KERN_ERR "******* Please consider a BIOS update.\n"
+KERN_ERR "******* Disabling USB legacy in the BIOS may also help.\n";
+#endif
+
+/* Workaround for K8 erratum #93 & buggy BIOS.
+ BIOS SMM functions are required to use a specific workaround
+ to avoid corruption of the 64bit RIP register on C stepping K8.
+ A lot of BIOS that didn't get tested properly miss this.
+ The OS sees this as a page fault with the upper 32bits of RIP cleared.
+ Try to work around it here.
+ Note we only handle faults in kernel here.
+ Does nothing for X86_32
+ */
+static int is_errata93(struct pt_regs *regs, unsigned long address)
+{
+#ifdef CONFIG_X86_64
+ static int warned;
+ if (address != regs->ip)
+ return 0;
+ if ((address >> 32) != 0)
+ return 0;
+ address |= 0xffffffffUL << 32;
+ if ((address >= (u64)_stext && address <= (u64)_etext) ||
+ (address >= MODULES_VADDR && address <= MODULES_END)) {
+ if (!warned) {
+ printk(errata93_warning);
+ warned = 1;
+ }
+ regs->ip = address;
+ return 1;
+ }
+#endif
+ return 0;
+}
+
+/*
+ * Work around K8 erratum #100 K8 in compat mode occasionally jumps to illegal
+ * addresses >4GB. We catch this in the page fault handler because these
+ * addresses are not reachable. Just detect this case and return. Any code
+ * segment in LDT is compatibility mode.
+ */
+static int is_errata100(struct pt_regs *regs, unsigned long address)
+{
+#ifdef CONFIG_X86_64
+ if ((regs->cs == __USER32_CS || (regs->cs & (1<<2))) &&
+ (address >> 32))
+ return 1;
+#endif
+ return 0;
+}
+
+void do_invalid_op(struct pt_regs *, unsigned long);
+
+static int is_f00f_bug(struct pt_regs *regs, unsigned long address)
+{
+#ifdef CONFIG_X86_F00F_BUG
+ unsigned long nr;
+ /*
+ * Pentium F0 0F C7 C8 bug workaround.
+ */
+ if (boot_cpu_data.f00f_bug) {
+ nr = (address - idt_descr.address) >> 3;
+
+ if (nr == 6) {
+ do_invalid_op(regs, 0);
+ return 1;
+ }
+ }
+#endif
+ return 0;
+}
+
+static void show_fault_oops(struct pt_regs *regs, unsigned long error_code,
+ unsigned long address)
+{
+#ifdef CONFIG_X86_32
+ if (!oops_may_print())
+ return;
+
+#ifdef CONFIG_X86_PAE
+ if (error_code & PF_INSTR) {
+ int level;
+ pte_t *pte = lookup_address(address, &level);
+
+ if (pte && pte_present(*pte) && !pte_exec(*pte))
+ printk(KERN_CRIT "kernel tried to execute "
+ "NX-protected page - exploit attempt? "
+ "(uid: %d)\n", current->uid);
+ }
+#endif
+ printk(KERN_ALERT "BUG: unable to handle kernel ");
+ if (address < PAGE_SIZE)
+ printk(KERN_CONT "NULL pointer dereference");
+ else
+ printk(KERN_CONT "paging request");
+ printk(KERN_CONT " at %08lx\n", address);
+
+ printk(KERN_ALERT "IP:");
+ printk_address(regs->ip, 1);
+ dump_pagetable(address);
+#else /* CONFIG_X86_64 */
+ printk(KERN_ALERT "BUG: unable to handle kernel ");
+ if (address < PAGE_SIZE)
+ printk(KERN_CONT "NULL pointer dereference");
+ else
+ printk(KERN_CONT "paging request");
+ printk(KERN_CONT " at %016lx\n", address);
+
+ printk(KERN_ALERT "IP:");
+ printk_address(regs->ip, 1);
+ dump_pagetable(address);
+#endif
+}
+
+#ifdef CONFIG_X86_64
+static noinline void pgtable_bad(unsigned long address, struct pt_regs *regs,
+ unsigned long error_code)
+{
+ unsigned long flags = oops_begin();
+ struct task_struct *tsk;
+
+ printk(KERN_ALERT "%s: Corrupted page table at address %lx\n",
+ current->comm, address);
+ dump_pagetable(address);
+ tsk = current;
+ tsk->thread.cr2 = address;
+ tsk->thread.trap_no = 14;
+ tsk->thread.error_code = error_code;
+ if (__die("Bad pagetable", regs, error_code))
+ regs = NULL;
+ oops_end(flags, regs, SIGKILL);
+}
+#endif
+
+/*
+ * X86_32
+ * Handle a fault on the vmalloc or module mapping area
+ *
+ * X86_64
+ * Handle a fault on the vmalloc area
+ *
+ * This assumes no large pages in there.
+ */
+static int vmalloc_fault(unsigned long address)
+{
+#ifdef CONFIG_X86_32
+ unsigned long pgd_paddr;
+ pmd_t *pmd_k;
+ pte_t *pte_k;
+ /*
+ * Synchronize this task's top level page-table
+ * with the 'reference' page table.
+ *
+ * Do _not_ use "current" here. We might be inside
+ * an interrupt in the middle of a task switch..
+ */
+ pgd_paddr = read_cr3();
+ pmd_k = vmalloc_sync_one(__va(pgd_paddr), address);
+ if (!pmd_k)
+ return -1;
+ pte_k = pte_offset_kernel(pmd_k, address);
+ if (!pte_present(*pte_k))
+ return -1;
+ return 0;
+#else
+ pgd_t *pgd, *pgd_ref;
+ pud_t *pud, *pud_ref;
+ pmd_t *pmd, *pmd_ref;
+ pte_t *pte, *pte_ref;
+
+ /* Copy kernel mappings over when needed. This can also
+ happen within a race in page table update. In the later
+ case just flush. */
+
+ pgd = pgd_offset(current->mm ?: &init_mm, address);
+ pgd_ref = pgd_offset_k(address);
+ if (pgd_none(*pgd_ref))
+ return -1;
+ if (pgd_none(*pgd))
+ set_pgd(pgd, *pgd_ref);
+ else
+ BUG_ON(pgd_page_vaddr(*pgd) != pgd_page_vaddr(*pgd_ref));
+
+ /* Below here mismatches are bugs because these lower tables
+ are shared */
+
+ pud = pud_offset(pgd, address);
+ pud_ref = pud_offset(pgd_ref, address);
+ if (pud_none(*pud_ref))
+ return -1;
+ if (pud_none(*pud) || pud_page_vaddr(*pud) != pud_page_vaddr(*pud_ref))
+ BUG();
+ pmd = pmd_offset(pud, address);
+ pmd_ref = pmd_offset(pud_ref, address);
+ if (pmd_none(*pmd_ref))
+ return -1;
+ if (pmd_none(*pmd) || pmd_page(*pmd) != pmd_page(*pmd_ref))
+ BUG();
+ pte_ref = pte_offset_kernel(pmd_ref, address);
+ if (!pte_present(*pte_ref))
+ return -1;
+ pte = pte_offset_kernel(pmd, address);
+ /* Don't use pte_page here, because the mappings can point
+ outside mem_map, and the NUMA hash lookup cannot handle
+ that. */
+ if (!pte_present(*pte) || pte_pfn(*pte) != pte_pfn(*pte_ref))
+ BUG();
+ return 0;
+#endif
+}
+
+int show_unhandled_signals = 1;
+
+/*
+ * This routine handles page faults. It determines the address,
+ * and the problem, and then passes it off to one of the appropriate
+ * routines.
+ */
+#ifdef CONFIG_X86_64
+asmlinkage
+#endif
+void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
+{
+ struct task_struct *tsk;
+ struct mm_struct *mm;
+ struct vm_area_struct *vma;
+ unsigned long address;
+ int write, si_code;
+ int fault;
+#ifdef CONFIG_X86_64
+ unsigned long flags;
+#endif
+
+ /*
+ * We can fault from pretty much anywhere, with unknown IRQ state.
+ */
+ trace_hardirqs_fixup();
+
+ tsk = current;
+ mm = tsk->mm;
+ prefetchw(&mm->mmap_sem);
+
+ /* get the address */
+ address = read_cr2();
+
+ si_code = SEGV_MAPERR;
+
+ if (notify_page_fault(regs))
+ return;
+
+ /*
+ * We fault-in kernel-space virtual memory on-demand. The
+ * 'reference' page table is init_mm.pgd.
+ *
+ * NOTE! We MUST NOT take any locks for this case. We may
+ * be in an interrupt or a critical region, and should
+ * only copy the information from the master page table,
+ * nothing more.
+ *
+ * This verifies that the fault happens in kernel space
+ * (error_code & 4) == 0, and that the fault was not a
+ * protection error (error_code & 9) == 0.
+ */
+#ifdef CONFIG_X86_32
+ if (unlikely(address >= TASK_SIZE)) {
+ if (!(error_code & (PF_RSVD|PF_USER|PF_PROT)) &&
+ vmalloc_fault(address) >= 0)
+ return;
+ /*
+ * Don't take the mm semaphore here. If we fixup a prefetch
+ * fault we could otherwise deadlock.
+ */
+ goto bad_area_nosemaphore;
+ }
+
+ /* It's safe to allow irq's after cr2 has been saved and the vmalloc
+ fault has been handled. */
+ if (regs->flags & (X86_EFLAGS_IF|VM_MASK))
+ local_irq_enable();
+
+ /*
+ * If we're in an interrupt, have no user context or are running in an
+ * atomic region then we must not take the fault.
+ */
+ if (in_atomic() || !mm)
+ goto bad_area_nosemaphore;
+#else /* CONFIG_X86_64 */
+ if (unlikely(address >= TASK_SIZE64)) {
+ /*
+ * Don't check for the module range here: its PML4
+ * is always initialized because it's shared with the main
+ * kernel text. Only vmalloc may need PML4 syncups.
+ */
+ if (!(error_code & (PF_RSVD|PF_USER|PF_PROT)) &&
+ ((address >= VMALLOC_START && address < VMALLOC_END))) {
+ if (vmalloc_fault(address) >= 0)
+ return;
+ }
+ /*
+ * Don't take the mm semaphore here. If we fixup a prefetch
+ * fault we could otherwise deadlock.
+ */
+ goto bad_area_nosemaphore;
+ }
+ if (likely(regs->flags & X86_EFLAGS_IF))
+ local_irq_enable();
+
+ if (unlikely(error_code & PF_RSVD))
+ pgtable_bad(address, regs, error_code);
+
+ /*
+ * If we're in an interrupt, have no user context or are running in an
+ * atomic region then we must not take the fault.
+ */
+ if (unlikely(in_atomic() || !mm))
+ goto bad_area_nosemaphore;
+
+ /*
+ * User-mode registers count as a user access even for any
+ * potential system fault or CPU buglet.
+ */
+ if (user_mode_vm(regs))
+ error_code |= PF_USER;
+again:
+#endif
+ /* When running in the kernel we expect faults to occur only to
+ * addresses in user space. All other faults represent errors in the
+ * kernel and should generate an OOPS. Unfortunately, in the case of an
+ * erroneous fault occurring in a code path which already holds mmap_sem
+ * we will deadlock attempting to validate the fault against the
+ * address space. Luckily the kernel only validly references user
+ * space from well defined areas of code, which are listed in the
+ * exceptions table.
+ *
+ * As the vast majority of faults will be valid we will only perform
+ * the source reference check when there is a possibility of a deadlock.
+ * Attempt to lock the address space, if we cannot we then validate the
+ * source. If this is invalid we can skip the address space check,
+ * thus avoiding the deadlock.
+ */
+ if (!down_read_trylock(&mm->mmap_sem)) {
+ if ((error_code & PF_USER) == 0 &&
+ !search_exception_tables(regs->ip))
+ goto bad_area_nosemaphore;
+ down_read(&mm->mmap_sem);
+ }
+
+ vma = find_vma(mm, address);
+ if (!vma)
+ goto bad_area;
+#ifdef CONFIG_X86_32
+ if (vma->vm_start <= address)
+#else
+ if (likely(vma->vm_start <= address))
+#endif
+ goto good_area;
+ if (!(vma->vm_flags & VM_GROWSDOWN))
+ goto bad_area;
+ if (error_code & PF_USER) {
+ /*
+ * Accessing the stack below %sp is always a bug.
+ * The large cushion allows instructions like enter
+ * and pusha to work. ("enter $65535,$31" pushes
+ * 32 pointers and then decrements %sp by 65535.)
+ */
+ if (address + 65536 + 32 * sizeof(unsigned long) < regs->sp)
+ goto bad_area;
+ }
+ if (expand_stack(vma, address))
+ goto bad_area;
+/*
+ * Ok, we have a good vm_area for this memory access, so
+ * we can handle it..
+ */
+good_area:
+ si_code = SEGV_ACCERR;
+ write = 0;
+ switch (error_code & (PF_PROT|PF_WRITE)) {
+ default: /* 3: write, present */
+ /* fall through */
+ case PF_WRITE: /* write, not present */
+ if (!(vma->vm_flags & VM_WRITE))
+ goto bad_area;
+ write++;
+ break;
+ case PF_PROT: /* read, present */
+ goto bad_area;
+ case 0: /* read, not present */
+ if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE)))
+ goto bad_area;
+ }
+
+#ifdef CONFIG_X86_32
+survive:
+#endif
+ /*
+ * If for any reason at all we couldn't handle the fault,
+ * make sure we exit gracefully rather than endlessly redo
+ * the fault.
+ */
+ fault = handle_mm_fault(mm, vma, address, write);
+ if (unlikely(fault & VM_FAULT_ERROR)) {
+ if (fault & VM_FAULT_OOM)
+ goto out_of_memory;
+ else if (fault & VM_FAULT_SIGBUS)
+ goto do_sigbus;
+ BUG();
+ }
+ if (fault & VM_FAULT_MAJOR)
+ tsk->maj_flt++;
+ else
+ tsk->min_flt++;
+
+#ifdef CONFIG_X86_32
+ /*
+ * Did it hit the DOS screen memory VA from vm86 mode?
+ */
+ if (v8086_mode(regs)) {
+ unsigned long bit = (address - 0xA0000) >> PAGE_SHIFT;
+ if (bit < 32)
+ tsk->thread.screen_bitmap |= 1 << bit;
+ }
+#endif
+ up_read(&mm->mmap_sem);
+ return;
+
+/*
+ * Something tried to access memory that isn't in our memory map..
+ * Fix it, but check if it's kernel or user first..
+ */
+bad_area:
+ up_read(&mm->mmap_sem);
+
+bad_area_nosemaphore:
+ /* User mode accesses just cause a SIGSEGV */
+ if (error_code & PF_USER) {
+ /*
+ * It's possible to have interrupts off here.
+ */
+ local_irq_enable();
+
+ /*
+ * Valid to do another page fault here because this one came
+ * from user space.
+ */
+ if (is_prefetch(regs, address, error_code))
+ return;
+
+ if (is_errata100(regs, address))
+ return;
+
+ if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) &&
+ printk_ratelimit()) {
+ printk(
+#ifdef CONFIG_X86_32
+ "%s%s[%d]: segfault at %lx ip %08lx sp %08lx error %lx",
+#else
+ "%s%s[%d]: segfault at %lx ip %lx sp %lx error %lx",
+#endif
+ task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
+ tsk->comm, task_pid_nr(tsk), address, regs->ip,
+ regs->sp, error_code);
+ print_vma_addr(" in ", regs->ip);
+ printk("\n");
+ }
+
+ tsk->thread.cr2 = address;
+ /* Kernel addresses are always protection faults */
+ tsk->thread.error_code = error_code | (address >= TASK_SIZE);
+ tsk->thread.trap_no = 14;
+ force_sig_info_fault(SIGSEGV, si_code, address, tsk);
+ return;
+ }
+
+ if (is_f00f_bug(regs, address))
+ return;
+
+no_context:
+ /* Are we prepared to handle this kernel fault? */
+ if (fixup_exception(regs))
+ return;
+
+ /*
+ * X86_32
+ * Valid to do another page fault here, because if this fault
+ * had been triggered by is_prefetch fixup_exception would have
+ * handled it.
+ *
+ * X86_64
+ * Hall of shame of CPU/BIOS bugs.
+ */
+ if (is_prefetch(regs, address, error_code))
+ return;
+
+ if (is_errata93(regs, address))
+ return;
+
+/*
+ * Oops. The kernel tried to access some bad page. We'll have to
+ * terminate things with extreme prejudice.
+ */
+#ifdef CONFIG_X86_32
+ bust_spinlocks(1);
+
+ show_fault_oops(regs, error_code, address);
+
+ tsk->thread.cr2 = address;
+ tsk->thread.trap_no = 14;
+ tsk->thread.error_code = error_code;
+ die("Oops", regs, error_code);
+ bust_spinlocks(0);
+ do_exit(SIGKILL);
+#else /* CONFIG_X86_64 */
+ flags = oops_begin();
+
+ show_fault_oops(regs, error_code, address);
+
+ tsk->thread.cr2 = address;
+ tsk->thread.trap_no = 14;
+ tsk->thread.error_code = error_code;
+ if (__die("Oops", regs, error_code))
+ regs = NULL;
+ /* Executive summary in case the body of the oops scrolled away */
+ printk(KERN_EMERG "CR2: %016lx\n", address);
+ oops_end(flags, regs, SIGKILL);
+#endif
+
+/*
+ * We ran out of memory, or some other thing happened to us that made
+ * us unable to handle the page fault gracefully.
+ */
+out_of_memory:
+ up_read(&mm->mmap_sem);
+#ifdef CONFIG_X86_32
+ if (is_global_init(tsk)) {
+ yield();
+ down_read(&mm->mmap_sem);
+ goto survive;
+ }
+#else
+ if (is_global_init(current)) {
+ yield();
+ goto again;
+ }
+#endif
+ printk("VM: killing process %s\n", tsk->comm);
+ if (error_code & PF_USER)
+ do_group_exit(SIGKILL);
+ goto no_context;
+
+do_sigbus:
+ up_read(&mm->mmap_sem);
+
+ /* Kernel mode? Handle exceptions or die */
+ if (!(error_code & PF_USER))
+ goto no_context;
+#ifdef CONFIG_X86_32
+ /* User space => ok to do another page fault */
+ if (is_prefetch(regs, address, error_code))
+ return;
+#endif
+ tsk->thread.cr2 = address;
+ tsk->thread.error_code = error_code;
+ tsk->thread.trap_no = 14;
+ force_sig_info_fault(SIGBUS, BUS_ADRERR, address, tsk);
+}
+
+#ifdef CONFIG_X86_64
+DEFINE_SPINLOCK(pgd_lock);
+LIST_HEAD(pgd_list);
+#endif
+
+void vmalloc_sync_all(void)
+{
+#ifdef CONFIG_X86_32
+ /*
+ * Note that races in the updates of insync and start aren't
+ * problematic: insync can only get set bits added, and updates to
+ * start are only improving performance (without affecting correctness
+ * if undone).
+ */
+ static DECLARE_BITMAP(insync, PTRS_PER_PGD);
+ static unsigned long start = TASK_SIZE;
+ unsigned long address;
+
+ if (SHARED_KERNEL_PMD)
+ return;
+
+ BUILD_BUG_ON(TASK_SIZE & ~PGDIR_MASK);
+ for (address = start; address >= TASK_SIZE; address += PGDIR_SIZE) {
+ if (!test_bit(pgd_index(address), insync)) {
+ unsigned long flags;
+ struct page *page;
+
+ spin_lock_irqsave(&pgd_lock, flags);
+ for (page = pgd_list; page; page =
+ (struct page *)page->index)
+ if (!vmalloc_sync_one(page_address(page),
+ address)) {
+ BUG_ON(page != pgd_list);
+ break;
+ }
+ spin_unlock_irqrestore(&pgd_lock, flags);
+ if (!page)
+ set_bit(pgd_index(address), insync);
+ }
+ if (address == start && test_bit(pgd_index(address), insync))
+ start = address + PGDIR_SIZE;
+ }
+#else /* CONFIG_X86_64 */
+ /*
+ * Note that races in the updates of insync and start aren't
+ * problematic: insync can only get set bits added, and updates to
+ * start are only improving performance (without affecting correctness
+ * if undone).
+ */
+ static DECLARE_BITMAP(insync, PTRS_PER_PGD);
+ static unsigned long start = VMALLOC_START & PGDIR_MASK;
+ unsigned long address;
+
+ for (address = start; address <= VMALLOC_END; address += PGDIR_SIZE) {
+ if (!test_bit(pgd_index(address), insync)) {
+ const pgd_t *pgd_ref = pgd_offset_k(address);
+ struct page *page;
+
+ if (pgd_none(*pgd_ref))
+ continue;
+ spin_lock(&pgd_lock);
+ list_for_each_entry(page, &pgd_list, lru) {
+ pgd_t *pgd;
+ pgd = (pgd_t *)page_address(page) + pgd_index(address);
+ if (pgd_none(*pgd))
+ set_pgd(pgd, *pgd_ref);
+ else
+ BUG_ON(pgd_page_vaddr(*pgd) != pgd_page_vaddr(*pgd_ref));
+ }
+ spin_unlock(&pgd_lock);
+ set_bit(pgd_index(address), insync);
+ }
+ if (address == start)
+ start = address + PGDIR_SIZE;
+ }
+ /* Check that there is no need to do the same for the modules area. */
+ BUILD_BUG_ON(!(MODULES_VADDR > __START_KERNEL));
+ BUILD_BUG_ON(!(((MODULES_END - 1) & PGDIR_MASK) ==
+ (__START_KERNEL & PGDIR_MASK)));
+#endif
+}
+++ /dev/null
-/*
- * Copyright (C) 1995 Linus Torvalds
- */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-#include <linux/vt_kern.h> /* For unblank_screen() */
-#include <linux/highmem.h>
-#include <linux/bootmem.h> /* for max_low_pfn */
-#include <linux/vmalloc.h>
-#include <linux/module.h>
-#include <linux/kprobes.h>
-#include <linux/uaccess.h>
-#include <linux/kdebug.h>
-
-#include <asm/system.h>
-#include <asm/desc.h>
-#include <asm/segment.h>
-
-/*
- * Page fault error code bits
- * bit 0 == 0 means no page found, 1 means protection fault
- * bit 1 == 0 means read, 1 means write
- * bit 2 == 0 means kernel, 1 means user-mode
- * bit 3 == 1 means use of reserved bit detected
- * bit 4 == 1 means fault was an instruction fetch
- */
-#define PF_PROT (1<<0)
-#define PF_WRITE (1<<1)
-#define PF_USER (1<<2)
-#define PF_RSVD (1<<3)
-#define PF_INSTR (1<<4)
-
-static inline int notify_page_fault(struct pt_regs *regs)
-{
-#ifdef CONFIG_KPROBES
- int ret = 0;
-
- /* kprobe_running() needs smp_processor_id() */
-#ifdef CONFIG_X86_32
- if (!user_mode_vm(regs)) {
-#else
- if (!user_mode(regs)) {
-#endif
- preempt_disable();
- if (kprobe_running() && kprobe_fault_handler(regs, 14))
- ret = 1;
- preempt_enable();
- }
-
- return ret;
-#else
- return 0;
-#endif
-}
-
-/*
- * X86_32
- * Sometimes AMD Athlon/Opteron CPUs report invalid exceptions on prefetch.
- * Check that here and ignore it.
- *
- * X86_64
- * Sometimes the CPU reports invalid exceptions on prefetch.
- * Check that here and ignore it.
- *
- * Opcode checker based on code by Richard Brunner
- */
-static int is_prefetch(struct pt_regs *regs, unsigned long addr,
- unsigned long error_code)
-{
- unsigned char *instr;
- int scan_more = 1;
- int prefetch = 0;
- unsigned char *max_instr;
-
-#ifdef CONFIG_X86_32
- if (unlikely(boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
- boot_cpu_data.x86 >= 6)) {
- /* Catch an obscure case of prefetch inside an NX page. */
- if (nx_enabled && (error_code & PF_INSTR))
- return 0;
- } else {
- return 0;
- }
-#else
- /* If it was a exec fault ignore */
- if (error_code & PF_INSTR)
- return 0;
-#endif
-
- instr = (unsigned char *)convert_ip_to_linear(current, regs);
- max_instr = instr + 15;
-
- if (user_mode(regs) && instr >= (unsigned char *)TASK_SIZE)
- return 0;
-
- while (scan_more && instr < max_instr) {
- unsigned char opcode;
- unsigned char instr_hi;
- unsigned char instr_lo;
-
- if (probe_kernel_address(instr, opcode))
- break;
-
- instr_hi = opcode & 0xf0;
- instr_lo = opcode & 0x0f;
- instr++;
-
- switch (instr_hi) {
- case 0x20:
- case 0x30:
- /*
- * Values 0x26,0x2E,0x36,0x3E are valid x86 prefixes.
- * In X86_64 long mode, the CPU will signal invalid
- * opcode if some of these prefixes are present so
- * X86_64 will never get here anyway
- */
- scan_more = ((instr_lo & 7) == 0x6);
- break;
-#ifdef CONFIG_X86_64
- case 0x40:
- /*
- * In AMD64 long mode 0x40..0x4F are valid REX prefixes
- * Need to figure out under what instruction mode the
- * instruction was issued. Could check the LDT for lm,
- * but for now it's good enough to assume that long
- * mode only uses well known segments or kernel.
- */
- scan_more = (!user_mode(regs)) || (regs->cs == __USER_CS);
- break;
-#endif
- case 0x60:
- /* 0x64 thru 0x67 are valid prefixes in all modes. */
- scan_more = (instr_lo & 0xC) == 0x4;
- break;
- case 0xF0:
- /* 0xF0, 0xF2, 0xF3 are valid prefixes in all modes. */
- scan_more = !instr_lo || (instr_lo>>1) == 1;
- break;
- case 0x00:
- /* Prefetch instruction is 0x0F0D or 0x0F18 */
- scan_more = 0;
-
- if (probe_kernel_address(instr, opcode))
- break;
- prefetch = (instr_lo == 0xF) &&
- (opcode == 0x0D || opcode == 0x18);
- break;
- default:
- scan_more = 0;
- break;
- }
- }
- return prefetch;
-}
-
-static void force_sig_info_fault(int si_signo, int si_code,
- unsigned long address, struct task_struct *tsk)
-{
- siginfo_t info;
-
- info.si_signo = si_signo;
- info.si_errno = 0;
- info.si_code = si_code;
- info.si_addr = (void __user *)address;
- force_sig_info(si_signo, &info, tsk);
-}
-
-#ifdef CONFIG_X86_64
-static int bad_address(void *p)
-{
- unsigned long dummy;
- return probe_kernel_address((unsigned long *)p, dummy);
-}
-#endif
-
-void dump_pagetable(unsigned long address)
-{
-#ifdef CONFIG_X86_32
- __typeof__(pte_val(__pte(0))) page;
-
- page = read_cr3();
- page = ((__typeof__(page) *) __va(page))[address >> PGDIR_SHIFT];
-#ifdef CONFIG_X86_PAE
- printk("*pdpt = %016Lx ", page);
- if ((page >> PAGE_SHIFT) < max_low_pfn
- && page & _PAGE_PRESENT) {
- page &= PAGE_MASK;
- page = ((__typeof__(page) *) __va(page))[(address >> PMD_SHIFT)
- & (PTRS_PER_PMD - 1)];
- printk(KERN_CONT "*pde = %016Lx ", page);
- page &= ~_PAGE_NX;
- }
-#else
- printk("*pde = %08lx ", page);
-#endif
-
- /*
- * We must not directly access the pte in the highpte
- * case if the page table is located in highmem.
- * And let's rather not kmap-atomic the pte, just in case
- * it's allocated already.
- */
- if ((page >> PAGE_SHIFT) < max_low_pfn
- && (page & _PAGE_PRESENT)
- && !(page & _PAGE_PSE)) {
- page &= PAGE_MASK;
- page = ((__typeof__(page) *) __va(page))[(address >> PAGE_SHIFT)
- & (PTRS_PER_PTE - 1)];
- printk("*pte = %0*Lx ", sizeof(page)*2, (u64)page);
- }
-
- printk("\n");
-#else /* CONFIG_X86_64 */
- pgd_t *pgd;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *pte;
-
- pgd = (pgd_t *)read_cr3();
-
- pgd = __va((unsigned long)pgd & PHYSICAL_PAGE_MASK);
- pgd += pgd_index(address);
- if (bad_address(pgd)) goto bad;
- printk("PGD %lx ", pgd_val(*pgd));
- if (!pgd_present(*pgd)) goto ret;
-
- pud = pud_offset(pgd, address);
- if (bad_address(pud)) goto bad;
- printk("PUD %lx ", pud_val(*pud));
- if (!pud_present(*pud)) goto ret;
-
- pmd = pmd_offset(pud, address);
- if (bad_address(pmd)) goto bad;
- printk("PMD %lx ", pmd_val(*pmd));
- if (!pmd_present(*pmd) || pmd_large(*pmd)) goto ret;
-
- pte = pte_offset_kernel(pmd, address);
- if (bad_address(pte)) goto bad;
- printk("PTE %lx", pte_val(*pte));
-ret:
- printk("\n");
- return;
-bad:
- printk("BAD\n");
-#endif
-}
-
-#ifdef CONFIG_X86_32
-static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address)
-{
- unsigned index = pgd_index(address);
- pgd_t *pgd_k;
- pud_t *pud, *pud_k;
- pmd_t *pmd, *pmd_k;
-
- pgd += index;
- pgd_k = init_mm.pgd + index;
-
- if (!pgd_present(*pgd_k))
- return NULL;
-
- /*
- * set_pgd(pgd, *pgd_k); here would be useless on PAE
- * and redundant with the set_pmd() on non-PAE. As would
- * set_pud.
- */
-
- pud = pud_offset(pgd, address);
- pud_k = pud_offset(pgd_k, address);
- if (!pud_present(*pud_k))
- return NULL;
-
- pmd = pmd_offset(pud, address);
- pmd_k = pmd_offset(pud_k, address);
- if (!pmd_present(*pmd_k))
- return NULL;
- if (!pmd_present(*pmd)) {
- set_pmd(pmd, *pmd_k);
- arch_flush_lazy_mmu_mode();
- } else
- BUG_ON(pmd_page(*pmd) != pmd_page(*pmd_k));
- return pmd_k;
-}
-#endif
-
-#ifdef CONFIG_X86_64
-static const char errata93_warning[] =
-KERN_ERR "******* Your BIOS seems to not contain a fix for K8 errata #93\n"
-KERN_ERR "******* Working around it, but it may cause SEGVs or burn power.\n"
-KERN_ERR "******* Please consider a BIOS update.\n"
-KERN_ERR "******* Disabling USB legacy in the BIOS may also help.\n";
-#endif
-
-/* Workaround for K8 erratum #93 & buggy BIOS.
- BIOS SMM functions are required to use a specific workaround
- to avoid corruption of the 64bit RIP register on C stepping K8.
- A lot of BIOS that didn't get tested properly miss this.
- The OS sees this as a page fault with the upper 32bits of RIP cleared.
- Try to work around it here.
- Note we only handle faults in kernel here.
- Does nothing for X86_32
- */
-static int is_errata93(struct pt_regs *regs, unsigned long address)
-{
-#ifdef CONFIG_X86_64
- static int warned;
- if (address != regs->ip)
- return 0;
- if ((address >> 32) != 0)
- return 0;
- address |= 0xffffffffUL << 32;
- if ((address >= (u64)_stext && address <= (u64)_etext) ||
- (address >= MODULES_VADDR && address <= MODULES_END)) {
- if (!warned) {
- printk(errata93_warning);
- warned = 1;
- }
- regs->ip = address;
- return 1;
- }
-#endif
- return 0;
-}
-
-/*
- * Work around K8 erratum #100 K8 in compat mode occasionally jumps to illegal
- * addresses >4GB. We catch this in the page fault handler because these
- * addresses are not reachable. Just detect this case and return. Any code
- * segment in LDT is compatibility mode.
- */
-static int is_errata100(struct pt_regs *regs, unsigned long address)
-{
-#ifdef CONFIG_X86_64
- if ((regs->cs == __USER32_CS || (regs->cs & (1<<2))) &&
- (address >> 32))
- return 1;
-#endif
- return 0;
-}
-
-void do_invalid_op(struct pt_regs *, unsigned long);
-
-static int is_f00f_bug(struct pt_regs *regs, unsigned long address)
-{
-#ifdef CONFIG_X86_F00F_BUG
- unsigned long nr;
- /*
- * Pentium F0 0F C7 C8 bug workaround.
- */
- if (boot_cpu_data.f00f_bug) {
- nr = (address - idt_descr.address) >> 3;
-
- if (nr == 6) {
- do_invalid_op(regs, 0);
- return 1;
- }
- }
-#endif
- return 0;
-}
-
-static void show_fault_oops(struct pt_regs *regs, unsigned long error_code,
- unsigned long address)
-{
-#ifdef CONFIG_X86_32
- if (!oops_may_print())
- return;
-
-#ifdef CONFIG_X86_PAE
- if (error_code & PF_INSTR) {
- int level;
- pte_t *pte = lookup_address(address, &level);
-
- if (pte && pte_present(*pte) && !pte_exec(*pte))
- printk(KERN_CRIT "kernel tried to execute "
- "NX-protected page - exploit attempt? "
- "(uid: %d)\n", current->uid);
- }
-#endif
- printk(KERN_ALERT "BUG: unable to handle kernel ");
- if (address < PAGE_SIZE)
- printk(KERN_CONT "NULL pointer dereference");
- else
- printk(KERN_CONT "paging request");
- printk(KERN_CONT " at %08lx\n", address);
-
- printk(KERN_ALERT "IP:");
- printk_address(regs->ip, 1);
- dump_pagetable(address);
-#else /* CONFIG_X86_64 */
- printk(KERN_ALERT "BUG: unable to handle kernel ");
- if (address < PAGE_SIZE)
- printk(KERN_CONT "NULL pointer dereference");
- else
- printk(KERN_CONT "paging request");
- printk(KERN_CONT " at %016lx\n", address);
-
- printk(KERN_ALERT "IP:");
- printk_address(regs->ip, 1);
- dump_pagetable(address);
-#endif
-}
-
-#ifdef CONFIG_X86_64
-static noinline void pgtable_bad(unsigned long address, struct pt_regs *regs,
- unsigned long error_code)
-{
- unsigned long flags = oops_begin();
- struct task_struct *tsk;
-
- printk(KERN_ALERT "%s: Corrupted page table at address %lx\n",
- current->comm, address);
- dump_pagetable(address);
- tsk = current;
- tsk->thread.cr2 = address;
- tsk->thread.trap_no = 14;
- tsk->thread.error_code = error_code;
- if (__die("Bad pagetable", regs, error_code))
- regs = NULL;
- oops_end(flags, regs, SIGKILL);
-}
-#endif
-
-/*
- * X86_32
- * Handle a fault on the vmalloc or module mapping area
- *
- * X86_64
- * Handle a fault on the vmalloc area
- *
- * This assumes no large pages in there.
- */
-static int vmalloc_fault(unsigned long address)
-{
-#ifdef CONFIG_X86_32
- unsigned long pgd_paddr;
- pmd_t *pmd_k;
- pte_t *pte_k;
- /*
- * Synchronize this task's top level page-table
- * with the 'reference' page table.
- *
- * Do _not_ use "current" here. We might be inside
- * an interrupt in the middle of a task switch..
- */
- pgd_paddr = read_cr3();
- pmd_k = vmalloc_sync_one(__va(pgd_paddr), address);
- if (!pmd_k)
- return -1;
- pte_k = pte_offset_kernel(pmd_k, address);
- if (!pte_present(*pte_k))
- return -1;
- return 0;
-#else
- pgd_t *pgd, *pgd_ref;
- pud_t *pud, *pud_ref;
- pmd_t *pmd, *pmd_ref;
- pte_t *pte, *pte_ref;
-
- /* Copy kernel mappings over when needed. This can also
- happen within a race in page table update. In the later
- case just flush. */
-
- pgd = pgd_offset(current->mm ?: &init_mm, address);
- pgd_ref = pgd_offset_k(address);
- if (pgd_none(*pgd_ref))
- return -1;
- if (pgd_none(*pgd))
- set_pgd(pgd, *pgd_ref);
- else
- BUG_ON(pgd_page_vaddr(*pgd) != pgd_page_vaddr(*pgd_ref));
-
- /* Below here mismatches are bugs because these lower tables
- are shared */
-
- pud = pud_offset(pgd, address);
- pud_ref = pud_offset(pgd_ref, address);
- if (pud_none(*pud_ref))
- return -1;
- if (pud_none(*pud) || pud_page_vaddr(*pud) != pud_page_vaddr(*pud_ref))
- BUG();
- pmd = pmd_offset(pud, address);
- pmd_ref = pmd_offset(pud_ref, address);
- if (pmd_none(*pmd_ref))
- return -1;
- if (pmd_none(*pmd) || pmd_page(*pmd) != pmd_page(*pmd_ref))
- BUG();
- pte_ref = pte_offset_kernel(pmd_ref, address);
- if (!pte_present(*pte_ref))
- return -1;
- pte = pte_offset_kernel(pmd, address);
- /* Don't use pte_page here, because the mappings can point
- outside mem_map, and the NUMA hash lookup cannot handle
- that. */
- if (!pte_present(*pte) || pte_pfn(*pte) != pte_pfn(*pte_ref))
- BUG();
- return 0;
-#endif
-}
-
-int show_unhandled_signals = 1;
-
-/*
- * This routine handles page faults. It determines the address,
- * and the problem, and then passes it off to one of the appropriate
- * routines.
- */
-#ifdef CONFIG_X86_64
-asmlinkage
-#endif
-void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
-{
- struct task_struct *tsk;
- struct mm_struct *mm;
- struct vm_area_struct *vma;
- unsigned long address;
- int write, si_code;
- int fault;
-#ifdef CONFIG_X86_64
- unsigned long flags;
-#endif
-
- /*
- * We can fault from pretty much anywhere, with unknown IRQ state.
- */
- trace_hardirqs_fixup();
-
- tsk = current;
- mm = tsk->mm;
- prefetchw(&mm->mmap_sem);
-
- /* get the address */
- address = read_cr2();
-
- si_code = SEGV_MAPERR;
-
- if (notify_page_fault(regs))
- return;
-
- /*
- * We fault-in kernel-space virtual memory on-demand. The
- * 'reference' page table is init_mm.pgd.
- *
- * NOTE! We MUST NOT take any locks for this case. We may
- * be in an interrupt or a critical region, and should
- * only copy the information from the master page table,
- * nothing more.
- *
- * This verifies that the fault happens in kernel space
- * (error_code & 4) == 0, and that the fault was not a
- * protection error (error_code & 9) == 0.
- */
-#ifdef CONFIG_X86_32
- if (unlikely(address >= TASK_SIZE)) {
- if (!(error_code & (PF_RSVD|PF_USER|PF_PROT)) &&
- vmalloc_fault(address) >= 0)
- return;
- /*
- * Don't take the mm semaphore here. If we fixup a prefetch
- * fault we could otherwise deadlock.
- */
- goto bad_area_nosemaphore;
- }
-
- /* It's safe to allow irq's after cr2 has been saved and the vmalloc
- fault has been handled. */
- if (regs->flags & (X86_EFLAGS_IF|VM_MASK))
- local_irq_enable();
-
- /*
- * If we're in an interrupt, have no user context or are running in an
- * atomic region then we must not take the fault.
- */
- if (in_atomic() || !mm)
- goto bad_area_nosemaphore;
-#else /* CONFIG_X86_64 */
- if (unlikely(address >= TASK_SIZE64)) {
- /*
- * Don't check for the module range here: its PML4
- * is always initialized because it's shared with the main
- * kernel text. Only vmalloc may need PML4 syncups.
- */
- if (!(error_code & (PF_RSVD|PF_USER|PF_PROT)) &&
- ((address >= VMALLOC_START && address < VMALLOC_END))) {
- if (vmalloc_fault(address) >= 0)
- return;
- }
- /*
- * Don't take the mm semaphore here. If we fixup a prefetch
- * fault we could otherwise deadlock.
- */
- goto bad_area_nosemaphore;
- }
- if (likely(regs->flags & X86_EFLAGS_IF))
- local_irq_enable();
-
- if (unlikely(error_code & PF_RSVD))
- pgtable_bad(address, regs, error_code);
-
- /*
- * If we're in an interrupt, have no user context or are running in an
- * atomic region then we must not take the fault.
- */
- if (unlikely(in_atomic() || !mm))
- goto bad_area_nosemaphore;
-
- /*
- * User-mode registers count as a user access even for any
- * potential system fault or CPU buglet.
- */
- if (user_mode_vm(regs))
- error_code |= PF_USER;
-again:
-#endif
- /* When running in the kernel we expect faults to occur only to
- * addresses in user space. All other faults represent errors in the
- * kernel and should generate an OOPS. Unfortunately, in the case of an
- * erroneous fault occurring in a code path which already holds mmap_sem
- * we will deadlock attempting to validate the fault against the
- * address space. Luckily the kernel only validly references user
- * space from well defined areas of code, which are listed in the
- * exceptions table.
- *
- * As the vast majority of faults will be valid we will only perform
- * the source reference check when there is a possibility of a deadlock.
- * Attempt to lock the address space, if we cannot we then validate the
- * source. If this is invalid we can skip the address space check,
- * thus avoiding the deadlock.
- */
- if (!down_read_trylock(&mm->mmap_sem)) {
- if ((error_code & PF_USER) == 0 &&
- !search_exception_tables(regs->ip))
- goto bad_area_nosemaphore;
- down_read(&mm->mmap_sem);
- }
-
- vma = find_vma(mm, address);
- if (!vma)
- goto bad_area;
-#ifdef CONFIG_X86_32
- if (vma->vm_start <= address)
-#else
- if (likely(vma->vm_start <= address))
-#endif
- goto good_area;
- if (!(vma->vm_flags & VM_GROWSDOWN))
- goto bad_area;
- if (error_code & PF_USER) {
- /*
- * Accessing the stack below %sp is always a bug.
- * The large cushion allows instructions like enter
- * and pusha to work. ("enter $65535,$31" pushes
- * 32 pointers and then decrements %sp by 65535.)
- */
- if (address + 65536 + 32 * sizeof(unsigned long) < regs->sp)
- goto bad_area;
- }
- if (expand_stack(vma, address))
- goto bad_area;
-/*
- * Ok, we have a good vm_area for this memory access, so
- * we can handle it..
- */
-good_area:
- si_code = SEGV_ACCERR;
- write = 0;
- switch (error_code & (PF_PROT|PF_WRITE)) {
- default: /* 3: write, present */
- /* fall through */
- case PF_WRITE: /* write, not present */
- if (!(vma->vm_flags & VM_WRITE))
- goto bad_area;
- write++;
- break;
- case PF_PROT: /* read, present */
- goto bad_area;
- case 0: /* read, not present */
- if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE)))
- goto bad_area;
- }
-
-#ifdef CONFIG_X86_32
-survive:
-#endif
- /*
- * If for any reason at all we couldn't handle the fault,
- * make sure we exit gracefully rather than endlessly redo
- * the fault.
- */
- fault = handle_mm_fault(mm, vma, address, write);
- if (unlikely(fault & VM_FAULT_ERROR)) {
- if (fault & VM_FAULT_OOM)
- goto out_of_memory;
- else if (fault & VM_FAULT_SIGBUS)
- goto do_sigbus;
- BUG();
- }
- if (fault & VM_FAULT_MAJOR)
- tsk->maj_flt++;
- else
- tsk->min_flt++;
-
-#ifdef CONFIG_X86_32
- /*
- * Did it hit the DOS screen memory VA from vm86 mode?
- */
- if (v8086_mode(regs)) {
- unsigned long bit = (address - 0xA0000) >> PAGE_SHIFT;
- if (bit < 32)
- tsk->thread.screen_bitmap |= 1 << bit;
- }
-#endif
- up_read(&mm->mmap_sem);
- return;
-
-/*
- * Something tried to access memory that isn't in our memory map..
- * Fix it, but check if it's kernel or user first..
- */
-bad_area:
- up_read(&mm->mmap_sem);
-
-bad_area_nosemaphore:
- /* User mode accesses just cause a SIGSEGV */
- if (error_code & PF_USER) {
- /*
- * It's possible to have interrupts off here.
- */
- local_irq_enable();
-
- /*
- * Valid to do another page fault here because this one came
- * from user space.
- */
- if (is_prefetch(regs, address, error_code))
- return;
-
- if (is_errata100(regs, address))
- return;
-
- if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) &&
- printk_ratelimit()) {
- printk(
-#ifdef CONFIG_X86_32
- "%s%s[%d]: segfault at %lx ip %08lx sp %08lx error %lx",
-#else
- "%s%s[%d]: segfault at %lx ip %lx sp %lx error %lx",
-#endif
- task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
- tsk->comm, task_pid_nr(tsk), address, regs->ip,
- regs->sp, error_code);
- print_vma_addr(" in ", regs->ip);
- printk("\n");
- }
-
- tsk->thread.cr2 = address;
- /* Kernel addresses are always protection faults */
- tsk->thread.error_code = error_code | (address >= TASK_SIZE);
- tsk->thread.trap_no = 14;
- force_sig_info_fault(SIGSEGV, si_code, address, tsk);
- return;
- }
-
- if (is_f00f_bug(regs, address))
- return;
-
-no_context:
- /* Are we prepared to handle this kernel fault? */
- if (fixup_exception(regs))
- return;
-
- /*
- * X86_32
- * Valid to do another page fault here, because if this fault
- * had been triggered by is_prefetch fixup_exception would have
- * handled it.
- *
- * X86_64
- * Hall of shame of CPU/BIOS bugs.
- */
- if (is_prefetch(regs, address, error_code))
- return;
-
- if (is_errata93(regs, address))
- return;
-
-/*
- * Oops. The kernel tried to access some bad page. We'll have to
- * terminate things with extreme prejudice.
- */
-#ifdef CONFIG_X86_32
- bust_spinlocks(1);
-
- show_fault_oops(regs, error_code, address);
-
- tsk->thread.cr2 = address;
- tsk->thread.trap_no = 14;
- tsk->thread.error_code = error_code;
- die("Oops", regs, error_code);
- bust_spinlocks(0);
- do_exit(SIGKILL);
-#else /* CONFIG_X86_64 */
- flags = oops_begin();
-
- show_fault_oops(regs, error_code, address);
-
- tsk->thread.cr2 = address;
- tsk->thread.trap_no = 14;
- tsk->thread.error_code = error_code;
- if (__die("Oops", regs, error_code))
- regs = NULL;
- /* Executive summary in case the body of the oops scrolled away */
- printk(KERN_EMERG "CR2: %016lx\n", address);
- oops_end(flags, regs, SIGKILL);
-#endif
-
-/*
- * We ran out of memory, or some other thing happened to us that made
- * us unable to handle the page fault gracefully.
- */
-out_of_memory:
- up_read(&mm->mmap_sem);
-#ifdef CONFIG_X86_32
- if (is_global_init(tsk)) {
- yield();
- down_read(&mm->mmap_sem);
- goto survive;
- }
-#else
- if (is_global_init(current)) {
- yield();
- goto again;
- }
-#endif
- printk("VM: killing process %s\n", tsk->comm);
- if (error_code & PF_USER)
- do_group_exit(SIGKILL);
- goto no_context;
-
-do_sigbus:
- up_read(&mm->mmap_sem);
-
- /* Kernel mode? Handle exceptions or die */
- if (!(error_code & PF_USER))
- goto no_context;
-#ifdef CONFIG_X86_32
- /* User space => ok to do another page fault */
- if (is_prefetch(regs, address, error_code))
- return;
-#endif
- tsk->thread.cr2 = address;
- tsk->thread.error_code = error_code;
- tsk->thread.trap_no = 14;
- force_sig_info_fault(SIGBUS, BUS_ADRERR, address, tsk);
-}
-
-#ifdef CONFIG_X86_64
-DEFINE_SPINLOCK(pgd_lock);
-LIST_HEAD(pgd_list);
-#endif
-
-void vmalloc_sync_all(void)
-{
-#ifdef CONFIG_X86_32
- /*
- * Note that races in the updates of insync and start aren't
- * problematic: insync can only get set bits added, and updates to
- * start are only improving performance (without affecting correctness
- * if undone).
- */
- static DECLARE_BITMAP(insync, PTRS_PER_PGD);
- static unsigned long start = TASK_SIZE;
- unsigned long address;
-
- if (SHARED_KERNEL_PMD)
- return;
-
- BUILD_BUG_ON(TASK_SIZE & ~PGDIR_MASK);
- for (address = start; address >= TASK_SIZE; address += PGDIR_SIZE) {
- if (!test_bit(pgd_index(address), insync)) {
- unsigned long flags;
- struct page *page;
-
- spin_lock_irqsave(&pgd_lock, flags);
- for (page = pgd_list; page; page =
- (struct page *)page->index)
- if (!vmalloc_sync_one(page_address(page),
- address)) {
- BUG_ON(page != pgd_list);
- break;
- }
- spin_unlock_irqrestore(&pgd_lock, flags);
- if (!page)
- set_bit(pgd_index(address), insync);
- }
- if (address == start && test_bit(pgd_index(address), insync))
- start = address + PGDIR_SIZE;
- }
-#else /* CONFIG_X86_64 */
- /*
- * Note that races in the updates of insync and start aren't
- * problematic: insync can only get set bits added, and updates to
- * start are only improving performance (without affecting correctness
- * if undone).
- */
- static DECLARE_BITMAP(insync, PTRS_PER_PGD);
- static unsigned long start = VMALLOC_START & PGDIR_MASK;
- unsigned long address;
-
- for (address = start; address <= VMALLOC_END; address += PGDIR_SIZE) {
- if (!test_bit(pgd_index(address), insync)) {
- const pgd_t *pgd_ref = pgd_offset_k(address);
- struct page *page;
-
- if (pgd_none(*pgd_ref))
- continue;
- spin_lock(&pgd_lock);
- list_for_each_entry(page, &pgd_list, lru) {
- pgd_t *pgd;
- pgd = (pgd_t *)page_address(page) + pgd_index(address);
- if (pgd_none(*pgd))
- set_pgd(pgd, *pgd_ref);
- else
- BUG_ON(pgd_page_vaddr(*pgd) != pgd_page_vaddr(*pgd_ref));
- }
- spin_unlock(&pgd_lock);
- set_bit(pgd_index(address), insync);
- }
- if (address == start)
- start = address + PGDIR_SIZE;
- }
- /* Check that there is no need to do the same for the modules area. */
- BUILD_BUG_ON(!(MODULES_VADDR > __START_KERNEL));
- BUILD_BUG_ON(!(((MODULES_END - 1) & PGDIR_MASK) ==
- (__START_KERNEL & PGDIR_MASK)));
-#endif
-}
+++ /dev/null
-/*
- * Copyright (C) 1995 Linus Torvalds
- * Copyright (C) 2001,2002 Andi Kleen, SuSE Labs.
- */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-#include <linux/vt_kern.h> /* For unblank_screen() */
-#include <linux/compiler.h>
-#include <linux/vmalloc.h>
-#include <linux/module.h>
-#include <linux/kprobes.h>
-#include <linux/uaccess.h>
-#include <linux/kdebug.h>
-
-#include <asm/system.h>
-#include <asm/pgalloc.h>
-#include <asm/smp.h>
-#include <asm/tlbflush.h>
-#include <asm/proto.h>
-#include <asm-generic/sections.h>
-
-/*
- * Page fault error code bits
- * bit 0 == 0 means no page found, 1 means protection fault
- * bit 1 == 0 means read, 1 means write
- * bit 2 == 0 means kernel, 1 means user-mode
- * bit 3 == 1 means use of reserved bit detected
- * bit 4 == 1 means fault was an instruction fetch
- */
-#define PF_PROT (1<<0)
-#define PF_WRITE (1<<1)
-#define PF_USER (1<<2)
-#define PF_RSVD (1<<3)
-#define PF_INSTR (1<<4)
-
-static inline int notify_page_fault(struct pt_regs *regs)
-{
-#ifdef CONFIG_KPROBES
- int ret = 0;
-
- /* kprobe_running() needs smp_processor_id() */
-#ifdef CONFIG_X86_32
- if (!user_mode_vm(regs)) {
-#else
- if (!user_mode(regs)) {
-#endif
- preempt_disable();
- if (kprobe_running() && kprobe_fault_handler(regs, 14))
- ret = 1;
- preempt_enable();
- }
-
- return ret;
-#else
- return 0;
-#endif
-}
-
-/*
- * X86_32
- * Sometimes AMD Athlon/Opteron CPUs report invalid exceptions on prefetch.
- * Check that here and ignore it.
- *
- * X86_64
- * Sometimes the CPU reports invalid exceptions on prefetch.
- * Check that here and ignore it.
- *
- * Opcode checker based on code by Richard Brunner
- */
-static int is_prefetch(struct pt_regs *regs, unsigned long addr,
- unsigned long error_code)
-{
- unsigned char *instr;
- int scan_more = 1;
- int prefetch = 0;
- unsigned char *max_instr;
-
-#ifdef CONFIG_X86_32
- if (unlikely(boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
- boot_cpu_data.x86 >= 6)) {
- /* Catch an obscure case of prefetch inside an NX page. */
- if (nx_enabled && (error_code & PF_INSTR))
- return 0;
- } else {
- return 0;
- }
-#else
- /* If it was a exec fault ignore */
- if (error_code & PF_INSTR)
- return 0;
-#endif
-
- instr = (unsigned char *)convert_ip_to_linear(current, regs);
- max_instr = instr + 15;
-
- if (user_mode(regs) && instr >= (unsigned char *)TASK_SIZE)
- return 0;
-
- while (scan_more && instr < max_instr) {
- unsigned char opcode;
- unsigned char instr_hi;
- unsigned char instr_lo;
-
- if (probe_kernel_address(instr, opcode))
- break;
-
- instr_hi = opcode & 0xf0;
- instr_lo = opcode & 0x0f;
- instr++;
-
- switch (instr_hi) {
- case 0x20:
- case 0x30:
- /*
- * Values 0x26,0x2E,0x36,0x3E are valid x86 prefixes.
- * In X86_64 long mode, the CPU will signal invalid
- * opcode if some of these prefixes are present so
- * X86_64 will never get here anyway
- */
- scan_more = ((instr_lo & 7) == 0x6);
- break;
-#ifdef CONFIG_X86_64
- case 0x40:
- /*
- * In AMD64 long mode 0x40..0x4F are valid REX prefixes
- * Need to figure out under what instruction mode the
- * instruction was issued. Could check the LDT for lm,
- * but for now it's good enough to assume that long
- * mode only uses well known segments or kernel.
- */
- scan_more = (!user_mode(regs)) || (regs->cs == __USER_CS);
- break;
-#endif
- case 0x60:
- /* 0x64 thru 0x67 are valid prefixes in all modes. */
- scan_more = (instr_lo & 0xC) == 0x4;
- break;
- case 0xF0:
- /* 0xF0, 0xF2, 0xF3 are valid prefixes in all modes. */
- scan_more = !instr_lo || (instr_lo>>1) == 1;
- break;
- case 0x00:
- /* Prefetch instruction is 0x0F0D or 0x0F18 */
- scan_more = 0;
-
- if (probe_kernel_address(instr, opcode))
- break;
- prefetch = (instr_lo == 0xF) &&
- (opcode == 0x0D || opcode == 0x18);
- break;
- default:
- scan_more = 0;
- break;
- }
- }
- return prefetch;
-}
-
-static void force_sig_info_fault(int si_signo, int si_code,
- unsigned long address, struct task_struct *tsk)
-{
- siginfo_t info;
-
- info.si_signo = si_signo;
- info.si_errno = 0;
- info.si_code = si_code;
- info.si_addr = (void __user *)address;
- force_sig_info(si_signo, &info, tsk);
-}
-
-#ifdef CONFIG_X86_64
-static int bad_address(void *p)
-{
- unsigned long dummy;
- return probe_kernel_address((unsigned long *)p, dummy);
-}
-#endif
-
-void dump_pagetable(unsigned long address)
-{
-#ifdef CONFIG_X86_32
- __typeof__(pte_val(__pte(0))) page;
-
- page = read_cr3();
- page = ((__typeof__(page) *) __va(page))[address >> PGDIR_SHIFT];
-#ifdef CONFIG_X86_PAE
- printk("*pdpt = %016Lx ", page);
- if ((page >> PAGE_SHIFT) < max_low_pfn
- && page & _PAGE_PRESENT) {
- page &= PAGE_MASK;
- page = ((__typeof__(page) *) __va(page))[(address >> PMD_SHIFT)
- & (PTRS_PER_PMD - 1)];
- printk(KERN_CONT "*pde = %016Lx ", page);
- page &= ~_PAGE_NX;
- }
-#else
- printk("*pde = %08lx ", page);
-#endif
-
- /*
- * We must not directly access the pte in the highpte
- * case if the page table is located in highmem.
- * And let's rather not kmap-atomic the pte, just in case
- * it's allocated already.
- */
- if ((page >> PAGE_SHIFT) < max_low_pfn
- && (page & _PAGE_PRESENT)
- && !(page & _PAGE_PSE)) {
- page &= PAGE_MASK;
- page = ((__typeof__(page) *) __va(page))[(address >> PAGE_SHIFT)
- & (PTRS_PER_PTE - 1)];
- printk("*pte = %0*Lx ", sizeof(page)*2, (u64)page);
- }
-
- printk("\n");
-#else /* CONFIG_X86_64 */
- pgd_t *pgd;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *pte;
-
- pgd = (pgd_t *)read_cr3();
-
- pgd = __va((unsigned long)pgd & PHYSICAL_PAGE_MASK);
- pgd += pgd_index(address);
- if (bad_address(pgd)) goto bad;
- printk("PGD %lx ", pgd_val(*pgd));
- if (!pgd_present(*pgd)) goto ret;
-
- pud = pud_offset(pgd, address);
- if (bad_address(pud)) goto bad;
- printk("PUD %lx ", pud_val(*pud));
- if (!pud_present(*pud)) goto ret;
-
- pmd = pmd_offset(pud, address);
- if (bad_address(pmd)) goto bad;
- printk("PMD %lx ", pmd_val(*pmd));
- if (!pmd_present(*pmd) || pmd_large(*pmd)) goto ret;
-
- pte = pte_offset_kernel(pmd, address);
- if (bad_address(pte)) goto bad;
- printk("PTE %lx", pte_val(*pte));
-ret:
- printk("\n");
- return;
-bad:
- printk("BAD\n");
-#endif
-}
-
-#ifdef CONFIG_X86_32
-static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address)
-{
- unsigned index = pgd_index(address);
- pgd_t *pgd_k;
- pud_t *pud, *pud_k;
- pmd_t *pmd, *pmd_k;
-
- pgd += index;
- pgd_k = init_mm.pgd + index;
-
- if (!pgd_present(*pgd_k))
- return NULL;
-
- /*
- * set_pgd(pgd, *pgd_k); here would be useless on PAE
- * and redundant with the set_pmd() on non-PAE. As would
- * set_pud.
- */
-
- pud = pud_offset(pgd, address);
- pud_k = pud_offset(pgd_k, address);
- if (!pud_present(*pud_k))
- return NULL;
-
- pmd = pmd_offset(pud, address);
- pmd_k = pmd_offset(pud_k, address);
- if (!pmd_present(*pmd_k))
- return NULL;
- if (!pmd_present(*pmd)) {
- set_pmd(pmd, *pmd_k);
- arch_flush_lazy_mmu_mode();
- } else
- BUG_ON(pmd_page(*pmd) != pmd_page(*pmd_k));
- return pmd_k;
-}
-#endif
-
-#ifdef CONFIG_X86_64
-static const char errata93_warning[] =
-KERN_ERR "******* Your BIOS seems to not contain a fix for K8 errata #93\n"
-KERN_ERR "******* Working around it, but it may cause SEGVs or burn power.\n"
-KERN_ERR "******* Please consider a BIOS update.\n"
-KERN_ERR "******* Disabling USB legacy in the BIOS may also help.\n";
-#endif
-
-/* Workaround for K8 erratum #93 & buggy BIOS.
- BIOS SMM functions are required to use a specific workaround
- to avoid corruption of the 64bit RIP register on C stepping K8.
- A lot of BIOS that didn't get tested properly miss this.
- The OS sees this as a page fault with the upper 32bits of RIP cleared.
- Try to work around it here.
- Note we only handle faults in kernel here.
- Does nothing for X86_32
- */
-static int is_errata93(struct pt_regs *regs, unsigned long address)
-{
-#ifdef CONFIG_X86_64
- static int warned;
- if (address != regs->ip)
- return 0;
- if ((address >> 32) != 0)
- return 0;
- address |= 0xffffffffUL << 32;
- if ((address >= (u64)_stext && address <= (u64)_etext) ||
- (address >= MODULES_VADDR && address <= MODULES_END)) {
- if (!warned) {
- printk(errata93_warning);
- warned = 1;
- }
- regs->ip = address;
- return 1;
- }
-#endif
- return 0;
-}
-
-/*
- * Work around K8 erratum #100 K8 in compat mode occasionally jumps to illegal
- * addresses >4GB. We catch this in the page fault handler because these
- * addresses are not reachable. Just detect this case and return. Any code
- * segment in LDT is compatibility mode.
- */
-static int is_errata100(struct pt_regs *regs, unsigned long address)
-{
-#ifdef CONFIG_X86_64
- if ((regs->cs == __USER32_CS || (regs->cs & (1<<2))) &&
- (address >> 32))
- return 1;
-#endif
- return 0;
-}
-
-void do_invalid_op(struct pt_regs *, unsigned long);
-
-static int is_f00f_bug(struct pt_regs *regs, unsigned long address)
-{
-#ifdef CONFIG_X86_F00F_BUG
- unsigned long nr;
- /*
- * Pentium F0 0F C7 C8 bug workaround.
- */
- if (boot_cpu_data.f00f_bug) {
- nr = (address - idt_descr.address) >> 3;
-
- if (nr == 6) {
- do_invalid_op(regs, 0);
- return 1;
- }
- }
-#endif
- return 0;
-}
-
-static void show_fault_oops(struct pt_regs *regs, unsigned long error_code,
- unsigned long address)
-{
-#ifdef CONFIG_X86_32
- if (!oops_may_print())
- return;
-
-#ifdef CONFIG_X86_PAE
- if (error_code & PF_INSTR) {
- int level;
- pte_t *pte = lookup_address(address, &level);
-
- if (pte && pte_present(*pte) && !pte_exec(*pte))
- printk(KERN_CRIT "kernel tried to execute "
- "NX-protected page - exploit attempt? "
- "(uid: %d)\n", current->uid);
- }
-#endif
- printk(KERN_ALERT "BUG: unable to handle kernel ");
- if (address < PAGE_SIZE)
- printk(KERN_CONT "NULL pointer dereference");
- else
- printk(KERN_CONT "paging request");
- printk(KERN_CONT " at %08lx\n", address);
-
- printk(KERN_ALERT "IP:");
- printk_address(regs->ip, 1);
- dump_pagetable(address);
-#else /* CONFIG_X86_64 */
- printk(KERN_ALERT "BUG: unable to handle kernel ");
- if (address < PAGE_SIZE)
- printk(KERN_CONT "NULL pointer dereference");
- else
- printk(KERN_CONT "paging request");
- printk(KERN_CONT " at %016lx\n", address);
-
- printk(KERN_ALERT "IP:");
- printk_address(regs->ip, 1);
- dump_pagetable(address);
-#endif
-}
-
-#ifdef CONFIG_X86_64
-static noinline void pgtable_bad(unsigned long address, struct pt_regs *regs,
- unsigned long error_code)
-{
- unsigned long flags = oops_begin();
- struct task_struct *tsk;
-
- printk(KERN_ALERT "%s: Corrupted page table at address %lx\n",
- current->comm, address);
- dump_pagetable(address);
- tsk = current;
- tsk->thread.cr2 = address;
- tsk->thread.trap_no = 14;
- tsk->thread.error_code = error_code;
- if (__die("Bad pagetable", regs, error_code))
- regs = NULL;
- oops_end(flags, regs, SIGKILL);
-}
-#endif
-
-/*
- * X86_32
- * Handle a fault on the vmalloc or module mapping area
- *
- * X86_64
- * Handle a fault on the vmalloc area
- *
- * This assumes no large pages in there.
- */
-static int vmalloc_fault(unsigned long address)
-{
-#ifdef CONFIG_X86_32
- unsigned long pgd_paddr;
- pmd_t *pmd_k;
- pte_t *pte_k;
- /*
- * Synchronize this task's top level page-table
- * with the 'reference' page table.
- *
- * Do _not_ use "current" here. We might be inside
- * an interrupt in the middle of a task switch..
- */
- pgd_paddr = read_cr3();
- pmd_k = vmalloc_sync_one(__va(pgd_paddr), address);
- if (!pmd_k)
- return -1;
- pte_k = pte_offset_kernel(pmd_k, address);
- if (!pte_present(*pte_k))
- return -1;
- return 0;
-#else
- pgd_t *pgd, *pgd_ref;
- pud_t *pud, *pud_ref;
- pmd_t *pmd, *pmd_ref;
- pte_t *pte, *pte_ref;
-
- /* Copy kernel mappings over when needed. This can also
- happen within a race in page table update. In the later
- case just flush. */
-
- pgd = pgd_offset(current->mm ?: &init_mm, address);
- pgd_ref = pgd_offset_k(address);
- if (pgd_none(*pgd_ref))
- return -1;
- if (pgd_none(*pgd))
- set_pgd(pgd, *pgd_ref);
- else
- BUG_ON(pgd_page_vaddr(*pgd) != pgd_page_vaddr(*pgd_ref));
-
- /* Below here mismatches are bugs because these lower tables
- are shared */
-
- pud = pud_offset(pgd, address);
- pud_ref = pud_offset(pgd_ref, address);
- if (pud_none(*pud_ref))
- return -1;
- if (pud_none(*pud) || pud_page_vaddr(*pud) != pud_page_vaddr(*pud_ref))
- BUG();
- pmd = pmd_offset(pud, address);
- pmd_ref = pmd_offset(pud_ref, address);
- if (pmd_none(*pmd_ref))
- return -1;
- if (pmd_none(*pmd) || pmd_page(*pmd) != pmd_page(*pmd_ref))
- BUG();
- pte_ref = pte_offset_kernel(pmd_ref, address);
- if (!pte_present(*pte_ref))
- return -1;
- pte = pte_offset_kernel(pmd, address);
- /* Don't use pte_page here, because the mappings can point
- outside mem_map, and the NUMA hash lookup cannot handle
- that. */
- if (!pte_present(*pte) || pte_pfn(*pte) != pte_pfn(*pte_ref))
- BUG();
- return 0;
-#endif
-}
-
-int show_unhandled_signals = 1;
-
-/*
- * This routine handles page faults. It determines the address,
- * and the problem, and then passes it off to one of the appropriate
- * routines.
- */
-#ifdef CONFIG_X86_64
-asmlinkage
-#endif
-void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
-{
- struct task_struct *tsk;
- struct mm_struct *mm;
- struct vm_area_struct *vma;
- unsigned long address;
- int write, si_code;
- int fault;
-#ifdef CONFIG_X86_64
- unsigned long flags;
-#endif
-
- /*
- * We can fault from pretty much anywhere, with unknown IRQ state.
- */
- trace_hardirqs_fixup();
-
- tsk = current;
- mm = tsk->mm;
- prefetchw(&mm->mmap_sem);
-
- /* get the address */
- address = read_cr2();
-
- si_code = SEGV_MAPERR;
-
- if (notify_page_fault(regs))
- return;
-
- /*
- * We fault-in kernel-space virtual memory on-demand. The
- * 'reference' page table is init_mm.pgd.
- *
- * NOTE! We MUST NOT take any locks for this case. We may
- * be in an interrupt or a critical region, and should
- * only copy the information from the master page table,
- * nothing more.
- *
- * This verifies that the fault happens in kernel space
- * (error_code & 4) == 0, and that the fault was not a
- * protection error (error_code & 9) == 0.
- */
-#ifdef CONFIG_X86_32
- if (unlikely(address >= TASK_SIZE)) {
- if (!(error_code & (PF_RSVD|PF_USER|PF_PROT)) &&
- vmalloc_fault(address) >= 0)
- return;
- /*
- * Don't take the mm semaphore here. If we fixup a prefetch
- * fault we could otherwise deadlock.
- */
- goto bad_area_nosemaphore;
- }
-
- /* It's safe to allow irq's after cr2 has been saved and the vmalloc
- fault has been handled. */
- if (regs->flags & (X86_EFLAGS_IF|VM_MASK))
- local_irq_enable();
-
- /*
- * If we're in an interrupt, have no user context or are running in an
- * atomic region then we must not take the fault.
- */
- if (in_atomic() || !mm)
- goto bad_area_nosemaphore;
-#else /* CONFIG_X86_64 */
- if (unlikely(address >= TASK_SIZE64)) {
- /*
- * Don't check for the module range here: its PML4
- * is always initialized because it's shared with the main
- * kernel text. Only vmalloc may need PML4 syncups.
- */
- if (!(error_code & (PF_RSVD|PF_USER|PF_PROT)) &&
- ((address >= VMALLOC_START && address < VMALLOC_END))) {
- if (vmalloc_fault(address) >= 0)
- return;
- }
- /*
- * Don't take the mm semaphore here. If we fixup a prefetch
- * fault we could otherwise deadlock.
- */
- goto bad_area_nosemaphore;
- }
- if (likely(regs->flags & X86_EFLAGS_IF))
- local_irq_enable();
-
- if (unlikely(error_code & PF_RSVD))
- pgtable_bad(address, regs, error_code);
-
- /*
- * If we're in an interrupt, have no user context or are running in an
- * atomic region then we must not take the fault.
- */
- if (unlikely(in_atomic() || !mm))
- goto bad_area_nosemaphore;
-
- /*
- * User-mode registers count as a user access even for any
- * potential system fault or CPU buglet.
- */
- if (user_mode_vm(regs))
- error_code |= PF_USER;
-again:
-#endif
- /* When running in the kernel we expect faults to occur only to
- * addresses in user space. All other faults represent errors in the
- * kernel and should generate an OOPS. Unfortunately, in the case of an
- * erroneous fault occurring in a code path which already holds mmap_sem
- * we will deadlock attempting to validate the fault against the
- * address space. Luckily the kernel only validly references user
- * space from well defined areas of code, which are listed in the
- * exceptions table.
- *
- * As the vast majority of faults will be valid we will only perform
- * the source reference check when there is a possibility of a deadlock.
- * Attempt to lock the address space, if we cannot we then validate the
- * source. If this is invalid we can skip the address space check,
- * thus avoiding the deadlock.
- */
- if (!down_read_trylock(&mm->mmap_sem)) {
- if ((error_code & PF_USER) == 0 &&
- !search_exception_tables(regs->ip))
- goto bad_area_nosemaphore;
- down_read(&mm->mmap_sem);
- }
-
- vma = find_vma(mm, address);
- if (!vma)
- goto bad_area;
-#ifdef CONFIG_X86_32
- if (vma->vm_start <= address)
-#else
- if (likely(vma->vm_start <= address))
-#endif
- goto good_area;
- if (!(vma->vm_flags & VM_GROWSDOWN))
- goto bad_area;
- if (error_code & PF_USER) {
- /*
- * Accessing the stack below %sp is always a bug.
- * The large cushion allows instructions like enter
- * and pusha to work. ("enter $65535,$31" pushes
- * 32 pointers and then decrements %sp by 65535.)
- */
- if (address + 65536 + 32 * sizeof(unsigned long) < regs->sp)
- goto bad_area;
- }
- if (expand_stack(vma, address))
- goto bad_area;
-/*
- * Ok, we have a good vm_area for this memory access, so
- * we can handle it..
- */
-good_area:
- si_code = SEGV_ACCERR;
- write = 0;
- switch (error_code & (PF_PROT|PF_WRITE)) {
- default: /* 3: write, present */
- /* fall through */
- case PF_WRITE: /* write, not present */
- if (!(vma->vm_flags & VM_WRITE))
- goto bad_area;
- write++;
- break;
- case PF_PROT: /* read, present */
- goto bad_area;
- case 0: /* read, not present */
- if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE)))
- goto bad_area;
- }
-
-#ifdef CONFIG_X86_32
-survive:
-#endif
- /*
- * If for any reason at all we couldn't handle the fault,
- * make sure we exit gracefully rather than endlessly redo
- * the fault.
- */
- fault = handle_mm_fault(mm, vma, address, write);
- if (unlikely(fault & VM_FAULT_ERROR)) {
- if (fault & VM_FAULT_OOM)
- goto out_of_memory;
- else if (fault & VM_FAULT_SIGBUS)
- goto do_sigbus;
- BUG();
- }
- if (fault & VM_FAULT_MAJOR)
- tsk->maj_flt++;
- else
- tsk->min_flt++;
-
-#ifdef CONFIG_X86_32
- /*
- * Did it hit the DOS screen memory VA from vm86 mode?
- */
- if (v8086_mode(regs)) {
- unsigned long bit = (address - 0xA0000) >> PAGE_SHIFT;
- if (bit < 32)
- tsk->thread.screen_bitmap |= 1 << bit;
- }
-#endif
- up_read(&mm->mmap_sem);
- return;
-
-/*
- * Something tried to access memory that isn't in our memory map..
- * Fix it, but check if it's kernel or user first..
- */
-bad_area:
- up_read(&mm->mmap_sem);
-
-bad_area_nosemaphore:
- /* User mode accesses just cause a SIGSEGV */
- if (error_code & PF_USER) {
- /*
- * It's possible to have interrupts off here.
- */
- local_irq_enable();
-
- /*
- * Valid to do another page fault here because this one came
- * from user space.
- */
- if (is_prefetch(regs, address, error_code))
- return;
-
- if (is_errata100(regs, address))
- return;
-
- if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) &&
- printk_ratelimit()) {
- printk(
-#ifdef CONFIG_X86_32
- "%s%s[%d]: segfault at %lx ip %08lx sp %08lx error %lx",
-#else
- "%s%s[%d]: segfault at %lx ip %lx sp %lx error %lx",
-#endif
- task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
- tsk->comm, task_pid_nr(tsk), address, regs->ip,
- regs->sp, error_code);
- print_vma_addr(" in ", regs->ip);
- printk("\n");
- }
-
- tsk->thread.cr2 = address;
- /* Kernel addresses are always protection faults */
- tsk->thread.error_code = error_code | (address >= TASK_SIZE);
- tsk->thread.trap_no = 14;
- force_sig_info_fault(SIGSEGV, si_code, address, tsk);
- return;
- }
-
- if (is_f00f_bug(regs, address))
- return;
-
-no_context:
- /* Are we prepared to handle this kernel fault? */
- if (fixup_exception(regs))
- return;
-
- /*
- * X86_32
- * Valid to do another page fault here, because if this fault
- * had been triggered by is_prefetch fixup_exception would have
- * handled it.
- *
- * X86_64
- * Hall of shame of CPU/BIOS bugs.
- */
- if (is_prefetch(regs, address, error_code))
- return;
-
- if (is_errata93(regs, address))
- return;
-
-/*
- * Oops. The kernel tried to access some bad page. We'll have to
- * terminate things with extreme prejudice.
- */
-#ifdef CONFIG_X86_32
- bust_spinlocks(1);
-
- show_fault_oops(regs, error_code, address);
-
- tsk->thread.cr2 = address;
- tsk->thread.trap_no = 14;
- tsk->thread.error_code = error_code;
- die("Oops", regs, error_code);
- bust_spinlocks(0);
- do_exit(SIGKILL);
-#else /* CONFIG_X86_64 */
- flags = oops_begin();
-
- show_fault_oops(regs, error_code, address);
-
- tsk->thread.cr2 = address;
- tsk->thread.trap_no = 14;
- tsk->thread.error_code = error_code;
- if (__die("Oops", regs, error_code))
- regs = NULL;
- /* Executive summary in case the body of the oops scrolled away */
- printk(KERN_EMERG "CR2: %016lx\n", address);
- oops_end(flags, regs, SIGKILL);
-#endif
-
-/*
- * We ran out of memory, or some other thing happened to us that made
- * us unable to handle the page fault gracefully.
- */
-out_of_memory:
- up_read(&mm->mmap_sem);
-#ifdef CONFIG_X86_32
- if (is_global_init(tsk)) {
- yield();
- down_read(&mm->mmap_sem);
- goto survive;
- }
-#else
- if (is_global_init(current)) {
- yield();
- goto again;
- }
-#endif
- printk("VM: killing process %s\n", tsk->comm);
- if (error_code & PF_USER)
- do_group_exit(SIGKILL);
- goto no_context;
-
-do_sigbus:
- up_read(&mm->mmap_sem);
-
- /* Kernel mode? Handle exceptions or die */
- if (!(error_code & PF_USER))
- goto no_context;
-#ifdef CONFIG_X86_32
- /* User space => ok to do another page fault */
- if (is_prefetch(regs, address, error_code))
- return;
-#endif
- tsk->thread.cr2 = address;
- tsk->thread.error_code = error_code;
- tsk->thread.trap_no = 14;
- force_sig_info_fault(SIGBUS, BUS_ADRERR, address, tsk);
-}
-
-#ifdef CONFIG_X86_64
-DEFINE_SPINLOCK(pgd_lock);
-LIST_HEAD(pgd_list);
-#endif
-
-void vmalloc_sync_all(void)
-{
-#ifdef CONFIG_X86_32
- /*
- * Note that races in the updates of insync and start aren't
- * problematic: insync can only get set bits added, and updates to
- * start are only improving performance (without affecting correctness
- * if undone).
- */
- static DECLARE_BITMAP(insync, PTRS_PER_PGD);
- static unsigned long start = TASK_SIZE;
- unsigned long address;
-
- if (SHARED_KERNEL_PMD)
- return;
-
- BUILD_BUG_ON(TASK_SIZE & ~PGDIR_MASK);
- for (address = start; address >= TASK_SIZE; address += PGDIR_SIZE) {
- if (!test_bit(pgd_index(address), insync)) {
- unsigned long flags;
- struct page *page;
-
- spin_lock_irqsave(&pgd_lock, flags);
- for (page = pgd_list; page; page =
- (struct page *)page->index)
- if (!vmalloc_sync_one(page_address(page),
- address)) {
- BUG_ON(page != pgd_list);
- break;
- }
- spin_unlock_irqrestore(&pgd_lock, flags);
- if (!page)
- set_bit(pgd_index(address), insync);
- }
- if (address == start && test_bit(pgd_index(address), insync))
- start = address + PGDIR_SIZE;
- }
-#else /* CONFIG_X86_64 */
- /*
- * Note that races in the updates of insync and start aren't
- * problematic: insync can only get set bits added, and updates to
- * start are only improving performance (without affecting correctness
- * if undone).
- */
- static DECLARE_BITMAP(insync, PTRS_PER_PGD);
- static unsigned long start = VMALLOC_START & PGDIR_MASK;
- unsigned long address;
-
- for (address = start; address <= VMALLOC_END; address += PGDIR_SIZE) {
- if (!test_bit(pgd_index(address), insync)) {
- const pgd_t *pgd_ref = pgd_offset_k(address);
- struct page *page;
-
- if (pgd_none(*pgd_ref))
- continue;
- spin_lock(&pgd_lock);
- list_for_each_entry(page, &pgd_list, lru) {
- pgd_t *pgd;
- pgd = (pgd_t *)page_address(page) + pgd_index(address);
- if (pgd_none(*pgd))
- set_pgd(pgd, *pgd_ref);
- else
- BUG_ON(pgd_page_vaddr(*pgd) != pgd_page_vaddr(*pgd_ref));
- }
- spin_unlock(&pgd_lock);
- set_bit(pgd_index(address), insync);
- }
- if (address == start)
- start = address + PGDIR_SIZE;
- }
- /* Check that there is no need to do the same for the modules area. */
- BUILD_BUG_ON(!(MODULES_VADDR > __START_KERNEL));
- BUILD_BUG_ON(!(((MODULES_END - 1) & PGDIR_MASK) ==
- (__START_KERNEL & PGDIR_MASK)));
-#endif
-}
projects / mirror_ubuntu-kernels.git / commitdiff