Cleanup patch to remove the unnecessary comments and commented code.
Also updated description for few of comments.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
return 0;
}
-/* The u8IfIdx starts from 0 to NUM_CONCURRENT_IFC -1, but 0 index used as
+/* The idx starts from 0 to (NUM_CONCURRENT_IFC - 1), but 0 index used as
* special purpose in wilc device, so we add 1 to the index to starts from 1.
* As a result, the returned index will be 1 to NUM_CONCURRENT_IFC.
*/
/* We need to minus 1 from idx which is from wilc device to get real index
* of wilc->vif[], because we add 1 when pass to wilc device in the function
* wilc_get_vif_idx.
- * As a result, the index should be between 0 and NUM_CONCURRENT_IFC -1.
+ * As a result, the index should be between 0 and (NUM_CONCURRENT_IFC - 1).
*/
static struct wilc_vif *wilc_get_vif_from_idx(struct wilc *wilc, int idx)
{
cb_hdr->hdr.it_present = cpu_to_le32(TX_RADIOTAP_PRESENT);
- cb_hdr->rate = 5; /* txrate->bitrate / 5; */
+ cb_hdr->rate = 5;
if (pkt_offset & IS_MGMT_STATUS_SUCCES) {
/* success */
hdr->hdr.it_version = 0; /* PKTHDR_RADIOTAP_VERSION; */
hdr->hdr.it_len = cpu_to_le16(sizeof(*hdr));
hdr->hdr.it_present = cpu_to_le32
- (1 << IEEE80211_RADIOTAP_RATE); /* | */
- hdr->rate = 5; /* txrate->bitrate / 5; */
+ (1 << IEEE80211_RADIOTAP_RATE);
+ hdr->rate = 5;
}
skb->dev = wilc_wfi_mon;
cb_hdr->hdr.it_present = cpu_to_le32(TX_RADIOTAP_PRESENT);
- cb_hdr->rate = 5; /* txrate->bitrate / 5; */
+ cb_hdr->rate = 5;
cb_hdr->tx_flags = 0x0004;
skb2->dev = wilc_wfi_mon;
}
skb->dev = mon_priv->real_ndev;
- /* Identify if Ethernet or MAC header (data or mgmt) */
memcpy(srcadd, &skb->data[10], 6);
memcpy(bssid, &skb->data[16], 6);
- /* if source address and bssid fields are equal>>Mac header */
- /*send it to mgmt frames handler */
+ /*
+ * Identify if data or mgmt packet, if source address and bssid
+ * fields are equal send it to mgmt frames handler
+ */
if (!(memcmp(srcadd, bssid, 6))) {
ret = mon_mgmt_tx(mon_priv->real_ndev, skb->data, skb->len);
if (ret)
static struct dentry *wilc_dir;
-/*
- * ----------------------------------------------------------------------------
- */
#define DEBUG BIT(0)
#define INFO BIT(1)
#define WRN BIT(2)
#define DBG_LEVEL_ALL (DEBUG | INFO | WRN | ERR)
static atomic_t WILC_DEBUG_LEVEL = ATOMIC_INIT(ERR);
-/*
- * ----------------------------------------------------------------------------
- */
-
static ssize_t wilc_debug_level_read(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
return count;
}
-/*
- * ----------------------------------------------------------------------------
- */
-
#define FOPS(_open, _read, _write, _poll) { \
.owner = THIS_MODULE, \
.open = (_open), \
wilc_sdio_cmd52(wilc, &cmd);
tmp = cmd.data;
- /* cmd.read_write = 0; */
- /* cmd.function = 0; */
- /* cmd.raw = 0; */
cmd.address = 0xf3;
cmd.data = 0;
wilc_sdio_cmd52(wilc, &cmd);
return 1;
}
-/********************************************
- *
- * Global sdio HIF function table
- *
- ********************************************/
-
+/* Global sdio HIF function table */
static const struct wilc_hif_func wilc_hif_sdio = {
.hif_init = sdio_init,
.hif_deinit = sdio_deinit,
u8 clockless = 0;
if (addr < 0x30) {
- /* dev_err(&spi->dev, "***** read addr %d\n\n", addr); */
/* Clockless register */
cmd = CMD_INTERNAL_READ;
clockless = 1;
};
-/*
- * This structure is private to each device. It is used to pass
- * packets in and out, so there is place for a packet
- */
-
struct wilc_wfi_key {
u8 *key;
u8 *seq;
void (*disable_interrupt)(struct wilc *nic);
};
-/********************************************
- *
- * Configuration Structure
- *
- ********************************************/
-
#define MAX_CFG_FRAME_SIZE 1468
struct wilc_cfg_frame {
#include "wilc_wlan_cfg.h"
#include "coreconfigurator.h"
-/********************************************
- *
- * Global Data
- *
- ********************************************/
enum cfg_cmd_type {
CFG_BYTE_CMD = 0,
CFG_HWORD_CMD = 1,