From: Vineet Gupta Date: Tue, 24 Jun 2014 08:25:07 +0000 (+0530) Subject: serial/arc: Refactor by referencing to uart_port where possible X-Git-Tag: v4.13~6927^2~64 X-Git-Url: https://git.proxmox.com/?a=commitdiff_plain;h=12d15e6f6377fe46b1f9dc51133890a732f1ae05;p=mirror_ubuntu-bionic-kernel.git serial/arc: Refactor by referencing to uart_port where possible The ARC UART MMIO helpers would take arc_uart_port and then reference generic uart_port->membase member. So change them to difrectly refer to uart_port and fix call sites accordingly. This removes the need for to_arc_port() converion almost eveeywhere and makes code a bit easier to read. Signed-off-by: Vineet Gupta Reviewed-by: Rob Herring Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c index b4859598e157..b58544de4e86 100644 --- a/drivers/tty/serial/arc_uart.c +++ b/drivers/tty/serial/arc_uart.c @@ -72,7 +72,7 @@ #define RXOERR 0x02 /* OverFlow Err: Char recv but RXFULL still set */ /* Uart bit fiddling helpers: lowest level */ -#define RBASE(uart, reg) (uart->port.membase + reg) +#define RBASE(port, reg) (port->membase + reg) #define UART_REG_SET(u, r, v) writeb((v), RBASE(u, r)) #define UART_REG_GET(u, r) readb(RBASE(u, r)) @@ -129,19 +129,15 @@ static struct uart_driver arc_uart_driver = { static void arc_serial_stop_rx(struct uart_port *port) { - struct arc_uart_port *uart = to_arc_port(port); - - UART_RX_IRQ_DISABLE(uart); + UART_RX_IRQ_DISABLE(port); } static void arc_serial_stop_tx(struct uart_port *port) { - struct arc_uart_port *uart = to_arc_port(port); - - while (!(UART_GET_STATUS(uart) & TXEMPTY)) + while (!(UART_GET_STATUS(port) & TXEMPTY)) cpu_relax(); - UART_TX_IRQ_DISABLE(uart); + UART_TX_IRQ_DISABLE(port); } /* @@ -149,10 +145,9 @@ static void arc_serial_stop_tx(struct uart_port *port) */ static unsigned int arc_serial_tx_empty(struct uart_port *port) { - struct arc_uart_port *uart = to_arc_port(port); unsigned int stat; - stat = UART_GET_STATUS(uart); + stat = UART_GET_STATUS(port); if (stat & TXEMPTY) return TIOCSER_TEMT; @@ -166,24 +161,24 @@ static unsigned int arc_serial_tx_empty(struct uart_port *port) * = by uart_start( ) before calling us * = tx_ist checks that too before calling */ -static void arc_serial_tx_chars(struct arc_uart_port *uart) +static void arc_serial_tx_chars(struct uart_port *port) { - struct circ_buf *xmit = &uart->port.state->xmit; + struct circ_buf *xmit = &port->state->xmit; int sent = 0; unsigned char ch; - if (unlikely(uart->port.x_char)) { - UART_SET_DATA(uart, uart->port.x_char); - uart->port.icount.tx++; - uart->port.x_char = 0; + if (unlikely(port->x_char)) { + UART_SET_DATA(port, port->x_char); + port->icount.tx++; + port->x_char = 0; sent = 1; } else if (xmit->tail != xmit->head) { /* TODO: uart_circ_empty */ ch = xmit->buf[xmit->tail]; xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - uart->port.icount.tx++; - while (!(UART_GET_STATUS(uart) & TXEMPTY)) + port->icount.tx++; + while (!(UART_GET_STATUS(port) & TXEMPTY)) cpu_relax(); - UART_SET_DATA(uart, ch); + UART_SET_DATA(port, ch); sent = 1; } @@ -192,10 +187,10 @@ static void arc_serial_tx_chars(struct arc_uart_port *uart) * By Hard ISR to schedule processing in software interrupt part */ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&uart->port); + uart_write_wakeup(port); if (sent) - UART_TX_IRQ_ENABLE(uart); + UART_TX_IRQ_ENABLE(port); } /* @@ -204,12 +199,10 @@ static void arc_serial_tx_chars(struct arc_uart_port *uart) */ static void arc_serial_start_tx(struct uart_port *port) { - struct arc_uart_port *uart = to_arc_port(port); - - arc_serial_tx_chars(uart); + arc_serial_tx_chars(port); } -static void arc_serial_rx_chars(struct arc_uart_port *uart, unsigned int status) +static void arc_serial_rx_chars(struct uart_port *port, unsigned int status) { unsigned int ch, flg = 0; @@ -229,15 +222,15 @@ static void arc_serial_rx_chars(struct arc_uart_port *uart, unsigned int status) */ if (unlikely(status & (RXOERR | RXFERR))) { if (status & RXOERR) { - uart->port.icount.overrun++; + port->icount.overrun++; flg = TTY_OVERRUN; - UART_CLR_STATUS(uart, RXOERR); + UART_CLR_STATUS(port, RXOERR); } if (status & RXFERR) { - uart->port.icount.frame++; + port->icount.frame++; flg = TTY_FRAME; - UART_CLR_STATUS(uart, RXFERR); + UART_CLR_STATUS(port, RXFERR); } } else flg = TTY_NORMAL; @@ -245,16 +238,16 @@ static void arc_serial_rx_chars(struct arc_uart_port *uart, unsigned int status) if (status & RXEMPTY) continue; - ch = UART_GET_DATA(uart); - uart->port.icount.rx++; + ch = UART_GET_DATA(port); + port->icount.rx++; - if (!(uart_handle_sysrq_char(&uart->port, ch))) - uart_insert_char(&uart->port, status, RXOERR, ch, flg); + if (!(uart_handle_sysrq_char(port, ch))) + uart_insert_char(port, status, RXOERR, ch, flg); - spin_unlock(&uart->port.lock); - tty_flip_buffer_push(&uart->port.state->port); - spin_lock(&uart->port.lock); - } while (!((status = UART_GET_STATUS(uart)) & RXEMPTY)); + spin_unlock(&port->lock); + tty_flip_buffer_push(&port->state->port); + spin_lock(&port->lock); + } while (!((status = UART_GET_STATUS(port)) & RXEMPTY)); } /* @@ -287,10 +280,10 @@ static void arc_serial_rx_chars(struct arc_uart_port *uart, unsigned int status) static irqreturn_t arc_serial_isr(int irq, void *dev_id) { - struct arc_uart_port *uart = dev_id; + struct uart_port *port = dev_id; unsigned int status; - status = UART_GET_STATUS(uart); + status = UART_GET_STATUS(port); /* * Single IRQ for both Rx (data available) Tx (room available) Interrupt @@ -300,9 +293,9 @@ static irqreturn_t arc_serial_isr(int irq, void *dev_id) if (status & RXIENB) { /* already in ISR, no need of xx_irqsave */ - spin_lock(&uart->port.lock); - arc_serial_rx_chars(uart, status); - spin_unlock(&uart->port.lock); + spin_lock(&port->lock); + arc_serial_rx_chars(port, status); + spin_unlock(&port->lock); } if ((status & TXIENB) && (status & TXEMPTY)) { @@ -310,14 +303,14 @@ static irqreturn_t arc_serial_isr(int irq, void *dev_id) /* Unconditionally disable further Tx-Interrupts. * will be enabled by tx_chars() if needed. */ - UART_TX_IRQ_DISABLE(uart); + UART_TX_IRQ_DISABLE(port); - spin_lock(&uart->port.lock); + spin_lock(&port->lock); - if (!uart_tx_stopped(&uart->port)) - arc_serial_tx_chars(uart); + if (!uart_tx_stopped(port)) + arc_serial_tx_chars(port); - spin_unlock(&uart->port.lock); + spin_unlock(&port->lock); } return IRQ_HANDLED; @@ -347,18 +340,15 @@ static void arc_serial_break_ctl(struct uart_port *port, int break_state) static int arc_serial_startup(struct uart_port *port) { - struct arc_uart_port *uart = to_arc_port(port); - /* Before we hook up the ISR, Disable all UART Interrupts */ - UART_ALL_IRQ_DISABLE(uart); + UART_ALL_IRQ_DISABLE(port); - if (request_irq(uart->port.irq, arc_serial_isr, 0, "arc uart rx-tx", - uart)) { - dev_warn(uart->port.dev, "Unable to attach ARC UART intr\n"); + if (request_irq(port->irq, arc_serial_isr, 0, "arc uart rx-tx", port)) { + dev_warn(port->dev, "Unable to attach ARC UART intr\n"); return -EBUSY; } - UART_RX_IRQ_ENABLE(uart); /* Only Rx IRQ enabled to begin with */ + UART_RX_IRQ_ENABLE(port); /* Only Rx IRQ enabled to begin with */ return 0; } @@ -366,8 +356,7 @@ static int arc_serial_startup(struct uart_port *port) /* This is not really needed */ static void arc_serial_shutdown(struct uart_port *port) { - struct arc_uart_port *uart = to_arc_port(port); - free_irq(uart->port.irq, uart); + free_irq(port->irq, port); } static void @@ -404,12 +393,12 @@ arc_serial_set_termios(struct uart_port *port, struct ktermios *new, spin_lock_irqsave(&port->lock, flags); - UART_ALL_IRQ_DISABLE(uart); + UART_ALL_IRQ_DISABLE(port); - UART_SET_BAUDL(uart, uartl); - UART_SET_BAUDH(uart, uarth); + UART_SET_BAUDL(port, uartl); + UART_SET_BAUDH(port, uarth); - UART_RX_IRQ_ENABLE(uart); + UART_RX_IRQ_ENABLE(port); /* * UART doesn't support Parity/Hardware Flow Control; @@ -432,9 +421,7 @@ arc_serial_set_termios(struct uart_port *port, struct ktermios *new, static const char *arc_serial_type(struct uart_port *port) { - struct arc_uart_port *uart = to_arc_port(port); - - return uart->port.type == PORT_ARC ? DRIVER_NAME : NULL; + return port->type == PORT_ARC ? DRIVER_NAME : NULL; } static void arc_serial_release_port(struct uart_port *port) @@ -463,35 +450,30 @@ arc_serial_verify_port(struct uart_port *port, struct serial_struct *ser) */ static void arc_serial_config_port(struct uart_port *port, int flags) { - struct arc_uart_port *uart = to_arc_port(port); - if (flags & UART_CONFIG_TYPE) - uart->port.type = PORT_ARC; + port->type = PORT_ARC; } #if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_ARC_CONSOLE) static void arc_serial_poll_putchar(struct uart_port *port, int chr) { - struct arc_uart_port *uart = to_arc_port(port); - - while (!(UART_GET_STATUS(uart) & TXEMPTY)) + while (!(UART_GET_STATUS(port) & TXEMPTY)) cpu_relax(); - UART_SET_DATA(uart, (unsigned char)chr); + UART_SET_DATA(port, (unsigned char)chr); } #endif #ifdef CONFIG_CONSOLE_POLL static int arc_serial_poll_getchar(struct uart_port *port) { - struct arc_uart_port *uart = to_arc_port(port); unsigned char chr; - while (!(UART_GET_STATUS(uart) & RXEMPTY)) + while (!(UART_GET_STATUS(port) & RXEMPTY)) cpu_relax(); - chr = UART_GET_DATA(uart); + chr = UART_GET_DATA(port); return chr; } #endif @@ -524,6 +506,7 @@ arc_uart_init_one(struct platform_device *pdev, int dev_id) struct resource *res, *res2; unsigned long *plat_data; struct arc_uart_port *uart = &arc_uart_ports[dev_id]; + struct uart_port *port = &uart->port; plat_data = dev_get_platdata(&pdev->dev); if (!plat_data) @@ -532,7 +515,7 @@ arc_uart_init_one(struct platform_device *pdev, int dev_id) uart->is_emulated = !!plat_data[0]; /* workaround ISS bug */ if (is_early_platform_device(pdev)) { - uart->port.uartclk = plat_data[1]; + port->uartclk = plat_data[1]; uart->baud = plat_data[2]; } else { struct device_node *np = pdev->dev.of_node; @@ -542,7 +525,7 @@ arc_uart_init_one(struct platform_device *pdev, int dev_id) dev_err(&pdev->dev, "clock-frequency property NOTset\n"); return -EINVAL; } - uart->port.uartclk = val; + port->uartclk = val; if (of_property_read_u32(np, "current-speed", &val)) { dev_err(&pdev->dev, "current-speed property NOT set\n"); @@ -559,26 +542,26 @@ arc_uart_init_one(struct platform_device *pdev, int dev_id) if (!res2) return -ENODEV; - uart->port.mapbase = res->start; - uart->port.membase = ioremap_nocache(res->start, resource_size(res)); - if (!uart->port.membase) + port->mapbase = res->start; + port->membase = ioremap_nocache(res->start, resource_size(res)); + if (!port->membase) /* No point of dev_err since UART itself is hosed here */ return -ENXIO; - uart->port.irq = res2->start; - uart->port.dev = &pdev->dev; - uart->port.iotype = UPIO_MEM; - uart->port.flags = UPF_BOOT_AUTOCONF; - uart->port.line = dev_id; - uart->port.ops = &arc_serial_pops; + port->irq = res2->start; + port->dev = &pdev->dev; + port->iotype = UPIO_MEM; + port->flags = UPF_BOOT_AUTOCONF; + port->line = dev_id; + port->ops = &arc_serial_pops; - uart->port.fifosize = ARC_UART_TX_FIFO_SIZE; + port->fifosize = ARC_UART_TX_FIFO_SIZE; /* * uart_insert_char( ) uses it in decideding whether to ignore a * char or not. Explicitly setting it here, removes the subtelty */ - uart->port.ignore_status_mask = 0; + port->ignore_status_mask = 0; return 0; }