From: Sean Wang Date: Sun, 2 Jun 2019 01:04:15 +0000 (+0800) Subject: dt-bindings: net: bluetooth: add clock property to UART-based device X-Git-Tag: Ubuntu-5.10.0-12.13~5002^2~51^2~18 X-Git-Url: https://git.proxmox.com/?a=commitdiff_plain;h=14e3ed84d77e78fbf386006d3e5a0c20150681f5;p=mirror_ubuntu-hirsute-kernel.git dt-bindings: net: bluetooth: add clock property to UART-based device Some board requires explicitily control external osscilator via GPIO. So, add a clock property for an external oscillator for the device. Signed-off-by: Sean Wang Signed-off-by: Marcel Holtmann --- diff --git a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt index 14f23b354a6d..112011c51d5e 100644 --- a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt +++ b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt @@ -73,6 +73,10 @@ Optional properties: - reset-gpios: GPIO used to reset the device whose initial state keeps low, if the GPIO is missing, then board-level design should be guaranteed. +- clocks: Should be the clock specifiers corresponding to the entry in + clock-names property. If the clock is missing, then board-level + design should be guaranteed. +- clock-names: Should contain "osc" entry for the external oscillator. - current-speed: Current baud rate of the device whose defaults to 921600 Example: