From: Arik Nemtsov Date: Sun, 14 Aug 2011 10:17:29 +0000 (+0300) Subject: wl12xx: AP-mode - configure HT rate support to the FW X-Git-Tag: Ubuntu-snapdragon-4.4.0-1050.54~16292^2~287^2^2~87^2~10 X-Git-Url: https://git.proxmox.com/?a=commitdiff_plain;h=1a8adb67f9c37cad9539dd9dcb289ce1411680fc;p=mirror_ubuntu-artful-kernel.git wl12xx: AP-mode - configure HT rate support to the FW Unconditionally configure HT rate support to the FW on all ACs when starting the AP. When 11n support is disabled by usermode (hostapd), each STA joining the AP will appear as a non-HT STA. This will stop us from accidentally transmitting using MCS rates. Signed-off-by: Arik Nemtsov Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho --- diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h index 76b5c6233da4..82f205c43342 100644 --- a/drivers/net/wireless/wl12xx/conf.h +++ b/drivers/net/wireless/wl12xx/conf.h @@ -441,6 +441,11 @@ struct conf_rx_settings { CONF_HW_BIT_RATE_36MBPS | CONF_HW_BIT_RATE_48MBPS | \ CONF_HW_BIT_RATE_54MBPS) +#define CONF_TX_MCS_RATES (CONF_HW_BIT_RATE_MCS_0 | \ + CONF_HW_BIT_RATE_MCS_1 | CONF_HW_BIT_RATE_MCS_2 | \ + CONF_HW_BIT_RATE_MCS_3 | CONF_HW_BIT_RATE_MCS_4 | \ + CONF_HW_BIT_RATE_MCS_5 | CONF_HW_BIT_RATE_MCS_6 | \ + CONF_HW_BIT_RATE_MCS_7) /* * Default rates for management traffic when operating in AP mode. This diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/wl12xx/init.c index a374c2112be3..b13bebea95e0 100644 --- a/drivers/net/wireless/wl12xx/init.c +++ b/drivers/net/wireless/wl12xx/init.c @@ -515,6 +515,9 @@ int wl1271_init_ap_rates(struct wl1271 *wl) else supported_rates = CONF_TX_AP_ENABLED_RATES; + /* unconditionally enable HT rates */ + supported_rates |= CONF_TX_MCS_RATES; + /* configure unicast TX rate classes */ for (i = 0; i < wl->conf.tx.ac_conf_count; i++) { rc.enabled_rates = supported_rates;