From: Yuval Mintz Date: Thu, 26 May 2016 08:01:22 +0000 (+0300) Subject: qed: Add missing 100g init mode X-Git-Tag: Ubuntu-4.8.0-22.24~1127^2~23^2~2 X-Git-Url: https://git.proxmox.com/?a=commitdiff_plain;h=1af9dcf7f90e6b75b7c42eaaf19cdd5da1354784;p=mirror_ubuntu-zesty-kernel.git qed: Add missing 100g init mode Some of the HW configurations are currently missing for 100g devices. This can cause various classification issues, as well as prevent device from fully reaching line-rate. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c index 920eadd6417c..2a7c8755eda0 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -588,7 +588,14 @@ static void qed_calc_hw_mode(struct qed_hwfn *p_hwfn) hw_mode |= 1 << MODE_ASIC; + if (p_hwfn->cdev->num_hwfns > 1) + hw_mode |= 1 << MODE_100G; + p_hwfn->hw_info.hw_mode = hw_mode; + + DP_VERBOSE(p_hwfn, (NETIF_MSG_PROBE | NETIF_MSG_IFUP), + "Configuring function for hw_mode: 0x%08x\n", + p_hwfn->hw_info.hw_mode); } /* Init run time data for all PFs on an engine. */