From: Stefan Richter Date: Mon, 23 Apr 2007 19:28:47 +0000 (+0200) Subject: ieee1394: eth1394: send async streams at S100 on 1394b buses X-Git-Tag: Ubuntu-5.10.0-12.13~48956^2~5 X-Git-Url: https://git.proxmox.com/?a=commitdiff_plain;h=21b2c5647b057624628888857f0e2246538a80b1;p=mirror_ubuntu-hirsute-kernel.git ieee1394: eth1394: send async streams at S100 on 1394b buses eth1394 did not work on buses consisting of S100B...S400B hardware because it attempted to send GASP packets at S800. Signed-off-by: Stefan Richter --- diff --git a/drivers/ieee1394/eth1394.c b/drivers/ieee1394/eth1394.c index bd67c862099e..2296d43a2414 100644 --- a/drivers/ieee1394/eth1394.c +++ b/drivers/ieee1394/eth1394.c @@ -475,9 +475,18 @@ static void ether1394_reset_priv(struct net_device *dev, int set_mtu) priv->bc_maxpayload = 512; /* Determine speed limit */ - for (i = 0; i < host->node_count; i++) + /* FIXME: This is broken for nodes with link speed < PHY speed, + * and it is suboptimal for S200B...S800B hardware. + * The result of nodemgr's speed probe should be used somehow. */ + for (i = 0; i < host->node_count; i++) { + /* take care of S100B...S400B PHY ports */ + if (host->speed[i] == SELFID_SPEED_UNKNOWN) { + max_speed = IEEE1394_SPEED_100; + break; + } if (max_speed > host->speed[i]) max_speed = host->speed[i]; + } priv->bc_sspd = max_speed; if (set_mtu) { @@ -1420,11 +1429,10 @@ static void ether1394_prep_gasp_packet(struct hpsb_packet *p, p->data[1] = cpu_to_be32(ETHER1394_GASP_SPECIFIER_ID_LO << 24 | ETHER1394_GASP_VERSION); - /* Setting the node id to ALL_NODES (not LOCAL_BUS | ALL_NODES) - * prevents hpsb_send_packet() from setting the speed to an arbitrary - * value based on packet->node_id if packet->node_id is not set. */ - p->node_id = ALL_NODES; p->speed_code = priv->bc_sspd; + + /* prevent hpsb_send_packet() from overriding our speed code */ + p->node_id = LOCAL_BUS | ALL_NODES; } static void ether1394_free_packet(struct hpsb_packet *packet)