From: Jason Wang Date: Thu, 22 Mar 2012 10:01:42 +0000 (+0800) Subject: e1000: introduce bits of PHY control register X-Git-Tag: v1.1-rc0~35^2~6 X-Git-Url: https://git.proxmox.com/?a=commitdiff_plain;h=2e54cc21ad60219229df569a857a453285795565;p=qemu.git e1000: introduce bits of PHY control register This would be used be following patches. Signed-off-by: Jason Wang Signed-off-by: Michael S. Tsirkin --- diff --git a/hw/e1000_hw.h b/hw/e1000_hw.h index 9e29af8c8..c9cb79e64 100644 --- a/hw/e1000_hw.h +++ b/hw/e1000_hw.h @@ -349,6 +349,18 @@ #define M88E1000_PHY_VCO_REG_BIT8 0x100 /* Bits 8 & 11 are adjusted for */ #define M88E1000_PHY_VCO_REG_BIT11 0x800 /* improved BER performance */ +/* PHY Control Register */ +#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */ +#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */ +#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ +#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ +#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */ +#define MII_CR_POWER_DOWN 0x0800 /* Power down */ +#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ +#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */ +#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ +#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ + /* PHY Status Register */ #define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */ #define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */