From: Dan Williams Date: Wed, 23 Feb 2011 08:09:01 +0000 (-0800) Subject: isci: clean up remaining silicon revision ifdefs in phy init X-Git-Tag: v5.15~24739^2~1^2~246 X-Git-Url: https://git.proxmox.com/?a=commitdiff_plain;h=3c06c2839dac6db56a1e6bd11924db38eddfb2ed;p=mirror_ubuntu-kernels.git isci: clean up remaining silicon revision ifdefs in phy init Use the dynamic revision detection code in scic_sds_phy_link_layer_initialization() and apply some coding style fixups (long deref chains). The compile time max link rate setting is removed in favor of honoring the user-parameter max. Reported-by: Krzysztof Wierzbicki Signed-off-by: Dan Williams --- diff --git a/drivers/scsi/isci/core/scic_config_parameters.h b/drivers/scsi/isci/core/scic_config_parameters.h index 8bd85605130c..485fefc08883 100644 --- a/drivers/scsi/isci/core/scic_config_parameters.h +++ b/drivers/scsi/isci/core/scic_config_parameters.h @@ -114,7 +114,7 @@ struct scic_sds_controller; * */ struct scic_sds_user_parameters { - struct { + struct sci_phy_user_params { /** * This field specifies the NOTIFY (ENABLE SPIN UP) primitive * insertion frequency for this phy index. @@ -250,7 +250,7 @@ struct scic_sds_oem_parameters { } ports[SCI_MAX_PORTS]; - struct { + struct sci_phy_oem_params { /** * This field specifies the SAS address to be transmitted on * for this phy index. diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index d9fca9976889..e8d09fd935ec 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -584,21 +584,6 @@ void scic_sds_controller_enable_port_task_scheduler( */ #define AFE_REGISTER_WRITE_DELAY 10 -static bool is_a0(void) -{ - return isci_si_rev == ISCI_SI_REVA0; -} - -static bool is_a2(void) -{ - return isci_si_rev == ISCI_SI_REVA2; -} - -static bool is_b0(void) -{ - return isci_si_rev > ISCI_SI_REVA2; -} - /* Initialize the AFE for this phy index. We need to read the AFE setup from * the OEM parameters none */ diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index ecd7cc698ae6..e8d5be73cd0b 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -111,62 +111,55 @@ static enum sci_status scic_sds_phy_transport_layer_initialization( /** * This method will initialize the phy link layer registers - * @this_phy: + * @sci_phy: * @link_layer_registers: * * enum sci_status */ -static enum sci_status scic_sds_phy_link_layer_initialization( - struct scic_sds_phy *this_phy, - struct scu_link_layer_registers __iomem *link_layer_registers) +static enum sci_status +scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, + struct scu_link_layer_registers __iomem *link_layer_registers) { + struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller; + int phy_idx = sci_phy->phy_index; + struct sci_phy_user_params *phy_user = &scic->user_parameters.sds1.phys[phy_idx]; + struct sci_phy_oem_params *phy_oem = &scic->oem_parameters.sds1.phys[phy_idx]; u32 phy_configuration; struct sas_capabilities phy_capabilities; u32 parity_check = 0; u32 parity_count = 0; - u32 link_layer_control; + u32 llctl, link_rate; u32 clksm_value = 0; - this_phy->link_layer_registers = link_layer_registers; + sci_phy->link_layer_registers = link_layer_registers; /* Set our IDENTIFY frame data */ #define SCI_END_DEVICE 0x01 - SCU_SAS_TIID_WRITE( - this_phy, - (SCU_SAS_TIID_GEN_BIT(SMP_INITIATOR) - | SCU_SAS_TIID_GEN_BIT(SSP_INITIATOR) - | SCU_SAS_TIID_GEN_BIT(STP_INITIATOR) - | SCU_SAS_TIID_GEN_BIT(DA_SATA_HOST) - | SCU_SAS_TIID_GEN_VAL(DEVICE_TYPE, SCI_END_DEVICE)) - ); + SCU_SAS_TIID_WRITE(sci_phy, (SCU_SAS_TIID_GEN_BIT(SMP_INITIATOR) | + SCU_SAS_TIID_GEN_BIT(SSP_INITIATOR) | + SCU_SAS_TIID_GEN_BIT(STP_INITIATOR) | + SCU_SAS_TIID_GEN_BIT(DA_SATA_HOST) | + SCU_SAS_TIID_GEN_VAL(DEVICE_TYPE, SCI_END_DEVICE))); /* Write the device SAS Address */ - SCU_SAS_TIDNH_WRITE(this_phy, 0xFEDCBA98); - SCU_SAS_TIDNL_WRITE(this_phy, this_phy->phy_index); + SCU_SAS_TIDNH_WRITE(sci_phy, 0xFEDCBA98); + SCU_SAS_TIDNL_WRITE(sci_phy, phy_idx); /* Write the source SAS Address */ - SCU_SAS_TISSAH_WRITE( - this_phy, - this_phy->owning_port->owning_controller->oem_parameters.sds1.phys[ - this_phy->phy_index].sas_address.high - ); - SCU_SAS_TISSAL_WRITE( - this_phy, - this_phy->owning_port->owning_controller->oem_parameters.sds1.phys[ - this_phy->phy_index].sas_address.low - ); + SCU_SAS_TISSAH_WRITE(sci_phy, phy_oem->sas_address.high); + SCU_SAS_TISSAL_WRITE(sci_phy, phy_oem->sas_address.low); /* Clear and Set the PHY Identifier */ - SCU_SAS_TIPID_WRITE(this_phy, 0x00000000); - SCU_SAS_TIPID_WRITE(this_phy, SCU_SAS_TIPID_GEN_VALUE(ID, this_phy->phy_index)); + SCU_SAS_TIPID_WRITE(sci_phy, 0x00000000); + SCU_SAS_TIPID_WRITE(sci_phy, SCU_SAS_TIPID_GEN_VALUE(ID, phy_idx)); /* Change the initial state of the phy configuration register */ - phy_configuration = SCU_SAS_PCFG_READ(this_phy); + phy_configuration = SCU_SAS_PCFG_READ(sci_phy); /* Hold OOB state machine in reset */ phy_configuration |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET); - SCU_SAS_PCFG_WRITE(this_phy, phy_configuration); + SCU_SAS_PCFG_WRITE(sci_phy, phy_configuration); /* Configure the SNW capabilities */ phy_capabilities.u.all = 0; @@ -174,8 +167,7 @@ static enum sci_status scic_sds_phy_link_layer_initialization( phy_capabilities.u.bits.gen3_without_ssc_supported = 1; phy_capabilities.u.bits.gen2_without_ssc_supported = 1; phy_capabilities.u.bits.gen1_without_ssc_supported = 1; - if (this_phy->owning_port->owning_controller->oem_parameters.sds1. - controller.do_enable_ssc == true) { + if (scic->oem_parameters.sds1.controller.do_enable_ssc == true) { phy_capabilities.u.bits.gen3_with_ssc_supported = 1; phy_capabilities.u.bits.gen2_with_ssc_supported = 1; phy_capabilities.u.bits.gen1_with_ssc_supported = 1; @@ -197,93 +189,66 @@ static enum sci_status scic_sds_phy_link_layer_initialization( if ((parity_count % 2) != 0) phy_capabilities.u.bits.parity = 1; - SCU_SAS_PHYCAP_WRITE(this_phy, phy_capabilities.u.all); + SCU_SAS_PHYCAP_WRITE(sci_phy, phy_capabilities.u.all); - /* Set the enable spinup period but disable the ability to send notify enable spinup */ - SCU_SAS_ENSPINUP_WRITE(this_phy, SCU_ENSPINUP_GEN_VAL(COUNT, - this_phy->owning_port->owning_controller->user_parameters.sds1. - phys[this_phy->phy_index].notify_enable_spin_up_insertion_frequency)); + /* Set the enable spinup period but disable the ability to send + * notify enable spinup + */ + SCU_SAS_ENSPINUP_WRITE(sci_phy, SCU_ENSPINUP_GEN_VAL(COUNT, + phy_user->notify_enable_spin_up_insertion_frequency)); - /* Write the ALIGN Insertion Ferequency for connected phy and inpendent of connected state */ + /* Write the ALIGN Insertion Ferequency for connected phy and + * inpendent of connected state + */ clksm_value = SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(CONNECTED, - this_phy->owning_port->owning_controller->user_parameters.sds1. - phys[this_phy->phy_index].in_connection_align_insertion_frequency); + phy_user->in_connection_align_insertion_frequency); clksm_value |= SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(GENERAL, - this_phy->owning_port->owning_controller->user_parameters.sds1. - phys[this_phy->phy_index].align_insertion_frequency); - - SCU_SAS_CLKSM_WRITE(this_phy, clksm_value); - -#if defined(CONFIG_PBG_HBA_A0) || defined(CONFIG_PBG_HBA_A2) || defined(CONFIG_PBG_HBA_BETA) - /* / @todo Provide a way to write this register correctly */ - scu_link_layer_register_write(this_phy, afe_lookup_table_control, 0x02108421); -#else - /* / @todo Provide a way to write this register correctly */ - scu_link_layer_register_write(this_phy, afe_lookup_table_control, 0x0e739ce7); -#endif - - link_layer_control = SCU_SAS_LLCTL_GEN_VAL( - NO_OUTBOUND_TASK_TIMEOUT, - (u8)this_phy->owning_port->owning_controller-> - user_parameters.sds1.no_outbound_task_timeout - ); + phy_user->align_insertion_frequency); -/* #define COMPILED_MAX_LINK_RATE SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1 */ -/* #define COMPILED_MAX_LINK_RATE SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2 */ -#define COMPILED_MAX_LINK_RATE SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN3 + SCU_SAS_CLKSM_WRITE(sci_phy, clksm_value); - if (this_phy->owning_port->owning_controller->user_parameters.sds1. - phys[this_phy->phy_index].max_speed_generation == SCIC_SDS_PARM_GEN3_SPEED) { - link_layer_control |= SCU_SAS_LLCTL_GEN_VAL( - MAX_LINK_RATE, COMPILED_MAX_LINK_RATE - ); - } else if (this_phy->owning_port->owning_controller->user_parameters.sds1. - phys[this_phy->phy_index].max_speed_generation == SCIC_SDS_PARM_GEN2_SPEED) { - link_layer_control |= SCU_SAS_LLCTL_GEN_VAL( - MAX_LINK_RATE, - min( - SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2, - COMPILED_MAX_LINK_RATE) - ); - } else { - link_layer_control |= SCU_SAS_LLCTL_GEN_VAL( - MAX_LINK_RATE, - min( - SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1, - COMPILED_MAX_LINK_RATE) - ); - } + /* @todo Provide a way to write this register correctly */ + scu_link_layer_register_write(sci_phy, afe_lookup_table_control, 0x02108421); - scu_link_layer_register_write( - this_phy, link_layer_control, link_layer_control - ); + llctl = SCU_SAS_LLCTL_GEN_VAL(NO_OUTBOUND_TASK_TIMEOUT, + (u8)scic->user_parameters.sds1.no_outbound_task_timeout); - /* - * Program the max ARB time for the PHY to 700us so we inter-operate with - * the PMC expander which shuts down PHYs if the expander PHY generates too - * many breaks. This time value will guarantee that the initiator PHY will - * generate the break. */ -#if defined(CONFIG_PBG_HBA_A0) || defined(CONFIG_PBG_HBA_A2) - scu_link_layer_register_write( - this_phy, - maximum_arbitration_wait_timer_timeout, - SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME - ); -#endif /* defined(CONFIG_PBG_HBA_A0) || defined(CONFIG_PBG_HBA_A2) */ + switch(phy_user->max_speed_generation) { + case SCIC_SDS_PARM_GEN3_SPEED: + link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN3; + break; + case SCIC_SDS_PARM_GEN2_SPEED: + link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2; + break; + default: + link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1; + break; + } + llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate); + + scu_link_layer_register_write(sci_phy, link_layer_control, llctl); + + if (is_a0() || is_a2()) { + /* Program the max ARB time for the PHY to 700us so we inter-operate with + * the PMC expander which shuts down PHYs if the expander PHY generates too + * many breaks. This time value will guarantee that the initiator PHY will + * generate the break. + */ + scu_link_layer_register_write(sci_phy, + maximum_arbitration_wait_timer_timeout, + SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME); + } /* * Set the link layer hang detection to 500ms (0x1F4) from its default * value of 128ms. Max value is 511 ms. */ - scu_link_layer_register_write( - this_phy, link_layer_hang_detection_timeout, 0x1F4 - ); + scu_link_layer_register_write(sci_phy, link_layer_hang_detection_timeout, + 0x1F4); /* We can exit the initial state to the stopped state */ - sci_base_state_machine_change_state( - scic_sds_phy_get_base_state_machine(this_phy), - SCI_BASE_PHY_STATE_STOPPED - ); + sci_base_state_machine_change_state(scic_sds_phy_get_base_state_machine(sci_phy), + SCI_BASE_PHY_STATE_STOPPED); return SCI_SUCCESS; } diff --git a/drivers/scsi/isci/sci_environment.h b/drivers/scsi/isci/sci_environment.h index e1020ee6c38e..8d57f9552e28 100644 --- a/drivers/scsi/isci/sci_environment.h +++ b/drivers/scsi/isci/sci_environment.h @@ -108,5 +108,19 @@ enum { extern int isci_si_rev; +static inline bool is_a0(void) +{ + return isci_si_rev == ISCI_SI_REVA0; +} + +static inline bool is_a2(void) +{ + return isci_si_rev == ISCI_SI_REVA2; +} + +static inline bool is_b0(void) +{ + return isci_si_rev > ISCI_SI_REVA2; +} #endif