From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Tue, 28 May 2019 09:34:42 +0000 (+0100)
Subject: net: phy: marvell10g: report if the PHY fails to boot firmware
X-Git-Tag: Ubuntu-5.13.0-19.19~8431^2~14
X-Git-Url: https://git.proxmox.com/?a=commitdiff_plain;h=3d3ced2ec5d71b99d72ae6910fbdf890bc2eccf0;p=mirror_ubuntu-jammy-kernel.git

net: phy: marvell10g: report if the PHY fails to boot firmware

Some boards do not have the PHY firmware programmed in the 3310's flash,
which leads to the PHY not working as expected.  Warn the user when the
PHY fails to boot the firmware and refuse to initialise.

Fixes: 20b2af32ff3f ("net: phy: add Marvell Alaska X 88X3310 10Gigabit PHY support")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 238a20e13d6a..3b99882692e3 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -31,6 +31,9 @@
 #define MV_PHY_ALASKA_NBT_QUIRK_REV	(MARVELL_PHY_ID_88X3310 | 0xa)
 
 enum {
+	MV_PMA_BOOT		= 0xc050,
+	MV_PMA_BOOT_FATAL	= BIT(0),
+
 	MV_PCS_BASE_T		= 0x0000,
 	MV_PCS_BASE_R		= 0x1000,
 	MV_PCS_1000BASEX	= 0x2000,
@@ -213,6 +216,16 @@ static int mv3310_probe(struct phy_device *phydev)
 	    (phydev->c45_ids.devices_in_package & mmd_mask) != mmd_mask)
 		return -ENODEV;
 
+	ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_BOOT);
+	if (ret < 0)
+		return ret;
+
+	if (ret & MV_PMA_BOOT_FATAL) {
+		dev_warn(&phydev->mdio.dev,
+			 "PHY failed to boot firmware, status=%04x\n", ret);
+		return -ENODEV;
+	}
+
 	priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;