From: John Stultz Date: Tue, 17 Jan 2017 00:52:51 +0000 (-0800) Subject: drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID X-Git-Tag: Ubuntu-5.0.0-8.9~5416^2~38^2~3 X-Git-Url: https://git.proxmox.com/?a=commitdiff_plain;h=4226d9b127cf4758ba0e07931b3f0d59f1b1a50c;p=mirror_ubuntu-disco-kernel.git drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID Thus this patch changes the EDID probing logic so that we re-use the __adv7511_power_on/off() calls instead of duplciating logic. This does change behavior slightly as it adds the HPD signal pulse to the EDID probe path, but Archit has had a patch to add HPD signal pulse to the EDID probe path before, so this should address the cases where that helped. Another difference is that regcache_mark_dirty() is also called in the power off path once EDID is probed. Cc: David Airlie Cc: Archit Taneja Cc: Wolfram Sang Cc: Lars-Peter Clausen Cc: Laurent Pinchart Cc: dri-devel@lists.freedesktop.org Reviewed-by: Laurent Pinchart Tested-by: Laurent Pinchart Signed-off-by: John Stultz Signed-off-by: Archit Taneja Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-6-git-send-email-john.stultz@linaro.org --- diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c index 545ceff5890f..17b9e98b151b 100644 --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c @@ -573,24 +573,13 @@ static int adv7511_get_modes(struct adv7511 *adv7511, unsigned int count; /* Reading the EDID only works if the device is powered */ - if (!adv7511->powered) { - regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER, - ADV7511_POWER_POWER_DOWN, 0); - if (adv7511->i2c_main->irq) { - regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(0), - ADV7511_INT0_EDID_READY); - regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(1), - ADV7511_INT1_DDC_ERROR); - } - adv7511->current_edid_segment = -1; - } + if (!adv7511->powered) + __adv7511_power_on(adv7511); edid = drm_do_get_edid(connector, adv7511_get_edid_block, adv7511); if (!adv7511->powered) - regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER, - ADV7511_POWER_POWER_DOWN, - ADV7511_POWER_POWER_DOWN); + __adv7511_power_off(adv7511); kfree(adv7511->edid); adv7511->edid = edid;