From: Dinh Nguyen Date: Mon, 16 Sep 2013 20:57:48 +0000 (-0500) Subject: dts: Fix misspelling of Synopsys X-Git-Tag: Ubuntu-5.2.0-15.16~14813^2 X-Git-Url: https://git.proxmox.com/?a=commitdiff_plain;h=53126a2f679382f3eac370a012290f19c672f088;p=mirror_ubuntu-eoan-kernel.git dts: Fix misspelling of Synopsys s/Synopsis/Synopsys s/synopsis/synopsys Signed-off-by: Dinh Nguyen Cc: Pavel Machek CC: Arnd Bergmann CC: Olof Johansson Cc: Rob Herring Cc: Pawel Moll Cc: Mark Rutland Cc: Stephen Warren Cc: Ian Campbell Cc: Chris Ball Cc: Jaehoon Chung Cc: Seungwon Jeon Cc: Tomasz Figa Cc: devicetree@vger.kernel.org Cc: linux-mmc@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org Acked-by: Olof Johansson Signed-off-by: Rob Herring --- diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt index 6d1c0988cfc7..c67b975c8906 100644 --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt @@ -1,11 +1,11 @@ -* Samsung Exynos specific extensions to the Synopsis Designware Mobile +* Samsung Exynos specific extensions to the Synopsys Designware Mobile Storage Host Controller -The Synopsis designware mobile storage host controller is used to interface +The Synopsys designware mobile storage host controller is used to interface a SoC with storage medium such as eMMC or SD/MMC cards. This file documents -differences between the core Synopsis dw mshc controller properties described -by synopsis-dw-mshc.txt and the properties used by the Samsung Exynos specific -extensions to the Synopsis Designware Mobile Storage Host Controller. +differences between the core Synopsys dw mshc controller properties described +by synopsys-dw-mshc.txt and the properties used by the Samsung Exynos specific +extensions to the Synopsys Designware Mobile Storage Host Controller. Required Properties: diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt index 8a3d91d47b6a..c559f3f36309 100644 --- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt @@ -1,11 +1,11 @@ -* Rockchip specific extensions to the Synopsis Designware Mobile +* Rockchip specific extensions to the Synopsys Designware Mobile Storage Host Controller -The Synopsis designware mobile storage host controller is used to interface +The Synopsys designware mobile storage host controller is used to interface a SoC with storage medium such as eMMC or SD/MMC cards. This file documents -differences between the core Synopsis dw mshc controller properties described -by synopsis-dw-mshc.txt and the properties used by the Rockchip specific -extensions to the Synopsis Designware Mobile Storage Host Controller. +differences between the core Synopsys dw mshc controller properties described +by synopsys-dw-mshc.txt and the properties used by the Rockchip specific +extensions to the Synopsys Designware Mobile Storage Host Controller. Required Properties: diff --git a/Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt deleted file mode 100644 index cdcebea9c6f5..000000000000 --- a/Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt +++ /dev/null @@ -1,107 +0,0 @@ -* Synopsis Designware Mobile Storage Host Controller - -The Synopsis designware mobile storage host controller is used to interface -a SoC with storage medium such as eMMC or SD/MMC cards. This file documents -differences between the core mmc properties described by mmc.txt and the -properties used by the Synopsis Designware Mobile Storage Host Controller. - -Required Properties: - -* compatible: should be - - snps,dw-mshc: for controllers compliant with synopsis dw-mshc. -* #address-cells: should be 1. -* #size-cells: should be 0. - -# Slots: The slot specific information are contained within child-nodes with - each child-node representing a supported slot. There should be atleast one - child node representing a card slot. The name of the child node representing - the slot is recommended to be slot@n where n is the unique number of the slot - connnected to the controller. The following are optional properties which - can be included in the slot child node. - - * reg: specifies the physical slot number. The valid values of this - property is 0 to (num-slots -1), where num-slots is the value - specified by the num-slots property. - - * bus-width: as documented in mmc core bindings. - - * wp-gpios: specifies the write protect gpio line. The format of the - gpio specifier depends on the gpio controller. If a GPIO is not used - for write-protect, this property is optional. - - * disable-wp: If the wp-gpios property isn't present then (by default) - we'd assume that the write protect is hooked up directly to the - controller's special purpose write protect line (accessible via - the WRTPRT register). However, it's possible that we simply don't - want write protect. In that case specify 'disable-wp'. - NOTE: This property is not required for slots known to always - connect to eMMC or SDIO cards. - -Optional properties: - -* clocks: from common clock binding: handle to biu and ciu clocks for the - bus interface unit clock and the card interface unit clock. - -* clock-names: from common clock binding: Shall be "biu" and "ciu". - If the biu clock is missing we'll simply skip enabling it. If the - ciu clock is missing we'll just assume that the clock is running at - clock-frequency. It is an error to omit both the ciu clock and the - clock-frequency. - -* clock-frequency: should be the frequency (in Hz) of the ciu clock. If this - is specified and the ciu clock is specified then we'll try to set the ciu - clock to this at probe time. - -* num-slots: specifies the number of slots supported by the controller. - The number of physical slots actually used could be equal or less than the - value specified by num-slots. If this property is not specified, the value - of num-slot property is assumed to be 1. - -* fifo-depth: The maximum size of the tx/rx fifo's. If this property is not - specified, the default value of the fifo size is determined from the - controller registers. - -* card-detect-delay: Delay in milli-seconds before detecting card after card - insert event. The default value is 0. - -* supports-highspeed: Enables support for high speed cards (up to 50MHz) - -* broken-cd: as documented in mmc core bindings. - -* vmmc-supply: The phandle to the regulator to use for vmmc. If this is - specified we'll defer probe until we can find this regulator. - -Aliases: - -- All the MSHC controller nodes should be represented in the aliases node using - the following format 'mshc{n}' where n is a unique number for the alias. - -Example: - -The MSHC controller node can be split into two portions, SoC specific and -board specific portions as listed below. - - dwmmc0@12200000 { - compatible = "snps,dw-mshc"; - clocks = <&clock 351>, <&clock 132>; - clock-names = "biu", "ciu"; - reg = <0x12200000 0x1000>; - interrupts = <0 75 0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - dwmmc0@12200000 { - clock-frequency = <400000000>; - num-slots = <1>; - supports-highspeed; - broken-cd; - fifo-depth = <0x80>; - card-detect-delay = <200>; - vmmc-supply = <&buck8>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; - }; diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt new file mode 100644 index 000000000000..066a78b034ca --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt @@ -0,0 +1,107 @@ +* Synopsys Designware Mobile Storage Host Controller + +The Synopsys designware mobile storage host controller is used to interface +a SoC with storage medium such as eMMC or SD/MMC cards. This file documents +differences between the core mmc properties described by mmc.txt and the +properties used by the Synopsys Designware Mobile Storage Host Controller. + +Required Properties: + +* compatible: should be + - snps,dw-mshc: for controllers compliant with synopsys dw-mshc. +* #address-cells: should be 1. +* #size-cells: should be 0. + +# Slots: The slot specific information are contained within child-nodes with + each child-node representing a supported slot. There should be atleast one + child node representing a card slot. The name of the child node representing + the slot is recommended to be slot@n where n is the unique number of the slot + connnected to the controller. The following are optional properties which + can be included in the slot child node. + + * reg: specifies the physical slot number. The valid values of this + property is 0 to (num-slots -1), where num-slots is the value + specified by the num-slots property. + + * bus-width: as documented in mmc core bindings. + + * wp-gpios: specifies the write protect gpio line. The format of the + gpio specifier depends on the gpio controller. If a GPIO is not used + for write-protect, this property is optional. + + * disable-wp: If the wp-gpios property isn't present then (by default) + we'd assume that the write protect is hooked up directly to the + controller's special purpose write protect line (accessible via + the WRTPRT register). However, it's possible that we simply don't + want write protect. In that case specify 'disable-wp'. + NOTE: This property is not required for slots known to always + connect to eMMC or SDIO cards. + +Optional properties: + +* clocks: from common clock binding: handle to biu and ciu clocks for the + bus interface unit clock and the card interface unit clock. + +* clock-names: from common clock binding: Shall be "biu" and "ciu". + If the biu clock is missing we'll simply skip enabling it. If the + ciu clock is missing we'll just assume that the clock is running at + clock-frequency. It is an error to omit both the ciu clock and the + clock-frequency. + +* clock-frequency: should be the frequency (in Hz) of the ciu clock. If this + is specified and the ciu clock is specified then we'll try to set the ciu + clock to this at probe time. + +* num-slots: specifies the number of slots supported by the controller. + The number of physical slots actually used could be equal or less than the + value specified by num-slots. If this property is not specified, the value + of num-slot property is assumed to be 1. + +* fifo-depth: The maximum size of the tx/rx fifo's. If this property is not + specified, the default value of the fifo size is determined from the + controller registers. + +* card-detect-delay: Delay in milli-seconds before detecting card after card + insert event. The default value is 0. + +* supports-highspeed: Enables support for high speed cards (up to 50MHz) + +* broken-cd: as documented in mmc core bindings. + +* vmmc-supply: The phandle to the regulator to use for vmmc. If this is + specified we'll defer probe until we can find this regulator. + +Aliases: + +- All the MSHC controller nodes should be represented in the aliases node using + the following format 'mshc{n}' where n is a unique number for the alias. + +Example: + +The MSHC controller node can be split into two portions, SoC specific and +board specific portions as listed below. + + dwmmc0@12200000 { + compatible = "snps,dw-mshc"; + clocks = <&clock 351>, <&clock 132>; + clock-names = "biu", "ciu"; + reg = <0x12200000 0x1000>; + interrupts = <0 75 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + dwmmc0@12200000 { + clock-frequency = <400000000>; + num-slots = <1>; + supports-highspeed; + broken-cd; + fifo-depth = <0x80>; + card-detect-delay = <200>; + vmmc-supply = <&buck8>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt index eabcb4b5db6e..e216af356847 100644 --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt @@ -1,4 +1,4 @@ -* Synopsis Designware PCIe interface +* Synopsys Designware PCIe interface Required properties: - compatible: should contain "snps,dw-pcie" to identify the