From: Sebastian Reichel <sebastian.reichel@collabora.com>
Date: Wed, 5 Aug 2020 13:58:17 +0000 (+0200)
Subject: ARM: dts: imx6q-bx50v3: Add IRQ support for internal switch
X-Git-Tag: Ubuntu-5.13.0-19.19~4749^2~28^2~21
X-Git-Url: https://git.proxmox.com/?a=commitdiff_plain;h=675abeb9fc0e24a25eb5f95a948e3738aef64875;p=mirror_ubuntu-jammy-kernel.git

ARM: dts: imx6q-bx50v3: Add IRQ support for internal switch

This adds missing interrupt support for the internal Marvell
switch, so that the kernel does not have to keep polling the
PHYs on the bit-banged MDIO bus all the time.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---

diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
index 1938b04199c4..1fb67cd2b2a1 100644
--- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi
+++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
@@ -102,10 +102,15 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		switch@0 {
+		switch: switch@0 {
 			compatible = "marvell,mv88e6085"; /* 88e6240*/
 			reg = <0>;
 
+			interrupt-parent = <&gpio2>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
 			switch_ports: ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -117,22 +122,32 @@
 
 				switchphy0: switchphy@0 {
 					reg = <0>;
+					interrupt-parent = <&switch>;
+					interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
 				switchphy1: switchphy@1 {
 					reg = <1>;
+					interrupt-parent = <&switch>;
+					interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
 				switchphy2: switchphy@2 {
 					reg = <2>;
+					interrupt-parent = <&switch>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
 				switchphy3: switchphy@3 {
 					reg = <3>;
+					interrupt-parent = <&switch>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
 				switchphy4: switchphy@4 {
 					reg = <4>;
+					interrupt-parent = <&switch>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
 				};
 			};
 		};