From: Martyn Welch Date: Mon, 10 Nov 2008 12:31:33 +0000 (+0000) Subject: [WATCHDOG] Enable watchdog timer on GE Fanuc's SBC610 X-Git-Tag: Ubuntu-5.2.0-15.16~31154^2~1 X-Git-Url: https://git.proxmox.com/?a=commitdiff_plain;h=6ec9eae67a82a38865af20580e5e0ccd012aca4b;p=mirror_ubuntu-eoan-kernel.git [WATCHDOG] Enable watchdog timer on GE Fanuc's SBC610 Support for the FPGA based watchdog timer on GE Fanuc's SBC610. This patch enables one of the watchdog timers found on the SBC610. There are two identical watchdog timers at different offsets in the above mentioned boards, however the current driver is only capable of supporting one of them. The watchdog timers are also capable of generating interrupts at a user-configurable threshold, though support for this operation is currently not supported by the driver. Signed-off-by: Martyn Welch Signed-off-by: Wim Van Sebroeck --- diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts index 9708b3423bbd..e78c355c7bac 100644 --- a/arch/powerpc/boot/dts/gef_sbc610.dts +++ b/arch/powerpc/boot/dts/gef_sbc610.dts @@ -88,6 +88,21 @@ compatible = "gef,fpga-regs"; reg = <0x4 0x0 0x40>; }; + + wdt@4,2000 { + compatible = "gef,fpga-wdt"; + reg = <0x4 0x2000 0x8>; + interrupts = <0x1a 0x4>; + interrupt-parent = <&gef_pic>; + }; + /* Second watchdog available, driver currently supports one. + wdt@4,2010 { + compatible = "gef,fpga-wdt"; + reg = <0x4 0x2010 0x8>; + interrupts = <0x1b 0x4>; + interrupt-parent = <&gef_pic>; + }; + */ gef_pic: pic@4,4000 { #interrupt-cells = <1>; interrupt-controller; diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig index cd1ffa449327..391874c7b436 100644 --- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig @@ -1164,6 +1164,7 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_8xxx_WDT is not set +CONFIG_GEF_WDT=y # # PCI-based Watchdog Cards