From: Ben Skeggs Date: Sun, 22 Nov 2015 19:24:32 +0000 (+1000) Subject: drm/nouveau/gr/gf100-: split out per-gpc address calculation macro X-Git-Tag: v4.13~4056^2^2~5 X-Git-Url: https://git.proxmox.com/?a=commitdiff_plain;h=7028156a91326fda29cf972f0d148badbf5ae078;p=mirror_ubuntu-bionic-kernel.git drm/nouveau/gr/gf100-: split out per-gpc address calculation macro There's a few places where we need to access a GPC register from ucode, but outside of the falcon's io address space. To do this we need to calculate the offset based on which GPC we're executing on. This used to be done manually, but we've since found a "base" offset that can be added by the hardware. To use this, an extra bit needs to be set in the register address, which is what this macro achieves. There should be no functional change from this commit. Signed-off-by: Ben Skeggs --- diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/gpc.fuc b/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/gpc.fuc index 194afe910d21..19d75173655b 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/gpc.fuc +++ b/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/gpc.fuc @@ -52,10 +52,12 @@ mmio_list_base: #endif #ifdef INCLUDE_CODE +#define gpc_addr(reg,addr) /* +*/ imm32(reg,addr) /* +*/ or reg NV_PGRAPH_GPCX_GPCCS_MMIO_CTRL_BASE_ENABLE #define gpc_wr32(addr,reg) /* +*/ gpc_addr($r14,addr) /* */ mov b32 $r15 reg /* -*/ imm32($r14, addr) /* -*/ or $r14 NV_PGRAPH_GPCX_GPCCS_MMIO_CTRL_BASE_ENABLE /* */ call(nv_wr32) // reports an exception to the host diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/gpcgm107.fuc5.h b/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/gpcgm107.fuc5.h index 51f5c3c6e966..f09afe6f05a7 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/gpcgm107.fuc5.h +++ b/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/gpcgm107.fuc5.h @@ -356,33 +356,33 @@ uint32_t gm107_grgpc_code[] = { 0x02687e2f, 0x002fbb00, 0x0f003fbb, - 0x8effb23f, - 0xf0501d60, - 0x8f7e01e5, + 0x1d608e3f, + 0x01e5f050, + 0x8f7effb2, 0x0c0f0000, - 0xa88effb2, - 0xe5f0501d, - 0x008f7e01, + 0x501da88e, + 0xb201e5f0, + 0x008f7eff, 0x03147e00, - 0xb23f0f00, - 0x1d608eff, - 0x01e5f050, + 0x8e3f0f00, + 0xf0501d60, + 0xffb201e5, 0x00008f7e, - 0xffb2000f, - 0x501d9c8e, - 0x7e01e5f0, + 0x9c8e000f, + 0xe5f0501d, + 0x7effb201, 0x0f00008f, 0x03147e01, - 0x8effb200, - 0xf0501da8, - 0x8f7e01e5, - 0xff0f0000, - 0x988effb2, - 0xe5f0501d, - 0x008f7e01, - 0xb2020f00, - 0x1da88eff, + 0x1da88e00, 0x01e5f050, + 0x8f7effb2, + 0xff0f0000, + 0x501d988e, + 0xb201e5f0, + 0x008f7eff, + 0x8e020f00, + 0xf0501da8, + 0xffb201e5, 0x00008f7e, 0x0003147e, 0x85050498, @@ -414,13 +414,13 @@ uint32_t gm107_grgpc_code[] = { 0x0050b7bf, 0x0142b608, 0x0fa81bf4, - 0x8effb23f, - 0xf0501d60, - 0x8f7e01e5, + 0x1d608e3f, + 0x01e5f050, + 0x8f7effb2, 0x0d0f0000, - 0xa88effb2, - 0xe5f0501d, - 0x008f7e01, + 0x501da88e, + 0xb201e5f0, + 0x008f7eff, 0x03147e00, 0x01008000, 0x0003f602, @@ -491,9 +491,9 @@ uint32_t gm107_grgpc_code[] = { 0x8000f804, 0xf6028100, 0x04bd000f, - 0xc48effb2, - 0xe5f0501d, - 0x008f7e01, + 0x501dc48e, + 0xb201e5f0, + 0x008f7eff, 0x0711f400, 0x0006217e, /* 0x0664: ctx_xfer_not_load */ @@ -505,23 +505,23 @@ uint32_t gm107_grgpc_code[] = { 0x4afc8003, 0x0002f602, 0x0c0f04bd, - 0xa88effb2, - 0xe5f0501d, - 0x008f7e01, + 0x501da88e, + 0xb201e5f0, + 0x008f7eff, 0x03147e00, - 0xb23f0f00, - 0x1d608eff, - 0x01e5f050, + 0x8e3f0f00, + 0xf0501d60, + 0xffb201e5, 0x00008f7e, - 0xffb2000f, - 0x501d9c8e, - 0x7e01e5f0, + 0x9c8e000f, + 0xe5f0501d, + 0x7effb201, 0x0f00008f, 0x03147e01, 0x01fcf000, - 0xb203f0b6, - 0x1da88eff, - 0x01e5f050, + 0x8e03f0b6, + 0xf0501da8, + 0xffb201e5, 0x00008f7e, 0xf001acf0, 0x008b02a5, @@ -553,9 +553,9 @@ uint32_t gm107_grgpc_code[] = { 0x1a12f406, /* 0x073c: ctx_xfer_post */ 0x0002277e, - 0xffb20d0f, - 0x501da88e, - 0x7e01e5f0, + 0xa88e0d0f, + 0xe5f0501d, + 0x7effb201, 0x7e00008f, /* 0x0753: ctx_xfer_done */ 0x7e000314,