From: Chunfeng Yun Date: Thu, 3 Aug 2017 10:01:03 +0000 (+0800) Subject: dt-bindings: phy-mt65xx-usb: supports PCIe, SATA and rename file X-Git-Tag: v4.14~449^2~30^2~17 X-Git-Url: https://git.proxmox.com/?a=commitdiff_plain;h=7c6eac238622a4204717f100e2980b0e8d3d1fcd;p=mirror_ubuntu-bionic-kernel.git dt-bindings: phy-mt65xx-usb: supports PCIe, SATA and rename file add support for PCIe and SATA, also add some new compatibles. due to phy-mt65xx-usb.txt holds the bindings for all mediatek SoCs with T-PHY controller, change the name to phy-mtk-tphy.txt to reflect that. Signed-off-by: Chunfeng Yun Signed-off-by: Kishon Vijay Abraham I --- diff --git a/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt b/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt deleted file mode 100644 index 0acc5a99fb79..000000000000 --- a/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt +++ /dev/null @@ -1,137 +0,0 @@ -mt65xx USB3.0 PHY binding --------------------------- - -This binding describes a usb3.0 phy for mt65xx platforms of Medaitek SoC. - -Required properties (controller (parent) node): - - compatible : should be one of - "mediatek,mt2701-u3phy" - "mediatek,mt2712-u3phy" - "mediatek,mt8173-u3phy" - - clocks : (deprecated, use port's clocks instead) a list of phandle + - clock-specifier pairs, one for each entry in clock-names - - clock-names : (deprecated, use port's one instead) must contain - "u3phya_ref": for reference clock of usb3.0 analog phy. - -Required nodes : a sub-node is required for each port the controller - provides. Address range information including the usual - 'reg' property is used inside these nodes to describe - the controller's topology. - -Optional properties (controller (parent) node): - - reg : offset and length of register shared by multiple ports, - exclude port's private register. It is needed on mt2701 - and mt8173, but not on mt2712. - -Required properties (port (child) node): -- reg : address and length of the register set for the port. -- clocks : a list of phandle + clock-specifier pairs, one for each - entry in clock-names -- clock-names : must contain - "ref": 48M reference clock for HighSpeed analog phy; and 26M - reference clock for SuperSpeed analog phy, sometimes is - 24M, 25M or 27M, depended on platform. -- #phy-cells : should be 1 (See second example) - cell after port phandle is phy type from: - - PHY_TYPE_USB2 - - PHY_TYPE_USB3 - -Example: - -u3phy: usb-phy@11290000 { - compatible = "mediatek,mt8173-u3phy"; - reg = <0 0x11290000 0 0x800>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - status = "okay"; - - u2port0: usb-phy@11290800 { - reg = <0 0x11290800 0 0x100>; - clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; - clock-names = "ref"; - #phy-cells = <1>; - status = "okay"; - }; - - u3port0: usb-phy@11290900 { - reg = <0 0x11290800 0 0x700>; - clocks = <&clk26m>; - clock-names = "ref"; - #phy-cells = <1>; - status = "okay"; - }; - - u2port1: usb-phy@11291000 { - reg = <0 0x11291000 0 0x100>; - clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; - clock-names = "ref"; - #phy-cells = <1>; - status = "okay"; - }; -}; - -Specifying phy control of devices ---------------------------------- - -Device nodes should specify the configuration required in their "phys" -property, containing a phandle to the phy port node and a device type; -phy-names for each port are optional. - -Example: - -#include - -usb30: usb@11270000 { - ... - phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>; - phy-names = "usb2-0", "usb3-0"; - ... -}; - - -Layout differences of banks between mt8173/mt2701 and mt2712 -------------------------------------------------------------- -mt8173 and mt2701: -port offset bank -shared 0x0000 SPLLC - 0x0100 FMREG -u2 port0 0x0800 U2PHY_COM -u3 port0 0x0900 U3PHYD - 0x0a00 U3PHYD_BANK2 - 0x0b00 U3PHYA - 0x0c00 U3PHYA_DA -u2 port1 0x1000 U2PHY_COM -u3 port1 0x1100 U3PHYD - 0x1200 U3PHYD_BANK2 - 0x1300 U3PHYA - 0x1400 U3PHYA_DA -u2 port2 0x1800 U2PHY_COM - ... - -mt2712: -port offset bank -u2 port0 0x0000 MISC - 0x0100 FMREG - 0x0300 U2PHY_COM -u3 port0 0x0700 SPLLC - 0x0800 CHIP - 0x0900 U3PHYD - 0x0a00 U3PHYD_BANK2 - 0x0b00 U3PHYA - 0x0c00 U3PHYA_DA -u2 port1 0x1000 MISC - 0x1100 FMREG - 0x1300 U2PHY_COM -u3 port1 0x1700 SPLLC - 0x1800 CHIP - 0x1900 U3PHYD - 0x1a00 U3PHYD_BANK2 - 0x1b00 U3PHYA - 0x1c00 U3PHYA_DA -u2 port2 0x2000 MISC - ... - - SPLLC shared by u3 ports and FMREG shared by u2 ports on -mt8173/mt2701 are put back into each port; a new bank MISC for -u2 ports and CHIP for u3 ports are added on mt2712. diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt new file mode 100644 index 000000000000..faf18084a33a --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt @@ -0,0 +1,144 @@ +MediaTek T-PHY binding +-------------------------- + +T-phy controller supports physical layer functionality for a number of +controllers on MediaTek SoCs, such as, USB2.0, USB3.0, PCIe, and SATA. + +Required properties (controller (parent) node): + - compatible : should be one of + "mediatek,generic-tphy-v1" + "mediatek,generic-tphy-v2" + "mediatek,mt2701-u3phy" (deprecated) + "mediatek,mt2712-u3phy" (deprecated) + "mediatek,mt8173-u3phy"; + make use of "mediatek,generic-tphy-v1" on mt2701 instead and + "mediatek,generic-tphy-v2" on mt2712 instead. + - clocks : (deprecated, use port's clocks instead) a list of phandle + + clock-specifier pairs, one for each entry in clock-names + - clock-names : (deprecated, use port's one instead) must contain + "u3phya_ref": for reference clock of usb3.0 analog phy. + +Required nodes : a sub-node is required for each port the controller + provides. Address range information including the usual + 'reg' property is used inside these nodes to describe + the controller's topology. + +Optional properties (controller (parent) node): + - reg : offset and length of register shared by multiple ports, + exclude port's private register. It is needed on mt2701 + and mt8173, but not on mt2712. + +Required properties (port (child) node): +- reg : address and length of the register set for the port. +- clocks : a list of phandle + clock-specifier pairs, one for each + entry in clock-names +- clock-names : must contain + "ref": 48M reference clock for HighSpeed analog phy; and 26M + reference clock for SuperSpeed analog phy, sometimes is + 24M, 25M or 27M, depended on platform. +- #phy-cells : should be 1 (See second example) + cell after port phandle is phy type from: + - PHY_TYPE_USB2 + - PHY_TYPE_USB3 + - PHY_TYPE_PCIE + - PHY_TYPE_SATA + +Example: + +u3phy: usb-phy@11290000 { + compatible = "mediatek,mt8173-u3phy"; + reg = <0 0x11290000 0 0x800>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "okay"; + + u2port0: usb-phy@11290800 { + reg = <0 0x11290800 0 0x100>; + clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + + u3port0: usb-phy@11290900 { + reg = <0 0x11290800 0 0x700>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + + u2port1: usb-phy@11291000 { + reg = <0 0x11291000 0 0x100>; + clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; +}; + +Specifying phy control of devices +--------------------------------- + +Device nodes should specify the configuration required in their "phys" +property, containing a phandle to the phy port node and a device type; +phy-names for each port are optional. + +Example: + +#include + +usb30: usb@11270000 { + ... + phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>; + phy-names = "usb2-0", "usb3-0"; + ... +}; + + +Layout differences of banks between mt8173/mt2701 and mt2712 +------------------------------------------------------------- +mt8173 and mt2701: +port offset bank +shared 0x0000 SPLLC + 0x0100 FMREG +u2 port0 0x0800 U2PHY_COM +u3 port0 0x0900 U3PHYD + 0x0a00 U3PHYD_BANK2 + 0x0b00 U3PHYA + 0x0c00 U3PHYA_DA +u2 port1 0x1000 U2PHY_COM +u3 port1 0x1100 U3PHYD + 0x1200 U3PHYD_BANK2 + 0x1300 U3PHYA + 0x1400 U3PHYA_DA +u2 port2 0x1800 U2PHY_COM + ... + +mt2712: +port offset bank +u2 port0 0x0000 MISC + 0x0100 FMREG + 0x0300 U2PHY_COM +u3 port0 0x0700 SPLLC + 0x0800 CHIP + 0x0900 U3PHYD + 0x0a00 U3PHYD_BANK2 + 0x0b00 U3PHYA + 0x0c00 U3PHYA_DA +u2 port1 0x1000 MISC + 0x1100 FMREG + 0x1300 U2PHY_COM +u3 port1 0x1700 SPLLC + 0x1800 CHIP + 0x1900 U3PHYD + 0x1a00 U3PHYD_BANK2 + 0x1b00 U3PHYA + 0x1c00 U3PHYA_DA +u2 port2 0x2000 MISC + ... + + SPLLC shared by u3 ports and FMREG shared by u2 ports on +mt8173/mt2701 are put back into each port; a new bank MISC for +u2 ports and CHIP for u3 ports are added on mt2712.