From: Naveen Krishna Ch Date: Wed, 16 Oct 2013 05:30:42 +0000 (+0530) Subject: i2c: exynos5: add High Speed I2C controller driver X-Git-Tag: v5.15~18934^2~9 X-Git-Url: https://git.proxmox.com/?a=commitdiff_plain;h=8a73cd4cfa159918da405d9645deca842590e2fe;p=mirror_ubuntu-kernels.git i2c: exynos5: add High Speed I2C controller driver Adds support for High Speed I2C driver found in Exynos5 and later SoCs from Samsung. Driver only supports Device Tree method. Signed-off-by: Naveen Krishna Chatradhi Signed-off-by: Taekgyun Ko Reviewed-by: Simon Glass Signed-off-by: Yuvaraj Kumar C D Signed-off-by: Andrew Bresticker [wsa: rebased to v3.12-rc4 (no of_i2c.h anymore)] Signed-off-by: Wolfram Sang --- diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt new file mode 100644 index 000000000000..056732cfdcee --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt @@ -0,0 +1,44 @@ +* Samsung's High Speed I2C controller + +The Samsung's High Speed I2C controller is used to interface with I2C devices +at various speeds ranging from 100khz to 3.4Mhz. + +Required properties: + - compatible: value should be. + -> "samsung,exynos5-hsi2c", for i2c compatible with exynos5 hsi2c. + - reg: physical base address of the controller and length of memory mapped + region. + - interrupts: interrupt number to the cpu. + - #address-cells: always 1 (for i2c addresses) + - #size-cells: always 0 + + - Pinctrl: + - pinctrl-0: Pin control group to be used for this controller. + - pinctrl-names: Should contain only one value - "default". + +Optional properties: + - clock-frequency: Desired operating frequency in Hz of the bus. + -> If not specified, the bus operates in fast-speed mode at + at 100khz. + -> If specified, the bus operates in high-speed mode only if the + clock-frequency is >= 1Mhz. + +Example: + +hsi2c@12ca0000 { + compatible = "samsung,exynos5-hsi2c"; + reg = <0x12ca0000 0x100>; + interrupts = <56>; + clock-frequency = <100000>; + + pinctrl-0 = <&i2c4_bus>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + s2mps11_pmic@66 { + compatible = "samsung,s2mps11-pmic"; + reg = <0x66>; + }; +}; diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 7c4bb071c123..80e55305656f 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -436,6 +436,13 @@ config I2C_EG20T ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series. ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH. +config I2C_EXYNOS5 + tristate "Exynos5 high-speed I2C driver" + depends on ARCH_EXYNOS5 && OF + help + Say Y here to include support for high-speed I2C controller in the + Exynos5 based Samsung SoCs. + config I2C_GPIO tristate "GPIO-based bitbanging I2C" depends on GPIOLIB diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index d00997f3eb3b..d1ad3712d905 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -42,6 +42,7 @@ i2c-designware-platform-objs := i2c-designware-platdrv.o obj-$(CONFIG_I2C_DESIGNWARE_PCI) += i2c-designware-pci.o i2c-designware-pci-objs := i2c-designware-pcidrv.o obj-$(CONFIG_I2C_EG20T) += i2c-eg20t.o +obj-$(CONFIG_I2C_EXYNOS5) += i2c-exynos5.o obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c new file mode 100644 index 000000000000..aca3991b7636 --- /dev/null +++ b/drivers/i2c/busses/i2c-exynos5.c @@ -0,0 +1,774 @@ +/** + * i2c-exynos5.c - Samsung Exynos5 I2C Controller Driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * HSI2C controller from Samsung supports 2 modes of operation + * 1. Auto mode: Where in master automatically controls the whole transaction + * 2. Manual mode: Software controls the transaction by issuing commands + * START, READ, WRITE, STOP, RESTART in I2C_MANUAL_CMD register. + * + * Operation mode can be selected by setting AUTO_MODE bit in I2C_CONF register + * + * Special bits are available for both modes of operation to set commands + * and for checking transfer status + */ + +/* Register Map */ +#define HSI2C_CTL 0x00 +#define HSI2C_FIFO_CTL 0x04 +#define HSI2C_TRAILIG_CTL 0x08 +#define HSI2C_CLK_CTL 0x0C +#define HSI2C_CLK_SLOT 0x10 +#define HSI2C_INT_ENABLE 0x20 +#define HSI2C_INT_STATUS 0x24 +#define HSI2C_ERR_STATUS 0x2C +#define HSI2C_FIFO_STATUS 0x30 +#define HSI2C_TX_DATA 0x34 +#define HSI2C_RX_DATA 0x38 +#define HSI2C_CONF 0x40 +#define HSI2C_AUTO_CONF 0x44 +#define HSI2C_TIMEOUT 0x48 +#define HSI2C_MANUAL_CMD 0x4C +#define HSI2C_TRANS_STATUS 0x50 +#define HSI2C_TIMING_HS1 0x54 +#define HSI2C_TIMING_HS2 0x58 +#define HSI2C_TIMING_HS3 0x5C +#define HSI2C_TIMING_FS1 0x60 +#define HSI2C_TIMING_FS2 0x64 +#define HSI2C_TIMING_FS3 0x68 +#define HSI2C_TIMING_SLA 0x6C +#define HSI2C_ADDR 0x70 + +/* I2C_CTL Register bits */ +#define HSI2C_FUNC_MODE_I2C (1u << 0) +#define HSI2C_MASTER (1u << 3) +#define HSI2C_RXCHON (1u << 6) +#define HSI2C_TXCHON (1u << 7) +#define HSI2C_SW_RST (1u << 31) + +/* I2C_FIFO_CTL Register bits */ +#define HSI2C_RXFIFO_EN (1u << 0) +#define HSI2C_TXFIFO_EN (1u << 1) +#define HSI2C_RXFIFO_TRIGGER_LEVEL(x) ((x) << 4) +#define HSI2C_TXFIFO_TRIGGER_LEVEL(x) ((x) << 16) + +/* As per user manual FIFO max depth is 64bytes */ +#define HSI2C_FIFO_MAX 0x40 +/* default trigger levels for Tx and Rx FIFOs */ +#define HSI2C_DEF_TXFIFO_LVL (HSI2C_FIFO_MAX - 0x30) +#define HSI2C_DEF_RXFIFO_LVL (HSI2C_FIFO_MAX - 0x10) + +/* I2C_TRAILING_CTL Register bits */ +#define HSI2C_TRAILING_COUNT (0xf) + +/* I2C_INT_EN Register bits */ +#define HSI2C_INT_TX_ALMOSTEMPTY_EN (1u << 0) +#define HSI2C_INT_RX_ALMOSTFULL_EN (1u << 1) +#define HSI2C_INT_TRAILING_EN (1u << 6) +#define HSI2C_INT_I2C_EN (1u << 9) + +/* I2C_INT_STAT Register bits */ +#define HSI2C_INT_TX_ALMOSTEMPTY (1u << 0) +#define HSI2C_INT_RX_ALMOSTFULL (1u << 1) +#define HSI2C_INT_TX_UNDERRUN (1u << 2) +#define HSI2C_INT_TX_OVERRUN (1u << 3) +#define HSI2C_INT_RX_UNDERRUN (1u << 4) +#define HSI2C_INT_RX_OVERRUN (1u << 5) +#define HSI2C_INT_TRAILING (1u << 6) +#define HSI2C_INT_I2C (1u << 9) + +/* I2C_FIFO_STAT Register bits */ +#define HSI2C_RX_FIFO_EMPTY (1u << 24) +#define HSI2C_RX_FIFO_FULL (1u << 23) +#define HSI2C_RX_FIFO_LVL(x) ((x >> 16) & 0x7f) +#define HSI2C_TX_FIFO_EMPTY (1u << 8) +#define HSI2C_TX_FIFO_FULL (1u << 7) +#define HSI2C_TX_FIFO_LVL(x) ((x >> 0) & 0x7f) + +/* I2C_CONF Register bits */ +#define HSI2C_AUTO_MODE (1u << 31) +#define HSI2C_10BIT_ADDR_MODE (1u << 30) +#define HSI2C_HS_MODE (1u << 29) + +/* I2C_AUTO_CONF Register bits */ +#define HSI2C_READ_WRITE (1u << 16) +#define HSI2C_STOP_AFTER_TRANS (1u << 17) +#define HSI2C_MASTER_RUN (1u << 31) + +/* I2C_TIMEOUT Register bits */ +#define HSI2C_TIMEOUT_EN (1u << 31) +#define HSI2C_TIMEOUT_MASK 0xff + +/* I2C_TRANS_STATUS register bits */ +#define HSI2C_MASTER_BUSY (1u << 17) +#define HSI2C_SLAVE_BUSY (1u << 16) +#define HSI2C_TIMEOUT_AUTO (1u << 4) +#define HSI2C_NO_DEV (1u << 3) +#define HSI2C_NO_DEV_ACK (1u << 2) +#define HSI2C_TRANS_ABORT (1u << 1) +#define HSI2C_TRANS_DONE (1u << 0) + +/* I2C_ADDR register bits */ +#define HSI2C_SLV_ADDR_SLV(x) ((x & 0x3ff) << 0) +#define HSI2C_SLV_ADDR_MAS(x) ((x & 0x3ff) << 10) +#define HSI2C_MASTER_ID(x) ((x & 0xff) << 24) +#define MASTER_ID(x) ((x & 0x7) + 0x08) + +/* + * Controller operating frequency, timing values for operation + * are calculated against this frequency + */ +#define HSI2C_HS_TX_CLOCK 1000000 +#define HSI2C_FS_TX_CLOCK 100000 +#define HSI2C_HIGH_SPD 1 +#define HSI2C_FAST_SPD 0 + +#define EXYNOS5_I2C_TIMEOUT (msecs_to_jiffies(1000)) + +struct exynos5_i2c { + struct i2c_adapter adap; + unsigned int suspended:1; + + struct i2c_msg *msg; + struct completion msg_complete; + unsigned int msg_ptr; + + unsigned int irq; + + void __iomem *regs; + struct clk *clk; + struct device *dev; + int state; + + spinlock_t lock; /* IRQ synchronization */ + + /* + * Since the TRANS_DONE bit is cleared on read, and we may read it + * either during an IRQ or after a transaction, keep track of its + * state here. + */ + int trans_done; + + /* Controller operating frequency */ + unsigned int fs_clock; + unsigned int hs_clock; + + /* + * HSI2C Controller can operate in + * 1. High speed upto 3.4Mbps + * 2. Fast speed upto 1Mbps + */ + int speed_mode; +}; + +static const struct of_device_id exynos5_i2c_match[] = { + { .compatible = "samsung,exynos5-hsi2c" }, + {}, +}; +MODULE_DEVICE_TABLE(of, exynos5_i2c_match); + +static void exynos5_i2c_clr_pend_irq(struct exynos5_i2c *i2c) +{ + writel(readl(i2c->regs + HSI2C_INT_STATUS), + i2c->regs + HSI2C_INT_STATUS); +} + +/* + * exynos5_i2c_set_timing: updates the registers with appropriate + * timing values calculated + * + * Returns 0 on success, -EINVAL if the cycle length cannot + * be calculated. + */ +static int exynos5_i2c_set_timing(struct exynos5_i2c *i2c, int mode) +{ + u32 i2c_timing_s1; + u32 i2c_timing_s2; + u32 i2c_timing_s3; + u32 i2c_timing_sla; + unsigned int t_start_su, t_start_hd; + unsigned int t_stop_su; + unsigned int t_data_su, t_data_hd; + unsigned int t_scl_l, t_scl_h; + unsigned int t_sr_release; + unsigned int t_ftl_cycle; + unsigned int clkin = clk_get_rate(i2c->clk); + unsigned int div, utemp0 = 0, utemp1 = 0, clk_cycle; + unsigned int op_clk = (mode == HSI2C_HIGH_SPD) ? + i2c->hs_clock : i2c->fs_clock; + + /* + * FPCLK / FI2C = + * (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2) + 8 + 2 * FLT_CYCLE + * utemp0 = (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2) + * utemp1 = (TSCLK_L + TSCLK_H + 2) + */ + t_ftl_cycle = (readl(i2c->regs + HSI2C_CONF) >> 16) & 0x7; + utemp0 = (clkin / op_clk) - 8 - 2 * t_ftl_cycle; + + /* CLK_DIV max is 256 */ + for (div = 0; div < 256; div++) { + utemp1 = utemp0 / (div + 1); + + /* + * SCL_L and SCL_H each has max value of 255 + * Hence, For the clk_cycle to the have right value + * utemp1 has to be less then 512 and more than 4. + */ + if ((utemp1 < 512) && (utemp1 > 4)) { + clk_cycle = utemp1 - 2; + break; + } else if (div == 255) { + dev_warn(i2c->dev, "Failed to calculate divisor"); + return -EINVAL; + } + } + + t_scl_l = clk_cycle / 2; + t_scl_h = clk_cycle / 2; + t_start_su = t_scl_l; + t_start_hd = t_scl_l; + t_stop_su = t_scl_l; + t_data_su = t_scl_l / 2; + t_data_hd = t_scl_l / 2; + t_sr_release = clk_cycle; + + i2c_timing_s1 = t_start_su << 24 | t_start_hd << 16 | t_stop_su << 8; + i2c_timing_s2 = t_data_su << 24 | t_scl_l << 8 | t_scl_h << 0; + i2c_timing_s3 = div << 16 | t_sr_release << 0; + i2c_timing_sla = t_data_hd << 0; + + dev_dbg(i2c->dev, "tSTART_SU: %X, tSTART_HD: %X, tSTOP_SU: %X\n", + t_start_su, t_start_hd, t_stop_su); + dev_dbg(i2c->dev, "tDATA_SU: %X, tSCL_L: %X, tSCL_H: %X\n", + t_data_su, t_scl_l, t_scl_h); + dev_dbg(i2c->dev, "nClkDiv: %X, tSR_RELEASE: %X\n", + div, t_sr_release); + dev_dbg(i2c->dev, "tDATA_HD: %X\n", t_data_hd); + + if (mode == HSI2C_HIGH_SPD) { + writel(i2c_timing_s1, i2c->regs + HSI2C_TIMING_HS1); + writel(i2c_timing_s2, i2c->regs + HSI2C_TIMING_HS2); + writel(i2c_timing_s3, i2c->regs + HSI2C_TIMING_HS3); + } else { + writel(i2c_timing_s1, i2c->regs + HSI2C_TIMING_FS1); + writel(i2c_timing_s2, i2c->regs + HSI2C_TIMING_FS2); + writel(i2c_timing_s3, i2c->regs + HSI2C_TIMING_FS3); + } + writel(i2c_timing_sla, i2c->regs + HSI2C_TIMING_SLA); + + return 0; +} + +static int exynos5_hsi2c_clock_setup(struct exynos5_i2c *i2c) +{ + /* + * Configure the Fast speed timing values + * Even the High Speed mode initially starts with Fast mode + */ + if (exynos5_i2c_set_timing(i2c, HSI2C_FAST_SPD)) { + dev_err(i2c->dev, "HSI2C FS Clock set up failed\n"); + return -EINVAL; + } + + /* configure the High speed timing values */ + if (i2c->speed_mode == HSI2C_HIGH_SPD) { + if (exynos5_i2c_set_timing(i2c, HSI2C_HIGH_SPD)) { + dev_err(i2c->dev, "HSI2C HS Clock set up failed\n"); + return -EINVAL; + } + } + + return 0; +} + +/* + * exynos5_i2c_init: configures the controller for I2C functionality + * Programs I2C controller for Master mode operation + */ +static void exynos5_i2c_init(struct exynos5_i2c *i2c) +{ + u32 i2c_conf = readl(i2c->regs + HSI2C_CONF); + u32 i2c_timeout = readl(i2c->regs + HSI2C_TIMEOUT); + + /* Clear to disable Timeout */ + i2c_timeout &= ~HSI2C_TIMEOUT_EN; + writel(i2c_timeout, i2c->regs + HSI2C_TIMEOUT); + + writel((HSI2C_FUNC_MODE_I2C | HSI2C_MASTER), + i2c->regs + HSI2C_CTL); + writel(HSI2C_TRAILING_COUNT, i2c->regs + HSI2C_TRAILIG_CTL); + + if (i2c->speed_mode == HSI2C_HIGH_SPD) { + writel(HSI2C_MASTER_ID(MASTER_ID(i2c->adap.nr)), + i2c->regs + HSI2C_ADDR); + i2c_conf |= HSI2C_HS_MODE; + } + + writel(i2c_conf | HSI2C_AUTO_MODE, i2c->regs + HSI2C_CONF); +} + +static void exynos5_i2c_reset(struct exynos5_i2c *i2c) +{ + u32 i2c_ctl; + + /* Set and clear the bit for reset */ + i2c_ctl = readl(i2c->regs + HSI2C_CTL); + i2c_ctl |= HSI2C_SW_RST; + writel(i2c_ctl, i2c->regs + HSI2C_CTL); + + i2c_ctl = readl(i2c->regs + HSI2C_CTL); + i2c_ctl &= ~HSI2C_SW_RST; + writel(i2c_ctl, i2c->regs + HSI2C_CTL); + + /* We don't expect calculations to fail during the run */ + exynos5_hsi2c_clock_setup(i2c); + /* Initialize the configure registers */ + exynos5_i2c_init(i2c); +} + +/* + * exynos5_i2c_irq: top level IRQ servicing routine + * + * INT_STATUS registers gives the interrupt details. Further, + * FIFO_STATUS or TRANS_STATUS registers are to be check for detailed + * state of the bus. + */ +static irqreturn_t exynos5_i2c_irq(int irqno, void *dev_id) +{ + struct exynos5_i2c *i2c = dev_id; + u32 fifo_level, int_status, fifo_status, trans_status; + unsigned char byte; + int len = 0; + + i2c->state = -EINVAL; + + spin_lock(&i2c->lock); + + int_status = readl(i2c->regs + HSI2C_INT_STATUS); + writel(int_status, i2c->regs + HSI2C_INT_STATUS); + fifo_status = readl(i2c->regs + HSI2C_FIFO_STATUS); + + /* handle interrupt related to the transfer status */ + if (int_status & HSI2C_INT_I2C) { + trans_status = readl(i2c->regs + HSI2C_TRANS_STATUS); + if (trans_status & HSI2C_NO_DEV_ACK) { + dev_dbg(i2c->dev, "No ACK from device\n"); + i2c->state = -ENXIO; + goto stop; + } else if (trans_status & HSI2C_NO_DEV) { + dev_dbg(i2c->dev, "No device\n"); + i2c->state = -ENXIO; + goto stop; + } else if (trans_status & HSI2C_TRANS_ABORT) { + dev_dbg(i2c->dev, "Deal with arbitration lose\n"); + i2c->state = -EAGAIN; + goto stop; + } else if (trans_status & HSI2C_TIMEOUT_AUTO) { + dev_dbg(i2c->dev, "Accessing device timed out\n"); + i2c->state = -EAGAIN; + goto stop; + } else if (trans_status & HSI2C_TRANS_DONE) { + i2c->trans_done = 1; + i2c->state = 0; + } + } + + if ((i2c->msg->flags & I2C_M_RD) && (int_status & + (HSI2C_INT_TRAILING | HSI2C_INT_RX_ALMOSTFULL))) { + fifo_status = readl(i2c->regs + HSI2C_FIFO_STATUS); + fifo_level = HSI2C_RX_FIFO_LVL(fifo_status); + len = min(fifo_level, i2c->msg->len - i2c->msg_ptr); + + while (len > 0) { + byte = (unsigned char) + readl(i2c->regs + HSI2C_RX_DATA); + i2c->msg->buf[i2c->msg_ptr++] = byte; + len--; + } + i2c->state = 0; + } else if (int_status & HSI2C_INT_TX_ALMOSTEMPTY) { + fifo_status = readl(i2c->regs + HSI2C_FIFO_STATUS); + fifo_level = HSI2C_TX_FIFO_LVL(fifo_status); + + len = HSI2C_FIFO_MAX - fifo_level; + if (len > (i2c->msg->len - i2c->msg_ptr)) + len = i2c->msg->len - i2c->msg_ptr; + + while (len > 0) { + byte = i2c->msg->buf[i2c->msg_ptr++]; + writel(byte, i2c->regs + HSI2C_TX_DATA); + len--; + } + i2c->state = 0; + } + + stop: + if ((i2c->trans_done && (i2c->msg->len == i2c->msg_ptr)) || + (i2c->state < 0)) { + writel(0, i2c->regs + HSI2C_INT_ENABLE); + exynos5_i2c_clr_pend_irq(i2c); + complete(&i2c->msg_complete); + } + + spin_unlock(&i2c->lock); + + return IRQ_HANDLED; +} + +/* + * exynos5_i2c_wait_bus_idle + * + * Wait for the bus to go idle, indicated by the MASTER_BUSY bit being + * cleared. + * + * Returns -EBUSY if the bus cannot be bought to idle + */ +static int exynos5_i2c_wait_bus_idle(struct exynos5_i2c *i2c) +{ + unsigned long stop_time; + u32 trans_status; + + /* wait for 100 milli seconds for the bus to be idle */ + stop_time = jiffies + msecs_to_jiffies(100) + 1; + do { + trans_status = readl(i2c->regs + HSI2C_TRANS_STATUS); + if (!(trans_status & HSI2C_MASTER_BUSY)) + return 0; + + usleep_range(50, 200); + } while (time_before(jiffies, stop_time)); + + return -EBUSY; +} + +/* + * exynos5_i2c_message_start: Configures the bus and starts the xfer + * i2c: struct exynos5_i2c pointer for the current bus + * stop: Enables stop after transfer if set. Set for last transfer of + * in the list of messages. + * + * Configures the bus for read/write function + * Sets chip address to talk to, message length to be sent. + * Enables appropriate interrupts and sends start xfer command. + */ +static void exynos5_i2c_message_start(struct exynos5_i2c *i2c, int stop) +{ + u32 i2c_ctl; + u32 int_en = HSI2C_INT_I2C_EN; + u32 i2c_auto_conf = 0; + u32 fifo_ctl; + unsigned long flags; + + i2c_ctl = readl(i2c->regs + HSI2C_CTL); + i2c_ctl &= ~(HSI2C_TXCHON | HSI2C_RXCHON); + fifo_ctl = HSI2C_RXFIFO_EN | HSI2C_TXFIFO_EN; + + if (i2c->msg->flags & I2C_M_RD) { + i2c_ctl |= HSI2C_RXCHON; + + i2c_auto_conf = HSI2C_READ_WRITE; + + fifo_ctl |= HSI2C_RXFIFO_TRIGGER_LEVEL(HSI2C_DEF_TXFIFO_LVL); + int_en |= (HSI2C_INT_RX_ALMOSTFULL_EN | + HSI2C_INT_TRAILING_EN); + } else { + i2c_ctl |= HSI2C_TXCHON; + + fifo_ctl |= HSI2C_TXFIFO_TRIGGER_LEVEL(HSI2C_DEF_RXFIFO_LVL); + int_en |= HSI2C_INT_TX_ALMOSTEMPTY_EN; + } + + writel(HSI2C_SLV_ADDR_MAS(i2c->msg->addr), i2c->regs + HSI2C_ADDR); + + writel(fifo_ctl, i2c->regs + HSI2C_FIFO_CTL); + writel(i2c_ctl, i2c->regs + HSI2C_CTL); + + + /* + * Enable interrupts before starting the transfer so that we don't + * miss any INT_I2C interrupts. + */ + spin_lock_irqsave(&i2c->lock, flags); + writel(int_en, i2c->regs + HSI2C_INT_ENABLE); + + if (stop == 1) + i2c_auto_conf |= HSI2C_STOP_AFTER_TRANS; + i2c_auto_conf |= i2c->msg->len; + i2c_auto_conf |= HSI2C_MASTER_RUN; + writel(i2c_auto_conf, i2c->regs + HSI2C_AUTO_CONF); + spin_unlock_irqrestore(&i2c->lock, flags); +} + +static int exynos5_i2c_xfer_msg(struct exynos5_i2c *i2c, + struct i2c_msg *msgs, int stop) +{ + unsigned long timeout; + int ret; + + i2c->msg = msgs; + i2c->msg_ptr = 0; + i2c->trans_done = 0; + + INIT_COMPLETION(i2c->msg_complete); + + exynos5_i2c_message_start(i2c, stop); + + timeout = wait_for_completion_timeout(&i2c->msg_complete, + EXYNOS5_I2C_TIMEOUT); + if (timeout == 0) + ret = -ETIMEDOUT; + else + ret = i2c->state; + + /* + * If this is the last message to be transfered (stop == 1) + * Then check if the bus can be brought back to idle. + */ + if (ret == 0 && stop) + ret = exynos5_i2c_wait_bus_idle(i2c); + + if (ret < 0) { + exynos5_i2c_reset(i2c); + if (ret == -ETIMEDOUT) + dev_warn(i2c->dev, "%s timeout\n", + (msgs->flags & I2C_M_RD) ? "rx" : "tx"); + } + + /* Return the state as in interrupt routine */ + return ret; +} + +static int exynos5_i2c_xfer(struct i2c_adapter *adap, + struct i2c_msg *msgs, int num) +{ + struct exynos5_i2c *i2c = (struct exynos5_i2c *)adap->algo_data; + int i = 0, ret = 0, stop = 0; + + if (i2c->suspended) { + dev_err(i2c->dev, "HS-I2C is not initialzed.\n"); + return -EIO; + } + + clk_prepare_enable(i2c->clk); + + for (i = 0; i < num; i++, msgs++) { + stop = (i == num - 1); + + ret = exynos5_i2c_xfer_msg(i2c, msgs, stop); + + if (ret < 0) + goto out; + } + + if (i == num) { + ret = num; + } else { + /* Only one message, cannot access the device */ + if (i == 1) + ret = -EREMOTEIO; + else + ret = i; + + dev_warn(i2c->dev, "xfer message failed\n"); + } + + out: + clk_disable_unprepare(i2c->clk); + return ret; +} + +static u32 exynos5_i2c_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK); +} + +static const struct i2c_algorithm exynos5_i2c_algorithm = { + .master_xfer = exynos5_i2c_xfer, + .functionality = exynos5_i2c_func, +}; + +static int exynos5_i2c_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct exynos5_i2c *i2c; + struct resource *mem; + unsigned int op_clock; + int ret; + + i2c = devm_kzalloc(&pdev->dev, sizeof(struct exynos5_i2c), GFP_KERNEL); + if (!i2c) { + dev_err(&pdev->dev, "no memory for state\n"); + return -ENOMEM; + } + + if (of_property_read_u32(np, "clock-frequency", &op_clock)) { + i2c->speed_mode = HSI2C_FAST_SPD; + i2c->fs_clock = HSI2C_FS_TX_CLOCK; + } else { + if (op_clock >= HSI2C_HS_TX_CLOCK) { + i2c->speed_mode = HSI2C_HIGH_SPD; + i2c->fs_clock = HSI2C_FS_TX_CLOCK; + i2c->hs_clock = op_clock; + } else { + i2c->speed_mode = HSI2C_FAST_SPD; + i2c->fs_clock = op_clock; + } + } + + strlcpy(i2c->adap.name, "exynos5-i2c", sizeof(i2c->adap.name)); + i2c->adap.owner = THIS_MODULE; + i2c->adap.algo = &exynos5_i2c_algorithm; + i2c->adap.retries = 3; + + i2c->dev = &pdev->dev; + i2c->clk = devm_clk_get(&pdev->dev, "hsi2c"); + if (IS_ERR(i2c->clk)) { + dev_err(&pdev->dev, "cannot get clock\n"); + return -ENOENT; + } + + clk_prepare_enable(i2c->clk); + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + i2c->regs = devm_ioremap_resource(&pdev->dev, mem); + if (IS_ERR(i2c->regs)) { + ret = PTR_ERR(i2c->regs); + goto err_clk; + } + + i2c->adap.dev.of_node = np; + i2c->adap.algo_data = i2c; + i2c->adap.dev.parent = &pdev->dev; + + /* Clear pending interrupts from u-boot or misc causes */ + exynos5_i2c_clr_pend_irq(i2c); + + spin_lock_init(&i2c->lock); + init_completion(&i2c->msg_complete); + + i2c->irq = ret = platform_get_irq(pdev, 0); + if (ret <= 0) { + dev_err(&pdev->dev, "cannot find HS-I2C IRQ\n"); + ret = -EINVAL; + goto err_clk; + } + + ret = devm_request_irq(&pdev->dev, i2c->irq, exynos5_i2c_irq, + IRQF_NO_SUSPEND | IRQF_ONESHOT, + dev_name(&pdev->dev), i2c); + + if (ret != 0) { + dev_err(&pdev->dev, "cannot request HS-I2C IRQ %d\n", i2c->irq); + goto err_clk; + } + + ret = exynos5_hsi2c_clock_setup(i2c); + if (ret) + goto err_clk; + + exynos5_i2c_init(i2c); + + ret = i2c_add_adapter(&i2c->adap); + if (ret < 0) { + dev_err(&pdev->dev, "failed to add bus to i2c core\n"); + goto err_clk; + } + + platform_set_drvdata(pdev, i2c); + + clk_disable_unprepare(i2c->clk); + + return 0; + + err_clk: + clk_disable_unprepare(i2c->clk); + return ret; +} + +static int exynos5_i2c_remove(struct platform_device *pdev) +{ + struct exynos5_i2c *i2c = platform_get_drvdata(pdev); + + i2c_del_adapter(&i2c->adap); + clk_disable_unprepare(i2c->clk); + + return 0; +} + +static int exynos5_i2c_suspend_noirq(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct exynos5_i2c *i2c = platform_get_drvdata(pdev); + + i2c->suspended = 1; + + return 0; +} + +static int exynos5_i2c_resume_noirq(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct exynos5_i2c *i2c = platform_get_drvdata(pdev); + int ret = 0; + + clk_prepare_enable(i2c->clk); + + ret = exynos5_hsi2c_clock_setup(i2c); + if (ret) { + clk_disable_unprepare(i2c->clk); + return ret; + } + + exynos5_i2c_init(i2c); + clk_disable_unprepare(i2c->clk); + i2c->suspended = 0; + + return 0; +} + +static SIMPLE_DEV_PM_OPS(exynos5_i2c_dev_pm_ops, exynos5_i2c_suspend_noirq, + exynos5_i2c_resume_noirq); + +static struct platform_driver exynos5_i2c_driver = { + .probe = exynos5_i2c_probe, + .remove = exynos5_i2c_remove, + .driver = { + .owner = THIS_MODULE, + .name = "exynos5-hsi2c", + .pm = &exynos5_i2c_dev_pm_ops, + .of_match_table = exynos5_i2c_match, + }, +}; + +module_platform_driver(exynos5_i2c_driver); + +MODULE_DESCRIPTION("Exynos5 HS-I2C Bus driver"); +MODULE_AUTHOR("Naveen Krishna Chatradhi, "); +MODULE_AUTHOR("Taekgyun Ko, "); +MODULE_LICENSE("GPL v2");