From: Brian King Date: Fri, 4 Sep 2015 19:47:06 +0000 (-0500) Subject: SCSI: Increase REPORT_LUNS timeout X-Git-Tag: v5.15~14693^2~1^2~86 X-Git-Url: https://git.proxmox.com/?a=commitdiff_plain;h=b39c9a661b9bc77e064cade26cf913a1d4255d55;p=mirror_ubuntu-kernels.git SCSI: Increase REPORT_LUNS timeout This patch fixes an issue seen with an IBM 2145 (SVC) where, following an error injection test which results in paths going offline, when they came back online, the path would timeout the REPORT_LUNS issued during the scan. This timeout situation continued until retries were expired, resulting in falling back to a sequential LUN scan. Then, since the target responds with PQ=1, PDT=0 for all possible LUNs, due to the way the sequential LUN scan code works, we end up adding 512 LUNs for each target, when there is really only a small handful of LUNs that are actually present. This patch increases the timeout used on the REPORT_LUNS to 30 seconds. This patch solves the issue of 512 non existent LUNs showing up after this event. Signed-off-by: Brian King Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen --- diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index f9f3f8203d42..3b3dfef4d839 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -55,6 +55,7 @@ * Default timeout */ #define SCSI_TIMEOUT (2*HZ) +#define SCSI_REPORT_LUNS_TIMEOUT (30*HZ) /* * Prefix values for the SCSI id's (stored in sysfs name field) @@ -1383,7 +1384,7 @@ retry: result = scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE, lun_data, length, &sshdr, - SCSI_TIMEOUT + 4 * HZ, 3, NULL); + SCSI_REPORT_LUNS_TIMEOUT, 3, NULL); SCSI_LOG_SCAN_BUS(3, sdev_printk (KERN_INFO, sdev, "scsi scan: REPORT LUNS"