From: David S. Miller Date: Wed, 17 Dec 2008 07:53:20 +0000 (-0800) Subject: bnx2x: Fix namespace collision with FLOW_CTRL_{TX,RX} X-Git-Tag: v5.15~36171^2~145 X-Git-Url: https://git.proxmox.com/?a=commitdiff_plain;h=c0700f90e5300c63d01c70e157e75e4510dd2981;p=mirror_ubuntu-kernels.git bnx2x: Fix namespace collision with FLOW_CTRL_{TX,RX} These are now defined in linux/mii.h and the bnx2x driver defines different values which are shared with hardware data structures. So add a "BNX2X_" prefix to these macro names. Based upon a report from Stephen Rothwell. Signed-off-by: David S. Miller --- diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c index 4ce7fe9c5251..67de94f1f30e 100644 --- a/drivers/net/bnx2x_link.c +++ b/drivers/net/bnx2x_link.c @@ -289,7 +289,7 @@ static u8 bnx2x_emac_enable(struct link_params *params, /* pause enable/disable */ bnx2x_bits_dis(bp, emac_base + EMAC_REG_EMAC_RX_MODE, EMAC_RX_MODE_FLOW_EN); - if (vars->flow_ctrl & FLOW_CTRL_RX) + if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX) bnx2x_bits_en(bp, emac_base + EMAC_REG_EMAC_RX_MODE, EMAC_RX_MODE_FLOW_EN); @@ -297,7 +297,7 @@ static u8 bnx2x_emac_enable(struct link_params *params, bnx2x_bits_dis(bp, emac_base + EMAC_REG_EMAC_TX_MODE, (EMAC_TX_MODE_EXT_PAUSE_EN | EMAC_TX_MODE_FLOW_EN)); - if (vars->flow_ctrl & FLOW_CTRL_TX) + if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) bnx2x_bits_en(bp, emac_base + EMAC_REG_EMAC_TX_MODE, (EMAC_TX_MODE_EXT_PAUSE_EN | @@ -333,7 +333,7 @@ static u8 bnx2x_emac_enable(struct link_params *params, /* enable the NIG in/out to the emac */ REG_WR(bp, NIG_REG_EMAC0_IN_EN + port*4, 0x1); val = 0; - if (vars->flow_ctrl & FLOW_CTRL_TX) + if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) val = 1; REG_WR(bp, NIG_REG_EMAC0_PAUSE_OUT_EN + port*4, val); @@ -396,7 +396,7 @@ static u8 bnx2x_bmac_enable(struct link_params *params, struct link_vars *vars, /* tx control */ val = 0xc0; - if (vars->flow_ctrl & FLOW_CTRL_TX) + if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) val |= 0x800000; wb_data[0] = val; wb_data[1] = 0; @@ -423,7 +423,7 @@ static u8 bnx2x_bmac_enable(struct link_params *params, struct link_vars *vars, /* rx control set to don't strip crc */ val = 0x14; - if (vars->flow_ctrl & FLOW_CTRL_RX) + if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX) val |= 0x20; wb_data[0] = val; wb_data[1] = 0; @@ -460,7 +460,7 @@ static u8 bnx2x_bmac_enable(struct link_params *params, struct link_vars *vars, REG_WR(bp, NIG_REG_XGXS_LANE_SEL_P0 + port*4, 0x0); REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + port*4, 0x0); val = 0; - if (vars->flow_ctrl & FLOW_CTRL_TX) + if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) val = 1; REG_WR(bp, NIG_REG_BMAC0_PAUSE_OUT_EN + port*4, val); REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0x0); @@ -580,14 +580,14 @@ void bnx2x_link_status_update(struct link_params *params, } if (vars->link_status & LINK_STATUS_TX_FLOW_CONTROL_ENABLED) - vars->flow_ctrl |= FLOW_CTRL_TX; + vars->flow_ctrl |= BNX2X_FLOW_CTRL_TX; else - vars->flow_ctrl &= ~FLOW_CTRL_TX; + vars->flow_ctrl &= ~BNX2X_FLOW_CTRL_TX; if (vars->link_status & LINK_STATUS_RX_FLOW_CONTROL_ENABLED) - vars->flow_ctrl |= FLOW_CTRL_RX; + vars->flow_ctrl |= BNX2X_FLOW_CTRL_RX; else - vars->flow_ctrl &= ~FLOW_CTRL_RX; + vars->flow_ctrl &= ~BNX2X_FLOW_CTRL_RX; if (vars->phy_flags & PHY_XGXS_FLAG) { if (vars->line_speed && @@ -618,7 +618,7 @@ void bnx2x_link_status_update(struct link_params *params, vars->line_speed = 0; vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = FLOW_CTRL_NONE; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; /* indicate no mac active */ vars->mac_type = MAC_TYPE_NONE; @@ -691,7 +691,7 @@ static u8 bnx2x_pbf_update(struct link_params *params, u32 flow_ctrl, return -EINVAL; } - if (flow_ctrl & FLOW_CTRL_RX || + if (flow_ctrl & BNX2X_FLOW_CTRL_RX || line_speed == SPEED_10 || line_speed == SPEED_100 || line_speed == SPEED_1000 || @@ -1300,8 +1300,8 @@ static void bnx2x_calc_ieee_aneg_adv(struct link_params *params, u32 *ieee_fc) * Please refer to Table 28B-3 of the 802.3ab-1999 spec */ switch (params->req_flow_ctrl) { - case FLOW_CTRL_AUTO: - if (params->req_fc_auto_adv == FLOW_CTRL_BOTH) { + case BNX2X_FLOW_CTRL_AUTO: + if (params->req_fc_auto_adv == BNX2X_FLOW_CTRL_BOTH) { *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; } else { @@ -1309,17 +1309,17 @@ static void bnx2x_calc_ieee_aneg_adv(struct link_params *params, u32 *ieee_fc) MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; } break; - case FLOW_CTRL_TX: + case BNX2X_FLOW_CTRL_TX: *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; break; - case FLOW_CTRL_RX: - case FLOW_CTRL_BOTH: + case BNX2X_FLOW_CTRL_RX: + case BNX2X_FLOW_CTRL_BOTH: *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; break; - case FLOW_CTRL_NONE: + case BNX2X_FLOW_CTRL_NONE: default: *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE; break; @@ -1463,18 +1463,18 @@ static void bnx2x_pause_resolve(struct link_vars *vars, u32 pause_result) { /* LD LP */ switch (pause_result) { /* ASYM P ASYM P */ case 0xb: /* 1 0 1 1 */ - vars->flow_ctrl = FLOW_CTRL_TX; + vars->flow_ctrl = BNX2X_FLOW_CTRL_TX; break; case 0xe: /* 1 1 1 0 */ - vars->flow_ctrl = FLOW_CTRL_RX; + vars->flow_ctrl = BNX2X_FLOW_CTRL_RX; break; case 0x5: /* 0 1 0 1 */ case 0x7: /* 0 1 1 1 */ case 0xd: /* 1 1 0 1 */ case 0xf: /* 1 1 1 1 */ - vars->flow_ctrl = FLOW_CTRL_BOTH; + vars->flow_ctrl = BNX2X_FLOW_CTRL_BOTH; break; default: @@ -1531,7 +1531,7 @@ static u8 bnx2x_ext_phy_resove_fc(struct link_params *params, DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x \n", pause_result); bnx2x_pause_resolve(vars, pause_result); - if (vars->flow_ctrl == FLOW_CTRL_NONE && + if (vars->flow_ctrl == BNX2X_FLOW_CTRL_NONE && ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) { bnx2x_cl45_read(bp, port, ext_phy_type, @@ -1567,10 +1567,10 @@ static void bnx2x_flow_ctrl_resolve(struct link_params *params, u16 lp_pause; /* link partner */ u16 pause_result; - vars->flow_ctrl = FLOW_CTRL_NONE; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; /* resolve from gp_status in case of AN complete and not sgmii */ - if ((params->req_flow_ctrl == FLOW_CTRL_AUTO) && + if ((params->req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) && (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) && (!(vars->phy_flags & PHY_SGMII_FLAG)) && (XGXS_EXT_PHY_TYPE(params->ext_phy_config) == @@ -1591,11 +1591,11 @@ static void bnx2x_flow_ctrl_resolve(struct link_params *params, MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>7; DP(NETIF_MSG_LINK, "pause_result 0x%x\n", pause_result); bnx2x_pause_resolve(vars, pause_result); - } else if ((params->req_flow_ctrl == FLOW_CTRL_AUTO) && + } else if ((params->req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) && (bnx2x_ext_phy_resove_fc(params, vars))) { return; } else { - if (params->req_flow_ctrl == FLOW_CTRL_AUTO) + if (params->req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) vars->flow_ctrl = params->req_fc_auto_adv; else vars->flow_ctrl = params->req_flow_ctrl; @@ -1728,11 +1728,11 @@ static u8 bnx2x_link_settings_status(struct link_params *params, LINK_STATUS_PARALLEL_DETECTION_USED; } - if (vars->flow_ctrl & FLOW_CTRL_TX) + if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) vars->link_status |= LINK_STATUS_TX_FLOW_CONTROL_ENABLED; - if (vars->flow_ctrl & FLOW_CTRL_RX) + if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX) vars->link_status |= LINK_STATUS_RX_FLOW_CONTROL_ENABLED; @@ -1742,7 +1742,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params, vars->phy_link_up = 0; vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = FLOW_CTRL_NONE; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; vars->autoneg = AUTO_NEG_DISABLED; vars->mac_type = MAC_TYPE_NONE; } @@ -3924,7 +3924,7 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) vars->link_up = 0; vars->line_speed = 0; vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = FLOW_CTRL_NONE; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; vars->mac_type = MAC_TYPE_NONE; if (params->switch_cfg == SWITCH_CFG_1G) @@ -3946,12 +3946,12 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) vars->link_up = 1; vars->line_speed = SPEED_10000; vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = FLOW_CTRL_NONE; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; vars->link_status = (LINK_STATUS_LINK_UP | LINK_10GTFD); /* enable on E1.5 FPGA */ if (CHIP_IS_E1H(bp)) { vars->flow_ctrl |= - (FLOW_CTRL_TX | FLOW_CTRL_RX); + (BNX2X_FLOW_CTRL_TX | BNX2X_FLOW_CTRL_RX); vars->link_status |= (LINK_STATUS_TX_FLOW_CONTROL_ENABLED | LINK_STATUS_RX_FLOW_CONTROL_ENABLED); @@ -3974,7 +3974,7 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) vars->link_up = 1; vars->line_speed = SPEED_10000; vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = FLOW_CTRL_NONE; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; vars->link_status = (LINK_STATUS_LINK_UP | LINK_10GTFD); bnx2x_bmac_enable(params, vars, 0); @@ -3994,7 +3994,7 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) vars->link_up = 1; vars->line_speed = SPEED_10000; vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = FLOW_CTRL_NONE; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; vars->mac_type = MAC_TYPE_BMAC; vars->phy_flags = PHY_XGXS_FLAG; @@ -4009,7 +4009,7 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) vars->link_up = 1; vars->line_speed = SPEED_1000; vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = FLOW_CTRL_NONE; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; vars->mac_type = MAC_TYPE_EMAC; vars->phy_flags = PHY_XGXS_FLAG; @@ -4026,7 +4026,7 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) vars->link_up = 1; vars->line_speed = SPEED_10000; vars->duplex = DUPLEX_FULL; - vars->flow_ctrl = FLOW_CTRL_NONE; + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; vars->phy_flags = PHY_XGXS_FLAG; diff --git a/drivers/net/bnx2x_link.h b/drivers/net/bnx2x_link.h index 86d54a17b411..47cb585f4278 100644 --- a/drivers/net/bnx2x_link.h +++ b/drivers/net/bnx2x_link.h @@ -26,11 +26,11 @@ -#define FLOW_CTRL_AUTO PORT_FEATURE_FLOW_CONTROL_AUTO -#define FLOW_CTRL_TX PORT_FEATURE_FLOW_CONTROL_TX -#define FLOW_CTRL_RX PORT_FEATURE_FLOW_CONTROL_RX -#define FLOW_CTRL_BOTH PORT_FEATURE_FLOW_CONTROL_BOTH -#define FLOW_CTRL_NONE PORT_FEATURE_FLOW_CONTROL_NONE +#define BNX2X_FLOW_CTRL_AUTO PORT_FEATURE_FLOW_CONTROL_AUTO +#define BNX2X_FLOW_CTRL_TX PORT_FEATURE_FLOW_CONTROL_TX +#define BNX2X_FLOW_CTRL_RX PORT_FEATURE_FLOW_CONTROL_RX +#define BNX2X_FLOW_CTRL_BOTH PORT_FEATURE_FLOW_CONTROL_BOTH +#define BNX2X_FLOW_CTRL_NONE PORT_FEATURE_FLOW_CONTROL_NONE #define SPEED_AUTO_NEG 0 #define SPEED_12000 12000 diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index a9c4de0d2020..24d2ae8b74bf 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -1921,10 +1921,10 @@ static void bnx2x_link_report(struct bnx2x *bp) else printk("half duplex"); - if (bp->link_vars.flow_ctrl != FLOW_CTRL_NONE) { - if (bp->link_vars.flow_ctrl & FLOW_CTRL_RX) { + if (bp->link_vars.flow_ctrl != BNX2X_FLOW_CTRL_NONE) { + if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_RX) { printk(", receive "); - if (bp->link_vars.flow_ctrl & FLOW_CTRL_TX) + if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_TX) printk("& transmit "); } else { printk(", transmit "); @@ -1948,11 +1948,11 @@ static u8 bnx2x_initial_phy_init(struct bnx2x *bp) /* It is recommended to turn off RX FC for jumbo frames for better performance */ if (IS_E1HMF(bp)) - bp->link_params.req_fc_auto_adv = FLOW_CTRL_BOTH; + bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_BOTH; else if (bp->dev->mtu > 5000) - bp->link_params.req_fc_auto_adv = FLOW_CTRL_TX; + bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_TX; else - bp->link_params.req_fc_auto_adv = FLOW_CTRL_BOTH; + bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_BOTH; bnx2x_acquire_phy_lock(bp); rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars); @@ -7362,9 +7362,9 @@ static void __devinit bnx2x_link_settings_requested(struct bnx2x *bp) bp->link_params.req_flow_ctrl = (bp->port.link_config & PORT_FEATURE_FLOW_CONTROL_MASK); - if ((bp->link_params.req_flow_ctrl == FLOW_CTRL_AUTO) && + if ((bp->link_params.req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) && !(bp->port.supported & SUPPORTED_Autoneg)) - bp->link_params.req_flow_ctrl = FLOW_CTRL_NONE; + bp->link_params.req_flow_ctrl = BNX2X_FLOW_CTRL_NONE; BNX2X_DEV_INFO("req_line_speed %d req_duplex %d req_flow_ctrl 0x%x" " advertising 0x%x\n", @@ -8353,13 +8353,13 @@ static void bnx2x_get_pauseparam(struct net_device *dev, { struct bnx2x *bp = netdev_priv(dev); - epause->autoneg = (bp->link_params.req_flow_ctrl == FLOW_CTRL_AUTO) && + epause->autoneg = (bp->link_params.req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) && (bp->link_params.req_line_speed == SPEED_AUTO_NEG); - epause->rx_pause = ((bp->link_vars.flow_ctrl & FLOW_CTRL_RX) == - FLOW_CTRL_RX); - epause->tx_pause = ((bp->link_vars.flow_ctrl & FLOW_CTRL_TX) == - FLOW_CTRL_TX); + epause->rx_pause = ((bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_RX) == + BNX2X_FLOW_CTRL_RX); + epause->tx_pause = ((bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_TX) == + BNX2X_FLOW_CTRL_TX); DP(NETIF_MSG_LINK, "ethtool_pauseparam: cmd %d\n" DP_LEVEL " autoneg %d rx_pause %d tx_pause %d\n", @@ -8378,16 +8378,16 @@ static int bnx2x_set_pauseparam(struct net_device *dev, DP_LEVEL " autoneg %d rx_pause %d tx_pause %d\n", epause->cmd, epause->autoneg, epause->rx_pause, epause->tx_pause); - bp->link_params.req_flow_ctrl = FLOW_CTRL_AUTO; + bp->link_params.req_flow_ctrl = BNX2X_FLOW_CTRL_AUTO; if (epause->rx_pause) - bp->link_params.req_flow_ctrl |= FLOW_CTRL_RX; + bp->link_params.req_flow_ctrl |= BNX2X_FLOW_CTRL_RX; if (epause->tx_pause) - bp->link_params.req_flow_ctrl |= FLOW_CTRL_TX; + bp->link_params.req_flow_ctrl |= BNX2X_FLOW_CTRL_TX; - if (bp->link_params.req_flow_ctrl == FLOW_CTRL_AUTO) - bp->link_params.req_flow_ctrl = FLOW_CTRL_NONE; + if (bp->link_params.req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) + bp->link_params.req_flow_ctrl = BNX2X_FLOW_CTRL_NONE; if (epause->autoneg) { if (!(bp->port.supported & SUPPORTED_Autoneg)) { @@ -8396,7 +8396,7 @@ static int bnx2x_set_pauseparam(struct net_device *dev, } if (bp->link_params.req_line_speed == SPEED_AUTO_NEG) - bp->link_params.req_flow_ctrl = FLOW_CTRL_AUTO; + bp->link_params.req_flow_ctrl = BNX2X_FLOW_CTRL_AUTO; } DP(NETIF_MSG_LINK,