From: Boris Brezillon Date: Thu, 26 Apr 2018 16:18:20 +0000 (+0200) Subject: spi: Get rid of the spi_flash_read() API X-Git-Tag: Ubuntu-5.2.0-15.16~4332^2~8 X-Git-Url: https://git.proxmox.com/?a=commitdiff_plain;h=c1f5ba70decfc2f35edcc10505e3e78fb528d212;p=mirror_ubuntu-eoan-kernel.git spi: Get rid of the spi_flash_read() API This API has been replaced by the spi_mem_xx() one, its only user (spi-nor) has been converted to spi_mem_xx() and all SPI controller drivers that were implementing the ->spi_flash_xxx() hooks are also implementing the spi_mem ones. So we can safely get rid of this API. Signed-off-by: Boris Brezillon Reviewed-by: Frieder Schrempf Tested-by: Frieder Schrempf Signed-off-by: Mark Brown --- diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c index 1b12c2ff8be3..c54b760e00ed 100644 --- a/drivers/spi/spi-ti-qspi.c +++ b/drivers/spi/spi-ti-qspi.c @@ -531,44 +531,6 @@ static void ti_qspi_setup_mmap_read(struct spi_device *spi, u8 opcode, QSPI_SPI_SETUP_REG(spi->chip_select)); } -static bool ti_qspi_spi_flash_can_dma(struct spi_device *spi, - struct spi_flash_read_message *msg) -{ - return virt_addr_valid(msg->buf); -} - -static int ti_qspi_spi_flash_read(struct spi_device *spi, - struct spi_flash_read_message *msg) -{ - struct ti_qspi *qspi = spi_master_get_devdata(spi->master); - int ret = 0; - - mutex_lock(&qspi->list_lock); - - if (!qspi->mmap_enabled) - ti_qspi_enable_memory_map(spi); - ti_qspi_setup_mmap_read(spi, msg->read_opcode, msg->data_nbits, - msg->addr_width, msg->dummy_bytes); - - if (qspi->rx_chan) { - if (msg->cur_msg_mapped) - ret = ti_qspi_dma_xfer_sg(qspi, msg->rx_sg, msg->from); - else - ret = ti_qspi_dma_bounce_buffer(qspi, msg->from, - msg->buf, msg->len); - if (ret) - goto err_unlock; - } else { - memcpy_fromio(msg->buf, qspi->mmap_base + msg->from, msg->len); - } - msg->retlen = msg->len; - -err_unlock: - mutex_unlock(&qspi->list_lock); - - return ret; -} - static int ti_qspi_exec_mem_op(struct spi_mem *mem, const struct spi_mem_op *op) { @@ -727,7 +689,6 @@ static int ti_qspi_probe(struct platform_device *pdev) master->dev.of_node = pdev->dev.of_node; master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(16) | SPI_BPW_MASK(8); - master->spi_flash_read = ti_qspi_spi_flash_read; master->mem_ops = &ti_qspi_mem_ops; if (!of_property_read_u32(np, "num-cs", &num_cs)) @@ -827,7 +788,6 @@ static int ti_qspi_probe(struct platform_device *pdev) dma_release_channel(qspi->rx_chan); goto no_dma; } - master->spi_flash_can_dma = ti_qspi_spi_flash_can_dma; master->dma_rx = qspi->rx_chan; init_completion(&qspi->transfer_complete); if (res_mmap) @@ -841,7 +801,6 @@ no_dma: "mmap failed with error %ld using PIO mode\n", PTR_ERR(qspi->mmap_base)); qspi->mmap_base = NULL; - master->spi_flash_read = NULL; master->mem_ops = NULL; } } diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index c85b0cf7b4a9..8ee1ba13eb23 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -3055,63 +3055,6 @@ int spi_async_locked(struct spi_device *spi, struct spi_message *message) } EXPORT_SYMBOL_GPL(spi_async_locked); - -int spi_flash_read(struct spi_device *spi, - struct spi_flash_read_message *msg) - -{ - struct spi_controller *master = spi->controller; - struct device *rx_dev = NULL; - int ret; - - if ((msg->opcode_nbits == SPI_NBITS_DUAL || - msg->addr_nbits == SPI_NBITS_DUAL) && - !(spi->mode & (SPI_TX_DUAL | SPI_TX_QUAD))) - return -EINVAL; - if ((msg->opcode_nbits == SPI_NBITS_QUAD || - msg->addr_nbits == SPI_NBITS_QUAD) && - !(spi->mode & SPI_TX_QUAD)) - return -EINVAL; - if (msg->data_nbits == SPI_NBITS_DUAL && - !(spi->mode & (SPI_RX_DUAL | SPI_RX_QUAD))) - return -EINVAL; - if (msg->data_nbits == SPI_NBITS_QUAD && - !(spi->mode & SPI_RX_QUAD)) - return -EINVAL; - - if (master->auto_runtime_pm) { - ret = pm_runtime_get_sync(master->dev.parent); - if (ret < 0) { - dev_err(&master->dev, "Failed to power device: %d\n", - ret); - return ret; - } - } - - mutex_lock(&master->bus_lock_mutex); - mutex_lock(&master->io_mutex); - if (master->dma_rx && master->spi_flash_can_dma(spi, msg)) { - rx_dev = master->dma_rx->device->dev; - ret = spi_map_buf(master, rx_dev, &msg->rx_sg, - msg->buf, msg->len, - DMA_FROM_DEVICE); - if (!ret) - msg->cur_msg_mapped = true; - } - ret = master->spi_flash_read(spi, msg); - if (msg->cur_msg_mapped) - spi_unmap_buf(master, rx_dev, &msg->rx_sg, - DMA_FROM_DEVICE); - mutex_unlock(&master->io_mutex); - mutex_unlock(&master->bus_lock_mutex); - - if (master->auto_runtime_pm) - pm_runtime_put(master->dev.parent); - - return ret; -} -EXPORT_SYMBOL_GPL(spi_flash_read); - /*-------------------------------------------------------------------------*/ /* Utility methods for SPI protocol drivers, layered on diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index a7e0bbed738c..a64235e05321 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -26,7 +26,6 @@ struct dma_chan; struct property_entry; struct spi_controller; struct spi_transfer; -struct spi_flash_read_message; struct spi_controller_mem_ops; /* @@ -382,11 +381,6 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * controller has native support for memory like operations. * @unprepare_message: undo any work done by prepare_message(). * @slave_abort: abort the ongoing transfer request on an SPI slave controller - * @spi_flash_read: to support spi-controller hardwares that provide - * accelerated interface to read from flash devices. - * @spi_flash_can_dma: analogous to can_dma() interface, but for - * controllers implementing spi_flash_read. - * @flash_read_supported: spi device supports flash read * @cs_gpios: Array of GPIOs to use as chip select lines; one per CS * number. Any individual value may be -ENOENT for CS lines that * are not GPIOs (driven by the SPI controller itself). @@ -552,11 +546,6 @@ struct spi_controller { int (*unprepare_message)(struct spi_controller *ctlr, struct spi_message *message); int (*slave_abort)(struct spi_controller *ctlr); - int (*spi_flash_read)(struct spi_device *spi, - struct spi_flash_read_message *msg); - bool (*spi_flash_can_dma)(struct spi_device *spi, - struct spi_flash_read_message *msg); - bool (*flash_read_supported)(struct spi_device *spi); /* * These hooks are for drivers that use a generic implementation @@ -1190,48 +1179,6 @@ static inline ssize_t spi_w8r16be(struct spi_device *spi, u8 cmd) return be16_to_cpu(result); } -/** - * struct spi_flash_read_message - flash specific information for - * spi-masters that provide accelerated flash read interfaces - * @buf: buffer to read data - * @from: offset within the flash from where data is to be read - * @len: length of data to be read - * @retlen: actual length of data read - * @read_opcode: read_opcode to be used to communicate with flash - * @addr_width: number of address bytes - * @dummy_bytes: number of dummy bytes - * @opcode_nbits: number of lines to send opcode - * @addr_nbits: number of lines to send address - * @data_nbits: number of lines for data - * @rx_sg: Scatterlist for receive data read from flash - * @cur_msg_mapped: message has been mapped for DMA - */ -struct spi_flash_read_message { - void *buf; - loff_t from; - size_t len; - size_t retlen; - u8 read_opcode; - u8 addr_width; - u8 dummy_bytes; - u8 opcode_nbits; - u8 addr_nbits; - u8 data_nbits; - struct sg_table rx_sg; - bool cur_msg_mapped; -}; - -/* SPI core interface for flash read support */ -static inline bool spi_flash_read_supported(struct spi_device *spi) -{ - return spi->controller->spi_flash_read && - (!spi->controller->flash_read_supported || - spi->controller->flash_read_supported(spi)); -} - -int spi_flash_read(struct spi_device *spi, - struct spi_flash_read_message *msg); - /*---------------------------------------------------------------------------*/ /*