From: Peter Chen Date: Wed, 19 Oct 2016 07:32:58 +0000 (+0800) Subject: usb: chipidea: vbus event may exist before starting gadget X-Git-Tag: v4.13~1277^2~21^2~15 X-Git-Url: https://git.proxmox.com/?a=commitdiff_plain;h=c3b674a04b8ab62a1d35e86714d466af0a0ecc18;p=mirror_ubuntu-bionic-kernel.git usb: chipidea: vbus event may exist before starting gadget At some situations, the vbus may already be there before starting gadget. So we need to check vbus event after switching to gadget in order to handle missing vbus event. The typical use cases are plugging vbus cable before driver load or the vbus has already been there after stopping host but before starting gadget. Signed-off-by: Peter Chen Tested-by: Stephen Boyd Reported-by: Stephen Boyd --- diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c index 695f3fe3ae21..10236fe71522 100644 --- a/drivers/usb/chipidea/otg.c +++ b/drivers/usb/chipidea/otg.c @@ -134,9 +134,9 @@ void ci_handle_vbus_change(struct ci_hdrc *ci) if (!ci->is_otg) return; - if (hw_read_otgsc(ci, OTGSC_BSV)) + if (hw_read_otgsc(ci, OTGSC_BSV) && !ci->vbus_active) usb_gadget_vbus_connect(&ci->gadget); - else + else if (!hw_read_otgsc(ci, OTGSC_BSV) && ci->vbus_active) usb_gadget_vbus_disconnect(&ci->gadget); } @@ -175,14 +175,21 @@ static void ci_handle_id_switch(struct ci_hdrc *ci) ci_role_stop(ci); - if (role == CI_ROLE_GADGET) + if (role == CI_ROLE_GADGET && + IS_ERR(ci->platdata->vbus_extcon.edev)) /* - * wait vbus lower than OTGSC_BSV before connecting - * to host + * Wait vbus lower than OTGSC_BSV before connecting + * to host. If connecting status is from an external + * connector instead of register, we don't need to + * care vbus on the board, since it will not affect + * external connector status. */ hw_wait_vbus_lower_bsv(ci); ci_role_start(ci, role); + /* vbus change may have already occurred */ + if (role == CI_ROLE_GADGET) + ci_handle_vbus_change(ci); } } /**