From: Mike Rapoport Date: Wed, 10 Jun 2020 06:57:50 +0000 (+0300) Subject: i2c/buses: remove i2c-puv3 driver X-Git-Tag: Ubuntu-5.10.0-12.13~2285^2~5 X-Git-Url: https://git.proxmox.com/?a=commitdiff_plain;h=c59e68250c4b317c99f1d1a1e8f990fd8e608afd;p=mirror_ubuntu-hirsute-kernel.git i2c/buses: remove i2c-puv3 driver The unicore32 port is removed from the kernel. There is no point to keep stale i2c bus driver for this architecture. Signed-off-by: Mike Rapoport Acked-by: Arnd Bergmann Acked-by: Guenter Roeck --- diff --git a/MAINTAINERS b/MAINTAINERS index 1de95aa44bbb..ec65e063e258 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13585,7 +13585,6 @@ M: Guan Xuetao S: Maintained W: http://mprc.pku.edu.cn/~guanxuetao/linux T: git git://github.com/gxt/linux.git -F: drivers/i2c/busses/i2c-puv3.c F: drivers/input/serio/i8042-unicore32io.h F: drivers/rtc/rtc-puv3.c F: drivers/video/fbdev/fb-puv3.c diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 735bf31a3fdf..88639e52c73a 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -866,17 +866,6 @@ config I2C_PNX This driver can also be built as a module. If so, the module will be called i2c-pnx. -config I2C_PUV3 - tristate "PKUnity v3 I2C bus support" - depends on UNICORE32 && ARCH_PUV3 - select I2C_ALGOBIT - help - This driver supports the I2C IP inside the PKUnity-v3 SoC. - This I2C bus controller is under AMBA/AXI bus. - - This driver can also be built as a module. If so, the module - will be called i2c-puv3. - config I2C_PXA tristate "Intel PXA2XX I2C adapter" depends on ARCH_PXA || ARCH_MMP || ARCH_MVEBU || (X86_32 && PCI && OF) || COMPILE_TEST diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 306d5dc3f417..19aff0e45cb5 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -88,7 +88,6 @@ obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o obj-$(CONFIG_I2C_PCA_PLATFORM) += i2c-pca-platform.o obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o obj-$(CONFIG_I2C_PNX) += i2c-pnx.o -obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o obj-$(CONFIG_I2C_PXA) += i2c-pxa.o obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o obj-$(CONFIG_I2C_QCOM_CCI) += i2c-qcom-cci.o diff --git a/drivers/i2c/busses/i2c-puv3.c b/drivers/i2c/busses/i2c-puv3.c deleted file mode 100644 index 5cec5a36807d..000000000000 --- a/drivers/i2c/busses/i2c-puv3.c +++ /dev/null @@ -1,275 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * I2C driver for PKUnity-v3 SoC - * Code specific to PKUnity SoC and UniCore ISA - * - * Maintained by GUAN Xue-tao - * Copyright (C) 2001-2010 Guan Xuetao - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * Poll the i2c status register until the specified bit is set. - * Returns 0 if timed out (100 msec). - */ -static short poll_status(unsigned long bit) -{ - int loop_cntr = 1000; - - if (bit & I2C_STATUS_TFNF) { - do { - udelay(10); - } while (!(readl(I2C_STATUS) & bit) && (--loop_cntr > 0)); - } else { - /* RXRDY handler */ - do { - if (readl(I2C_TAR) == I2C_TAR_EEPROM) - msleep(20); - else - udelay(10); - } while (!(readl(I2C_RXFLR) & 0xf) && (--loop_cntr > 0)); - } - - return (loop_cntr > 0); -} - -static int xfer_read(struct i2c_adapter *adap, unsigned char *buf, int length) -{ - int i2c_reg = *buf; - - /* Read data */ - while (length--) { - if (!poll_status(I2C_STATUS_TFNF)) { - dev_dbg(&adap->dev, "Tx FIFO Not Full timeout\n"); - return -ETIMEDOUT; - } - - /* send addr */ - writel(i2c_reg | I2C_DATACMD_WRITE, I2C_DATACMD); - - /* get ready to next write */ - i2c_reg++; - - /* send read CMD */ - writel(I2C_DATACMD_READ, I2C_DATACMD); - - /* wait until the Rx FIFO have available */ - if (!poll_status(I2C_STATUS_RFNE)) { - dev_dbg(&adap->dev, "RXRDY timeout\n"); - return -ETIMEDOUT; - } - - /* read the data to buf */ - *buf = (readl(I2C_DATACMD) & I2C_DATACMD_DAT_MASK); - buf++; - } - - return 0; -} - -static int xfer_write(struct i2c_adapter *adap, unsigned char *buf, int length) -{ - int i2c_reg = *buf; - - /* Do nothing but storing the reg_num to a static variable */ - if (i2c_reg == -1) { - printk(KERN_WARNING "Error i2c reg\n"); - return -ETIMEDOUT; - } - - if (length == 1) - return 0; - - buf++; - length--; - while (length--) { - /* send addr */ - writel(i2c_reg | I2C_DATACMD_WRITE, I2C_DATACMD); - - /* send write CMD */ - writel(*buf | I2C_DATACMD_WRITE, I2C_DATACMD); - - /* wait until the Rx FIFO have available */ - msleep(20); - - /* read the data to buf */ - i2c_reg++; - buf++; - } - - return 0; -} - -/* - * Generic i2c master transfer entrypoint. - * - */ -static int puv3_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *pmsg, - int num) -{ - int i, ret; - unsigned char swap; - - /* Disable i2c */ - writel(I2C_ENABLE_DISABLE, I2C_ENABLE); - - /* Set the work mode and speed*/ - writel(I2C_CON_MASTER | I2C_CON_SPEED_STD | I2C_CON_SLAVEDISABLE, I2C_CON); - - writel(pmsg->addr, I2C_TAR); - - /* Enable i2c */ - writel(I2C_ENABLE_ENABLE, I2C_ENABLE); - - dev_dbg(&adap->dev, "puv3_i2c_xfer: processing %d messages:\n", num); - - for (i = 0; i < num; i++) { - dev_dbg(&adap->dev, " #%d: %sing %d byte%s %s 0x%02x\n", i, - pmsg->flags & I2C_M_RD ? "read" : "writ", - pmsg->len, pmsg->len > 1 ? "s" : "", - pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr); - - if (pmsg->len && pmsg->buf) { /* sanity check */ - if (pmsg->flags & I2C_M_RD) - ret = xfer_read(adap, pmsg->buf, pmsg->len); - else - ret = xfer_write(adap, pmsg->buf, pmsg->len); - - if (ret) - return ret; - - } - dev_dbg(&adap->dev, "transfer complete\n"); - pmsg++; /* next message */ - } - - /* XXX: fixup be16_to_cpu in bq27x00_battery.c */ - if (pmsg->addr == I2C_TAR_PWIC) { - swap = pmsg->buf[0]; - pmsg->buf[0] = pmsg->buf[1]; - pmsg->buf[1] = swap; - } - - return i; -} - -/* - * Return list of supported functionality. - */ -static u32 puv3_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; -} - -static const struct i2c_algorithm puv3_i2c_algorithm = { - .master_xfer = puv3_i2c_xfer, - .functionality = puv3_i2c_func, -}; - -/* - * Main initialization routine. - */ -static int puv3_i2c_probe(struct platform_device *pdev) -{ - struct i2c_adapter *adapter; - struct resource *mem; - int rc; - - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem) - return -ENODEV; - - if (!request_mem_region(mem->start, resource_size(mem), "puv3_i2c")) - return -EBUSY; - - adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL); - if (adapter == NULL) { - dev_err(&pdev->dev, "can't allocate interface!\n"); - rc = -ENOMEM; - goto fail_nomem; - } - snprintf(adapter->name, sizeof(adapter->name), "PUV3-I2C at 0x%08x", - mem->start); - adapter->algo = &puv3_i2c_algorithm; - adapter->class = I2C_CLASS_HWMON; - adapter->dev.parent = &pdev->dev; - - platform_set_drvdata(pdev, adapter); - - adapter->nr = pdev->id; - rc = i2c_add_numbered_adapter(adapter); - if (rc) - goto fail_add_adapter; - - dev_info(&pdev->dev, "PKUnity v3 i2c bus adapter.\n"); - return 0; - -fail_add_adapter: - kfree(adapter); -fail_nomem: - release_mem_region(mem->start, resource_size(mem)); - - return rc; -} - -static int puv3_i2c_remove(struct platform_device *pdev) -{ - struct i2c_adapter *adapter = platform_get_drvdata(pdev); - struct resource *mem; - - i2c_del_adapter(adapter); - - put_device(&pdev->dev); - - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(mem->start, resource_size(mem)); - - return 0; -} - -#ifdef CONFIG_PM_SLEEP -static int puv3_i2c_suspend(struct device *dev) -{ - int poll_count; - /* Disable the IIC */ - writel(I2C_ENABLE_DISABLE, I2C_ENABLE); - for (poll_count = 0; poll_count < 50; poll_count++) { - if (readl(I2C_ENSTATUS) & I2C_ENSTATUS_ENABLE) - udelay(25); - } - - return 0; -} - -static SIMPLE_DEV_PM_OPS(puv3_i2c_pm, puv3_i2c_suspend, NULL); -#define PUV3_I2C_PM (&puv3_i2c_pm) - -#else -#define PUV3_I2C_PM NULL -#endif - -static struct platform_driver puv3_i2c_driver = { - .probe = puv3_i2c_probe, - .remove = puv3_i2c_remove, - .driver = { - .name = "PKUnity-v3-I2C", - .pm = PUV3_I2C_PM, - } -}; - -module_platform_driver(puv3_i2c_driver); - -MODULE_DESCRIPTION("PKUnity v3 I2C driver"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:puv3_i2c");