From: Alan Stern Date: Wed, 11 Jul 2012 15:22:26 +0000 (-0400) Subject: USB: EHCI: use hrtimer for interrupt QH unlink X-Git-Tag: Ubuntu-5.2.0-15.16~17545^2~37 X-Git-Url: https://git.proxmox.com/?a=commitdiff_plain;h=df2022553dd8d34d49e16c19d851ea619438f0ef;p=mirror_ubuntu-eoan-kernel.git USB: EHCI: use hrtimer for interrupt QH unlink This patch (as1577) adds hrtimer support for unlinking interrupt QHs in ehci-hcd. The current code relies on a fixed delay of either 2 or 55 us, which is not always adequate and in any case is totally bogus. Thanks to internal caching, the EHCI hardware may continue to access an interrupt QH for more than a millisecond after it has been unlinked. In fact, the EHCI spec doesn't say how long to wait before using an unlinked interrupt QH. The patch sets the delay to 9 microframes minimum, which ought to be adequate. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 21d6fbc0a327..edcfd2c4295e 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -309,6 +309,8 @@ static void ehci_quiesce (struct ehci_hcd *ehci) static void end_unlink_async(struct ehci_hcd *ehci); static void ehci_work(struct ehci_hcd *ehci); +static void start_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh); +static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh); #include "ehci-timer.c" #include "ehci-hub.c" @@ -1034,7 +1036,7 @@ static int ehci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) switch (qh->qh_state) { case QH_STATE_LINKED: case QH_STATE_COMPLETING: - intr_deschedule (ehci, qh); + start_unlink_intr(ehci, qh); break; case QH_STATE_IDLE: qh_completions (ehci, qh); @@ -1164,7 +1166,7 @@ ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep) if (eptype == USB_ENDPOINT_XFER_BULK) unlink_async(ehci, qh); else - intr_deschedule(ehci, qh); + start_unlink_intr(ehci, qh); } } spin_unlock_irqrestore(&ehci->lock, flags); diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 25329e4b844f..8aa740dc510d 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -302,6 +302,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) if (ehci->async_unlink) end_unlink_async(ehci); + ehci_handle_intr_unlinks(ehci); /* allow remote wakeup */ mask = INTR_MASK; diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index 69b1861e4325..eec8446f8ded 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -578,12 +578,20 @@ static void qh_unlink_periodic(struct ehci_hcd *ehci, struct ehci_qh *qh) unsigned i; unsigned period; - // FIXME: - // IF this isn't high speed - // and this qh is active in the current uframe - // (and overlay token SplitXstate is false?) - // THEN - // qh->hw_info1 |= cpu_to_hc32(1 << 7 /* "ignore" */); + /* + * If qh is for a low/full-speed device, simply unlinking it + * could interfere with an ongoing split transaction. To unlink + * it safely would require setting the QH_INACTIVATE bit and + * waiting at least one frame, as described in EHCI 4.12.2.5. + * + * We won't bother with any of this. Instead, we assume that the + * only reason for unlinking an interrupt QH while the current URB + * is still active is to dequeue all the URBs (flush the whole + * endpoint queue). + * + * If rebalancing the periodic schedule is ever implemented, this + * approach will no longer be valid. + */ /* high bandwidth, or otherwise part of every microframe */ if ((period = qh->period) == 0) @@ -608,12 +616,8 @@ static void qh_unlink_periodic(struct ehci_hcd *ehci, struct ehci_qh *qh) qh->qh_next.ptr = NULL; } -static void intr_deschedule (struct ehci_hcd *ehci, struct ehci_qh *qh) +static void start_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh) { - unsigned wait; - struct ehci_qh_hw *hw = qh->hw; - int rc; - /* If the QH isn't linked then there's nothing we can do * unless we were called during a giveback, in which case * qh_completions() has to deal with it. @@ -626,28 +630,45 @@ static void intr_deschedule (struct ehci_hcd *ehci, struct ehci_qh *qh) qh_unlink_periodic (ehci, qh); - /* simple/paranoid: always delay, expecting the HC needs to read - * qh->hw_next or finish a writeback after SPLIT/CSPLIT ... and - * expect khubd to clean up after any CSPLITs we won't issue. - * active high speed queues may need bigger delays... + /* Make sure the unlinks are visible before starting the timer */ + wmb(); + + /* + * The EHCI spec doesn't say how long it takes the controller to + * stop accessing an unlinked interrupt QH. The timer delay is + * 9 uframes; presumably that will be long enough. */ - if (list_empty (&qh->qtd_list) - || (cpu_to_hc32(ehci, QH_CMASK) - & hw->hw_info2) != 0) - wait = 2; + qh->unlink_cycle = ehci->intr_unlink_cycle; + + /* New entries go at the end of the intr_unlink list */ + if (ehci->intr_unlink) + ehci->intr_unlink_last->unlink_next = qh; else - wait = 55; /* worst case: 3 * 1024 */ + ehci->intr_unlink = qh; + ehci->intr_unlink_last = qh; + + if (ehci->intr_unlinking) + ; /* Avoid recursive calls */ + else if (ehci->rh_state < EHCI_RH_RUNNING) + ehci_handle_intr_unlinks(ehci); + else if (ehci->intr_unlink == qh) { + ehci_enable_event(ehci, EHCI_HRTIMER_UNLINK_INTR, true); + ++ehci->intr_unlink_cycle; + } +} + +static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh) +{ + struct ehci_qh_hw *hw = qh->hw; + int rc; - udelay (wait); qh->qh_state = QH_STATE_IDLE; hw->hw_next = EHCI_LIST_END(ehci); - wmb (); qh_completions(ehci, qh); /* reschedule QH iff another request is queued */ - if (!list_empty(&qh->qtd_list) && - ehci->rh_state == EHCI_RH_RUNNING) { + if (!list_empty(&qh->qtd_list) && ehci->rh_state == EHCI_RH_RUNNING) { rc = qh_schedule(ehci, qh); /* An error here likely indicates handshake failure @@ -2302,7 +2323,7 @@ restart: temp.qh->stamp = ehci->periodic_stamp; if (unlikely(list_empty(&temp.qh->qtd_list) || temp.qh->needs_rescan)) - intr_deschedule(ehci, temp.qh); + start_unlink_intr(ehci, temp.qh); } break; case Q_TYPE_FSTN: diff --git a/drivers/usb/host/ehci-timer.c b/drivers/usb/host/ehci-timer.c index 1e907dd3bb1b..bd8b591771b0 100644 --- a/drivers/usb/host/ehci-timer.c +++ b/drivers/usb/host/ehci-timer.c @@ -69,6 +69,7 @@ static void ehci_clear_command_bit(struct ehci_hcd *ehci, u32 bit) static unsigned event_delays_ns[] = { 1 * NSEC_PER_MSEC, /* EHCI_HRTIMER_POLL_ASS */ 1 * NSEC_PER_MSEC, /* EHCI_HRTIMER_POLL_PSS */ + 1125 * NSEC_PER_USEC, /* EHCI_HRTIMER_UNLINK_INTR */ 10 * NSEC_PER_MSEC, /* EHCI_HRTIMER_DISABLE_PERIODIC */ 15 * NSEC_PER_MSEC, /* EHCI_HRTIMER_DISABLE_ASYNC */ }; @@ -192,6 +193,38 @@ static void ehci_disable_PSE(struct ehci_hcd *ehci) } +/* Handle unlinked interrupt QHs once they are gone from the hardware */ +static void ehci_handle_intr_unlinks(struct ehci_hcd *ehci) +{ + bool stopped = (ehci->rh_state < EHCI_RH_RUNNING); + + /* + * Process all the QHs on the intr_unlink list that were added + * before the current unlink cycle began. The list is in + * temporal order, so stop when we reach the first entry in the + * current cycle. But if the root hub isn't running then + * process all the QHs on the list. + */ + ehci->intr_unlinking = true; + while (ehci->intr_unlink) { + struct ehci_qh *qh = ehci->intr_unlink; + + if (!stopped && qh->unlink_cycle == ehci->intr_unlink_cycle) + break; + ehci->intr_unlink = qh->unlink_next; + qh->unlink_next = NULL; + end_unlink_intr(ehci, qh); + } + + /* Handle remaining entries later */ + if (ehci->intr_unlink) { + ehci_enable_event(ehci, EHCI_HRTIMER_UNLINK_INTR, true); + ++ehci->intr_unlink_cycle; + } + ehci->intr_unlinking = false; +} + + /* * Handler functions for the hrtimer event types. * Keep this array in the same order as the event types indexed by @@ -200,6 +233,7 @@ static void ehci_disable_PSE(struct ehci_hcd *ehci) static void (*event_handlers[])(struct ehci_hcd *) = { ehci_poll_ASS, /* EHCI_HRTIMER_POLL_ASS */ ehci_poll_PSS, /* EHCI_HRTIMER_POLL_PSS */ + ehci_handle_intr_unlinks, /* EHCI_HRTIMER_UNLINK_INTR */ ehci_disable_PSE, /* EHCI_HRTIMER_DISABLE_PERIODIC */ ehci_disable_ASE, /* EHCI_HRTIMER_DISABLE_ASYNC */ }; diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index bf06bbb77ba4..f36f1f85d7fd 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -81,6 +81,7 @@ enum ehci_rh_state { enum ehci_hrtimer_event { EHCI_HRTIMER_POLL_ASS, /* Poll for async schedule off */ EHCI_HRTIMER_POLL_PSS, /* Poll for periodic schedule off */ + EHCI_HRTIMER_UNLINK_INTR, /* Wait for interrupt QH unlink */ EHCI_HRTIMER_DISABLE_PERIODIC, /* Wait to disable periodic sched */ EHCI_HRTIMER_DISABLE_ASYNC, /* Wait to disable async sched */ EHCI_HRTIMER_NUM_EVENTS /* Must come last */ @@ -106,13 +107,16 @@ struct ehci_hcd { /* one per controller */ spinlock_t lock; enum ehci_rh_state rh_state; + /* general schedule support */ + unsigned scanning:1; + bool intr_unlinking:1; + /* async schedule support */ struct ehci_qh *async; struct ehci_qh *dummy; /* For AMD quirk use */ struct ehci_qh *async_unlink; struct ehci_qh *async_unlink_last; struct ehci_qh *qh_scan_next; - unsigned scanning : 1; unsigned async_count; /* async activity count */ /* periodic schedule support */ @@ -123,6 +127,9 @@ struct ehci_hcd { /* one per controller */ unsigned i_thresh; /* uframes HC might cache */ union ehci_shadow *pshadow; /* mirror hw periodic table */ + struct ehci_qh *intr_unlink; + struct ehci_qh *intr_unlink_last; + unsigned intr_unlink_cycle; int next_uframe; /* scan periodic, start here */ unsigned periodic_count; /* periodic activity count */ unsigned uframe_periodic_max; /* max periodic time per uframe */ @@ -385,6 +392,7 @@ struct ehci_qh { struct ehci_qh *unlink_next; /* next on unlink list */ unsigned long unlink_time; + unsigned unlink_cycle; unsigned stamp; u8 needs_rescan; /* Dequeue during giveback */