From: Stephen Warren Date: Tue, 3 Jan 2012 12:05:47 +0000 (+0000) Subject: ARM: tegra: Support Tegra30 in decompressor UART setup X-Git-Tag: Ubuntu-5.13.0-19.19~25027^2~11^2~13 X-Git-Url: https://git.proxmox.com/?a=commitdiff_plain;h=e53b7d87cc375fbe428551651094fb676764aae3;p=mirror_ubuntu-jammy-kernel.git ARM: tegra: Support Tegra30 in decompressor UART setup On Tegra20, the UART clock runs at 216MHz, whereas on Tegra30 it runs at 408MHz. Modify arch_decomp_setup() to detect Tegra20-vs-Tegra30 at run- time, and program the correct divisor. This makes uncompressor messages work correctly on Tegra30. This also fixes early printk, assuming zImage is used and this setup code runs. v2: Use CHIPID register to differentiate between chips, rather than a GIC register. This should be more future-proof. Volatile is required to prevent the compiler transforming the 32-bit apb_misc register read into an 8-bit read of address 1 higher, since the HW only supports 32- bit accesses, and will hang on an 8-bit access. Signed-off-by: Stephen Warren Signed-off-by: Olof Johansson --- diff --git a/arch/arm/mach-tegra/include/mach/uncompress.h b/arch/arm/mach-tegra/include/mach/uncompress.h index 4e8323770c79..39bd5e5a1afd 100644 --- a/arch/arm/mach-tegra/include/mach/uncompress.h +++ b/arch/arm/mach-tegra/include/mach/uncompress.h @@ -45,15 +45,23 @@ static inline void flush(void) static inline void arch_decomp_setup(void) { + volatile u32 *apb_misc = (volatile u32 *)TEGRA_APB_MISC_BASE; + u32 chip, div; volatile u8 *uart = (volatile u8 *)TEGRA_DEBUG_UART_BASE; int shift = 2; if (uart == NULL) return; + chip = (apb_misc[0x804 / 4] >> 8) & 0xff; + if (chip == 0x20) + div = 0x0075; + else + div = 0x00dd; + uart[UART_LCR << shift] |= UART_LCR_DLAB; - uart[UART_DLL << shift] = 0x75; - uart[UART_DLM << shift] = 0x0; + uart[UART_DLL << shift] = div & 0xff; + uart[UART_DLM << shift] = div >> 8; uart[UART_LCR << shift] = 3; }