David Lamparter [Mon, 26 Sep 2016 16:36:49 +0000 (18:36 +0200)]
lib: vty: add infrastructure for qobj ID "index"
As mentioned in previous commits, this prepares to replace the vty's
"void *index" context position with a safe qobj pointer. This will
allow concurrent configuration editing by multiple users, as soon as no
more code (library included) in the daemon uses vty->index anymore.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
David Lamparter [Mon, 26 Sep 2016 15:30:30 +0000 (17:30 +0200)]
lib: add "qobj" object-ID infrastructure
This adds 64-bit random identifiers as "safe pointers" which are also
type-tracked / can have type-specific extension methods.
This will be used by both the CLI (to keep safe references while in
config editing mode) as well as the Cap'n Proto code (to hand out
pointers to the user in a safe way and add per-type handlers)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Lou Berger [Sat, 7 May 2016 18:18:56 +0000 (14:18 -0400)]
bgpd: add L3/L2VPN Virtual Network Control feature
This feature adds an L3 & L2 VPN application that makes use of the VPN
and Encap SAFIs. This code is currently used to support IETF NVO3 style
operation. In NVO3 terminology it provides the Network Virtualization
Authority (NVA) and the ability to import/export IP prefixes and MAC
addresses from Network Virtualization Edges (NVEs). The code supports
per-NVE tables.
The NVE-NVA protocol used to communicate routing and Ethernet / Layer 2
(L2) forwarding information between NVAs and NVEs is referred to as the
Remote Forwarder Protocol (RFP). OpenFlow is an example RFP. For
general background on NVO3 and RFP concepts see [1]. For information on
Openflow see [2].
RFPs are integrated with BGP via the RF API contained in the new "rfapi"
BGP sub-directory. Currently, only a simple example RFP is included in
Quagga. Developers may use this example as a starting point to integrate
Quagga with an RFP of their choosing, e.g., OpenFlow. The RFAPI code
also supports the ability import/export of routing information between
VNC and customer edge routers (CEs) operating within a virtual
network. Import/export may take place between BGP views or to the
default zebera VRF.
BGP, with IP VPNs and Tunnel Encapsulation, is used to distribute VPN
information between NVAs. BGP based IP VPN support is defined in
RFC4364, BGP/MPLS IP Virtual Private Networks (VPNs), and RFC4659,
BGP-MPLS IP Virtual Private Network (VPN) Extension for IPv6 VPN . Use
of both the Encapsulation Subsequent Address Family Identifier (SAFI)
and the Tunnel Encapsulation Attribute, RFC5512, The BGP Encapsulation
Subsequent Address Family Identifier (SAFI) and the BGP Tunnel
Encapsulation Attribute, are supported. MAC address distribution does
not follow any standard BGB encoding, although it was inspired by the
early IETF EVPN concepts.
The feature is conditionally compiled and disabled by default.
Use the --enable-bgp-vnc configure option to enable.
The majority of this code was authored by G. Paul Ziemba
<paulz@labn.net>.
Timo Teräs [Fri, 15 Jan 2016 15:36:31 +0000 (17:36 +0200)]
zebra: support FIB override routes
FIB override routes are for routing protocols that establish
shortcut routes, or establish point-to-point routes that should
not be redistributed. Namely this is useful NHRP daemon to come.
Zebra is extended to select two entries from RIB the "best" entry
from routing protocols, and the FIB entry to install to kernel.
FIB override routes are never selected as best entry, and thus
are never adverticed to other routing daemons. The best FIB
override, or if it does not exist the otherwise best RIB is
selected as FIB entry to be installed.
Signed-off-by: Timo Teräs <timo.teras@iki.fi> Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: Massage to fit cumulus tree] Signed-off-by: Christian Franke <chris@opensourcerouting.org>
ldpd: always advertise labels upon receiving a redistributed route
Whenever a routing daemon advertises a new version of a route to zebra,
zebra removes the old version of this route (implicit withdraw) and then
create a new 'rib' structure for the new version of the route.
In this process, the previously received label(s) from ldpd are lost. This
is because upon receiving a ZEBRA_MPLS_LABELS_ADD message, zebra only
adds a label to a nexthop of an existing route. And routes are volatile,
they can be removed while being updated.
To workaround this issue, this patch makes ldpd always advertise the
appropriate labels whenever it receives a redistributed route, even
if it was already received before (an older version). This way, when
ldpd receives the updated version of a route, it will readvertise the
appropriate label(s) and zebra will reinstall them.
Commit 5048fe changed the way zebra behave when a route is updated. Now,
whenever a route is changed, zebra advertises its new version without
withdrawing the old one. This patch adapts ldpd to understand this new
behavior. After processing a ZEBRA_REDISTRIBUTE_IPV[46]_ADD message,
we need to check for nexthops that were removed and, for each of them
(if any), withdraw the associated labels from zebra.
David Lamparter [Wed, 16 Dec 2015 18:38:23 +0000 (19:38 +0100)]
lib: fix vrf_bitmap leak in zclient_free()
zclient_stop(), which is used as antagonist to zclient_init(), needs to
undo the vrf_bitmap allocation. Otherwise zclient_init() will leak the
allocated memory, for example when zclient_reset() is used.
Reported-by: Lou Berger <lberger@labn.net> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Daniel Walton [Tue, 27 Sep 2016 15:56:36 +0000 (15:56 +0000)]
tools: quagga-reload should raise Exception instead of exiting
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com> Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
NCLU imports quagga-reload.py and uses its Config class to parse
Quagga.conf. The Config class will call 'vtysh -m -f Quagga.conf" and
if that exited with an error Config would call sys.exit(1) which in my
cases causes the NCLU daemon to exit which is bad. The fix is to have
the Config class raise an exception instead of exiting, then NCLU can
catch the exception, log it and move on.
Daniel Walton [Tue, 27 Sep 2016 15:57:56 +0000 (15:57 +0000)]
zebra: "ip import-table" display is hosed
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com> Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Ticket: CM-13020
Now that we have evpn we have the following AFIs
/* Address family numbers from RFC1700. */
typedef enum {
AFI_IP = 1,
AFI_IP6 = 2,
AFI_ETHER = 3, /* RFC 1700 has "6" for 802.* */
AFI_MAX = 4
} afi_t;
The import-table code was treating the afi as a flag which was fine
before when the only choices were 1 and 2 but now that we have #3 that
doesn't work. The fix is to change zebra_import_table_used to a
[AFI_MAX][ZEBRA_KERNEL_TABLE_MAX] array to track if import-table is
enabled.
Daniel Walton [Tue, 27 Sep 2016 15:56:36 +0000 (15:56 +0000)]
tools: quagga-reload should raise Exception instead of exiting
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com> Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
NCLU imports quagga-reload.py and uses its Config class to parse
Quagga.conf. The Config class will call 'vtysh -m -f Quagga.conf" and
if that exited with an error Config would call sys.exit(1) which in my
cases causes the NCLU daemon to exit which is bad. The fix is to have
the Config class raise an exception instead of exiting, then NCLU can
catch the exception, log it and move on.
distribute.c doesn't allow to manage both v4 and v6 distribute lists. This
patch fix this problem by having 4 DISTRIBUTE* values in the enumeration instead
of two. The code in all daemons using distribute.c is adapted.
Paul Jakma [Tue, 9 Feb 2016 15:23:03 +0000 (15:23 +0000)]
lib: Check prefix length from zebra is sensible
* zclient.c: prefix length on router-id and interface address add
messages not sanity checked. fix.
* */*_zebra.c: Prefix length on zebra route read was not checked, and
clients use it to write to storage. An evil zebra could overflow
client structures by sending overly long prefixlen.
Avneesh Sachdev [Fri, 11 Mar 2016 20:21:26 +0000 (12:21 -0800)]
zebra: add developer test functions for FPM code
Add test functions for the zebra code that interfaces with the
Forwarding Plane Manager. These functions can be invoked in a
development build via the recently-added 'invoke' command.
For example:
# invoke zebra function zfpm_dt_benchmark_protobuf_encode 100000
Changes:
* zebra/zebra_fpm_dt.c
Add the following functions. Each function encodes or decodes a
route in a particular FPM format a specified number of times.
Avneesh Sachdev [Fri, 11 Mar 2016 20:21:24 +0000 (12:21 -0800)]
build: support for "development build"
* configure.ac
Add the --enable-dev-build flag. It controls the DEV_BUILD
define for autoconf and automake, which can be used to
conditionally build in code that is only intended for development..
Modify configure.ac to disable portability warnings for automake --
our automake code (in particular common.am) uses some constructs
specific to gmake.
Infrastructure that allows protocol buffers to be used in Quagga. The
changes below comprise of:
- Build hooks
- Protobuf definitions for common types.
- Library routines for working with protobuf, including functions
that help translate between common quagga types and their protobuf
equivalents.
Changes:
* qpb/{Makefile.am,README.txt,qpb.h,.gitignore}
Add the qpb library, which provides shared code and definitions
for using protocol buffers in quagga code.
* qpb/qpb.proto
Protobuf definitions that can be shared by all of quagga.
* qpb/linear_allocator.h
An allocator that allocates memory by walking down towards the end
of a buffer. This is used to cheaply allocate/deallocate memory on
the stack for protobuf operations.
* qpb/qpb_allocator.[ch]
Thin layer that allows a linear allocator to be used with the
protobuf-c library.
* common.am
This is an automake fragment that is intended to be shared by
Makefile.am files in the tree. It currently includes definitions
related to protobuf.
* configure.ac
- Add logic to optionally build protobuf code.
By default, protobuf support is enabled if the protobuf C
compiler (protoc-c) is available, and the associated header
files/library can be found.
The user can choose to override this behavior via the new
--disable-protobuf/--enable-protobuf flags.
- Include the quagga protobuf library (qpb) in the build.
* .gitignore
Ignore source code generated by protobuf compiler.
* Makefile.am
Add 'qpb' to the list of subdirectories.
Signed-off-by: Avneesh Sachdev <avneesh@sproute.com>
Edited: Paul Jakma <paul.jakma@hpe.com>: Change the sense of the
configure enable option to require explicit specifying, as
an experimental feature.
David Lamparter [Tue, 16 Feb 2016 18:50:15 +0000 (19:50 +0100)]
isisd: fix assert warning
icc (the Intel C Compiler) "knows" that assert() can be disabled by
setting specific optimisation flags, and therefore emits a warning about
missing a return value after an "always-error" assert.
Workaround by returning a value - this probably needs discussion and a
better fix (for all places where the code needs to abort due to internal
errors).
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
zebra: Enable fpm module to connect to remote fpm server
FPM aims to provide cross platform mechanism to support the scenario
where the router has forwarding path distinct fromt the kernel.Commonly
Hardware based fast path.Hence it is non-configurable paramter.This
limits us to use funcationality to update FIB information to remote
hosts, like SDN controller.
This implementation provides the CLI to configure remote hosts and port
information of remote fpm controller.Otherwise default fpm server will
be localhost and default fpm port will be well know port 2620.
* zebra_fpm.c: added fpm_server paramter to zfpm_global_t handler.
Implemented CLI for configuring the fpm server and no fpm
command to revert back to default configuration.
* zserv.c: Install zebra node to write fpm configuration info
on console/config file.
Further documentation supplied:
-------------------------------
ZEBRA : CLI CONFIGURATION FOR FPM MODULE
========================================================
This memo discusses the configuration option for zebra to update
FIB information to local and remote modules.
This will also helps to address the issue associated with CORD project.
https://jira.onosproject.org/browse/CORD-411
2. REFERENCE
================================
Quagga version 99.24+ ( main branch committed on 29-sep-2015)
3. PROBLEM DESCRIPTION
================================
Once FPM is enabled, Quagga periodically tries to initiate fpm
connection to localhost:2620. These values are non configurable in
existing implementation. There is no CLI available to configure
"host:port". hence limits us to use it for hardware based fast path
modules only.
4. PROPOSED CHANGES
================================
Following changes are done to the quagga code
a) Added new CLI to configure "host address : port".
The CLI format
<conf t>
$ fpm connection ip <ipv4 address> port <tcp port num>
and no fpm command to revert back to default
<conf t>
$ no fpm connection ip <ipv4 address> port <tcp port num>
b) Allowed values are ipv4 address and tcp port range <1-65535>
c) FPM initialization code has been enhanced to pick the "host
address : port" values from zebra.conf. if not found then
default values as localhost:2620 will be used. and updated the
information on to config file on write config command
5. FILES MODIFIED
================================
1) fpm/fpm.h :
a) Added MACRO to represent network order loopback ip
2) zebra/zebra_fpm.h :
a) introduced fpm_server variable in zfpm_glob_t handler to hold
the remote fpm server address
b) Hooked 'fpm_remote_ip_cmd' and 'no_fpm_remote_ip_cmd' at CONFIG
node to configure remote fpm detail and to revert back to
default respectively
3) zebra/zserv.c :
a) Hooked 'config_write_fpm' callback function, at ZEBRA_NODE to
display the fpm connection details on console on entering
command
$ show running_config
and to write to configuration file on entering command
$ write config
In default configuration FPM will attempt to connect to
localhost:2620
6.2. update fpm info
a) Using CLI command user can configure fpm host:port details
and can be able to write to config file(zebra.conf) using
write config command. this parameters has no
dependency/impact on other parameters of config file
b) show running-config/write config will display the fpm
information if configured. and will not display any
information related to fpm for default configuration
c) these configured information will be stored to config file.
only on write config command.
6.3 loading from config file
a) zebra attempts to connect to fpm server if fpm parameter
found in config file.else connects to default parameters.
b) if fpm connection drops, fpm will periodically attempts to
connect to remote server.
c) if fpm connections already established. then newly
configured fpm parameters will not disconnect the existing
connection. new connection to the different fpm server will
happen only after existing connection closes by either of
the end.
boris yakubov [Fri, 26 Apr 2013 18:38:34 +0000 (14:38 -0400)]
isisd: Segmentation fault on isis daemon fixes
I have a fix for 2 segmentation fault scenarios on the isis daemon:
1. When running a command "isis passive" on an interface in the
following context:
"end"
"configure terminal "
"interface dummy0"
"isis passive"
The trace back collected:
isis_adjacency.c:521
family=2,
root_sysid=0x20aee6d0 "", parent=0x20af4d68) at isis_spf.c:999
sysid=0x20aee6d0 "")
at isis_spf.c:1217
isis_spf.c:1372
isis_lsp.c:416
isis_lsp.c:1660
isis_main.c:368
The fix location:
file name: isisd/isis_adjacency.c
routine name: isis_adj_build_up_list
2. When deleting the existing isis router instance:
"end"
"configure terminal "
"no router isis DEAD"
The trace back collection:
"DEAD") at isisd.c:252
argc=1, argv=0xbfc39054) at isisd.c:1520
vty=0x20d6f528, cmd=0x0) at command.c:2121
cmd=0x0, vtysh=0) at command.c:2155
isis DEAD") at vty.c:433
isis_main.c:368
and
"DEAD") at isisd.c:260
argc=1, argv=0xbfd6cf54) at isisd.c:1520
vty=0x208cb528, cmd=0x0) at command.c:2121
cmd=0x0, vtysh=0) at command.c:2155
isis DEAD") at vty.c:433
isis_main.c:368
Christian Franke [Mon, 14 Jan 2013 22:41:57 +0000 (23:41 +0100)]
lib: update Solaris multicast API (BZ#725)
On OpenIndiana/Solaris the build fails with "unsupported multicast API".
It's only in the IPv4 part where setsockopt IP_MULTICAST_IF needs a
local address and not the index (IPv6 wants the index).
The following code walks the list of interfaces until it finds the matching
index and uses the interface's local address for the setsockopt call.
I don't know if it works on Solaris < 10 (I guess yes, but I don't have
any machine to verify it).
[NB: this breaks unnumbered setups that use the same IPv4 address on
multiple interfaces. -- equinox@opensourcerouting.org]
Reported-by: Brian Utterback <brian.utterback@oracle.com> Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Patchwork #762
Paul Jakma [Wed, 25 May 2016 13:47:00 +0000 (14:47 +0100)]
ripd: split-horizon default differed between rip_interface_new and _reset
* rip_interface.c: Default for split_horizon_default differed between
rip_interface_new and rip_interface_reset, causing at least some issues
after interface events. See patchwork #604. Fix, and consolidate code.
(rip_interface_{reset,clean}) rename these to 'interface', as that's more
appropriate. Spin the ri specific bodies of these functions out to
rip_interface_{reset,clean} helpers. Factor out the overlaps, so
rip_interface_reset uses rip_interface_clean.
(rip_interface_new) just use rip_interface_reset.
* ripd.h: Update for (rip_interface_{reset,clean})
Reported by xufeng zhang, with a suggested fix on which this commit expands.
See patchwork #604. This commit addresses only the split-horizon
discrepency, issue #2. The other issue they reported, #1, is not addressed,
though suggested fix seems inappropriate.
David Lamparter [Wed, 21 Sep 2016 10:49:30 +0000 (12:49 +0200)]
lib: fix ICC warning in route-map code
ICC thinks we're storing a pointer and might be losing bits at the top:
error #810: conversion from "void *" to "route_map_event_t={enum
<unnamed>}" may lose significant bits
Build is warning-free on ICC 14.0.3 (for Linux x86_64) with this.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Timo Teräs [Fri, 15 Jan 2016 15:36:31 +0000 (17:36 +0200)]
zebra: support FIB override routes
FIB override routes are for routing protocols that establish
shortcut routes, or establish point-to-point routes that should
not be redistributed. Namely this is useful NHRP daemon to come.
Zebra is extended to select two entries from RIB the "best" entry
from routing protocols, and the FIB entry to install to kernel.
FIB override routes are never selected as best entry, and thus
are never adverticed to other routing daemons. The best FIB
override, or if it does not exist the otherwise best RIB is
selected as FIB entry to be installed.
Signed-off-by: Timo Teräs <timo.teras@iki.fi> Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: Massage to fit cumulus tree] Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Timo Teräs [Fri, 15 Jan 2016 15:36:30 +0000 (17:36 +0200)]
zebra: use link scope for interface routes
In linux, 'scope' is a hint of distance of the IP. And this is
evident from the fact that only lower scope can be used as recursive
via lookup result. This changes all interface routes scope to link
so kernel will allow regular routes to use it as via. Then we do
not need to use the 'onlink' attribute.
If the number of CLI collisions is smaller than the expected one,
there's a good chance that Quagga is being built with one or more
daemons disabled. In this case, just print a warning and don't abort
the compilation to allow partial builds.
zebra: check at startup if the kernel supports MPLS
Replace all HAVE_MPLS #ifdef's by a run-time check if MPLS is supported
by the kernel or not. This way we don't need to create multiple packages
for each OS distribution.
Since recently zebra uses only the ZEBRA_REDISTRIBUTE_* messages
to advertise redistributed routes to its clientes. Now the old
ZEBRA_IPV*_ROUTE_* messages are only used for client->zebra communication.
zserv: always send all information about each route
Most routing daemons are not interested in certain pieces of information
when a redistributed route is being removed, like its metric and distance.
ldpd, in the other hand, needs to know the distance of the removed routes
in order to work properly. Now, instead of adding another exception in
zserv's code for ldpd, let's make zebra always send all information
about each route to its clients, independently if the route is being
added or removed. This is ok because all daemons are already prepared
to process these additional fields when the appropriate flags are set
in the zebra messages.
zebra: install MPLS CLI commands only if MPLS is enabled.
To keep things simple, zebra's code should be the same whether MPLS
is enabled or not. Then, when MPLS is not enabled, we just disable all
MPLS CLI commands. This way we don't need to add a lot of #ifdef cruft
in zebra's core, improving code readability.
Quagga: Fix MPLS LSP scheduling to follow nexthop route update
Fix LSP scheduling to occur only after routes are processed because
the LSP resolution depends on the nexthop route being selected. This
is similar to how NHT processing is scheduled.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com> Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com> Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Ticket: CM-6743
Reviewed By: CCR-3233
Testing Done: Verified the failed test multiple times.
Quagga: Install label forwarding entries for statically configured LSPs
Install the statically configured LSPs into the FIB (kernel). This is done
using the new attributes and definitions for MPLS in the kernel -
RTA_VIA, RTA_NEWDST and AF_MPLS.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com> Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-4804
Reviewed By: CCR-3088
Testing Done: Manual in SE-1
Quagga: Fix alignment in netlink messages in some cases
The alignment of nlmsg_len is calculated wrong leading to wrong rta_len
calculations for nested TLVs when the data length of the last TLV added
to the nested TLV is not aligned to RTA_ALIGNTO already. Use same fix
that was implemented in iproute2 by Thomas Graf circa 2005. A reference
to the fix is at
http://oss.sgi.com/archives/netdev/2005-03/msg03103.html.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com> Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-6491
Reviewed By: CCR-3087
Testing Done: MPLS testing with other patches in SE-1
Note: Prior to MPLS, we didn't face this problem as we haven't really had
any nested TLVs; even if RTA_MULTIPATH were to be considered a nested TLV,
it didn't have any non-aligned fields.
Add support for statically configuring MPLS transit LSPs. This allows the
configuration of ILM to one or more NHLFE, as defined in RFC 3031. The
currently supported nexthop types are IPv4 or IPv6.
The two label operations supported are swap and PHP; the latter is configured
by specifying the out-label as "implicit-null". Note that the operation is
against the label, so it should be the same for all NHLFEs.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com> Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-4804, ...
Reviewed By: CCR-3085
Testing Done: In combination with other patches
These commands were ported forward from these
commits: f9b6c39 bgpd: Add back old forms of 'show <afi> <safi>' for compatibility bf1ae6c bgpd: drop machineparse / random "show" improvements 651b402 bgpd: encap show commands 35c3686 bgpd: VPNv6 show commands 135ca15 bgpd: cleanup vty bgp_node_afi/safi utils
This is the first drop of those commits. The files have
changed too much and the diffs to extensive to try to do it
in one piece. Break it up into smaller code chunks.
Original Code: Signed-off-by: Lou Berger <lberger@labn.net>
Forward Port: Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
projects / mirror_frr.git / log