The "sector is in requested range" test used to determine whether
sectors should be re-locked or not is done on a variable that is reset
everytime we cross a chip boundary, which can lead to some blocks being
re-locked while the caller expect them to be unlocked.
Fix the check to make sure this cannot happen.
cfi_ppb_unlock() tries to relock all sectors that were locked before
unlocking the whole chip.
This locking used the chip start address + the FULL offset from the
first flash chip, thereby forming an illegal address. Fix that by using
the chip offset(adr).
do_ppb_xxlock() fails to add chip->start when querying for lock status
(and chip_ready test), which caused false status reports.
Fix that by adding adr += chip->start and adjust call sites
accordingly.
For the word write it is checked if the chip has the correct value.
But it is not checked for the write buffer as only checked if ready.
To make sure for the write buffer change to check the value.
It is enough as this patch is only checking the last written word.
Since it is described by data sheets to check the operation status.
Signed-off-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp> Reviewed-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Brian Norris <computersforpeace@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr> Cc: linux-mtd@lists.infradead.org Cc: stable@vger.kernel.org Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The use of -EAGAIN in rpcrdma_convert_iovs() is a latent bug: the
transport never calls xprt_write_space() when more pages become
available. -ENOBUFS will trigger the correct "delay briefly and call
again" logic.
Fixes: 7a89f9c626e3 ("xprtrdma: Honor ->send_request API contract") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: stable@vger.kernel.org # 4.8+ Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The following code fails to allocate a buffer for the
tail address that the hardware DMAs into when the user
context DMA_RTAIL is set.
if (HFI1_CAP_KGET_MASK(rcd->flags, DMA_RTAIL)) {
rcd->rcvhdrtail_kvaddr = dma_zalloc_coherent(
&dd->pcidev->dev, PAGE_SIZE, &dma_hdrqtail,
gfp_flags);
if (!rcd->rcvhdrtail_kvaddr)
goto bail_free;
rcd->rcvhdrqtailaddr_dma = dma_hdrqtail;
}
So the rcvhdrtail_kvaddr would then be NULL.
The mmap logic fails to check for a NULL rcvhdrtail_kvaddr.
The fix is to test for both user and kernel DMA_TAIL options
during the allocation as well as testing for a NULL
rcvhdrtail_kvaddr during the mmap processing.
Additionally, all downstream testing of the capmask for DMA_RTAIL
have been eliminated in favor of testing rcvhdrtail_kvaddr.
Cc: <stable@vger.kernel.org> # 4.9.x Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
All threads queuing CQ entries on different CQs are unnecessarily
synchronized by a spin lock to check if the CQ kthread worker hasn't
been destroyed before queuing an CQ entry.
The lock used in 6efaf10f163d ("IB/rdmavt: Avoid queuing work into a
destroyed cq kthread worker") is a device global lock and will have
poor performance at scale as completions are entered from a large
number of CPUs.
Convert to use RCU where the read side of RCU is rvt_cq_enter() to
determine that the worker is alive prior to triggering the
completion event.
Apply write side RCU semantics in rvt_driver_cq_init() and
rvt_cq_exit().
Fixes: 6efaf10f163d ("IB/rdmavt: Avoid queuing work into a destroyed cq kthread worker") Cc: <stable@vger.kernel.org> # 4.14.x Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
User send context integrity bits are cleared before the context is
disabled. If the send context is still processing data, any packets
that need those integrity bits will cause an error and halt the send
context.
During the disable handling, the driver waits for the context to drain.
If the context is halted, the driver will eventually timeout because
the context won't drain and then incorrectly bounce the link.
Reorder the bit clearing and the context disable.
Examine the software state and send context status as well as the
egress status to determine if a send context is in the halted state.
Promote the check macros to static functions for consistency with the
new check and to follow kernel style.
Remove an unused define that refers to the egress timeout.
Cc: <stable@vger.kernel.org> # 4.9.x Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
There are config dependent code paths that expose panics in unload
paths both in this file and in debugfs_remove_recursive() because
CONFIG_FAULT_INJECTION and CONFIG_FAULT_INJECTION_DEBUG_FS can be
set independently.
Having CONFIG_FAULT_INJECTION set and CONFIG_FAULT_INJECTION_DEBUG_FS
reset causes fault_create_debugfs_attr() to return an error.
The debugfs.c routines tolerate failures, but the module unload panics
dereferencing a NULL in the two exit routines. If that is fixed, the
dir passed to debugfs_remove_recursive comes from a memory location
that was freed and potentially reused causing a segfault or corrupting
memory.
Fix by insuring that upon failure from fault_create_debugfs_attr() the
parent pointer for the routines is always set to NULL and guards added
in the exit routines to insure that debugfs_remove_recursive() is not
called when when the parent pointer is NULL.
Fixes: 0181ce31b260 ("IB/hfi1: Add receive fault injection feature") Cc: <stable@vger.kernel.org> # 4.14.x Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The code calls dma_sync on login_tx_desc->dma_addr prior to initializing it
with dma-mapped address.
login_tx_desc is a part of iser_conn structure and is used only once
during login negotiation, so the issue is fixed by eliminating
dma_sync call for this buffer using a special case routine.
Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Don Dutile <ddutile@redhat.com> Signed-off-by: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
On fatal error the driver simulates CQE's for ULPs that rely on
completion of all their posted work-request.
For the GSI traffic, the mlx5 has its own mechanism that sends the
completions via software CQE's directly to the relevant CQ.
This should be kept in fatal error too, so the driver should simulate
such CQE's with the specified error state in order to complete GSI QP
work requests.
Without the fix the next deadlock might appears:
schedule_timeout+0x274/0x350
wait_for_common+0xec/0x240
mcast_remove_one+0xd0/0x120 [ib_core]
ib_unregister_device+0x12c/0x230 [ib_core]
mlx5_ib_remove+0xc4/0x270 [mlx5_ib]
mlx5_detach_device+0x184/0x1a0 [mlx5_core]
mlx5_unload_one+0x308/0x340 [mlx5_core]
mlx5_pci_err_detected+0x74/0xe0 [mlx5_core]
Cc: <stable@vger.kernel.org> # 4.7 Fixes: 89ea94a7b6c4 ("IB/mlx5: Reset flow support for IB kernel ULPs") Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
To allow rereg_user_mr to modify the MR from read-only to writable without
using get_user_pages again, we needed to define the initial MR as writable.
However, this was originally done unconditionally, without taking into
account the writability of the underlying virtual memory.
As a result, any attempt to register a read-only MR over read-only
virtual memory failed.
To fix this, do not add the writable flag bit when the user virtual memory
is not writable (e.g. const memory).
However, when the underlying memory is NOT writable (and we therefore
do not define the initial MR as writable), the IB core adds a
"force writable" flag to its user-pages request. If this succeeds,
the reg_user_mr caller gets a writable copy of the original pages.
If the user-space caller then does a rereg_user_mr operation to enable
writability, this will succeed. This should not be allowed, since
the original virtual memory was not writable.
Cc: <stable@vger.kernel.org> Fixes: 9376932d0c26 ("IB/mlx4_ib: Add support for user MR re-registration") Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
A warm restart will fail to unload the driver, leaving link state
potentially flapping up to the point the BIOS resets the adapter.
Correct the issue by hooking the shutdown pci method,
which will bring port down.
Cc: <stable@vger.kernel.org> # 4.9.x Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
There is a race condition in tpm_common_write function allowing
two threads on the same /dev/tpm<N>, or two different applications
on the same /dev/tpmrm<N> to overwrite each other commands/responses.
Fixed this by taking the priv->buffer_mutex early in the function.
Also converted the priv->data_pending from atomic to a regular size_t
type. There is no need for it to be atomic since it is only touched
under the protection of the priv->buffer_mutex.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
If load context command returns with TPM2_RC_HANDLE or TPM2_RC_REFERENCE_H0
then we have use after free in line 114 and double free in 117.
Fixes: 4d57856a21ed2 ("tpm2: add session handle context saving and restoring to the space code") Cc: stable@vger.kernel.org Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off--by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Immediately after the platform_device_unregister() the device will be
cleaned up. Accessing the freed pointer immediately after that will
crash the system.
Found this bug when kernel is built with CONFIG_PAGE_POISONING and testing
loading/unloading audio drivers in a loop on Qcom platforms.
Fix this by moving of_node_clear_flag() just before the unregister calls.
For strings, account for trailing \0 in property length field:
This is consistent with how dtc builds string properties.
Function __of_prop_dup() would misbehave on such properties as it duplicates
properties based on the property length field creating new string values
without trailing \0s.
Signed-off-by: Stefan M Schaeckeler <sschaeck@cisco.com> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Tested-by: Frank Rowand <frank.rowand@sony.com> Cc: <stable@vger.kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
There is a problem with the sd-uhs mode when doing a soft reboot.
Switching back from 1.8v to 3.3v messes with the card, which no longer
respond (timeout errors). According to the specification, we should
perform a card reset (power cycling the card) but this is something we
cannot control on this design.
Then the only solution to restore the communication with the card is an
"unplug-plug" which is not acceptable
Until we find a solution, if any, disable the sd-uhs modes on this design.
For the people using uhs at the moment, there will a performance drop as
a result.
When rewriting swapper using nG mappings, we must performance cache
maintenance around each page table access in order to avoid coherency
problems with the host's cacheable alias under KVM. To ensure correct
ordering of the maintenance with respect to Device memory accesses made
with the Stage-1 MMU disabled, DMBs need to be added between the
maintenance and the corresponding memory access.
This patch adds a missing DMB between writing a new page table entry and
performing a clean+invalidate on the same line.
Fixes: f992b4dfd58b ("arm64: kpti: Add ->enable callback to remap swapper using nG mappings") Cc: <stable@vger.kernel.org> # 4.16.x- Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Commit 17c2895 ("arm64: Abstract syscallno manipulation") abstracts
out the pt_regs.syscallno value for a syscall cancelled by a tracer
as NO_SYSCALL, and provides helpers to set and check for this
condition. However, the way this was implemented has the
unintended side-effect of disabling part of the syscall restart
logic.
This comes about because the second in_syscall() check in
do_signal() re-evaluates the "in a syscall" condition based on the
updated pt_regs instead of the original pt_regs. forget_syscall()
is explicitly called prior to the second check in order to prevent
restart logic in the ret_to_user path being spuriously triggered,
which means that the second in_syscall() check always yields false.
This triggers a failure in
tools/testing/selftests/seccomp/seccomp_bpf.c, when using ptrace to
suppress a signal that interrups a nanosleep() syscall.
Misbehaviour of this type is only expected in the case where a
tracer suppresses a signal and the target process is either being
single-stepped or the interrupted syscall attempts to restart via
-ERESTARTBLOCK.
This patch restores the old behaviour by performing the
in_syscall() check only once at the start of the function.
Fixes: 17c289586009 ("arm64: Abstract syscallno manipulation") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reported-by: Sumit Semwal <sumit.semwal@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Cc: <stable@vger.kernel.org> # 4.14.x- Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The Denali NAND x-clock should be supplied by nand_x_clk, not by
nand_clk. Fix this, otherwise the Denali driver gets incorrect
clock frequency information and incorrectly configures the NAND
timing.
NUMREGBYTES (which is used as the size for gdb_regs[]) is incorrectly
based on DBG_MAX_REG_NUM instead of GDB_MAX_REGS. DBG_MAX_REG_NUM
is the number of total registers, while GDB_MAX_REGS is the number
of 'unsigned longs' it takes to serialize those registers. Since
FP registers require 3 'unsigned longs' each, DBG_MAX_REG_NUM is
smaller than GDB_MAX_REGS.
This causes GDB 8.0 give the following error on connect:
"Truncated register 19 in remote 'g' packet"
This also causes the register serialization/deserialization logic
to overflow gdb_regs[], overwriting whatever follows.
Fixes: 834b2964b7ab ("kgdb,arm: fix register dump") Cc: <stable@vger.kernel.org> # 2.6.37+ Signed-off-by: David Rivshin <drivshin@allworx.com> Acked-by: Rabin Vincent <rabin@rab.in> Tested-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Unregister fadump on kexec down path otherwise the fadump registration
in new kexec-ed kernel complains that fadump is already registered.
This makes new kernel to continue using fadump registered by previous
kernel which may lead to invalid vmcore generation. Hence this patch
fixes this issue by un-registering fadump in fadump_cleanup() which is
called during kexec path so that new kernel can register fadump with
new valid values.
Fixes: b500afff11f6 ("fadump: Invalidate registration and release reserved memory for general use.") Cc: stable@vger.kernel.org # v3.4+ Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
NX can set the 3rd bit in CR register for XER[SO] (Summary overflow)
which is not related to paste request. The current paste function
returns failure for a successful request when this bit is set. So mask
this bit and check the proper return status.
Fixes: 2392c8c8c045 ("powerpc/powernv/vas: Define copy/paste interfaces") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Haren Myneni <haren@us.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
When IODA2 creates a PE, it creates an IOMMU table with it_ops::free
set to pnv_ioda2_table_free() which calls pnv_pci_ioda2_table_free_pages().
Since iommu_tce_table_put() calls it_ops::free when the last reference
to the table is released, explicit call to pnv_pci_ioda2_table_free_pages()
is not needed so let's remove it.
This should fix double free in the case of PCI hotuplug as
pnv_pci_ioda2_table_free_pages() does not reset neither
iommu_table::it_base nor ::it_size.
This was not exposed by SRIOV as it uses different code path via
pnv_pcibios_sriov_disable().
IODA1 does not inialize it_ops::free so it does not have this issue.
Back when we first introduced the DAWR, in commit 4ae7ebe9522a
("powerpc: Change hardware breakpoint to allow longer ranges"), we
screwed up the constraint making it a 1024 byte boundary rather than a
512. This makes the check overly permissive. Fortunately GDB is the
only real user and it always did they right thing, so we never
noticed.
This fixes the constraint to 512 bytes.
Fixes: 4ae7ebe9522a ("powerpc: Change hardware breakpoint to allow longer ranges") Cc: stable@vger.kernel.org # v3.9+ Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
In commit e2a800beaca1 ("powerpc/hw_brk: Fix off by one error when
validating DAWR region end") we fixed setting the DAWR end point to
its max value via PPC_PTRACE_SETHWDEBUG. Unfortunately we broke
PTRACE_SET_DEBUGREG when setting a 512 byte aligned breakpoint.
PTRACE_SET_DEBUGREG currently sets the length of the breakpoint to
zero (memset() in hw_breakpoint_init()). This worked with
arch_validate_hwbkpt_settings() before the above patch was applied but
is now broken if the breakpoint is 512byte aligned.
This sets the length of the breakpoint to 8 bytes when using
PTRACE_SET_DEBUGREG.
Fixes: e2a800beaca1 ("powerpc/hw_brk: Fix off by one error when validating DAWR region end") Cc: stable@vger.kernel.org # v3.11+ Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Currently we do not have an isync, or any other context synchronizing
instruction prior to the slbie/slbmte in _switch() that updates the
SLB entry for the kernel stack.
However that is not correct as outlined in the ISA.
From Power ISA Version 3.0B, Book III, Chapter 11, page 1133:
"Changing the contents of ... the contents of SLB entries ... can
have the side effect of altering the context in which data
addresses and instruction addresses are interpreted, and in which
instructions are executed and data accesses are performed.
...
These side effects need not occur in program order, and therefore
may require explicit synchronization by software.
...
The synchronizing instruction before the context-altering
instruction ensures that all instructions up to and including that
synchronizing instruction are fetched and executed in the context
that existed before the alteration."
And page 1136:
"For data accesses, the context synchronizing instruction before the
slbie, slbieg, slbia, slbmte, tlbie, or tlbiel instruction ensures
that all preceding instructions that access data storage have
completed to a point at which they have reported all exceptions
they will cause."
We're not aware of any bugs caused by this, but it should be fixed
regardless.
Add the missing isync when updating kernel stack SLB entry.
Cc: stable@vger.kernel.org Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Flesh out change log with more ISA text & explanation] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
syzbot is reporting NULL pointer dereference at fuse_ctl_remove_conn() [1].
Since fc->ctl_ndents is incremented by fuse_ctl_add_conn() when new_inode()
failed, fuse_ctl_remove_conn() reaches an inode-less dentry and tries to
clear d_inode(dentry)->i_private field.
Fix by only adding the dentry to the array after being fully set up.
When tearing down the control directory, do d_invalidate() on it to get rid
of any mounts that might have been added.
syzbot is reporting use-after-free at fuse_kill_sb_blk() [1].
Since sb->s_fs_info field is not cleared after fc was released by
fuse_conn_put() when initialization failed, fuse_kill_sb_blk() finds
already released fc and tries to hold the lock. Fix this by clearing
sb->s_fs_info field after calling fuse_conn_put().
Fuse has an "atomic_o_trunc" mode, where userspace filesystem uses the
O_TRUNC flag in the OPEN request to truncate the file atomically with the
open.
In this mode there's no need to send a SETATTR request to userspace after
the open, so fuse_do_setattr() checks this mode and returns. But this
misses the important step of truncating the pagecache.
Add the missing parts of truncation to the ATTR_OPEN branch.
If a connection gets aborted while congested, FUSE can leave
nr_wb_congested[] stuck until reboot causing wait_iff_congested() to
wait spuriously which can lead to severe performance degradation.
The leak is caused by gating congestion state clearing with
fc->connected test in request_end(). This was added way back in 2009
by 26c3679101db ("fuse: destroy bdi on umount"). While the commit
description doesn't explain why the test was added, it most likely was
to avoid dereferencing bdi after it got destroyed.
Since then, bdi lifetime rules have changed many times and now we're
always guaranteed to have access to the bdi while the superblock is
alive (fc->sb).
Drop fc->connected conditional to avoid leaking congestion states.
Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Joshua Miller <joshmiller@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: stable@vger.kernel.org # v2.6.29+ Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
I noticed that there is a possibility that printk_safe_log_store() causes
kernel oops because "args" parameter is passed to vsnprintf() again when
atomic_cmpxchg() detected that we raced. Fix this by using va_copy().
Link: http://lkml.kernel.org/r/201805112002.GIF21216.OFVHFOMLJtQFSO@I-love.SAKURA.ne.jp Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: dvyukov@google.com Cc: syzkaller@googlegroups.com Cc: fengguang.wu@intel.com Cc: linux-kernel@vger.kernel.org Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Fixes: 42a0bb3f71383b45 ("printk/nmi: generic solution for safe printk in NMI") Cc: 4.7+ <stable@vger.kernel.org> # v4.7+ Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
AOSP use userspace firmware loader to load firmwares, which will
return -EAGAIN in case qca/rampatch_00440302.bin is not found.
Since there is no rampatch for dragonboard820c QCA controller
revision, just make it work as is.
CC: Loic Poulain <loic.poulain@linaro.org> CC: Nicolas Dechesne <nicolas.dechesne@linaro.org> CC: Marcel Holtmann <marcel@holtmann.org> CC: Johan Hedberg <johan.hedberg@gmail.com> CC: Stable <stable@vger.kernel.org> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
There was one place where the timeout value for an operation was
not being set, if a capabilities request was done from idle. Move
the timeout value setting to before where that change might be
requested.
IMHO the cause here is the invisible returns in the macros. Maybe
that's a job for later, though.
The function __builtin_expect returns long type (see the gcc
documentation), and so do macros likely and unlikely. Unfortunatelly, when
CONFIG_PROFILE_ANNOTATED_BRANCHES is selected, the macros likely and
unlikely expand to __branch_check__ and __branch_check__ truncates the
long type to int. This unintended truncation may cause bugs in various
kernel code (we found a bug in dm-writecache because of it), so it's
better to fix __branch_check__ to return long.
ftrace_graph_caller was never run after calling ftrace_trace_function,
breaking the function graph tracer. Fix this, bringing it in line with the
x86 implementation.
While we're at it, also streamline the control flow of _mcount a bit to
reduce the number of branches.
This issue was reported before:
https://www.linux-mips.org/archives/linux-mips/2014-11/msg00295.html
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Tested-by: Matt Redfearn <matt.redfearn@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/18929/ Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: stable@vger.kernel.org # v3.17+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The trigger code is picky in how it can be disabled as there may be
dependencies between different events and synthetic events. Change the order
on how triggers are reset.
1) Reset triggers of all synthetic events first
2) Remove triggers with actions attached to them
3) Remove all other triggers
If this order isn't followed, then some triggers will not be reset, and an
error may happen because a trigger is busy.
"%pCr" formats the current rate of a clock, and calls clk_get_rate().
The latter obtains a mutex, hence it must not be called from atomic
context.
Remove support for this rarely-used format, as vsprintf() (and e.g.
printk()) must be callable from any context.
Any remaining out-of-tree users will start seeing the clock's name
printed instead of its rate.
Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com> Fixes: 900cca2944254edd ("lib/vsprintf: add %pC{,n,r} format specifiers for clocks") Link: http://lkml.kernel.org/r/1527845302-12159-5-git-send-email-geert+renesas@glider.be
To: Jia-Ju Bai <baijiaju1990@gmail.com>
To: Jonathan Corbet <corbet@lwn.net>
To: Michael Turquette <mturquette@baylibre.com>
To: Stephen Boyd <sboyd@kernel.org>
To: Zhang Rui <rui.zhang@intel.com>
To: Eduardo Valentin <edubezval@gmail.com>
To: Eric Anholt <eric@anholt.net>
To: Stefan Wahren <stefan.wahren@i2se.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-doc@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org # 4.1+ Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Printk format "%pCr" will be removed soon, as clk_get_rate() must not be
called in atomic context.
Replace it by open-coding the operation. This is safe here, as the code
runs in task context.
Link: http://lkml.kernel.org/r/1527845302-12159-2-git-send-email-geert+renesas@glider.be
To: Jia-Ju Bai <baijiaju1990@gmail.com>
To: Jonathan Corbet <corbet@lwn.net>
To: Michael Turquette <mturquette@baylibre.com>
To: Stephen Boyd <sboyd@kernel.org>
To: Zhang Rui <rui.zhang@intel.com>
To: Eduardo Valentin <edubezval@gmail.com>
To: Eric Anholt <eric@anholt.net>
To: Stefan Wahren <stefan.wahren@i2se.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-doc@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org # 4.5+ Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Printk format "%pCr" will be removed soon, as clk_get_rate() must not be
called in atomic context.
Replace it by printing the variable that already holds the clock rate.
Note that calling clk_get_rate() is safe here, as the code runs in task
context.
Link: http://lkml.kernel.org/r/1527845302-12159-3-git-send-email-geert+renesas@glider.be
To: Jia-Ju Bai <baijiaju1990@gmail.com>
To: Jonathan Corbet <corbet@lwn.net>
To: Michael Turquette <mturquette@baylibre.com>
To: Stephen Boyd <sboyd@kernel.org>
To: Zhang Rui <rui.zhang@intel.com>
To: Eduardo Valentin <edubezval@gmail.com>
To: Eric Anholt <eric@anholt.net>
To: Stefan Wahren <stefan.wahren@i2se.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-doc@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
According to "EP93xx User’s Guide", I2STXLinCtrlData and I2SRXLinCtrlData
registers actually have different format. The only currently used bit
(Left_Right_Justify) has different position. Fix this and simplify the
whole setup taking into account the fact that both registers have zero
default value.
The practical effect of the above is repaired SND_SOC_DAIFMT_RIGHT_J
support (currently unused).
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Some low-speed and full-speed devices (for example, bluetooth)
do not have time to initialize. For them, ETIMEDOUT is a valid error.
We need to give them another try. Otherwise, they will
never be initialized correctly and in dmesg will be messages
"Bluetooth: hci0 command 0x1002 tx timeout" or similars.
Fixes: 264904ccc33c ("usb: retry reset if a device times out") Cc: stable <stable@vger.kernel.org> Signed-off-by: Maxim Moseychuk <franchesko.salias.hudro.pedros@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
This commit fixes a rare but possible case when the clk rate is updated
without update of the regulator voltage.
At boot up, CPUfreq checks if the system is running at the right freq. This
is a sanity check in case a bootloader set clk rate that is outside of freq
table present with cpufreq core. In such cases system can be unstable so
better to change it to a freq that is preset in freq-table.
The CPUfreq takes next freq that is >= policy->cur and this is our
target_freq that needs to be set now.
dev_pm_opp_set_rate(dev, target_freq) checks the target_freq and the
old_freq (a current rate). If these are equal it returns early. If not,
it searches for OPP (old_opp) that fits best to old_freq (not listed in
the table) and updates old_freq (!).
Here, we can end up with old_freq = old_opp.rate = target_freq, which
is not handled in _generic_set_opp_regulator(). It's supposed to update
voltage only when freq > old_freq || freq > old_freq.
if (freq > old_freq) {
ret = _set_opp_voltage(dev, reg, new_supply);
[...]
if (freq < old_freq) {
ret = _set_opp_voltage(dev, reg, new_supply);
if (ret)
It results in, no voltage update while clk rate is updated.
If a device link is added via device_link_add() by the driver of the
link's consumer device, the supplier's runtime PM usage counter is
going to be dropped by the pm_runtime_put_suppliers() call in
driver_probe_device(). However, in that case it is not incremented
unless the supplier driver is already present and the link is not
stateless. That leads to a runtime PM usage counter imbalance for
the supplier device in a few cases.
To prevent that from happening, bump up the supplier runtime
PM usage counter in device_link_add() for all links with the
DL_FLAG_PM_RUNTIME flag set that are added at the consumer probe
time. Use pm_runtime_get_noresume() for that as the callers of
device_link_add() who want the supplier to be resumed by it are
expected to pass DL_FLAG_RPM_ACTIVE in flags to it anyway, but
additionally resume the supplier if the link is added during
consumer driver probe to retain the existing behavior for the
callers depending on it.
Fixes: 21d5c57b3726 (PM / runtime: Use device links) Reported-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: 4.10+ <stable@vger.kernel.org> # 4.10+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
In case the PM domain fails to be powered on in genpd_dev_pm_attach(), it
returns -EPROBE_DEFER, but keeping the device attached to its PM domain.
This leads to problems when the next attempt to attach is re-tried. More
precisely, in that situation an -EEXIST error code is returned, because the
device already has its PM domain pointer assigned, from the first attempt.
Now, because of the sloppy error handling by the existing callers of
dev_pm_domain_attach(), probing is allowed to continue when -EEXIST is
returned. However, in such case there are no guarantees that the PM domain
is powered on by genpd, which may lead to hangs when buses/drivers tried to
access their devices.
Let's fix this behaviour, simply by detaching the device when powering on
fails in genpd_dev_pm_attach().
Cc: v4.11+ <stable@vger.kernel.org> # v4.11+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
While working on changing this code to use force_sig_fault I
discovered that do_unaliged_user is sets si_signo to SIGBUS and passes
SIGSEGV to force_sig_info. Which is just b0rked.
The code is reporting a SIGBUS error so replace the SIGSEGV with SIGBUS.
Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: linux-xtensa@linux-xtensa.org Cc: stable@vger.kernel.org Acked-by: Max Filippov <jcmvbkbc@gmail.com> Fixes: 5a0015d62668 ("[PATCH] xtensa: Architecture support for Tensilica Xtensa Part 3") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Commit 40f70c03e33a ("serial: sh-sci: add locking to console write
function to avoid SMP lockup") copied the strategy to avoid locking
problems in conjuncture with the console from the UART8250
driver. Instead using directly spin_{try}lock_irqsave(),
local_irq_save() followed by spin_{try}lock() was used. While this is
correct on mainline, for -rt it is a problem. spin_{try}lock() will
check if it is running in a valid context. Since the local_irq_save()
has already been executed, the context has changed and
spin_{try}lock() will complain. The reason why spin_{try}lock()
complains is that on -rt the spin locks are turned into mutexes and
therefore can sleep. Sleeping with interrupts disabled is not valid.
If 020/030 support is enabled, get_io_area() leaves an IO_SIZE gap
between mappings which is added to the vm_struct representing the
mapping. __ioremap() uses the actual requested size (after alignment),
while __iounmap() is passed the size from the vm_struct.
On 020/030, early termination descriptors are used to set up mappings of
extent 'size', which are validated on unmapping. The unmapped gap of
size IO_SIZE defeats the sanity check of the pmd tables, causing
__iounmap() to loop forever on 030.
On 040/060, unmapping of page table entries does not check for a valid
mapping, so the umapping loop always completes there.
Adjust size to be unmapped by the gap that had been added in the
vm_struct prior.
This fixes the hang in atari_platform_init() reported a long time ago,
and a similar one reported by Finn recently (addressed by removing
ioremap() use from the SWIM driver.
Tested on my Falcon in 030 mode - untested but should work the same on
040/060 (the extra page tables cleared there would never have been set
up anyway).
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
[geert: Minor commit description improvements]
[geert: This was fixed in 2.4.23, but not in 2.5.x] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
fpu__drop() has an explicit fwait which under some conditions can trigger a
fixable FPU exception while in kernel. Thus, we should attempt to fixup the
exception first, and only call notify_die() if the fixup failed just like
in do_general_protection(). The original call sequence incorrectly triggers
KDB entry on debug kernels under particular FPU-intensive workloads.
Andy noted, that this makes the whole conditional irq enable thing even
more inconsistent, but fixing that it outside the scope of this.
Signed-off-by: Siarhei Liakh <siarhei.liakh@concurrent-rt.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Borislav Petkov" <bpetkov@suse.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/DM5PR11MB201156F1CAB2592B07C79A03B17D0@DM5PR11MB2011.namprd11.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
mce_no_way_out() does a quick check during #MC to see whether some of
the MCEs logged would require the kernel to panic immediately. And it
passes a struct mce where MCi_STATUS gets written.
However, after having saved a valid status value, the next iteration
of the loop which goes over the MCA banks on the CPU, overwrites the
valid status value because we're using struct mce as storage instead of
a temporary variable.
Which leads to MCE records with an empty status value:
mce: [Hardware Error]: CPU 0: Machine Check Exception: 6 Bank 0: 0000000000000000
mce: [Hardware Error]: RIP 10:<ffffffffbd42fbd7> {trigger_mce+0x7/0x10}
In order to prevent the loss of the status register value, return
immediately when severity is a panic one so that we can panic
immediately with the first fatal MCE logged. This is also the intention
of this function and not to noodle over the banks while a fatal MCE is
already logged.
Tony: read the rest of the MCA bank to populate the struct mce fully.
Suggested-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20180622095428.626-8-bp@alien8.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Some injection testing resulted in the following console log:
mce: [Hardware Error]: CPU 22: Machine Check Exception: f Bank 1: bd80000000100134
mce: [Hardware Error]: RIP 10:<ffffffffc05292dd> {pmem_do_bvec+0x11d/0x330 [nd_pmem]}
mce: [Hardware Error]: TSC c51a63035d52 ADDR 3234bc4000 MISC 88
mce: [Hardware Error]: PROCESSOR 0:50654 TIME 1526502199 SOCKET 0 APIC 38 microcode 2000043
mce: [Hardware Error]: Run the above through 'mcelog --ascii'
Kernel panic - not syncing: Machine check from unknown source
This confused everybody because the first line quite clearly shows
that we found a logged error in "Bank 1", while the last line says
"unknown source".
The problem is that the Linux code doesn't do the right thing
for a local machine check that results in a fatal error.
It turns out that we know very early in the handler whether the
machine check is fatal. The call to mce_no_way_out() has checked
all the banks for the CPU that took the local machine check. If
it says we must crash, we can do so right away with the right
messages.
We do scan all the banks again. This means that we might initially
not see a problem, but during the second scan find something fatal.
If this happens we print a slightly different message (so I can
see if it actually every happens).
[ bp: Remove unneeded severity assignment. ]
Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: stable@vger.kernel.org # 4.2 Link: http://lkml.kernel.org/r/52e049a497e86fd0b71c529651def8871c804df0.1527283897.git.tony.luck@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Currently we just check the "CAPID0" register to see whether the CPU
can recover from machine checks.
But there are also some special SKUs which do not have all advanced
RAS features, but do enable machine check recovery for use with NVDIMMs.
Add a check for any of bits {8:5} in the "CAPID5" register (each
reports some NVDIMM mode available, if any of them are set, then
the system supports memory machine check recovery).
Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: stable@vger.kernel.org # 4.9 Cc: Dan Williams <dan.j.williams@intel.com> Cc: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/03cbed6e99ddafb51c2eadf9a3b7c8d7a0cc204e.1527283897.git.tony.luck@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Since we added support to add recovery from some errors inside the kernel in:
commit b2f9d678e28c ("x86/mce: Check for faults tagged in EXTABLE_CLASS_FAULT exception table entries")
we have done a less than stellar job at reporting the cause of recoverable
machine checks that occur in other parts of the kernel. The user just gets
the unhelpful message:
doubly unhelpful when they check the manual for the reported IA32_MSR_STATUS.MCACOD
and see that it is listed as one of the standard recoverable values.
Add an extra rule to the MCE severity table to catch this case and report it
as:
mce: [Hardware Error]: Machine check: Data load in unrecoverable area of kernel
Fixes: b2f9d678e28c ("x86/mce: Check for faults tagged in EXTABLE_CLASS_FAULT exception table entries") Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: stable@vger.kernel.org # 4.6+ Cc: Dan Williams <dan.j.williams@intel.com> Cc: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/4cc7c465150a9a48b8b9f45d0b840278e77eb9b5.1527283897.git.tony.luck@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Mark Rutland noticed that GCC optimization passes have the potential to elide
necessary invocations of the array_index_mask_nospec() instruction sequence,
so mark the asm() volatile.
Mark explains:
"The volatile will inhibit *some* cases where the compiler could lift the
array_index_nospec() call out of a branch, e.g. where there are multiple
invocations of array_index_nospec() with the same arguments:
... since the compiler can determine that the two invocations yield the same
result, and reuse the first result (likely the same register as idx was in
originally) for the second branch, effectively re-writing the above as:
Andy Whitcroft [Thu, 6 Dec 2018 12:32:00 +0000 (13:32 +0100)]
UBUNTU: SAUCE: base/dd: limit release function changes to vfio driver only
It seems that we can trigger the new race detection after remove()
with some drivers which clear the driver as they unreference
the module. This leads us to fail to clear down those devices which
triggers suspend/resume issues.
Limit the core changes to only apply to the vfio driver while we
work with upstream on a more generic fix.
Fixes: 876dcb5f4576 ("UBUNTU: SAUCE: vfio -- release device lock before userspace requests") BugLink: http://bugs.launchpad.net/bugs/1803942 Signed-off-by: Andy Whitcroft <apw@canonical.com> Acked-by: Colin Ian King <colin.king@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Sandeep Singh [Wed, 5 Dec 2018 08:32:00 +0000 (09:32 +0100)]
xhci: workaround CSS timeout on AMD SNPS 3.0 xHC
BugLink: https://bugs.launchpad.net/bugs/1806838
Occasionally AMD SNPS 3.0 xHC does not respond to
CSS when set, also it does not flag anything on SRE and HCE
to point the internal xHC errors on USBSTS register. This stalls
the entire system wide suspend and there is no point in stalling
just because of xHC CSS is not responding.
To work around this problem, if the xHC does not flag
anything on SRE and HCE, we can skip the CSS
timeout and allow the system to continue the suspend. Once the
system resume happens we can internally reset the controller
using XHCI_RESET_ON_RESUME quirk
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Sandeep Singh <Sandeep.Singh@amd.com>
cc: Nehal Shah <Nehal-bakulchandra.Shah@amd.com> Cc: <stable@vger.kernel.org> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
(backported from commit b5282b66f0dfe6e76644c5195ec6aa3de15fefa3 git://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git for-usb-linus) Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Acked-by: Khalid Elmously <khalid.elmously@canonical.com> Acked-by: Andy Whitcroft <andy.whitcroft@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Marc Zyngier [Wed, 5 Dec 2018 08:32:00 +0000 (09:32 +0100)]
xhci: Allow more than 32 quirks
BugLink: https://bugs.launchpad.net/bugs/1806838
We now have 32 different quirks, and the field that holds them
is full. Let's bump it up to the next stage so that we can handle
some more... The type is now an unsigned long long, which is 64bit
on most architectures.
We take this opportunity to change the quirks from using (1 << x)
to BIT_ULL(x).
Tested-by: Domenico Andreoli <domenico.andreoli@linux.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Faiz Abbas <faiz_abbas@ti.com> Tested-by: Domenico Andreoli <domenico.andreoli@linux.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(backported from commit 36b6857932f380fcb55c31ac75857e3e81dd583a) Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Acked-by: Khalid Elmously <khalid.elmously@canonical.com> Acked-by: Andy Whitcroft <andy.whitcroft@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Andy Whitcroft [Wed, 8 Aug 2018 20:30:35 +0000 (21:30 +0100)]
UBUNTU: [Packaging] buildinfo -- add compiler information to the flavour ABI
In getabis we extract the compiler information from an arbitrary .ko.
As we will not have those when only using buildinfo ABI information we
need to collect the compiler information during the build.
BugLink: http://bugs.launchpad.net/bugs/1806380 Signed-off-by: Andy Whitcroft <apw@canonical.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Andy Whitcroft [Wed, 8 Aug 2018 20:29:58 +0000 (21:29 +0100)]
UBUNTU: [Packaging] buildinfo -- add firmware information to the flavour ABI
In getabis we extract the firmware information from each of the .kos.
As we will not have those when only using buildinfo ABI information we
need to collect the firmware information during the build.
BugLink: http://bugs.launchpad.net/bugs/1806380 Signed-off-by: Andy Whitcroft <apw@canonical.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Thomas Gleixner [Tue, 27 Nov 2018 05:23:16 +0000 (00:23 -0500)]
posix-timers: Sanitize overrun handling
CVE-2018-12896
The posix timer overrun handling is broken because the forwarding functions
can return a huge number of overruns which does not fit in an int. As a
consequence timer_getoverrun(2) and siginfo::si_overrun can turn into
random number generators.
The k_clock::timer_forward() callbacks return a 64 bit value now. Make
k_itimer::ti_overrun[_last] 64bit as well, so the kernel internal
accounting is correct. 3Remove the temporary (int) casts.
Add a helper function which clamps the overrun value returned to user space
via timer_getoverrun(2) or siginfo::si_overrun limited to a positive value
between 0 and INT_MAX. INT_MAX is an indicator for user space that the
overrun value has been clamped.
Reported-by: Team OWL337 <icytxw@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Link: https://lkml.kernel.org/r/20180626132705.018623573@linutronix.de
(cherry picked from commit 78c9c4dfbf8c04883941445a195276bb4bb92c76) Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Acked-by: Kleber Souza <kleber.souza@canonical.com> Acked-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Jann Horn [Fri, 9 Nov 2018 14:33:26 +0000 (15:33 +0100)]
USB: yurex: fix out-of-bounds uaccess in read handler
In general, accessing userspace memory beyond the length of the supplied
buffer in VFS read/write handlers can lead to both kernel memory corruption
(via kernel_read()/kernel_write(), which can e.g. be triggered via
sys_splice()) and privilege escalation inside userspace.
Fix it by using simple_read_from_buffer() instead of custom logic.
Takashi Iwai [Fri, 23 Nov 2018 07:28:35 +0000 (02:28 -0500)]
ALSA: rawmidi: Change resized buffers atomically
CVE-2018-10902
The SNDRV_RAWMIDI_IOCTL_PARAMS ioctl may resize the buffers and the
current code is racy. For example, the sequencer client may write to
buffer while it being resized.
As a simple workaround, let's switch to the resized buffer inside the
stream runtime lock.
Young_X [Tue, 20 Nov 2018 00:48:41 +0000 (00:48 +0000)]
cdrom: fix improper type cast, which can leat to information leak.
There is another cast from unsigned long to int which causes
a bounds check to fail with specially crafted input. The value is
then used as an index in the slot array in cdrom_slot_status().
This issue is similar to CVE-2018-16658 and CVE-2018-10940.
Darrick J. Wong [Tue, 20 Nov 2018 01:31:10 +0000 (01:31 +0000)]
xfs: don't fail when converting shortform attr to long form during ATTR_REPLACE
Kanda Motohiro reported that expanding a tiny xattr into a large xattr
fails on XFS because we remove the tiny xattr from a shortform fork and
then try to re-add it after converting the fork to extents format having
not removed the ATTR_REPLACE flag. This fails because the attr is no
longer present, causing a fs shutdown.
This is derived from the patch in his bug report, but we really
shouldn't ignore a nonzero retval from the remove call.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199119 Reported-by: kanda.motohiro@gmail.com Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
CVE-2018-18690
Jann Horn [Fri, 23 Nov 2018 03:46:54 +0000 (11:46 +0800)]
bpf: 32-bit RSH verification must truncate input before the ALU op
CVE-2018-18445
When I wrote commit 468f6eafa6c4 ("bpf: fix 32-bit ALU op verification"), I
assumed that, in order to emulate 64-bit arithmetic with 32-bit logic, it
is sufficient to just truncate the output to 32 bits; and so I just moved
the register size coercion that used to be at the start of the function to
the end of the function.
That assumption is true for almost every op, but not for 32-bit right
shifts, because those can propagate information towards the least
significant bit. Fix it by always truncating inputs for 32-bit ops to 32
bits.
Also get rid of the coerce_reg_to_size() after the ALU op, since that has
no effect.
Fixes: 468f6eafa6c4 ("bpf: fix 32-bit ALU op verification") Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
(cherry picked from commit b799207e1e1816b09e7a5920fbb2d5fcf6edd681) Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Acked-by: Khalid Elmously <khalid.elmously@canonical.com> Acked-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com> Acked-by: Brad Figg <brad.figg@canonical.com> Acked-by: Kamal Mostafa <kamal@canonical.com> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/1787405
There was an artificial restriction on the card/adapter id
to only 6 bits but all the AP commands do support adapter
ids with 8 bit. This patch removes this restriction to 64
adapters and now up to 256 adapter can get addressed.
Some of the ioctl calls work on the max number of cards
possible (which was 64). These ioctls are now deprecated
but still supported. All the defines, structs and ioctl
interface declarations have been kept for compabibility.
There are now new ioctls (and defines for these) with an
additional '2' appended which provide the extended versions
with 256 cards supported.
Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
(cherry picked from commit af4a72276d49da117dbc99799afee740a26f8f10) Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com> Acked-by: Brad Figg <brad.figg@canonical.com> Acked-by: Kamal Mostafa <kamal@canonical.com> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/1787405
This patch removes the deprecated zcrypt proc interface.
It is outdated and deprecated and does not support the
latest 3 generations of CEX cards.
Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
(cherry picked from commit 71cbbff8c4fd1467b59b8c15a06093ac03cd11c7) Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com> Acked-by: Brad Figg <brad.figg@canonical.com> Acked-by: Kamal Mostafa <kamal@canonical.com> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>