Tomer Tayar [Wed, 27 Dec 2017 17:30:06 +0000 (19:30 +0200)]
qed*: HSI renaming for different types of HW
This patch renames defines and structures in the FW HSI files to allow a
distinction between different types of HW.
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Chad Dupuis <Chad.Dupuis@cavium.com> Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tomer Tayar [Wed, 27 Dec 2017 17:30:05 +0000 (19:30 +0200)]
qed*: Refactoring and rearranging FW API with no functional impact
This patch refactors and reorders the FW API files in preparation of
upgrading the code to support new FW.
- Make use of the BIT macro in appropriate places.
- Whitespace changes to align values and code blocks.
- Comments are updated (spelling mistakes, removed if not clear).
- Group together code blocks which are related or deal with similar
matters.
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kristian Evensen [Wed, 27 Dec 2017 17:27:58 +0000 (18:27 +0100)]
inet_diag: Add equal-operator for ports
inet_diag currently provides less/greater than or equal operators for
comparing ports when filtering sockets. An equal comparison can be
performed by combining the two existing operators, or a user can for
example request a port range and then do the final filtering in
userspace. However, these approaches both have drawbacks. Implementing
equal using LE/GE causes the size and complexity of a filter to grow
quickly as the number of ports increase, while it on busy machines would
be great if the kernel only returns information about relevant sockets.
This patch introduces source and destination port equal operators.
INET_DIAG_BC_S_EQ is used to match a source port, INET_DIAG_BC_D_EQ a
destination port, and usage is the same as for the existing port
operators. I.e., the port to match is stored in the no-member of the
next inet_diag_bc_op-struct in the filter.
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
please apply some post-christmas leftovers for 4.16.
Two patches to improve IP address management on L3, and two that add
support to auto-config the transport mode on z/VM VNICs.
Note that one patch in the series touches arch/s390 (acked by Martin).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Wed, 27 Dec 2017 16:44:31 +0000 (17:44 +0100)]
s390/qeth: support early setup for z/VM NICs
The transport mode that a z/VM NIC is configured in, must match the
hypervisor-internal network which the NIC is coupled to.
To get this right automatically, have qeth issue a diag26c hypervisor call
that provides all sorts of information for a specific VNIC.
With z/VM update VM65918, this also includes the VNIC's required
transport mode.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Wed, 27 Dec 2017 16:44:30 +0000 (17:44 +0100)]
s390/diag: add diag26c support for VNIC info
With subcode 0x24, diag26c returns all sorts of VNIC-related information.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julia Lawall [Wed, 27 Dec 2017 14:51:38 +0000 (15:51 +0100)]
openvswitch: drop unneeded newline
OVS_NLERR prints a newline at the end of the message string, so the
message string does not need to include a newline explicitly. Done
using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
Julia Lawall [Wed, 27 Dec 2017 14:51:36 +0000 (15:51 +0100)]
net: dccp: drop unneeded newline
DCCP_CRIT prints some other text and then a newline after the message
string, so the message string does not need to include a newline
explicitly. Done using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Wed, 27 Dec 2017 09:05:52 +0000 (17:05 +0800)]
net: sched: fix skb leak in dev_requeue_skb()
When dev_requeue_skb() is called with bulked skb list, only the
first skb of the list will be requeued to qdisc layer, and leak
the others without free them.
TCP is broken due to skb leak since no free skb will be considered
as still in the host queue and never be retransmitted. This happend
when dev_requeue_skb() called from qdisc_restart().
qdisc_restart
|-- dequeue_skb
|-- sch_direct_xmit()
|-- dev_requeue_skb() <-- skb may bluked
Fix dev_requeue_skb() to requeue the full bluked list. Also change
to use __skb_queue_tail() in __dev_requeue_skb() to avoid skb out
of order.
Fixes: a53851e2c321 ("net: sched: explicit locking in gso_cpu fallback") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ganesh Goudar [Wed, 27 Dec 2017 07:42:57 +0000 (13:12 +0530)]
cxgb4: use CLIP with LIP6 on T6 for TCAM filters
On T6, LIP compression is always enabled for IPv6 and uncompressed
IPv6 for LIP is not supported. So, for IPv6 TCAM filters on T6,
add LIP6 to CLIP on filter creation, and release the same on filter
deletion.
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Zhu Yanjun [Tue, 26 Dec 2017 06:22:50 +0000 (01:22 -0500)]
forcedeth: optimize the rx with likely
In the rx fastpath, the function netdev_alloc_skb rarely fails.
Therefore, a likely() optimization is added to this error check
conditional.
CC: Srinivas Eeda <srinivas.eeda@oracle.com> CC: Joe Jin <joe.jin@oracle.com> CC: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sowmini Varadhan [Mon, 25 Dec 2017 22:43:04 +0000 (14:43 -0800)]
selftests/net: fix bugs in address and port initialization
Address/port initialization should work correctly regardless
of the order in which command line arguments are supplied,
E.g, cfg_port should be used to connect to the remote host
even if it is processed after -D, src/dst address initialization
should not require that [-4|-6] be specified before
the -S or -D args, receiver should be able to bind to *.<cfg_port>
Achieve this by making sure that the address/port structures
are initialized after all command line options are parsed.
Store cfg_port in host-byte order, and use htons()
to set up the sin_port/sin6_port before bind/connect,
so that the network system calls get the correct values
in network-byte order.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
net: sched: Fix RED qdisc offload flag
Replacing the RED offload flag (TC_RED_OFFLOADED) with the generic one
(TCQ_F_OFFLOADED) deleted some of the logic behind it. This patchset fixes
this problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Nogah Frankel [Mon, 25 Dec 2017 08:51:41 +0000 (10:51 +0200)]
net_sch: red: Fix the new offload indication
Update the offload flag, TCQ_F_OFFLOADED, in each dump call (and ignore
the offloading function return value in relation to this flag).
This is done because a qdisc is being initialized, and therefore offloaded
before being grafted. Since the ability of the driver to offload the qdisc
depends on its location, a qdisc can be offloaded and un-offloaded by graft
calls, that doesn't effect the qdisc itself.
Fixes: 428a68af3a7c ("net: sched: Move to new offload indication in RED" Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jia-Ju Bai [Sun, 24 Dec 2017 03:54:33 +0000 (11:54 +0800)]
sky2: Replace mdelay with msleep in sky2_vpd_wait
sky2_vpd_wait is not called in an interrupt handler nor holding a spinlock.
The function mdelay in it can be replaced with msleep, to reduce busy wait.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
John Fastabend [Thu, 28 Dec 2017 03:50:25 +0000 (19:50 -0800)]
net: ptr_ring: otherwise safe empty checks can overrun array bounds
When running consumer and/or producer operations and empty checks in
parallel its possible to have the empty check run past the end of the
array. The scenario occurs when an empty check is run while
__ptr_ring_discard_one() is in progress. Specifically after the
consumer_head is incremented but before (consumer_head >= ring_size)
check is made and the consumer head is zeroe'd.
To resolve this, without having to rework how consumer/producer ops
work on the array, simply add an extra dummy slot to the end of the
array. Even if we did a rework to avoid the extra slot it looks
like the normal case checks would suffer some so best to just
allocate an extra pointer.
Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com> Fixes: c5ad119fb6c09 ("net: sched: pfifo_fast use skb_array") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
include/trace/events/tcp.h is a little bit more tricky. The removal
of in-trace-macro ifdefs in 'net' paralleled with moving
show_tcp_state_name and friends over to include/trace/events/sock.h
in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
1) IPv6 gre tunnels end up with different default features enabled
depending upon whether netlink or ioctls are used to bring them up.
Fix from Alexey Kodanev.
2) Fix read past end of user control message in RDS< from Avinash
Repaka.
3) Missing RCU barrier in mini qdisc code, from Cong Wang.
4) Missing policy put when reusing per-cpu route entries, from Florian
Westphal.
5) Handle nested PCI errors properly in bnx2x driver, from Guilherme G.
Piccoli.
6) Run nested transport mode IPSEC packets via tasklet, from Herbert
Xu.
7) Fix handling poll() for stream sockets in tipc, from Parthasarathy
Bhuvaragan.
8) Fix two stack-out-of-bounds issues in IPSEC, from Steffen Klassert.
9) Another zerocopy ubuf handling fix, from Willem de Bruijn.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits)
strparser: Call sock_owned_by_user_nocheck
sock: Add sock_owned_by_user_nocheck
skbuff: in skb_copy_ubufs unclone before releasing zerocopy
tipc: fix hanging poll() for stream sockets
sctp: Replace use of sockets_allocated with specified macro.
bnx2x: Improve reliability in case of nested PCI errors
tg3: Enable PHY reset in MTU change path for 5720
tg3: Add workaround to restrict 5762 MRRS to 2048
tg3: Update copyright
net: fec: unmap the xmit buffer that are not transferred by DMA
tipc: fix tipc_mon_delete() oops in tipc_enable_bearer() error path
tipc: error path leak fixes in tipc_enable_bearer()
RDS: Check cmsg_len before dereferencing CMSG_DATA
tcp: Avoid preprocessor directives in tracepoint macro args
tipc: fix memory leak of group member when peer node is lost
net: sched: fix possible null pointer deref in tcf_block_put
tipc: base group replicast ack counter on number of actual receivers
net_sched: fix a missing rcu barrier in mini_qdisc_pair_swap()
net: phy: micrel: ksz9031: reconfigure autoneg after phy autoneg workaround
ip6_gre: fix device features for ioctl setup
...
Linus Torvalds [Fri, 29 Dec 2017 07:16:24 +0000 (23:16 -0800)]
Merge tag 'drm-fixes-for-v4.15-rc6' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"nouveau and i915 regression fixes"
* tag 'drm-fixes-for-v4.15-rc6' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau: fix race when adding delayed work items
i915: Reject CCS modifiers for pipe C on Geminilake
drm/i915/gvt: Fix pipe A enable as default for vgpu
Linus Torvalds [Fri, 29 Dec 2017 07:14:47 +0000 (23:14 -0800)]
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"One more fix for the runtime PM clk patches. We're calling a runtime
PM API that may schedule from somewhere that we can't do that. We
change to the async version of pm_runtime_put() to fix it"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: use atomic runtime pm api in clk_core_is_enabled
Linus Torvalds [Fri, 29 Dec 2017 07:09:45 +0000 (23:09 -0800)]
Merge tag 'led_fixes_for_4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED fix from Jacek Anaszewski:
"A single LED fix for brightness setting when delay_off is 0"
* tag 'led_fixes_for_4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
led: core: Fix brightness setting when setting delay_off=0
Linus Torvalds [Fri, 29 Dec 2017 07:06:01 +0000 (23:06 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"This is the next batch of for-rc patches from RDMA. It includes the
fix for the ipoib regression I mentioned last time, and the result of
a fairly major debugging effort to get iser working reliably on cxgb4
hardware - it turns out the cxgb4 driver was not handling QP error
flushing properly causing iser to fail.
- cxgb4 fix for an iser testing failure as debugged by Steve and
Sagi. The problem was a driver bug in the handling of shutting down
a QP.
- Various vmw_pvrdma fixes for bogus WARN_ON, missed resource free on
error unwind and a use after free bug
- Improper congestion counter values on mlx5 when link aggregation is
enabled
- ipoib lockdep regression introduced in this merge window
- hfi1 regression supporting the device in a VM introduced in a
recent patch
- Typo that breaks future uAPI compatibility in the verbs core
- More SELinux related oops fixing
- Fix an oops during error unwind in mlx5"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/mlx5: Fix mlx5_ib_alloc_mr error flow
IB/core: Verify that QP is security enabled in create and destroy
IB/uverbs: Fix command checking as part of ib_uverbs_ex_modify_qp()
IB/mlx5: Serialize access to the VMA list
IB/hfi: Only read capability registers if the capability exists
IB/ipoib: Fix lockdep issue found on ipoib_ib_dev_heavy_flush
IB/mlx5: Fix congestion counters in LAG mode
RDMA/vmw_pvrdma: Avoid use after free due to QP/CQ/SRQ destroy
RDMA/vmw_pvrdma: Use refcount_dec_and_test to avoid warning
RDMA/vmw_pvrdma: Call ib_umem_release on destroy QP path
iw_cxgb4: when flushing, complete all wrs in a chain
iw_cxgb4: reflect the original WR opcode in drain cqes
iw_cxgb4: Only validate the MSN for successful completions
This series includes updates for mlx5 E-Switch infrastructures,
to be merged into net-next and rdma-next trees.
Mark's patches provide E-Switch refactoring that generalize the mlx5
E-Switch vf representors interfaces and data structures. The serious is
mainly focused on moving ethernet (netdev) specific representors logic out
of E-Switch (eswitch.c) into mlx5e representor module (en_rep.c), which
provides better separation and allows future support for other types of vf
representors (e.g. RDMA).
Gal's patches at the end of this serious, provide a simple syntax fix and
two other patches that handles vport ingress/egress ACL steering name
spaces to be aligned with the Firmware/Hardware specs.
V1->V2:
- Addressed coding style comments in patches #1 and #7
- The series is still based on rc4, as now I see net-next is also @rc4.
V2->V3:
- Fixed compilation warning, reported by Dave.
Please pull and let me know if there's any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Gal Pressman [Tue, 28 Nov 2017 09:58:51 +0000 (11:58 +0200)]
net/mlx5: Separate ingress/egress namespaces for each vport
Each vport has its own root flow table for the ACL flow tables and root
flow table is per namespace, therefore we should create a namespace for
each vport.
Mark Bloch [Thu, 7 Dec 2017 21:25:57 +0000 (21:25 +0000)]
net/mlx5: E-Switch, Create generic header struct to be used by representors
Now that we don't store type dependent data in struct mlx5_eswitch_rep
we can create a generic interface, and representor type.
struct mlx5_eswitch_rep will store an array of interfaces, each
interface is used by a different representor type.
Once we moved to a more generic interface, rdma driver representors can
be added and utilize the same mechanism as the Ethernet driver
representors use.
Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
David S. Miller [Thu, 28 Dec 2017 19:28:23 +0000 (14:28 -0500)]
Merge branch 'strparser-Fix-lockdep-issue'
Tom Herbert says:
====================
strparser: Fix lockdep issue
When sock_owned_by_user returns true in strparser. Fix is to add and
call sock_owned_by_user_nocheck since the check for owned by user is
not an error condition in this case.
====================
Fixes: 43a0c6751a322847 ("strparser: Stream parser for messages") Reported-by: syzbot <syzkaller@googlegroups.com> Reported-and-tested-by: <syzbot+c91c53af67f9ebe599a337d2e70950366153b295@syzkaller.appspotmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Thu, 28 Dec 2017 19:00:44 +0000 (11:00 -0800)]
strparser: Call sock_owned_by_user_nocheck
strparser wants to check socket ownership without producing any
warnings. As indicated by the comment in the code, it is permissible
for owned_by_user to return true.
Fixes: 43a0c6751a322847 ("strparser: Stream parser for messages") Reported-by: syzbot <syzkaller@googlegroups.com> Reported-and-tested-by: <syzbot+c91c53af67f9ebe599a337d2e70950366153b295@syzkaller.appspotmail.com> Signed-off-by: Tom Herbert <tom@quantonium.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Thu, 28 Dec 2017 17:38:13 +0000 (12:38 -0500)]
skbuff: in skb_copy_ubufs unclone before releasing zerocopy
skb_copy_ubufs must unclone before it is safe to modify its
skb_shared_info with skb_zcopy_clear.
Commit b90ddd568792 ("skbuff: skb_copy_ubufs must release uarg even
without user frags") ensures that all skbs release their zerocopy
state, even those without frags.
But I forgot an edge case where such an skb arrives that is cloned.
The stack does not build such packets. Vhost/tun skbs have their
frags orphaned before cloning. TCP skbs only attach zerocopy state
when a frag is added.
But if TCP packets can be trimmed or linearized, this might occur.
Tracing the code I found no instance so far (e.g., skb_linearize
ends up calling skb_zcopy_clear if !skb->data_len).
Still, it is non-obvious that no path exists. And it is fragile to
rely on this.
Fixes: b90ddd568792 ("skbuff: skb_copy_ubufs must release uarg even without user frags") Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 28 Dec 2017 17:24:06 +0000 (12:24 -0500)]
Merge branch 'mlx4-misc-for-4.16'
Tariq Toukan says:
====================
mlx4 misc for 4.16
This patchset contains misc cleanups and improvements
to the mlx4 Core and Eth drivers.
In patches 1 and 2 I reduce and reorder the branches in the RX csum flow.
In patch 3 I align the FMR unmapping flow with the device spec, to allow
a remapping afterwards.
Patch 4 by Moni changes the default QoS settings so that a pause
frame stops all traffic regardless of its prio.
Series generated against net-next commit: 836df24a7062 net: hns3: hns3_get_channels() can be static
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
These new settings cause that a pause frame for any prio stops
traffic for all prios.
Fixes: 564c274c3df0 ("net/mlx4_en: DCB QoS support") Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tariq Toukan [Thu, 28 Dec 2017 14:26:10 +0000 (16:26 +0200)]
net/mlx4_core: Cleanup FMR unmapping flow
Remove redundant and not essential operations in fmr unmap/free.
According to device spec, in FMR unmap it is sufficient to set
ownership bit to SW. This allows remapping afterwards.
Fixes: 8ad11fb6b073 ("IB/mlx4: Implement FMRs") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tariq Toukan [Thu, 28 Dec 2017 14:26:08 +0000 (16:26 +0200)]
net/mlx4_en: RX csum, remove redundant branches and checks
Do not check IPv6 bit in cqe status if CONFIG_IPV6 is not enabled.
Function check_csum() is reached only with IPv4 or IPv6 set (if enabled),
if IPv6 is not set (or is not enabled) it is redundant to test the
IPv4 bit.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 28 Dec 2017 15:52:10 +0000 (16:52 +0100)]
net: sched: don't set extack message in case the qdisc will be created
If the qdisc is not found here, it is going to be created. Therefore,
this is not an error path. Remove the extack message set and don't
confuse user with error message in case the qdisc was created
successfully.
Fixes: 09215598119e ("net: sched: sch_api: handle generic qdisc errors") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In commit 42b531de17d2f6 ("tipc: Fix missing connection request
handling"), we replaced unconditional wakeup() with condtional
wakeup for clients with flags POLLIN | POLLRDNORM | POLLRDBAND.
This breaks the applications which do a connect followed by poll
with POLLOUT flag. These applications are not woken when the
connection is ESTABLISHED and hence sleep forever.
In this commit, we fix it by including the POLLOUT event for
sockets in TIPC_CONNECTING state.
Fixes: 42b531de17d2f6 ("tipc: Fix missing connection request handling") Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The PHY patch included in v1 has already separated in:
http://www.spinics.net/lists/netdev/msg454595.html
Changes since v8:
- move operators at the beginning of the line to the end of the previous line
- dt-bindings: add blank lines before mdio and phy subnodes
Changes since v7:
- dt-bindings: fix mdio subnode description
Changes since v6:
- sort the order of local variables from longest to shortest line
- fix ave_probe() which calls register_netdev() at the end of initialization
- dt-bindings: remove phy node descriptions in mdio node
Changes since v5:
- replace license boilerplate with SPDX Identifier
- remove inline directives and an unused function
Changes since v4:
- fix larger integer warning on AVE_PFMBYTE_MASK0
Changes since v3:
- remove checking dma address and use dma_set_mask() to restirct address
- replace ave_mdio_busywait() with read_poll_timeout()
- replace functions to access to registers with readl/writel() directly
- replace a function to access to macaddr with ave_hw_write_macaddr()
- change return value of ave_dma_map() to error value
- move mdiobus_unregister() from ave_remove() to ave_uninit()
- eliminate else block at the end of ave_dma_map()
- add mask definitions for packet filter
- sort bitmap definitions in descending order
- add error check to some functions
- rename and sort functions to clear sub-categories
- fix error value consistency
- remove unneeded initializers
- change type of constant arrays
Changes since v2:
- replace clk_get() with devm_clk_get()
- replace reset_control_get() with devm_reset_control_get_optional_shared()
- add error return when the error occurs on the above *_get functions
- sort soc data and compatible strings
- remove clearly obvious comments
- modify dt-bindings document consistent with these modifications
Changes since v1:
- add/remove devicetree properties and sub-node
- remove "internal-phy-interrupt" and "desc-bits" property
- add SoC data structures based on compatible strings
- add node operation to apply "mdio" sub-node
- add support for features
- add support for {get,set}_pauseparam and pause frame operations
- add support for ndo_get_stats64 instead of ndo_get_stats
- replace with desiable functions
- replace check for valid phy_mode with phy_interface{_mode}_is_rgmii()
- replace phy attach message with phy_attached_info()
- replace 32bit operation with {upper,lower}_32_bits() on ave_wdesc_addr()
- replace nway_reset and get_link with generic functions
- move operations to proper functions
- move phy_start_aneg() to ndo_open,
and remove unnecessary PHY interrupt operations
See http://www.spinics.net/lists/netdev/msg454590.html
- move irq initialization and descriptor memory allocation to ndo_open
- move initialization of reset and clock and mdiobus to ndo_init
- fix skbuffer operations
- fix skb alignment operations and add Rx buffer adjustment for descriptor
See http://www.spinics.net/lists/netdev/msg456014.html
- add error returns when dma_map_single() failed
- clean up code structures
- clean up wait-loop and wake-queue conditions
- add ave_wdesc_addr() and offset definitions
- add ave_macaddr_init() to clean up mac-address operation
- fix checking whether Tx entry is not enough
- fix supported features of phydev
- add necessary free/disable operations
- add phydev check on ave_{get,set}_wol()
- remove netif_carrier functions, phydev initializer, and Tx budget check
- change obsolate codes
- replace ndev->{base_addr,irq} with the members of ave_private
- rename goto labels and mask definitions, and remove unused codes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Kunihiko Hayashi [Thu, 28 Dec 2017 06:58:12 +0000 (15:58 +0900)]
net: ethernet: socionext: add AVE ethernet driver
The UniPhier platform from Socionext provides the AVE ethernet
controller that includes MAC and MDIO bus supporting RGMII/RMII
modes. The controller is named AVE.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Ganesh Goudar [Thu, 28 Dec 2017 06:37:15 +0000 (12:07 +0530)]
cxgb4/cxgb4vf: support for XLAUI Port Type
Add support for new Backplane XLAUI port type.
Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ganesh Goudar [Thu, 28 Dec 2017 05:59:52 +0000 (11:29 +0530)]
cxgb4: display VNI correctly
Fix incorrect VNI display in mps_tcam
Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mark Bloch [Thu, 7 Dec 2017 20:55:10 +0000 (20:55 +0000)]
net/mlx5e: Move ethernet representors data into separate struct
Ethernet representors have a need to store data which is applicable
only for them. Create a priv void pointer in struct mlx5_eswitch_rep
and move mlx5e to store the relevant data there. As part of this change
we also initialize rep_if in mlx5e_rep_register_vf_vports() as otherwise the
E-Switch code will copy a priv value which is garbage.
We also rename mlx5_eswitch_get_uplink_netdev() to
mlx5_eswitch_get_uplink_priv() and make it return void *.
This way E-Switch code doesn't need to deal with net devices and
we leave the task of getting it to mlx5e.
Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Mark Bloch [Thu, 7 Dec 2017 15:36:59 +0000 (15:36 +0000)]
net/mlx5: E-Switch, Create a dedicated send to vport rule deletion function
In order for representors to send packets directly to VFs we use an
E-Switch function which insert special rules into the HW. For symmetry
create an E-Switch function that deletes these rules as well.
Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Mark Bloch [Thu, 7 Dec 2017 15:31:50 +0000 (15:31 +0000)]
net/mlx5: E-Switch, Move mlx5e only logic outside E-Switch
In our pursuit to cleanup e-switch sub-module from mlx5e specific code,
we move the functions that insert/remove the flow steering rules that
allow mlx5e representors to send packets directly to VFs into the EN
driver code.
Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Refactor the init stage of vport representors registration.
vport number and hw id can be assigned by the E-Switch driver and not by
the netdevice driver. While here, make the error path of mlx5_eswitch_init()
a reverse order of the good path, also use kcalloc to allocate an array
instead of kzalloc.
Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Fixes: 482d2e9c1cc7 ("net: hns3: add support to query tqps number") Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Fix incorrect state pruning related to recognition of zero initialized
stack slots, where stacksafe exploration would mistakenly return a
positive pruning verdict too early ignoring other slots, from Gianluca.
2) Various BPF to BPF calls related follow-up fixes. Fix an off-by-one
in maximum call depth check, and rework maximum stack depth tracking
logic to fix a bypass of the total stack size check reported by Jann.
Also fix a bug in arm64 JIT where prog->jited_len was uninitialized.
Addition of various test cases to BPF selftests, from Alexei.
3) Addition of a BPF selftest to test_verifier that is related to BPF to
BPF calls which demonstrates a late caller stack size increase and
thus out of bounds access. Fixed above in 2). Test case from Jann.
4) Addition of correlating BPF helper calls, BPF to BPF calls as well
as BPF maps to bpftool xlated dump in order to allow for better
BPF program introspection and debugging, from Daniel.
5) Fixing several bugs in BPF to BPF calls kallsyms handling in order
to get it actually to work for subprogs, from Daniel.
6) Extending sparc64 JIT support for BPF to BPF calls and fix a couple
of build errors for libbpf on sparc64, from David.
7) Allow narrower context access for BPF dev cgroup typed programs in
order to adapt to LLVM code generation. Also adjust memlock rlimit
in the test_dev_cgroup BPF selftest, from Yonghong.
8) Add netdevsim Kconfig entry to BPF selftests since test_offload.py
relies on netdevsim device being available, from Jakub.
9) Reduce scope of xdp_do_generic_redirect_map() to being static,
from Xiongwei.
10) Minor cleanups and spelling fixes in BPF verifier, from Colin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 27 Dec 2017 23:36:49 +0000 (15:36 -0800)]
nfp: bpf: allocate vNIC priv for keeping track of the offloaded program
After TC offloads were converted to callbacks we have no choice
but keep track of the offloaded filter in the driver.
Since this change came a little late in the release cycle
there were a number of conflicts and allocation of vNIC priv
structure seems to have slipped away in linux-next.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Two small fixes for bpftool. Fix otherwise broken output if any of
the system calls failed when listing maps in json format and instead
of bailing out, skip maps or progs that disappeared between fetching
next id and getting an fd for that id, both from Jakub.
2) Small fix in BPF selftests to respect LLC passed from command line
when testing for -mcpu=probe presence, from Quentin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Nitzan Carmi [Tue, 26 Dec 2017 09:20:20 +0000 (11:20 +0200)]
IB/mlx5: Fix mlx5_ib_alloc_mr error flow
ibmr.device is being set only after ib_alloc_mr() is
(successfully) complete. Therefore, in case mlx5_core_create_mkey()
return with error, the error flow calls mlx5_free_priv_descs()
which uses ibmr.device (which doesn't exist yet), causing
a NULL dereference oops.
To fix this, the IB device should be set in the mr struct earlier
stage (e.g. prior to calling mlx5_core_create_mkey()).
Fixes: 8a187ee52b04 ("IB/mlx5: Support the new memory registration API") Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Nitzan Carmi <nitzanc@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Moni Shoua [Sun, 24 Dec 2017 11:54:58 +0000 (13:54 +0200)]
IB/core: Verify that QP is security enabled in create and destroy
The XRC target QP create flow sets up qp_sec only if there is an IB link with
LSM security enabled. However, several other related uAPI entry points blindly
follow the qp_sec NULL pointer, resulting in a possible oops.
Check for NULL before using qp_sec.
Cc: <stable@vger.kernel.org> # v4.12 Fixes: d291f1a65232 ("IB/core: Enforce PKey security on QPs") Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Moni Shoua [Sun, 24 Dec 2017 11:54:57 +0000 (13:54 +0200)]
IB/uverbs: Fix command checking as part of ib_uverbs_ex_modify_qp()
If the input command length is larger than the kernel supports an error should
be returned in case the unsupported bytes are not cleared, instead of the
other way aroudn. This matches what all other callers of ib_is_udata_cleared
do and will avoid user ABI problems in the future.
Cc: <stable@vger.kernel.org> # v4.10 Fixes: 189aba99e700 ("IB/uverbs: Extend modify_qp and support packet pacing") Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Majd Dibbiny [Sun, 24 Dec 2017 11:54:56 +0000 (13:54 +0200)]
IB/mlx5: Serialize access to the VMA list
User-space applications can do mmap and munmap directly at
any time.
Since the VMA list is not protected with a mutex, concurrent
accesses to the VMA list from the mmap and munmap can cause
data corruption. Add a mutex around the list.
Cc: <stable@vger.kernel.org> # v4.7 Fixes: 7c2344c3bbf9 ("IB/mlx5: Implements disassociate_ucontext API") Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Yafang Shao [Sun, 24 Dec 2017 15:10:39 +0000 (23:10 +0800)]
net/trace: fix printk format in inet_sock_set_state
There's a space character missed in the printk messages.
Put the message into one line could simplify searching for
the messages in the kernel source.
Fixes: 563e0bb0dc74("net: tracepoint: replace tcp_set_state tracepoint with inet_sock_set_state tracepoint") Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 27 Dec 2017 21:44:14 +0000 (16:44 -0500)]
Merge branch 'net-zerocopy-refine'
Willem de Bruijn says:
====================
zerocopy refinements
1/4 is a small optimization follow-up to the earlier fix to skb_segment:
check skb state once per skb, instead of once per frag.
2/4 makes behavior more consistent between standard and zerocopy send:
set the PSH bit when hitting MAX_SKB_FRAGS. This helps GRO.
3/4 resolves a surprising inconsistency in notification:
because small packets were not stored in frags, they would not set
the copied error code over loopback. This change also optimizes
the path by removing copying and making tso_fragment cheaper.
4/4 follows-up to 3/4 by no longer allocated now unused memory.
this was actually already in RFC patches, but dropped as I pared
down the patch set during revisions.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Sat, 23 Dec 2017 00:00:19 +0000 (19:00 -0500)]
tcp: place all zerocopy payload in frags
This avoids an unnecessary copy of 1-2KB and improves tso_fragment,
which has to fall back to tcp_fragment if skb->len != skb_data_len.
It also avoids a surprising inconsistency in notifications:
Zerocopy packets sent over loopback have their frags copied, so set
SO_EE_CODE_ZEROCOPY_COPIED in the notification. But this currently
does not happen for small packets, because when all data fits in the
linear fragment, data is not copied in skb_orphan_frags_rx.
Reported-by: Tom Deseyn <tom.deseyn@gmail.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Sat, 23 Dec 2017 00:00:18 +0000 (19:00 -0500)]
tcp: push full zerocopy packets
Skbs that reach MAX_SKB_FRAGS cannot be extended further. Do the
same for zerocopy frags as non-zerocopy frags and set the PSH bit.
This improves GRO assembly.
Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Sat, 23 Dec 2017 00:00:17 +0000 (19:00 -0500)]
skbuff: in skb_segment, call zerocopy functions once per nskb
This is a net-next follow-up to commit 268b79067942 ("skbuff: orphan
frags before zerocopy clone"), which fixed a bug in net, but added a
call to skb_zerocopy_clone at each frag to do so.
When segmenting skbs with user frags, either the user frags must be
replaced with private copies and uarg released, or the uarg must have
its refcount increased for each new skb.
skb_orphan_frags does the first, except for cases that can handle
reference counting. skb_zerocopy_clone then does the second.
Call these once per nskb, instead of once per frag.
That is, in the common case. With a frag list, also refresh when the
origin skb (frag_skb) changes.
Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 27 Dec 2017 21:06:57 +0000 (13:06 -0800)]
Merge tag 'trace-v4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"While doing tests on tracing over the network, I found that the
packets were getting corrupted.
In the process I found three bugs.
One was the culprit, but the other two scared me. After deeper
investigation, they were not as major as I thought they were, due to a
signed compared to an unsigned that prevented a negative number from
doing actual harm.
The two bigger bugs:
- Mask the ring buffer data page length. There are data flags at the
high bits of the length field. These were not cleared via the
length function, and the length could return a negative number.
(Although the number returned was unsigned, but was assigned to a
signed number) Luckily, this value was compared to PAGE_SIZE which
is unsigned and kept it from entering the path that could have
caused damage.
- Check the page usage before reusing the ring buffer reader page.
TCP increments the page ref when passing the page off to the
network. The page is passed back to the ring buffer for use on
free. But the page could still be in use by the TCP stack.
Minor bugs:
- Related to the first bug. No need to clear out the unused ring
buffer data before sending to user space. It is now done by the
ring buffer code itself.
- Reset pointers after free on error path. There were some cases in
the error path that pointers were freed but not set to NULL, and
could have them freed again, having a pointer freed twice"
* tag 'trace-v4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix possible double free on failure of allocating trace buffer
tracing: Fix crash when it fails to alloc ring buffer
ring-buffer: Do no reuse reader page if still in use
tracing: Remove extra zeroing out of the ring buffer page
ring-buffer: Mask out the info bits when returning buffer page length
Linus Torvalds [Wed, 27 Dec 2017 20:59:27 +0000 (12:59 -0800)]
Merge tag 'sound-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"It seems that Santa overslept with a bunch of gifts; the majority of
changes here are various device-specific ASoC fixes, most notably the
revert of rcar IOMMU support and fsl_ssi AC97 fixes, but also lots of
small fixes for codecs. Besides that, the usual HD-audio quirks and
fixes are included, too"
* tag 'sound-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (31 commits)
ALSA: hda - Fix missing COEF init for ALC225/295/299
ALSA: hda: Drop useless WARN_ON()
ALSA: hda - change the location for one mic on a Lenovo machine
ALSA: hda - fix headset mic detection issue on a Dell machine
ALSA: hda - Add MIC_NO_PRESENCE fixup for 2 HP machines
ASoC: rsnd: fixup ADG register mask
ASoC: rt5514-spi: only enable wakeup when fully initialized
ASoC: nau8825: fix issue that pop noise when start capture
ASoC: rt5663: Fix the wrong result of the first jack detection
ASoC: rsnd: ssi: fix race condition in rsnd_ssi_pointer_update
ASoC: Intel: Change kern log level to avoid unwanted messages
ASoC: atmel-classd: select correct Kconfig symbol
ASoC: wm_adsp: Fix validation of firmware and coeff lengths
ASoC: Intel: Skylake: Do not check dev_type for dmic link type
ASoC: rockchip: disable clock on error
ASoC: tlv320aic31xx: Fix GPIO1 register definition
ASoC: codecs: msm8916-wcd: Fix supported formats
ASoC: fsl_asrc: Fix typo in a field define
ASoC: rsnd: ssiu: clear SSI_MODE for non TDM Extended modes
ASoC: da7218: Correct IRQ level in DT binding example
...
Matthieu CASTET [Tue, 12 Dec 2017 10:10:44 +0000 (11:10 +0100)]
led: core: Fix brightness setting when setting delay_off=0
With the current code, the following sequence won't work :
echo timer > trigger
echo 0 > delay_off
* at this point we call
** led_delay_off_store
** led_blink_set
*** stop timer
** led_blink_setup
** led_set_software_blink
*** if !delay_on, led off
*** if !delay_off, set led_set_brightness_nosleep <--- LED_BLINK_SW is set but timer is stop
*** otherwise start timer/set LED_BLINK_SW flag
echo xxx > brightness
* led_set_brightness
** if LED_BLINK_SW
*** if brightness=0, led off
*** else apply brightness if next timer <--- timer is stop, and will never apply new setting
** otherwise set led_set_brightness_nosleep
To fix that, when we delete the timer, we should clear LED_BLINK_SW.
Cc: linux-leds@vger.kernel.org Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
tracing: Fix possible double free on failure of allocating trace buffer
Jing Xia and Chunyan Zhang reported that on failing to allocate part of the
tracing buffer, memory is freed, but the pointers that point to them are not
initialized back to NULL, and later paths may try to free the freed memory
again. Jing and Chunyan fixed one of the locations that does this, but
missed a spot.
Jing Xia [Tue, 26 Dec 2017 07:12:53 +0000 (15:12 +0800)]
tracing: Fix crash when it fails to alloc ring buffer
Double free of the ring buffer happens when it fails to alloc new
ring buffer instance for max_buffer if TRACER_MAX_TRACE is configured.
The root cause is that the pointer is not set to NULL after the buffer
is freed in allocate_trace_buffers(), and the freeing of the ring
buffer is invoked again later if the pointer is not equal to Null,
as:
//if trace_buffer is not null, free again
|-ring_buffer_free(buf->buffer)
|-rb_free_cpu_buffer(buffer->buffers[cpu])
// ring_buffer_per_cpu is null, and
// crash in ring_buffer_per_cpu->pages
ring-buffer: Do no reuse reader page if still in use
To free the reader page that is allocated with ring_buffer_alloc_read_page(),
ring_buffer_free_read_page() must be called. For faster performance, this
page can be reused by the ring buffer to avoid having to free and allocate
new pages.
The issue arises when the page is used with a splice pipe into the
networking code. The networking code may up the page counter for the page,
and keep it active while sending it is queued to go to the network. The
incrementing of the page ref does not prevent it from being reused in the
ring buffer, and this can cause the page that is being sent out to the
network to be modified before it is sent by reading new data.
Add a check to the page ref counter, and only reuse the page if it is not
being used anywhere else.
Cc: stable@vger.kernel.org Fixes: 73a757e63114d ("ring-buffer: Return reader page back into existing ring buffer") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
tracing: Remove extra zeroing out of the ring buffer page
The ring_buffer_read_page() takes care of zeroing out any extra data in the
page that it returns. There's no need to zero it out again from the
consumer. It was removed from one consumer of this function, but
read_buffers_splice_read() did not remove it, and worse, it contained a
nasty bug because of it.
Cc: stable@vger.kernel.org Fixes: 2711ca237a084 ("ring-buffer: Move zeroing out excess in page to ring buffer code") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Dave Airlie [Wed, 27 Dec 2017 19:20:07 +0000 (05:20 +1000)]
Merge tag 'drm-intel-fixes-2017-12-22-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
GLK pipe C related fix, and a gvt fix.
* tag 'drm-intel-fixes-2017-12-22-1' of git://anongit.freedesktop.org/drm/drm-intel:
i915: Reject CCS modifiers for pipe C on Geminilake
drm/i915/gvt: Fix pipe A enable as default for vgpu
ring-buffer: Mask out the info bits when returning buffer page length
Two info bits were added to the "commit" part of the ring buffer data page
when returned to be consumed. This was to inform the user space readers that
events have been missed, and that the count may be stored at the end of the
page.
What wasn't handled, was the splice code that actually called a function to
return the length of the data in order to zero out the rest of the page
before sending it up to user space. These data bits were returned with the
length making the value negative, and that negative value was not checked.
It was compared to PAGE_SIZE, and only used if the size was less than
PAGE_SIZE. Luckily PAGE_SIZE is unsigned long which made the compare an
unsigned compare, meaning the negative size value did not end up causing a
large portion of memory to be randomly zeroed out.
Cc: stable@vger.kernel.org Fixes: 66a8cb95ed040 ("ring-buffer: Add place holder recording of dropped events") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Tonghao Zhang [Fri, 22 Dec 2017 18:15:20 +0000 (10:15 -0800)]
sctp: Replace use of sockets_allocated with specified macro.
The patch(180d8cd942ce) replaces all uses of struct sock fields'
memory_pressure, memory_allocated, sockets_allocated, and sysctl_mem
to accessor macros. But the sockets_allocated field of sctp sock is
not replaced at all. Then replace it now for unifying the code.
Fixes: 180d8cd942ce ("foundations of per-cgroup memory pressure controlling.") Cc: Glauber Costa <glommer@parallels.com> Signed-off-by: Tonghao Zhang <zhangtonghao@didichuxing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 27 Dec 2017 18:37:28 +0000 (13:37 -0500)]
Merge branch 'rds-bug-fixes'
Sowmini Varadhan says:
====================
rds bug fixes
Ran into pre-existing bugs when working on the fix for
https://www.spinics.net/lists/netdev/msg472849.html
The bugs fixed in this patchset are unrelated to the syzbot
failure (which I'm still testing and trying to reproduce) but
meanwhile, let's get these fixes out of the way.
V2: target net-next (rds:tcp patches have a dependancy on
changes that are in net-next, but not yet in net)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sowmini Varadhan [Fri, 22 Dec 2017 17:39:01 +0000 (09:39 -0800)]
rds: tcp: cleanup if kmem_cache_alloc fails in rds_tcp_conn_alloc()
If kmem_cache_alloc() fails in the middle of the for() loop,
cleanup anything that might have been allocated so far.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sowmini Varadhan [Fri, 22 Dec 2017 17:39:00 +0000 (09:39 -0800)]
rds: tcp: initialize t_tcp_detached to false
Commit f10b4cff98c6 ("rds: tcp: atomically purge entries from
rds_tcp_conn_list during netns delete") adds the field t_tcp_detached,
but this needs to be initialized explicitly to false.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sowmini Varadhan [Fri, 22 Dec 2017 17:38:59 +0000 (09:38 -0800)]
rds; Reset rs->rs_bound_addr in rds_add_bound() failure path
If the rds_sock is not added to the bind_hash_table, we must
reset rs_bound_addr so that rds_remove_bound will not trip on
this rds_sock.
rds_add_bound() does a rds_sock_put() in this failure path, so
failing to reset rs_bound_addr will result in a socket refcount
bug, and will trigger a WARN_ON with the stack shown below when
the application subsequently tries to close the PF_RDS socket.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sudip Mukherjee [Fri, 22 Dec 2017 15:52:05 +0000 (15:52 +0000)]
net: sch: api: fix tcf_block_get
The build of mips bcm47xx_defconfig is failing with the error:
net/sched/sch_fq_codel.c: In function 'fq_codel_init':
net/sched/sch_fq_codel.c:487:8: error:
too many arguments to function 'tcf_block_get'
While adding the extack support, the commit missed adding it in the
headers when CONFIG_NET_CLS is not defined.
Fixes: 8d1a77f974ca ("net: sch: api: add extack support in tcf_block_get") Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Wed, 27 Dec 2017 17:36:23 +0000 (18:36 +0100)]
Merge branch 'bpf-stack-depth-tracking-fixes'
Alexei Starovoitov says:
====================
Jann reported an issue with stack depth tracking. Fix it and add tests.
Also fix off-by-one error in MAX_CALL_FRAMES check. This set is on top
of Jann's "selftest for late caller stack size increase" test.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Instead of computing max stack depth for current call chain
during the main verifier pass track stack depth of each
function independently and after do_check() is done do
another pass over all instructions analyzing depth
of all possible call stacks.
Fixes: f4d7e40a5b71 ("bpf: introduce function calls (verification)") Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Jann Horn [Fri, 22 Dec 2017 18:12:35 +0000 (19:12 +0100)]
bpf: selftest for late caller stack size increase
This checks that it is not possible to bypass the total stack size check in
update_stack_depth() by calling a function that uses a large amount of
stack memory *before* using a large amount of stack memory in the caller.
Currently, the first added testcase causes a rejection as expected, but
the second testcase is (AFAICS incorrectly) accepted:
[...]
#483/p calls: stack overflow using two frames (post-call access) FAIL
Unexpected success to load!
0: (85) call pc+2
caller:
R10=fp0,call_-1
callee:
frame1: R1=ctx(id=0,off=0,imm=0) R10=fp0,call_0
3: (72) *(u8 *)(r10 -300) = 0
4: (b7) r0 = 0
5: (95) exit
returning from callee:
frame1: R0_w=inv0 R1=ctx(id=0,off=0,imm=0) R10=fp0,call_0
to caller at 1:
R0_w=inv0 R10=fp0,call_-1
bnx2x: Improve reliability in case of nested PCI errors
While in recovery process of PCI error (called EEH on PowerPC arch),
another PCI transaction could be corrupted causing a situation of
nested PCI errors. Also, this scenario could be reproduced with
error injection mechanisms (for debug purposes).
We observe that in case of nested PCI errors, bnx2x might attempt to
initialize its shmem and cause a kernel crash due to bad addresses
read from MCP. Multiple different stack traces were observed depending
on the point the second PCI error happens.
This patch avoids the crashes by:
* failing PCI recovery in case of nested errors (since multiple
PCI errors in a row are not expected to lead to a functional
adapter anyway), and by,
* preventing access to adapter FW when MCP is failed (we mark it as
failed when shmem cannot get initialized properly).
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Acked-by: Shahed Shaikh <Shahed.Shaikh@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patchset add peer_offset configuration parameter in order to
specify two different values for payload offset on tx/rx side.
Moreover fix missing print session offset info
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Fri, 22 Dec 2017 14:10:18 +0000 (15:10 +0100)]
l2tp: add peer_offset parameter
Introduce peer_offset parameter in order to add the capability
to specify two different values for payload offset on tx/rx side.
If just offset is provided by userspace use it for rx side as well
in order to maintain compatibility with older l2tp versions
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Fri, 22 Dec 2017 14:10:17 +0000 (15:10 +0100)]
l2tp: fix missing print session offset info
Report offset parameter in L2TP_CMD_SESSION_GET command if
it has been configured by userspace
Fixes: 309795f4bec ("l2tp: Add netlink control API for L2TP") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
A customer noticed RX path hang when MTU is changed on the fly while
running heavy traffic with NCSI enabled for 5717 and 5719. Since 5720
belongs to same ASIC family, we observed same issue and same fix
could solve this problem for 5720.
Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
One of AMD based server with 5762 hangs with jumbo frame traffic.
This AMD platform has southbridge limitation which is restricting MRRS
to 4000. As a work around, driver to restricts the MRRS to 2048 for
this particular 5762 NX1 card.
Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
1) Check for valid id proto in validate_tmpl(), otherwise
we may trigger a warning in xfrm_state_fini().
From Cong Wang.
2) Fix a typo on XFRMA_OUTPUT_MARK policy attribute.
From Michal Kubecek.
3) Verify the state is valid when encap_type < 0,
otherwise we may crash on IPsec GRO .
From Aviv Heller.
4) Fix stack-out-of-bounds read on socket policy lookup.
We access the flowi of the wrong address family in the
IPv4 mapped IPv6 case, fix this by catching address
family missmatches before we do the lookup.
5) fix xfrm_do_migrate() with AEAD to copy the geniv
field too. Otherwise the state is not fully initialized
and migration fails. From Antony Antony.
6) Fix stack-out-of-bounds with misconfigured transport
mode policies. Our policy template validation is not
strict enough. It is possible to configure policies
with transport mode template where the address family
of the template does not match the selectors address
family. Fix this by refusing such a configuration,
address family can not change on transport mode.
7) Fix a policy reference leak when reusing pcpu xdst
entry. From Florian Westphal.
8) Reinject transport-mode packets through tasklet,
otherwise it is possible to reate a recursion
loop. From Herbert Xu.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fugang Duan [Fri, 22 Dec 2017 09:12:09 +0000 (17:12 +0800)]
net: fec: unmap the xmit buffer that are not transferred by DMA
The enet IP only support 32 bit, it will use swiotlb buffer to do dma
mapping when xmit buffer DMA memory address is bigger than 4G in i.MX
platform. After stress suspend/resume test, it will print out:
log:
[12826.352864] fec 5b040000.ethernet: swiotlb buffer is full (sz: 191 bytes)
[12826.359676] DMA: Out of SW-IOMMU space for 191 bytes at device 5b040000.ethernet
[12826.367110] fec 5b040000.ethernet eth0: Tx DMA memory map failed
The issue is that the ready xmit buffers that are dma mapped but DMA still
don't copy them into fifo, once MAC restart, these DMA buffers are not unmapped.
So it should check the dma mapping buffer and unmap them.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / mirror_ubuntu-eoan-kernel.git / log