David Ahern [Wed, 10 Jul 2019 21:07:42 +0000 (14:07 -0700)]
Merge branch 'tc-mpls-action' into next
John Hurley says:
====================
Recent kernel additions to TC allows the manipulation of MPLS headers as
filter actions.
The following patchset creates an iproute2 interface to the new actions
and includes documentation on how to use it.
v1->v2:
- change error from print_string() to fprintf(strerr,) (Stephen Hemminger)
- split long line in explain() message (David Ahern)
- use _SL_ instead of /n in print message (David Ahern)
John Hurley [Wed, 10 Jul 2019 12:40:40 +0000 (13:40 +0100)]
man: update man pages for TC MPLS actions
Add a man page describing the newly added TC mpls manipulation actions.
Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David Ahern <dsahern@gmail.com>
John Hurley [Wed, 10 Jul 2019 12:40:39 +0000 (13:40 +0100)]
tc: add mpls actions
Create a new action type for TC that allows the pushing, popping, and
modifying of MPLS headers.
Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David Ahern <dsahern@gmail.com>
John Hurley [Wed, 10 Jul 2019 12:40:38 +0000 (13:40 +0100)]
lib: add mpls_uc and mpls_mc as link layer protocol names
Update the llproto_names array to allow users to reference the mpls
protocol ids with the names 'mpls_uc' for unicast MPLS and 'mpls_mc' for
multicast.
Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David Ahern <dsahern@gmail.com>
devlink: Introduce PCI PF and VF port flavour and attribute
Introduce PCI PF and VF port flavour and port attributes such as PF
number and VF number.
$ devlink port show
pci/0000:05:00.0/0: type eth netdev eth0 flavour pcipf pfnum 0
pci/0000:05:00.0/1: type eth netdev eth1 flavour pcivf pfnum 0 vfnum 0
pci/0000:05:00.0/2: type eth netdev eth2 flavour pcivf pfnum 0 vfnum 1
Vincent Bernat [Sun, 7 Jul 2019 17:51:15 +0000 (19:51 +0200)]
ip: bond: add peer notification delay support
Ability to tweak the delay between gratuitous ND/ARP packets has been
added in kernel commit 07a4ddec3ce9 ("bonding: add an option to
specify a delay between peer notifications"), through
IFLA_BOND_PEER_NOTIF_DELAY attribute. Add support to set and show this
value.
Example:
$ ip -d link set bond0 type bond peer_notify_delay 1000
$ ip -d link l dev bond0
2: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP mode DEFAULT group default qlen 1000
link/ether 50:54:33:00:00:01 brd ff:ff:ff:ff:ff:ff
bond mode active-backup active_slave eth0 miimon 100 updelay 0
downdelay 0 peer_notify_delay 1000 use_carrier 1 arp_interval 0
arp_validate none arp_all_targets any primary eth0
primary_reselect always fail_over_mac active xmit_hash_policy
layer2 resend_igmp 1 num_grat_arp 5 all_slaves_active 0 min_links
0 lp_interval 1 packets_per_slave 1 lacp_rate slow ad_select
stable tlb_dynamic_lb 1 addrgenmode eu
Signed-off-by: Vincent Bernat <vincent@bernat.ch> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David Ahern <dsahern@gmail.com>
David Ahern [Tue, 9 Jul 2019 21:54:34 +0000 (14:54 -0700)]
ss: Change resolve_services to numeric
Commit ca697cee4cfc ("ip: add a new parameter -Numeric") changed
!resolve_services to numeric in ss.c.
A commit in master: d791e75d74ff ("ss: in --numeric mode, print raw numbers for data rates")
added another reference to !resolve_services. Convert it to numeric.
Andrea Claudi [Thu, 27 Jun 2019 14:47:45 +0000 (16:47 +0200)]
tc: netem: fix r parameter in Bernoulli loss model
As the man page for tc netem states:
To use the Bernoulli model, the only needed parameter is p while the
others will be set to the default values r=1-p, 1-h=1 and 1-k=0.
However r parameter is erroneusly set to 1, and not to 1-p.
Fix this using the same approach of the 4-state loss model.
Fixes: 3c7950af598be ("netem: add support for 4 state and GE loss model") Signed-off-by: Andrea Claudi <aclaudi@redhat.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Denis Kirjanov [Fri, 28 Jun 2019 09:54:25 +0000 (11:54 +0200)]
ipaddress: correctly print a VF hw address in the IPoIB case
Current code assumes that we print ethernet mac and
that doesn't work in the IPoIB case with SRIOV-enabled hardware
Before:
11: ib1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc pfifo_fast
state UP mode DEFAULT group default qlen 256
link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
vf 0 MAC 14:80:00:00:66:fe, spoof checking off, link-state
disable,
trust off, query_rss off
...
After:
11: ib1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc pfifo_fast
state UP mode DEFAULT group default qlen 256
link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
vf 0 link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff, spoof
checking off, link-state disable, trust off, query_rss off
v1->v2: updated kernel headers to uapi commit
v2->v3: fixed alignment
v3->v4: aligned print statements as used through the source
Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David Ahern <dsahern@gmail.com>
[ committer note: flipped argument order for print_vfinfo to keep fp first
and fixed alignment issues ]
Hoang Le [Tue, 25 Jun 2019 04:34:39 +0000 (11:34 +0700)]
tipc: support interface name when activating UDP bearer
Support for indicating interface name has an ip address in parallel
with specifying ip address when activating UDP bearer.
This liberates the user from keeping track of the current ip address
for each device.
Old command syntax:
$tipc bearer enable media udp name NAME localip IP
New command syntax:
$tipc bearer enable media udp name NAME [localip IP|dev DEVICE]
v2:
- Removed initial value for fd
- Fixed the returning value for cmd_bearer_validate_and_get_addr
to make its consistent with using: zero or non-zero
v3: - Switch to use helper 'get_ifname' to retrieve interface name
v4: - Replace legacy SIOCGIFADDR by netlink
v5: - Fix leaky rtnl_handle
Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David Ahern <dsahern@gmail.com>
Baruch Siach [Thu, 27 Jun 2019 18:37:19 +0000 (21:37 +0300)]
devlink: fix libc and kernel headers collision
Since commit 2f1242efe9d ("devlink: Add devlink health show command") we
use the sys/sysinfo.h header for the sysinfo(2) system call. But since
iproute2 carries a local version of the kernel struct sysinfo, this
causes a collision with libc that do not rely on kernel defined sysinfo
like musl libc:
In file included from devlink.c:25:0:
.../sysroot/usr/include/sys/sysinfo.h:10:8: error: redefinition of 'struct sysinfo'
struct sysinfo {
^~~~~~~
In file included from ../include/uapi/linux/kernel.h:5:0,
from ../include/uapi/linux/netlink.h:5,
from ../include/uapi/linux/genetlink.h:6,
from devlink.c:21:
../include/uapi/linux/sysinfo.h:8:8: note: originally defined here
struct sysinfo {
^~~~~~~
Move the sys/sysinfo.h userspace header before kernel headers, and
suppress the indirect include of linux/sysinfo.h.
Cc: Aya Levin <ayal@mellanox.com> Cc: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Baruch Siach [Thu, 27 Jun 2019 18:37:18 +0000 (21:37 +0300)]
devlink: fix format string warning for 32bit targets
32bit targets define uint64_t as long long unsigned. This leads to the
following build warning:
devlink.c: In function ‘pr_out_u64’:
devlink.c:1729:11: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 4 has type ‘uint64_t {aka long long unsigned int}’ [-Wformat=]
pr_out("%s %lu", name, val);
^
devlink.c:59:21: note: in definition of macro ‘pr_out’
fprintf(stdout, ##args); \
^~~~
Use uint64_t specific conversion specifiers in the format string to fix
that.
Cc: Aya Levin <ayal@mellanox.com> Cc: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Andrea Claudi [Tue, 25 Jun 2019 10:29:57 +0000 (12:29 +0200)]
ip address: do not set mngtmpaddr option for IPv4 addresses
'mngtmpaddr' option make the kernel manage temporary addresses
created from the specified one as template on behalf of Privacy
Extensions (RFC3041). This option should be available only for
IPv6 addresses, as correctly stated in the manpage.
However it is possible to set mngtmpaddr on IPv4 addresses, too:
$ ip link add dummy0 type dummy
$ ip -4 addr add 192.168.1.1 dev dummy0 mngtmpaddr
$ ip a
1: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 1a:6d:c6:96:ca:f8 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.1/32 scope global mngtmpaddr dummy0
valid_lft forever preferred_lft forever
Fix this adding a check on the protocol family before setting
IFA_F_MANAGETEMPADDR flag.
Fixes: 5b7e21c417bea ("add support for IFA_F_MANAGETEMPADDR") Signed-off-by: Andrea Claudi <aclaudi@redhat.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Andrea Claudi [Tue, 25 Jun 2019 10:29:56 +0000 (12:29 +0200)]
ip address: do not set home option for IPv4 addresses
'home' option designates a IPv6 address as "home address" as
defined in RFC 6275. This option should be available only for
IPv6 addresses, as correctly stated in the manpage.
However it is possible to set home on IPv4 addresses, too:
$ ip link add dummy0 type dummy
$ ip -4 addr add 192.168.1.1 dev dummy0 home
$ ip a
1: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 1a:6d:c6:96:ca:f8 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.1/32 scope global home dummy0
valid_lft forever preferred_lft forever
Fix this adding a check on the protocol family before setting
IFA_F_HOMEADDRESS flag.
Fixes: bac735c53a36d ("enabled to manipulate the flags of IFA_F_HOMEADDRESS or IFA_F_NODAD from ip.") Signed-off-by: Andrea Claudi <aclaudi@redhat.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Andrea Claudi [Tue, 25 Jun 2019 10:29:55 +0000 (12:29 +0200)]
ip address: do not set nodad option for IPv4 addresses
Duplicate Address Detection (RFC 4862) is available only for IPv6
addresses. As a consequence, 'nodad' option, turning it off, should
be available only for IPv6, and is defined like that in the man page.
However it is possible to set nodad on IPv4 addresses, too:
$ ip link add dummy0 type dummy
$ ip -4 addr add 192.168.1.1 dev dummy0 nodad
$ ip a
1: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 1a:6d:c6:96:ca:f8 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.1/32 scope global nodad dummy0
valid_lft forever preferred_lft forever
Fix this adding a check on the protocol family before setting
IFA_F_NODAD flag.
Fixes: bac735c53a36d ("enabled to manipulate the flags of IFA_F_HOMEADDRESS or IFA_F_NODAD from ip.") Signed-off-by: Andrea Claudi <aclaudi@redhat.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Stefano Brivio [Tue, 25 Jun 2019 11:41:24 +0000 (13:41 +0200)]
iproute: Set flags and attributes on dump to get IPv6 cached routes to be flushed
With a current (5.1) kernel version, IPv6 exception routes can't be listed
(ip -6 route list cache) or flushed (ip -6 route flush cache). Kernel
support for this is being added back. Relevant net-next commits:
564c91f7e563 fib_frontend, ip6_fib: Select routes or exceptions dump from RTM_F_CLONED ef11209d4219 Revert "net/ipv6: Bail early if user only wants cloned entries" 3401bfb1638e ipv6/route: Don't match on fc_nh_id if not set in ip6_route_del() bf9a8a061ddc ipv6/route: Change return code of rt6_dump_route() for partial node dumps 1e47b4837f3b ipv6: Dump route exceptions if requested 40cb35d5dc04 ip6_fib: Don't discard nodes with valid routing information in fib6_locate_1()
However, to allow the kernel to filter routes based on the RTM_F_CLONED
flag, we need to make sure this flag is always passed when we want cached
routes to be dumped, and we can also pass table and output interface
attributes to have the kernel filtering on them, if requested by the user.
Use the existing iproute_dump_filter() as a filter for the dump request in
iproute_flush(). This way, 'ip -6 route flush cache' works again.
v2: Instead of creating a separate 'filter' function dealing with
RTM_F_CACHED only, use the existing iproute_dump_filter() and get
table and oif kernel filtering for free. Suggested by David Ahern.
Hangbin Liu [Wed, 26 Jun 2019 01:44:07 +0000 (09:44 +0800)]
ip/iptoken: fix dump error when ipv6 disabled
When we disable IPv6 from the start up (ipv6.disable=1), there will be
no IPv6 route info in the dump message. If we return -1 when
ifi->ifi_family != AF_INET6, we will get error like
$ ip token list
Dump terminated
which will make user feel confused. There is no need to return -1 if the
dump message not match. Return 0 is enough.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Eyal Birger [Mon, 24 Jun 2019 15:14:57 +0000 (18:14 +0300)]
tc: adjust xtables_match and xtables_target to changes in recent iptables
iptables commit 933400b37d09 ("nft: xtables: add the infrastructure to translate from iptables to nft")
added an additional member to struct xtables_match and struct xtables_target.
This change is available for libxtables12 and up.
Add these members conditionally to support both newer and older versions.
Fixes: dd29621578d2 ("tc: add em_ipt ematch for calling xtables matches from tc matching context") Signed-off-by: Eyal Birger <eyal.birger@gmail.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Jakub Kicinski [Tue, 18 Jun 2019 00:49:29 +0000 (17:49 -0700)]
tc: q_netem: JSON-ify the output
Add JSON output support to q_netem.
The normal output is untouched.
In JSON output always use seconds as the base of time units,
and non-percentage numbers (0.01 instead of 1%). Try to always
report the fields, even if they are zero.
All this should make the output more machine-friendly.
v2: less macroes
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: David Ahern <dsahern@gmail.com>
Matteo Croce [Tue, 18 Jun 2019 14:49:35 +0000 (16:49 +0200)]
netns: make netns_{save,restore} static
The netns_{save,restore} functions are only used in ipnetns.c now, since
the restore is not needed anymore after the netns exec command.
Move them in ipnetns.c, and make them static.
Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Matteo Croce [Tue, 18 Jun 2019 14:49:34 +0000 (16:49 +0200)]
ip vrf: use hook to change VRF in the child
On vrf exec, reset the VRF associations in the child process, via the
new hook added to cmd_exec(). In this way, the parent doesn't have to
reset the VRF associations before spawning other processes.
Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Matteo Croce [Tue, 18 Jun 2019 14:49:33 +0000 (16:49 +0200)]
netns: switch netns in the child when executing commands
'ip netns exec' changes the current netns just before executing a child
process, and restores it after forking. This is needed if we're running
in batch or do_all mode.
Some cleanups must be done both in the parent and in the child: the
parent must restore the previous netns, while the child must reset any
VRF association.
Unfortunately, if do_all is set, the VRF are not reset in the child, and
the spawned processes are started with the wrong VRF context. This can
be triggered with this script:
# ip -b - <<-'EOF'
link add type vrf table 100
link set vrf0 up
link add type dummy
link set dummy0 vrf vrf0 up
netns add ns1
EOF
# ip -all -b - <<-'EOF'
vrf exec vrf0 true
netns exec setsid -f sleep 1h
EOF
# ip vrf pids vrf0
314 sleep
# ps 314
PID TTY STAT TIME COMMAND
314 ? Ss 0:00 sleep 1h
Refactor cmd_exec() and pass to it a function pointer which is called in
the child before the final exec. In the netns exec case the function just
resets the VRF and switches netns.
Doing it in the child is less error prone and safer, because the parent
environment is always kept unaltered.
After this refactor some utility functions became unused, so remove them.
Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Hangbin Liu [Wed, 12 Jun 2019 09:21:15 +0000 (17:21 +0800)]
ip: add a new parameter -Numeric
Add a new parameter '-Numeric' to show the number of protocol, scope,
dsfield, etc directly instead of converting it to human readable name.
Do the same on tc and ss.
This patch is based on David Ahern's previous patch.
Suggested-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David Ahern <dsahern@gmail.com>
David Ahern [Fri, 14 Jun 2019 13:50:55 +0000 (06:50 -0700)]
tools: Fix include path for generate_nlmsg
Compile of tools directory fails with:
make -C tools
CC generate_nlmsg
../../lib/libnetlink.c:28:27: fatal error: linux/nexthop.h: No such file or directory
#include <linux/nexthop.h>
^
compilation terminated.
Add local uapi to build path.
Fixes: 74829ca7dd60 ("libnetlink: Add helper to create nexthop dump request") Signed-off-by: David Ahern <dsahern@gmail.com>
Moshe Shemesh [Tue, 11 Jun 2019 16:11:09 +0000 (19:11 +0300)]
devlink: mnlg: Catch returned error value of dumpit commands
Devlink commands which implements the dumpit callback may return error.
The netlink function netlink_dump() sends the errno value as the payload
of the message, while answering user space with NLMSG_DONE.
To enable receiving errno value for dumpit commands we have to check for
it in the message. If it is a negative value then the dump returned an
error so we should set errno accordingly and check for ext_ack in case
it was set.
Fixes: 049c58539f5d ("devlink: mnlg: Add support for extended ack") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
David Ahern [Tue, 11 Jun 2019 17:32:07 +0000 (10:32 -0700)]
Merge branch 'nexthop-objects' into next
David Ahern says:
====================
This set adds support for nexthop objects to the ip command. The syntax
for nexthop objects is identical to the current 'ip route .. nexthop ...'
syntax making it easy to convert existing use cases.
v2
- Fixed header use in rtnl_nexthopdump_req as noted by roopa
- made rth_del static per Stephen's request and fixed coding style
- removed print_nh_gateway and exported print_rta_gateway to reuse
the iproute.c code (keeps consistency in output)
- added examples to commit message
- fixed monitor use when specific groups requested
- fixed usage in 'ip nexthop'
- added manpage
David Ahern [Fri, 7 Jun 2019 22:38:16 +0000 (15:38 -0700)]
ipmonitor: Add nexthop option to monitor
Add capability to ip-monitor to listen and dump nexthop messages.
Since the nexthop group = 32 which exceeds the max groups bit
field, 2 separate flags are needed - one that defaults on to indicate
nexthop group is joined by default and a second that indicates a
specific selection by the user (e.g, ip mon nexthop route).
Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org>
David Ahern [Fri, 7 Jun 2019 22:38:15 +0000 (15:38 -0700)]
ip route: Add option to use nexthop objects
Add nhid option for routes to use nexthop objects by id.
Example:
$ ip nexthop add id 1 via 10.99.1.2 dev veth1
$ ip route add 10.100.1.0/24 nhid 1
$ ip route ls
...
10.100.1.0/24 nhid 1 via 10.99.1.2 dev veth1
David Ahern [Fri, 7 Jun 2019 22:38:13 +0000 (15:38 -0700)]
Add support for nexthop objects
Add nexthop subcommand to ip. Implement basic commands for creating,
deleting and dumping nexthop objects. Syntax follows 'nexthop' syntax
from existing 'ip route' command.
Examples:
1. Single path
$ ip nexthop add id 1 via 10.99.1.2 dev veth1
$ ip nexthop ls
id 1 via 10.99.1.2 src 10.99.1.1 dev veth1 scope link
2. ECMP
$ ip nexthop add id 2 via 10.99.3.2 dev veth3
$ ip nexthop add id 1001 group 1/2
--> creates a nexthop group with 2 component nexthops:
id 1 and id 2 both the same weight
$ ip nexthop ls
id 1 via 10.99.1.2 src 10.99.1.1 dev veth1 scope link
id 2 via 10.99.3.2 src 10.99.3.1 dev veth3 scope link
id 1001 group 1/2
3. Weighted multipath
$ ip nexthop add id 1002 group 1,10/2,20
--> creates a nexthop group with 2 component nexthops:
id 1 with a weight of 10 and id 2 with a weight of 20
$ ip nexthop ls
id 1 via 10.99.1.2 src 10.99.1.1 dev veth1 scope link
id 2 via 10.99.3.2 src 10.99.3.1 dev veth3 scope link
id 1001 group 1/2
id 1002 group 1,10/2,20
David Ahern [Fri, 7 Jun 2019 22:38:08 +0000 (15:38 -0700)]
lwtunnel: Pass encap and encap_type attributes to lwt_parse_encap
lwt_parse_encap currently assumes the encap attribute is RTA_ENCAP
and the type is RTA_ENCAP_TYPE. Change lwt_parse_encap to take these
as input arguments for reuse by nexthop code which has the attributes
as NHA_ENCAP and NHA_ENCAP_TYPE.
Mahesh Bandewar [Thu, 6 Jun 2019 23:44:26 +0000 (16:44 -0700)]
ip6tunnel: fix 'ip -6 {show|change} dev <name>' cmds
Inclusion of 'dev' is allowed by the syntax but not handled
correctly by the command. It produces no output for show
command and falsely successful for change command but does
not make any changes.
can be verified with the following steps
# ip -6 tunnel add ip6tnl1 mode ip6gre local fd::1 remote fd::2 tos inherit ttl 127 encaplimit none
# ip -6 tunnel show ip6tnl1
<correct output>
# ip -6 tunnel show dev ip6tnl1
<no output but correct output after this change>
# ip -6 tunnel change dev ip6tnl1 local 2001:1234::1 remote 2001:1234::2 encaplimit none ttl 127 tos inherit allow-localremote
# echo $?
0
# ip -6 tunnel show ip6tnl1
<no changes applied, but changes are correctly applied after this change>
Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Matteo Croce [Fri, 7 Jun 2019 20:41:22 +0000 (22:41 +0200)]
ip: reset netns after each command in batch mode
When creating a new netns or executing a program into an existing one,
the unshare() or setns() calls will change the current netns.
In batch mode, this can run commands on the wrong interfaces, as the
ifindex value is meaningful only in the current netns. For example, this
command fails because veth-c doesn't exists in the init netns:
# ip -b - <<-'EOF'
netns add client
link add name veth-c type veth peer veth-s netns client
addr add 192.168.2.1/24 dev veth-c
EOF
Cannot find device "veth-c"
Command failed -:7
But if there are two devices with the same name in the init and new netns,
ip will build a wrong ll_map with indexes belonging to the new netns,
and will execute actions in the init netns using this wrong mapping.
This script will flush all eth0 addresses and bring it down, as it has
the same ifindex of veth0 in the new netns:
# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.76/24 brd 192.168.122.255 scope global dynamic eth0
valid_lft 3598sec preferred_lft 3598sec
# ip -b - <<-'EOF'
netns add client
link add name veth0 type veth peer name veth1
link add name veth-ns type veth peer name veth0 netns client
link set veth0 down
address flush veth0
EOF
# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
3: veth1@veth0: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether c2:db:d0:34:13:4a brd ff:ff:ff:ff:ff:ff
4: veth0@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether ca:9d:6b:5f:5f:8f brd ff:ff:ff:ff:ff:ff
5: veth-ns@if2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 32:ef:22:df:51:0a brd ff:ff:ff:ff:ff:ff link-netns client
The same issue can be triggered by the netns exec subcommand with a
sligthy different script:
# ip netns add client
# ip -b - <<-'EOF'
netns exec client true
link add name veth0 type veth peer name veth1
link add name veth-ns type veth peer name veth0 netns client
link set veth0 down
address flush veth0
EOF
Fix this by adding two netns_{save,reset} functions, which are used
to get a file descriptor for the init netns, and restore it after
each batch command.
netns_save() is called before the unshare() or setns(),
while netns_restore() is called after each command.
Fixes: 0dc34c7713bb ("iproute2: Add processless network namespace support") Reviewed-and-tested-by: Andrea Claudi <aclaudi@redhat.com> Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
ctinfo is a tc action restoring data stored in conntrack marks to
various fields. At present it has two independent modes of operation,
restoration of DSCP into IPv4/v6 diffserv and restoration of conntrack
marks into packet skb marks.
It understands a number of parameters specific to this action in
additional to the usual action syntax. Each operating mode is
independent of the other so all options are optional, however not
specifying at least one mode is a bit pointless.
dscp enables copying of a DSCP stored in the conntrack mark into the
ipv4/v6 diffserv field. The mask is a 32bit field and specifies where
in the conntrack mark the DSCP value is located. It must be 6
contiguous bits long. eg. 0xfc000000 would restore the DSCP from the
upper 6 bits of the conntrack mark.
The DSCP copying may be optionally controlled by a statemask. The
statemask is a 32bit field, usually with a single bit set and must not
overlap the dscp mask. The DSCP restore operation will only take place
if the corresponding bit/s in conntrack mark ANDed with the statemask
yield a non zero result.
eg. dscp 0xfc000000 0x01000000 would retrieve the DSCP from the top 6
bits, whilst using bit 25 as a flag to do so. Bit 26 is unused in this
example.
CPMARK mode
cpmark enables copying of the conntrack mark to the packet skb mark. In
this mode it is completely equivalent to the existing act_connmark
action. Additional functionality is provided by the optional mask
parameter, whereby the stored conntrack mark is logically ANDed with the
cpmark mask before being stored into skb mark. This allows shared usage
of the conntrack mark between applications.
eg. cpmark 0x00ffffff would restore only the lower 24 bits of the
conntrack mark, thus may be useful in the event that the upper 8 bits
are used by the DSCP function.
Usage: ... ctinfo [dscp mask [statemask]] [cpmark [mask]] [zone ZONE]
[CONTROL] [index <INDEX>]
where :
dscp MASK is the bitmask to restore DSCP
STATEMASK is the bitmask to determine conditional restoring
cpmark MASK mask applied to restored packet mark
ZONE is the conntrack zone
CONTROL := reclassify | pipe | drop | continue | ok |
goto chain <CHAIN_INDEX>
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David Ahern <dsahern@gmail.com>
Davide Caratti [Tue, 4 Jun 2019 22:30:16 +0000 (00:30 +0200)]
tc: simple: don't hardcode the control action
the following TDC test case:
b776 - Replace simple action with invalid goto chain control
checks if the kernel correctly validates the 'goto chain' control action,
when it is specified in 'act_simple' rules. The test systematically fails
because the control action is hardcoded in parse_simple(), i.e. it is not
parsed by command line arguments, so its value is constantly TC_ACT_PIPE.
Because of that, the following command:
# tc action add action simple sdata "test" drop index 7
installs an 'act_simple' rule that never drops packets, and whose 'index'
is the first IDR available, plus an 'act_gact' rule with 'index' equal to
7, that drops packets.
Use parse_action_control_dflt(), like we did on many other TC actions, to
make the control action configurable also with 'act_simple'. The expected
results of test b776 are summarized below:
Roman Mashak [Thu, 6 Jun 2019 21:32:09 +0000 (17:32 -0400)]
tc: Fix binding of gact action by index.
The following operation fails:
% sudo tc actions add action pipe index 1
% sudo tc filter add dev lo parent ffff: \
protocol ip pref 10 u32 match ip src 127.0.0.2 \
flowid 1:10 action gact index 1
Bad action type index
Usage: ... gact <ACTION> [RAND] [INDEX]
Where: ACTION := reclassify | drop | continue | pass | pipe |
goto chain <CHAIN_INDEX> | jump <JUMP_COUNT>
RAND := random <RANDTYPE> <ACTION> <VAL>
RANDTYPE := netrand | determ
VAL : = value not exceeding 10000
JUMP_COUNT := Absolute jump from start of action list
INDEX := index value used
However, passing a control action of gact rule during filter binding works:
% sudo tc filter add dev lo parent ffff: \
protocol ip pref 10 u32 match ip src 127.0.0.2 \
flowid 1:10 action gact pipe index 1
Binding by reference, i.e. by index, has to consistently work with
any tc action.
Since tc is sensitive to the order of keywords passed on the command line,
we can teach gact to skip parsing arguments as soon as it sees 'gact'
followed by 'index' keyword.
Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Parav Pandit [Thu, 6 Jun 2019 11:49:19 +0000 (06:49 -0500)]
devlink: Increase bus, device buffer size to 64 bytes
Device name on mdev bus is 36 characters long which follow standard uuid
RFC 4122.
This is probably the longest name that a kernel will return for a
device.
David Ahern [Fri, 31 May 2019 22:10:55 +0000 (15:10 -0700)]
Merge branch 'rdma-net-namespace' into next
Parav Pandit says:
====================
RDMA subsystem can be running in either of the modes.
(a) Sharing RDMA devices among multiple net namespaces or
(b) Exclusive mode where RDMA device is bound to single net namespace
This patch series adds
(1) query command to query rdma subsystem sharing mode
(2) set command to change rdma subsystem sharing mode
(3) assign rdma device to a net namespace
rdma tool examples:
(a) Query current rdma subsys net namespace sharing mode
$ rdma sys show
netns shared
(b) Change rdma subsys mode to exclusive mode
$ rdma sys set netns exclusive
$ rdma sys show
netns exclusive
(c) Assign rdma device to a specific newly created net namespace
$ ip netns add foo
$ rdma dev set mlx5_1 netns foo
Parav Pandit [Fri, 31 May 2019 03:11:16 +0000 (22:11 -0500)]
rdma: Add an option to set net namespace of rdma device
Enrich rdmatool with an option to set network namespace of RDMA
device. After successful execution of it, rdma device will
be accessible only in assigned network namespace.
rdma tool command examples and output.
First set netns mode to exclusive.
$ rdma system set netns exclusive
Now create network namespace and assign RDMA device to this
network namespace.
$ ip netns add foo
$ rdma dev set mlx5_1 netns foo
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: David Ahern <dsahern@gmail.com>
Parav Pandit [Fri, 31 May 2019 03:11:14 +0000 (22:11 -0500)]
rdma: Add an option to query,set net namespace sharing sys parameter
Enrich rdmatool with an option to query rdma subsystem parameter
whether rdma devices are shared among multiple network namespaces
or exclusive to single network namespace.
rdma tool command examples and output.
$ rdma system show
netns shared
$ rdma system set netns exclusive
$ rdma system show
netns exclusive
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: David Ahern <dsahern@gmail.com>
Nicolas Dichtel [Wed, 29 May 2019 14:42:10 +0000 (16:42 +0200)]
iplink: don't try to get ll addr len when creating an iface
It will obviously fail. This is a follow up of the
commit 757837230a65 ("lib: suppress error msg when filling the cache").
Suggested-by: David Ahern <dsahern@gmail.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
While I fixed the mdb json output, I did overlook the text output.
This patch returns the original text output format:
dev <bridge> port <port> grp <mcast group> <temp|permanent> <flags> <timer>
Example (old format, restored by this patch):
dev br0 port eth8 grp 239.1.1.11 temp
Example (changed format after the commit below):
23: br0 eth8 239.1.1.11 temp
We had some reports of failing scripts which were parsing the output.
Also the old format matches the bridge mdb command syntax which makes
it easier to build commands out of the output.
Fixes: c7c1a1ef51ae ("bridge: colorize output and use JSON print library") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Lukasz Czapnik [Mon, 27 May 2019 21:03:49 +0000 (23:03 +0200)]
tc: flower: fix port value truncation
sscanf truncates read port values silently without any error. As sscanf
man says:
(...) sscanf() conform to C89 and C99 and POSIX.1-2001. These standards
do not specify the ERANGE error.
Replace sscanf with safer get_be16 that returns error when value is out
of range.
Example:
tc filter add dev eth0 protocol ip parent ffff: prio 1 flower ip_proto
tcp dst_port 70000 hw_tc 1
Would result in filter for port 4464 without any warning.
Fixes: 8930840e678b ("tc: flower: Classify packets based port ranges") Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Nicolas Dichtel [Fri, 24 May 2019 08:59:10 +0000 (10:59 +0200)]
lib: suppress error msg when filling the cache
Before the patch:
$ ip netns add foo
$ ip link add name veth1 address 2a:a5:5c:b9:52:89 type veth peer name veth2 address 2a:a5:5c:b9:53:90 netns foo
RTNETLINK answers: No such device
RTNETLINK answers: No such device
But the command was successful. This may break script. Let's remove those
error messages.
Fixes: 55870dfe7f8b ("Improve batch and dump times by caching link lookups") Reported-by: Philippe Guibert <philippe.guibert@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Paolo Abeni [Mon, 20 May 2019 09:56:52 +0000 (11:56 +0200)]
m_mirred: don't bail if the control action is missing
The mirred act admits an optional control action, defaulting
to TC_ACT_PIPE. The parsing code currently emits an error message
if the control action is not provided on the command line, even
if the command itself completes with no error.
This change shuts down the error message, using the appropriate
parsing helper.
Fixes: e67aba559581 ("tc: actions: add helpers to parse and print control actions") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Matteo Croce [Fri, 17 May 2019 13:38:28 +0000 (15:38 +0200)]
treewide: refactor help messages
Every tool in the iproute2 package have one or more function to show
an help message to the user. Some of these functions print the help
line by line with a series of printf call, e.g. ip/xfrm_state.c does
60 fprintf calls.
If we group all the calls to a single one and just concatenate strings,
we save a lot of libc calls and thus object size. The size difference
of the compiled binaries calculated with bloat-o-meter is:
Phil Sutter [Mon, 6 May 2019 17:09:56 +0000 (19:09 +0200)]
ip-xfrm: Respect family in deleteall and list commands
Allow to limit 'ip xfrm {state|policy} list' output to a certain address
family and to delete all states/policies by family.
Although preferred_family was already set in filters, the filter
function ignored it. To enable filtering despite the lack of other
selectors, filter.use has to be set if family is not AF_UNSPEC.
Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Zhiqiang Liu [Sun, 5 May 2019 01:59:51 +0000 (09:59 +0800)]
ipnetns: use-after-free problem in get_netnsid_from_name func
Follow the following steps:
# ip netns add net1
# export MALLOC_MMAP_THRESHOLD_=0
# ip netns list
then Segmentation fault (core dumped) will occur.
In get_netnsid_from_name func, answer is freed before
rta_getattr_u32(tb[NETNSA_NSID]), where tb[] refers to answer`s
content. If we set MALLOC_MMAP_THRESHOLD_=0, mmap will be adoped to
malloc memory, which will be freed immediately after calling free
func. So reading tb[NETNSA_NSID] will access the released memory
after free(answer).
Here, we will call get_netnsid_from_name(tb[NETNSA_NSID]) before free(answer).
Fixes: 86bf43c7c2f ("lib/libnetlink: update rtnl_talk to support malloc buff at run time") Reported-by: Huiying Kou <kouhuiying@huawei.com> Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com> Acked-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
taprio: Add support for cycle_time and cycle_time_extension
This allows a cycle-time and a cycle-time-extension to be specified.
Specifying a cycle-time will truncate that cycle, so when that instant
is reached, the cycle will start from its beginning.
A cycle-time-extension may cause the last entry of a cycle, just
before the start of a new schedule (the base-time of the "admin"
schedule) to be extended by at maximum "cycle-time-extension"
nanoseconds. The idea of this feauture, as described by the IEEE
802.1Q, is too avoid too narrow gate states.
Example:
tc qdisc change dev IFACE parent root handle 100 taprio \
sched-entry S 0x1 1000000 \
sched-entry S 0x0 2000000 \
sched-entry S 0x1 3000000 \
sched-entry S 0x0 4000000 \
cycle-time-extension 100000 \
cycle-time 9000000 \
base-time 12345678900000000
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David Ahern <dsahern@gmail.com>
This allows for a new schedule to be specified during runtime, without
removing the current one.
For that, the semantics of the 'tc qdisc change' operation in the
context of taprio is that if "change" is called and there is a running
schedule, a new schedule is created and the base-time (let's call it
X) of this new schedule is used so at instant X, it becomes the
"current" schedule. So, in short, "change" doesn't change the current
schedule, it creates a new one and sets it up to it becomes the
current one at some point.
In IEEE 802.1Q terms, it means that we have support for the
"Oper" (current and read-only) and "Admin" (future and mutable)
schedules.
Example of creating the first schedule, then adding a new one:
projects / mirror_iproute2.git / log