The recent rework of PCI/MSI[X] masking moved the non-mask checks from the
low level accessors into the higher level mask/unmask functions.
This missed the fact that these accessors can be invoked from other places
as well. The missing checks break XEN-PV which sets pci_msi_ignore_mask and
also violates the virtual MSIX and the msi_attrib.maskbit protections.
Instead of sprinkling checks all over the place, lift them back into the
low level accessor functions. To avoid checking three different conditions
combine them into one property of msi_desc::msi_attrib.
[ josef: Fixed the missed conversion in the core code ]
Fixes: fcacdfbef5a1 ("PCI/MSI: Provide a new set of mask and unmask functions") Reported-by: Josef Johansson <josef@oderland.se> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Josef Johansson <josef@oderland.se> Cc: Bjorn Helgaas <helgaas@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Errata SKX37 is word-for-word identical to the other errata listed in
this workaround. I happened to notice this after investigating a CMCI
storm on a Skylake host. While I can't confirm this was the root cause,
spurious corrected errors does sound like a likely suspect.
Fixes: 2976908e4198 ("x86/mce: Do not log spurious corrected mce errors") Signed-off-by: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20211029205759.GA7385@codemonkey.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
{standard input}: Assembler messages:
{standard input}:287: Error: opcode not supported on this processor: mips3 (mips3) `dins $10,$7,32,32'
{standard input}:680: Error: opcode not supported on this processor: mips3 (mips3) `dins $10,$7,32,32'
{standard input}:1274: Error: opcode not supported on this processor: mips3 (mips3) `dins $12,$9,32,32'
{standard input}:2175: Error: opcode not supported on this processor: mips3 (mips3) `dins $10,$7,32,32'
make[1]: *** [scripts/Makefile.build:277: mm/highmem.o] Error 1
with code produced from `__cmpxchg64' for MIPS64r2 CPU configurations
using CONFIG_32BIT and CONFIG_PHYS_ADDR_T_64BIT.
This is due to MIPS_ISA_ARCH_LEVEL downgrading the assembly architecture
to `r4000' i.e. MIPS III for MIPS64r2 configurations, while there is a
block of code containing a DINS MIPS64r2 instruction conditionalized on
MIPS_ISA_REV >= 2 within the scope of the downgrade.
The assembly architecture override code pattern has been put there for
LL/SC instructions, so that code compiles for configurations that select
a processor to build for that does not support these instructions while
still providing run-time support for processors that do, dynamically
switched by non-constant `cpu_has_llsc'. It went in with linux-mips.org
commit aac8aa7717a2 ("Enable a suitable ISA for the assembler around
ll/sc so that code builds even for processors that don't support the
instructions. Plus minor formatting fixes.") back in 2005.
Fix the problem by wrapping these instructions along with the adjacent
SYNC instructions only, following the practice established with commit cfd54de3b0e4 ("MIPS: Avoid move psuedo-instruction whilst using
MIPS_ISA_LEVEL") and commit 378ed6f0e3c5 ("MIPS: Avoid using .set mips0
to restore ISA"). Strictly speaking the SYNC instructions do not have
to be wrapped as they are only used as a Loongson3 erratum workaround,
so they will be enabled in the assembler by default, but do this so as
to keep code consistent with other places.
Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: c7e2d71dda7a ("MIPS: Fix set_pte() for Netlogic XLR using cmpxchg64()") Cc: stable@vger.kernel.org # v5.1+ Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Since commit 805b2e1d427a ("kbuild: include Makefile.compiler only when
compiler is needed"), package builds for the loongson2f platform fail.
$ make ARCH=mips CROSS_COMPILE=mips64-linux- lemote2f_defconfig bindeb-pkg
[ snip ]
sh ./scripts/package/builddeb
arch/mips/loongson2ef//Platform:36: *** only binutils >= 2.20.2 have needed option -mfix-loongson2f-nop. Stop.
cp: cannot stat '': No such file or directory
make[5]: *** [scripts/Makefile.package:87: intdeb-pkg] Error 1
make[4]: *** [Makefile:1558: intdeb-pkg] Error 2
make[3]: *** [debian/rules:13: binary-arch] Error 2
dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2
make[2]: *** [scripts/Makefile.package:83: bindeb-pkg] Error 2
make[1]: *** [Makefile:1558: bindeb-pkg] Error 2
make: *** [Makefile:350: __build_one_by_one] Error 2
The reason is because "make image_name" fails.
$ make ARCH=mips CROSS_COMPILE=mips64-linux- image_name
arch/mips/loongson2ef//Platform:36: *** only binutils >= 2.20.2 have needed option -mfix-loongson2f-nop. Stop.
In general, adding $(error ...) in the parse stage is troublesome,
and it is pointless to check toolchains even if we are not building
anything. Do not include Kbuild.platform in such cases.
Fixes: 805b2e1d427a ("kbuild: include Makefile.compiler only when compiler is needed") Reported-by: Jason Self <jason@bluehome.net> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
platform-y accumulates platform names with a slash appended.
The current $(patsubst ...) ends up with doubling slashes.
GNU Make still include Platform files, but in case of an error,
a clumsy file path is displayed:
arch/mips/loongson2ef//Platform:36: *** only binutils >= 2.20.2 have needed option -mfix-loongson2f-nop. Stop.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Jason Self <jason@bluehome.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
For years, there have been random segmentation faults in userspace on
SMP PA-RISC machines. It occurred to me that this might be a problem in
set_pte_at(). MIPS and some other architectures do cache flushes when
installing PTEs with the present bit set.
Here I have adapted the code in update_mmu_cache() to flush the kernel
mapping when the kernel flush is deferred, or when the kernel mapping
may alias with the user mapping. This simplifies calls to
update_mmu_cache().
I also changed the barrier in set_pte() from a compiler barrier to a
full memory barrier. I know this change is not sufficient to fix the
problem. It might not be needed.
I have had a few days of operation with 5.14.16 to 5.15.1 and haven't
seen any random segmentation faults on rp3440 or c8000 so far.
Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@kernel.org # 5.12+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
I noticed that sometimes at kernel startup the backtraces did not
included the function names of init functions. Their address were not
resolved to function names and instead only the address was printed.
Debugging shows that the culprit is is_ksym_addr() which is called
by the backtrace functions to check if an address belongs to a function in
the kernel. The problem occurs only for CONFIG_KALLSYMS_ALL=y.
When looking at is_ksym_addr() one can see that for CONFIG_KALLSYMS_ALL=y
the function only tries to resolve the address via is_kernel() function,
which checks like this:
if (addr >= _stext && addr <= _end)
return 1;
On parisc the init functions are located before _stext, so this check fails.
Other platforms seem to have all functions (including init functions)
behind _stext.
The following patch moves the _stext symbol at the beginning of the
kernel and thus includes the init section. This fixes the check and does
not seem to have any negative side effects on where the kernel mapping
happens in the map_pages() function in arch/parisc/mm/init.c.
Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@kernel.org # 5.4+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Naresh and Antonio ran into a build failure with latest Debian
armhf compilers, with lots of output like
tmp/ccY3nOAs.s:2215: Error: selected processor does not support `cpsid i' in ARM mode
As it turns out, $(cc-option) fails early here when the FPU is not
selected before CPU architecture is selected, as the compiler
option check runs before enabling -msoft-float, which causes
a problem when testing a target architecture level without an FPU:
cc1: error: '-mfloat-abi=hard': selected architecture lacks an FPU
Passing e.g. -march=armv6k+fp in place of -march=armv6k would avoid this
issue, but the fallback logic is already broken because all supported
compilers (gcc-5 and higher) are much more recent than these options,
and building with -march=armv5t as a fallback no longer works.
The best way forward that I see is to just remove all the checks, which
also has the nice side-effect of slightly improving the startup time for
'make'.
The -mtune=marvell-f option was apparently never supported by any mainline
compiler, and the custom Codesourcery gcc build that did support is
now too old to build kernels, so just use -mtune=xscale unconditionally
for those.
This should be safe to apply on all stable kernels, and will be required
in order to keep building them with gcc-11 and higher.
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=996419 Reported-by: Antonio Terceiro <antonio.terceiro@linaro.org> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Klaus Kudielka <klaus.kudielka@gmail.com> Cc: Matthias Klose <doko@debian.org> Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Currently __set_fixmap() bails out with a warning when called in early boot
from early_iounmap(). Fix it, and while at it, make the comment a bit easier
to understand.
Cc: <stable@vger.kernel.org> Fixes: b089c31c519c ("ARM: 8667/3: Fix memory attribute inconsistencies when using fixmap") Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Linux allows doing a flush/fsync on a file open for read-only,
but the protocol does not allow that. If the file passed in
on the flush is read-only try to find a writeable handle for
the same inode, if that is not possible skip sending the
fsync call to the server to avoid breaking the apps.
Reported-by: Julian Sikorski <belegdol@gmail.com> Tested-by: Julian Sikorski <belegdol@gmail.com> Suggested-by: Jeremy Allison <jra@samba.org> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Commit aeb58c860dc5 ("thermal/drivers/int340x: processor_thermal: Suppot
64 bit RFIM responses") started using 'readq()' to read 64-bit status
responses from the int340x hardware.
That's all fine and good, but on 32-bit targets a 64-bit 'readq()' is
ambiguous, since it's no longer an atomic access. Some hardware might
require 64-bit accesses, and other hardware might want low word first or
high word first.
It's quite likely that the driver isn't relevant in a 32-bit environment
any more, and there's a patch floating around to just make it depend on
X86_64, but let's make it buildable on x86-32 anyway.
The driver previously just read the low 32 bits, so the hardware
certainly is ok with 32-bit reads, and in a little-endian environment
the low word first model is the natural one.
So just add the include for the 'io-64-nonatomic-lo-hi.h' version.
Fixes: aeb58c860dc5 ("thermal/drivers/int340x: processor_thermal: Suppot 64 bit RFIM responses") Reported-by: Jakub Kicinski <kuba@kernel.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The below commit added optional support for passing a bind address.
It configures the sockaddr bind arguments before parsing options and
reconfigures on options -b and -4.
This broke support for passing port (-p) on its own.
Configure sockaddr after parsing all arguments.
Fixes: 3327a9c46352 ("selftests: add functionals test for UDP GRO") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Ensure diagnostics monitoring support is implemented for the SFF 8472
compliant port module and set the correct length for ethtool port
module eeprom read.
Fixes: f56ec6766dcf ("cxgb4: Add support for ethtool i2c dump") Signed-off-by: Manoj Malviya <manojmalviya@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
We got the following WARNING when running ab/nginx
test with RDMA link flapping (up-down-up).
The reason is when smc_sock fallback and at linkdown
happens simultaneously, we may got the following situation:
smc_sock was set to SMC_CLOSED and sock_put() been called
when terminate the link group. But later application call
close() on the socket, then we got:
__smc_release():
if (smc_sock->fallback)
smc_sock->sk_state = SMC_CLOSED
sock_put(smc_sock)
Again we set the smc_sock to CLOSED through it's already
in CLOSED state, and double put the refcnt, so the following
warning happens:
refcount_t: underflow; use-after-free.
WARNING: CPU: 5 PID: 860 at lib/refcount.c:28 refcount_warn_saturate+0x8d/0xf0
Modules linked in:
CPU: 5 PID: 860 Comm: nginx Not tainted 5.10.46+ #403
Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 8c24b4c 04/01/2014
RIP: 0010:refcount_warn_saturate+0x8d/0xf0
Code: 05 5c 1e b5 01 01 e8 52 25 bc ff 0f 0b c3 80 3d 4f 1e b5 01 00 75 ad 48
This patch adds check in __smc_release() to make
sure we won't do an extra sock_put() and set the
socket to CLOSED when its already in CLOSED state.
Fixes: 51f1de79ad8e (net/smc: replace sock_put worker by socket refcounting) Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Currently vosck_connect() increments sock refcount for nonblocking
socket each time it's called, which can lead to memory leak if
it's called multiple times because connect timeout function decrements
sock refcount only once.
Fixes it by making vsock_connect() return -EALREADY immediately when
sock state is already SS_CONNECTING.
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Commit bfe301ebbc94 ("net: mvpp2: convert to use
mac_prepare()/mac_finish()") introduced a bug wherein it leaves the MAC
RESET register asserted after mac_finish(), due to wrong order of
function calls.
Before it was:
.mac_config()
mvpp22_mode_reconfigure()
assert reset
mvpp2_xlg_config()
deassert reset
Now it is:
.mac_prepare()
.mac_config()
mvpp2_xlg_config()
deassert reset
.mac_finish()
mvpp2_xlg_config()
assert reset
Obviously this is wrong.
This bug is triggered when phylink tries to change the PHY interface
mode from a GMAC mode (sgmii, 1000base-x, 2500base-x) to XLG mode
(10gbase-r, xaui). The XLG mode does not work since reset is left
asserted. Only after
ifconfig down && ifconfig up
is called will the XLG mode work.
Move the call to mvpp22_mode_reconfigure() to .mac_prepare()
implementation. Since some of the subsequent functions need to know
whether the interface is being changed, we unfortunately also need to
pass around the new interface mode before setting port->phy_interface.
Fixes: bfe301ebbc94 ("net: mvpp2: convert to use mac_prepare()/mac_finish()") Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
It is spurious to allocate a bitmap without initializing it.
So, better safe than sorry, initialize it to 0 at least to have some known
values.
While at it, switch to the devm_bitmap_ API which is less verbose.
Fixes: 4b41d3436796 ("net: ethernet: ti: cpsw: allow untagged traffic on host port") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Commit fe28c53ed71d ("net: stmmac: fix taprio configuration when
base_time is in the past") allowed some base time values in the past,
but apparently not all, the base-time value of 0 (Jan 1st 1970) is still
explicitly denied by the driver.
Remove the bogus check.
Fixes: b60189e0392f ("net: stmmac: Integrate EST with TAPRIO scheduler API") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Currently, driver only allow configuring ETS bandwidth of TCs according
to the max TC number queried from firmware. However, the hardware actually
supports 8 TCs and users may need to configure ETS bandwidth of all TCs,
so remove the restriction.
Fixes: 330baff5423b ("net: hns3: add ETS TC weight setting in SSU module") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Currently, driver will send command to firmware to query pfc packet number
when user uses dcb tool to get pfc parameters. However, the periodic
service task will also periodically query and record MAC statistics,
including pfc packet number.
As the hardware registers of statistics is cleared after reading, it will
cause pfc packet number of MAC statistics are not correct after using dcb
tool to get pfc parameters.
To fix this problem, when user uses dcb tool to get pfc parameters, driver
updates MAC statistics firstly and then get pfc packet number from MAC
statistics.
Fixes: 64fd2300fcc1 ("net: hns3: add support for querying pfc puase packets statistic") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Currently, NIC init ROCE interrupt vector with MSIX interrupt. But ROCE use
pci_irq_vector() to get interrupt vector, which adds the relative interrupt
vector again and gets wrong interrupt vector.
So fixes it by assign relative interrupt vector to ROCE instead of MSIX
interrupt vector and delete the unused struct member base_msi_vector
declaration of hclgevf_dev.
Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
1) if q->tk_offset == TK_OFFS_MAX, then get_tcp_tstamp() calls
ktime_mono_to_any() with out-of-bound value.
2) if q->tk_offset is changed in taprio_parse_clockid(),
taprio_get_time() might also call ktime_mono_to_any()
with out-of-bound value as sysbot found:
UBSAN: array-index-out-of-bounds in kernel/time/timekeeping.c:908:27
index 3 is out of range for type 'ktime_t *[3]'
CPU: 1 PID: 25668 Comm: kworker/u4:0 Not tainted 5.15.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
ubsan_epilogue+0xb/0x5a lib/ubsan.c:151
__ubsan_handle_out_of_bounds.cold+0x62/0x6c lib/ubsan.c:291
ktime_mono_to_any+0x1d4/0x1e0 kernel/time/timekeeping.c:908
get_tcp_tstamp net/sched/sch_taprio.c:322 [inline]
get_packet_txtime net/sched/sch_taprio.c:353 [inline]
taprio_enqueue_one+0x5b0/0x1460 net/sched/sch_taprio.c:420
taprio_enqueue+0x3b1/0x730 net/sched/sch_taprio.c:485
dev_qdisc_enqueue+0x40/0x300 net/core/dev.c:3785
__dev_xmit_skb net/core/dev.c:3869 [inline]
__dev_queue_xmit+0x1f6e/0x3630 net/core/dev.c:4194
batadv_send_skb_packet+0x4a9/0x5f0 net/batman-adv/send.c:108
batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:393 [inline]
batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:421 [inline]
batadv_iv_send_outstanding_bat_ogm_packet+0x6d7/0x8e0 net/batman-adv/bat_iv_ogm.c:1701
process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298
worker_thread+0x658/0x11f0 kernel/workqueue.c:2445
kthread+0x405/0x4f0 kernel/kthread.c:327
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
Fixes: 7ede7b03484b ("taprio: make clock reference conversions easier") Fixes: 54002066100b ("taprio: Adjust timestamps for TCP packets") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vedang Patel <vedang.patel@intel.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20211108180815.1822479-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Model 88E6191X only supports >1G speeds on port 10. Port 0 and 9 are
only 1G.
Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: Marek Behún <kabel@kernel.org> Cc: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20211104171747.10509-1-kabel@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
There was a change(below) target for such issue: d82e2c249c8f ("drm/amdgpu: Fix crash on device remove/driver unload")
But the fix for VI ASICs was missing there. This is a supplement for
that.
Fixes: d82e2c249c8f ("drm/amdgpu: Fix crash on device remove/driver unload") Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
DEFINE_PROC_SHOW_ATTRIBUTE() is supposed to be used to define a series
of functions and variables to register proc file easily. And the users
can use proc_create_data() to pass their own private data and get it
via seq->private in the callback. Unfortunately, the proc file system
use PDE_DATA() to get private data instead of inode->i_private. So fix
it. Fortunately, there only one user of it which does not pass any
private data, so this bug does not break any in-tree codes.
Link: https://lkml.kernel.org/r/20211029032638.84884-1-songmuchun@bytedance.com Fixes: 97a32539b956 ("proc: convert everything to "struct proc_ops"") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Florent Revest <revest@chromium.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The prior message is confusing users, which is the exact opposite of the
goal. If the message is being seen, one of the following situations is
happening:
1. the param is misspelled
2. the param is not valid due to the kernel configuration
3. the param is intended for init but isn't after the '--'
delineator on the command line
To make that more clear to the user, explicitly mention "kernel command
line" and also note that the params are still passed to user space to
avoid causing any alarm over params intended for init.
Link: https://lkml.kernel.org/r/20211013223502.96756-1-ahalaney@redhat.com Fixes: 86d1919a4fb0 ("init: print out unknown kernel parameters") Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Suggested-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
For NV12 FBs with odd main surface tile-row height the CCS surface
height was incorrectly calculated 1 less than the actual value. Fix this
by rounding up the result of divison. For consistency do the same for
the CCS surface width calculation.
The priv->ntfy_blocks[] has "priv->num_ntfy_blks" elements so this >
needs to be >= to prevent an off by one bug. The priv->ntfy_blocks[]
array is allocated in gve_alloc_notify_blocks().
Fixes: 87a7f321bb6a ("gve: Recover from queue stall due to missed IRQ") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Using the % operator on a 64-bit variable is expensive and can
cause a link failure:
arm-linux-gnueabi-ld: drivers/dma/stm32-dma.o: in function `stm32_dma_get_max_width':
stm32-dma.c:(.text+0x170): undefined reference to `__aeabi_uldivmod'
arm-linux-gnueabi-ld: drivers/dma/stm32-dma.o: in function `stm32_dma_set_xfer_param':
stm32-dma.c:(.text+0x1cd4): undefined reference to `__aeabi_uldivmod'
As we know that we just want to check the alignment in
stm32_dma_get_max_width(), there is no need for a full division, and
using a simple mask is a faster replacement.
Same in stm32_dma_set_xfer_param(), change this to only allow burst
transfers if the address is a multiple of the length.
stm32_dma_get_best_burst just after will take buf_len into account to fix
burst in case of misalignment.
Theorically, address pointers used by STM32 DMA must be chosen so as to
ensure that all transfers within a burst block are aligned on the address
boundary equal to the size of the transfer.
If this is always the case for peripheral addresses on STM32, it is not for
memory addresses if the user doesn't respect this alignment constraint.
To avoid a weird behavior of the DMA controller in this case (no error
triggered but data are not transferred as expected), force no burst.
But similar to the case in 84f44df664e9 ("bpf: sock_ops sk access may stomp
registers when dst_reg = src_reg"), the code will read an incorrect skb->len
when src == dst. In this case we end up generating this xlated code:
... where line 560 is the reading 4B of (skb->data + 112) instead of the
intended skb->len Here the skb pointer in r1 gets set to skb->data and the
later deref for skb->len ends up following skb->data instead of skb.
This fixes the issue similarly to the patch mentioned above by creating an
additional temporary variable and using to store the register when dst_reg =
src_reg. We name the variable bpf_temp_reg and place it in the cb context for
sk_skb. Then we restore from the temp to ensure nothing is lost.
Fixes: 16137b09a66f2 ("bpf: Compute data_end dynamically with JIT code") Signed-off-by: Jussi Maki <joamaki@gmail.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20211103204736.248403-6-john.fastabend@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Strparser is reusing the qdisc_skb_cb struct to stash the skb message handling
progress, e.g. offset and length of the skb. First this is poorly named and
inherits a struct from qdisc that doesn't reflect the actual usage of cb[] at
this layer.
But, more importantly strparser is using the following to access its metadata.
So we use 12 bytes of ->data[] in struct. However in BPF code running parser
and verdict the user has read capabilities into the data[] array as well. Its
not too problematic, but we should not be exposing internal state to BPF
program. If its really needed then we can use the probe_read() APIs which allow
reading kernel memory. And I don't believe cb[] layer poses any API breakage by
moving this around because programs can't depend on cb[] across layers.
In order to fix another issue with a ctx rewrite we need to stash a temp
variable somewhere. To make this work cleanly this patch builds a cb struct
for sk_skb types called sk_skb_cb struct. Then we can use this consistently
in the strparser, sockmap space. Additionally we can start allowing ->cb[]
write access after this.
Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Jussi Maki <joamaki@gmail.com> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20211103204736.248403-5-john.fastabend@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
A socket in a sockmap may have different combinations of programs attached
depending on configuration. There can be no programs in which case the socket
acts as a sink only. There can be a TX program in this case a BPF program is
attached to sending side, but no RX program is attached. There can be an RX
program only where sends have no BPF program attached, but receives are hooked
with BPF. And finally, both TX and RX programs may be attached. Giving us the
permutations:
None, Tx, Rx, and TxRx
To date most of our use cases have been TX case being used as a fast datapath
to directly copy between local application and a userspace proxy. Or Rx cases
and TxRX applications that are operating an in kernel based proxy. The traffic
in the first case where we hook applications into a userspace application looks
like this:
In this case all traffic from AppA (after 3whs) is copied into the AppB
ingress queue and no traffic is ever on the TCP recieive_queue.
In the second case the application never receives, except in some rare error
cases, traffic on the actual user space socket. Instead the send happens in
the kernel.
AppProxy socket pool
sk0 ------------->{sk1,sk2, skn}
^ |
| |
| v
ingress lb egress
TCP TCP
Here because traffic is never read off the socket with userspace recv() APIs
there is only ever one reader on the sk receive_queue. Namely the BPF programs.
However, we've started to introduce a third configuration where the BPF program
on receive should process the data, but then the normal case is to push the
data into the receive queue of AppB.
This is different from the App{A,B} redirect because traffic is first received
on the sk->receive_queue.
Now for the issue. The tcp_bpf_recvmsg() handler first checks the ingress_msg
queue for any data handled by the BPF rx program and returned with PASS code
so that it was enqueued on the ingress msg queue. Then if no data exists on
that queue it checks the socket receive queue. Unfortunately, this is the same
receive_queue the BPF program is reading data off of. So we get a race. Its
possible for the recvmsg() hook to pull data off the receive_queue before the
BPF hook has a chance to read it. It typically happens when an application is
banging on recv() and getting EAGAINs. Until they manage to race with the RX
BPF program.
To fix this we note that before this patch at attach time when the socket is
loaded into the map we check if it needs a TX program or just the base set of
proto bpf hooks. Then it uses the above general RX hook regardless of if we
have a BPF program attached at rx or not. This patch now extends this check to
handle all cases enumerated above, TX, RX, TXRX, and none. And to fix above
race when an RX program is attached we use a new hook that is nearly identical
to the old one except now we do not let the recv() call skip the RX BPF program.
Now only the BPF program pulls data from sk->receive_queue and recv() only
pulls data from the ingress msgQ post BPF program handling.
With this resolved our AppB from above has been up and running for many hours
without detecting any errors. We do this by correlating counters in RX BPF
events and the AppB to ensure data is never skipping the BPF program. Selftests,
was not able to detect this because we only run them for a short period of time
on well ordered send/recvs so we don't get any of the noise we see in real
application environments.
Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Jussi Maki <joamaki@gmail.com> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20211103204736.248403-4-john.fastabend@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
We do not need to handle unhash from BPF side we can simply wait for the
close to happen. The original concern was a socket could transition from
ESTABLISHED state to a new state while the BPF hook was still attached.
But, we convinced ourself this is no longer possible and we also improved
BPF sockmap to handle listen sockets so this is no longer a problem.
More importantly though there are cases where unhash is called when data is
in the receive queue. The BPF unhash logic will flush this data which is
wrong. To be correct it should keep the data in the receive queue and allow
a receiving application to continue reading the data. This may happen when
tcp_abort() is received for example. Instead of complicating the logic in
unhash simply moving all this to tcp_close() hook solves this.
Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Jussi Maki <joamaki@gmail.com> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20211103204736.248403-3-john.fastabend@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
gcc warns about undefined behavior the vmalloc code when building
with CONFIG_ARM64_PA_BITS_52, when the 'idx++' in the argument to
__phys_to_pte_val() is evaluated twice:
mm/vmalloc.c: In function 'vmap_pfn_apply':
mm/vmalloc.c:2800:58: error: operation on 'data->idx' may be undefined [-Werror=sequence-point]
2800 | *pte = pte_mkspecial(pfn_pte(data->pfns[data->idx++], data->prot));
| ~~~~~~~~~^~
arch/arm64/include/asm/pgtable-types.h:25:37: note: in definition of macro '__pte'
25 | #define __pte(x) ((pte_t) { (x) } )
| ^
arch/arm64/include/asm/pgtable.h:80:15: note: in expansion of macro '__phys_to_pte_val'
80 | __pte(__phys_to_pte_val((phys_addr_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
| ^~~~~~~~~~~~~~~~~
mm/vmalloc.c:2800:30: note: in expansion of macro 'pfn_pte'
2800 | *pte = pte_mkspecial(pfn_pte(data->pfns[data->idx++], data->prot));
| ^~~~~~~
I have no idea why this never showed up earlier, but the safest
workaround appears to be changing those macros into inline functions
so the arguments get evaluated only once.
Cc: Matthew Wilcox <willy@infradead.org> Fixes: 75387b92635e ("arm64: handle 52-bit physical addresses in page table entries") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211105075414.2553155-1-arnd@kernel.org Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The id argument of ARM64_FTR_REG_OVERRIDE() is used for two purposes:
one as the system register encoding (used for the sys_id field of
__ftr_reg_entry), and the other as the register name (stringified
and used for the name field of arm64_ftr_reg), which is debug
information. The id argument is supposed to be a macro that
indicates an encoding of the register (eg. SYS_ID_AA64PFR0_EL1, etc).
ARM64_FTR_REG(), which also has the same id argument,
uses ARM64_FTR_REG_OVERRIDE() and passes the id to the macro.
Since the id argument is completely macro-expanded before it is
substituted into a macro body of ARM64_FTR_REG_OVERRIDE(),
the stringified id in the body of ARM64_FTR_REG_OVERRIDE is not
a human-readable register name, but a string of numeric bitwise
operations.
Fix this so that human-readable register names are available as
debug information.
Fixes: 8f266a5d878a ("arm64: cpufeature: Add global feature override facility") Signed-off-by: Reiji Watanabe <reijiw@google.com> Reviewed-by: Oliver Upton <oupton@google.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211101045421.2215822-1-reijiw@google.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
'netdev' is a managed resource allocated in the probe using
'devm_alloc_etherdev()'.
It must not be freed explicitly in the remove function.
Fixes: ee7da21ac4c3 ("net: Add driver for LiteX's LiteETH network interface") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
skb is already freed by dev_kfree_skb in pn533_fill_fragment_skbs,
but follow error handler branch when pn533_fill_fragment_skbs()
fails, skb is freed again, results in double free issue. Fix this
by not free skb in error path of pn533_fill_fragment_skbs.
Fixes: 963a82e07d4e ("NFC: pn533: Split large Tx frames in chunks") Fixes: 93ad42020c2d ("NFC: pn533: Target mode Tx fragmentation support") Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Both ifindex and LLC_SK_DEV_HASH_ENTRIES are signed.
This means that (ifindex % LLC_SK_DEV_HASH_ENTRIES) is negative
if @ifindex is negative.
We could simply make LLC_SK_DEV_HASH_ENTRIES unsigned.
In this patch I chose to use hash_32() to get more entropy
from @ifindex, like llc_sk_laddr_hashfn().
UBSAN: array-index-out-of-bounds in ./include/net/llc.h:75:26
index -43 is out of range for type 'hlist_head [64]'
CPU: 1 PID: 20999 Comm: syz-executor.3 Not tainted 5.15.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
ubsan_epilogue+0xb/0x5a lib/ubsan.c:151
__ubsan_handle_out_of_bounds.cold+0x62/0x6c lib/ubsan.c:291
llc_sk_dev_hash include/net/llc.h:75 [inline]
llc_sap_add_socket+0x49c/0x520 net/llc/llc_conn.c:697
llc_ui_bind+0x680/0xd70 net/llc/af_llc.c:404
__sys_bind+0x1e9/0x250 net/socket.c:1693
__do_sys_bind net/socket.c:1704 [inline]
__se_sys_bind net/socket.c:1702 [inline]
__x64_sys_bind+0x6f/0xb0 net/socket.c:1702
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fa503407ae9
Fixes: 6d2e3ea28446 ("llc: use a device based hash table to speed up multicast delivery") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
If btf__new() is called then there needs to be a corresponding btf__free().
Fixes: f8dfeae009effc0b ("perf bpf: Show more BPF program info in print_bpf_prog_info()") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20211106053733.3580931-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
snprintf() returns the number of bytes it would have printed if there
were space. But it does not count the NUL terminator. So that means
that if "count == copied" then this has already overflowed by one
character.
This bug likely isn't super harmful in real life.
Link: https://lkml.kernel.org/r/20210916130404.GA25094@kili Fixes: c0265342bff4 ("zram: introduce zram memory tracking") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
There is one possible race window between zs_pool_dec_isolated() and
zs_unregister_migration() because wait_for_isolated_drain() checks the
isolated count without holding class->lock and there is no order inside
zs_pool_dec_isolated(). Thus the below race window could be possible:
In es58x_rx_err_msg(), if can->do_set_mode() fails, the function
directly returns without calling netif_rx(skb). This means that the
skb previously allocated by alloc_can_err_skb() is not freed. In other
terms, this is a memory leak.
This patch simply removes the return statement in the error branch and
let the function continue.
Issue was found with GCC -fanalyzer, please follow the link below for
details.
Fixes: 8537257874e9 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces") Link: https://lore.kernel.org/all/20211026180740.1953265-1-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Cc: Lang Yu <lang.yu@amd.com> Cc: Darren Powell <darren.powell@amd.com> Fixes: 6db0c87a0a8e ("amdgpu/pm: Replace hwmgr smu usage of sprintf with sysfs_emit")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1774 Reviewed-by: Lang Yu <lang.yu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
My previous patch correctly addressed the possible link failure, but as
Jani points out, the dependency is now stricter than it needs to be.
Change it again, to allow DRM_FBDEV_EMULATION to be used when
DRM_KMS_HELPER and FB are both loadable modules and DRM is linked into
the kernel.
As a side-effect, the option is now only visible when at least one DRM
driver makes use of DRM_KMS_HELPER. This is better, because the option
has no effect otherwise.
Fixes: 606b102876e3 ("drm: fb_helper: fix CONFIG_FB dependency") Suggested-by: Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20211029120307.1407047-1-arnd@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
As I want to test both DEVMAP and DEVMAP_HASH in XDP multicast redirect, I
limited DEVMAP max entries to a small value for performace. When the test
runs after amount of interface creating/deleting tests. The interface index
will exceed the map max entries and xdp_redirect_multi will error out with
"Get interfacesInterface index to large".
Fix this issue by limit the tests in netns and specify the ifindex when
creating interfaces.
Fixes: d23292476297 ("selftests/bpf: Add xdp_redirect_multi test") Reported-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211027033553.962413-5-liuhangbin@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The arp request number triggered by ping none exist address is not accurate,
which may lead the test false negative/positive. Change to use arping to
accurate the arp number. Also do not use grep pattern match for dot.
Fixes: d23292476297 ("selftests/bpf: Add xdp_redirect_multi test") Suggested-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211027033553.962413-3-liuhangbin@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Fix a device wakeup power reference counting error introduced by
commit a2d7b2e004af ("ACPI: PM: Fix sharing of wakeup power
resources") because of a coding mistake.
Fixes: a2d7b2e004af ("ACPI: PM: Fix sharing of wakeup power resources") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The resource_size defines that:
res->end - res->start + 1;
The origin original code is:
sysmgr_config.max_register = res->end - res->start - 3;
So, the correct fix is that:
sysmgr_config.max_register = resource_size(res) - 4;
Fixes: d12edf9661a4 ("mfd: altera-sysmgr: Use resource_size function on resource object") Signed-off-by: Kai Song <songkai01@inspur.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211006141926.6120-1-songkai01@inspur.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding a SPI device ID table.
Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210924143347.14721-4-broonie@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding a SPI device ID table.
Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210924143347.14721-3-broonie@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Early exits from for_each_child_of_node() should decrement the
node reference counter. Reported by Coccinelle:
drivers/mfd/mfd-core.c:197:2-24: WARNING:
Function "for_each_child_of_node" should have of_node_put() before goto around lines 209.
Fixes: c94bb233a9fe ("mfd: Make MFD core code Device Tree and IRQ domain aware") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210528115126.18370-1-krzysztof.kozlowski@canonical.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Although we've covered all calls with NULL dma buffer pointer, so far,
there may be still some else in the wild. For catching such a case
more easily, add a WARN_ON_ONCE() in snd_dma_get_ops().
The octeontx2 pf nic driver failsz to link when the devlink support
is not reachable:
aarch64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o: in function `otx2_dl_mcam_count_get':
otx2_devlink.c:(.text+0x10): undefined reference to `devlink_priv'
aarch64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o: in function `otx2_dl_mcam_count_validate':
otx2_devlink.c:(.text+0x50): undefined reference to `devlink_priv'
aarch64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o: in function `otx2_dl_mcam_count_set':
otx2_devlink.c:(.text+0xd0): undefined reference to `devlink_priv'
aarch64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o: in function `otx2_devlink_info_get':
otx2_devlink.c:(.text+0x150): undefined reference to `devlink_priv'
This is already selected by the admin function driver, but not the
actual nic, which might be built-in when the af driver is not.
Fixes: 2da489432747 ("octeontx2-pf: devlink params support to set mcam entry count") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When I do fuzz test for bonding device interface, I got the following
use-after-free Calltrace:
==================================================================
BUG: KASAN: use-after-free in bond_enslave+0x1521/0x24f0
Read of size 8 at addr ffff88825bc11c00 by task ifenslave/7365
Last potentially related work creation:
kasan_save_stack+0x23/0x50
kasan_record_aux_stack+0xb7/0xd0
insert_work+0x43/0x190
__queue_work+0x2e3/0x970
delayed_work_timer_fn+0x3e/0x50
call_timer_fn+0x148/0x470
run_timer_softirq+0x8a8/0xc50
__do_softirq+0x107/0x55f
Second to last potentially related work creation:
kasan_save_stack+0x23/0x50
kasan_record_aux_stack+0xb7/0xd0
insert_work+0x43/0x190
__queue_work+0x2e3/0x970
__queue_delayed_work+0x130/0x180
queue_delayed_work_on+0xa7/0xb0
bond_enslave+0xe25/0x24f0
bond_do_ioctl+0x3e0/0x450
dev_ifsioc+0x2ba/0x970
dev_ioctl+0x112/0x710
sock_do_ioctl+0x118/0x1b0
sock_ioctl+0x2e0/0x490
__x64_sys_ioctl+0x118/0x150
do_syscall_64+0x35/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Memory state around the buggy address: ffff88825bc11b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88825bc11b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88825bc11c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^ ffff88825bc11c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88825bc11d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Put new_slave in bond_sysfs_slave_add() will cause use-after-free problems
when new_slave is accessed in the subsequent error handling process. Since
new_slave will be put in the subsequent error handling process, remove the
unnecessary put to fix it.
In addition, when sysfs_create_file() fails, if some files have been crea-
ted successfully, we need to call sysfs_remove_file() to remove them.
Since there are sysfs_create_files() & sysfs_remove_files() can be used,
use these two functions instead.
Fixes: 7afcaec49696 (bonding: use kobject_put instead of _del after kobject_add) Signed-off-by: Huang Guobin <huangguobin4@huawei.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The huge page functionality in TTM does not work safely because PUD and
PMD entries do not have a special bit.
get_user_pages_fast() considers any page that passed pmd_huge() as
usable:
if (unlikely(pmd_trans_huge(pmd) || pmd_huge(pmd) ||
pmd_devmap(pmd))) {
And vmf_insert_pfn_pmd_prot() unconditionally sets
entry = pmd_mkhuge(pfn_t_pmd(pfn, prot));
eg on x86 the page will be _PAGE_PRESENT | PAGE_PSE.
As such gup_huge_pmd() will try to deref a struct page:
head = try_grab_compound_head(pmd_page(orig), refs, flags);
and thus crash.
Thomas further notices that the drivers are not expecting the struct page
to be used by anything - in particular the refcount incr above will cause
them to malfunction.
Thus everything about this is not able to fully work correctly considering
GUP_fast. Delete it entirely. It can return someday along with a proper
PMD/PUD_SPECIAL bit in the page table itself to gate GUP_fast.
Fixes: 314b6580adc5 ("drm/ttm, drm/vmwgfx: Support huge TTM pagefaults") Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Thomas Hellström <thomas.helllstrom@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com>
[danvet: Update subject per Thomas' &Christian's review] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/0-v2-a44694790652+4ac-ttm_pmd_jgg@nvidia.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Commit 83cbce957446 ("block: add error handling for device_add_disk /
add_disk") added error handling to device_add_disk(), however the goto
label for the kobject_create_and_add() failure did not set the return
value correctly, and so we can end up in a situation where
kobject_create_and_add() fails but we report success.
Fixes: 83cbce957446 ("block: add error handling for device_add_disk / add_disk") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211103164023.1384821-1-mcgrof@kernel.org
[axboe: fold in followup fix from Wu Bo <wubo40@huawei.com>] Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
As reported by Zhang there's a small issue if in forced mode the duplex
mode changes with the link staying up [0]. In this case the MAC isn't
notified about the change.
The proposed patch relies on the phylib state machine and ignores the
fact that there are drivers that uses phylib but not the phylib state
machine. So let's don't change the behavior for such drivers and fix
it w/o re-adding state PHY_FORCING for the case that phylib state
machine is used.
Commit a365ab6b9dfb ("cpufreq: intel_pstate: Implement the
->adjust_perf() callback") caused intel_pstate to use nonzero HWP
desired values in certain usage scenarios, but it did not prevent
them from being leaked into the confugirations in which HWP desired
is expected to be 0.
The failing scenarios are switching the driver from the passive
mode to the active mode and starting a new kernel via kexec() while
intel_pstate is running in the passive mode.
To address this issue, ensure that HWP desired will be cleared on
offline and suspend/shutdown.
Fixes: a365ab6b9dfb ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback") Reported-by: Julia Lawall <julia.lawall@inria.fr> Tested-by: Julia Lawall <julia.lawall@inria.fr> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Host crashes when pci_enable_atomic_ops_to_root() is called for VFs with
virtual buses. The virtual buses added to SR-IOV have bus->self set to NULL
and host crashes due to this.
Commit bf9c0538e485b591 ("ataflop: use a separate gendisk for each media
format") introduced ataflop_probe_lock mutex, but forgot to unlock the
mutex when atari_floppy_init() (i.e. module loading) succeeded. This will
result in double lock deadlock if ataflop_probe() is called. Also,
unregister_blkdev() must not be called from atari_floppy_init() with
ataflop_probe_lock held when atari_floppy_init() failed, for
ataflop_probe() waits for ataflop_probe_lock with major_names_lock held
(i.e. AB-BA deadlock).
__register_blkdev() needs to be called last in order to avoid calling
ataflop_probe() when atari_floppy_init() is about to fail, for memory for
completing already-started ataflop_probe() safely will be released as soon
as atari_floppy_init() released ataflop_probe_lock mutex.
As with commit 8b52d8be86d72308 ("loop: reorder loop_exit"),
unregister_blkdev() needs to be called first in order to avoid calling
ataflop_alloc_disk() from ataflop_probe() after del_gendisk() from
atari_floppy_exit().
By relocating __register_blkdev() / unregister_blkdev() as explained above,
we can remove ataflop_probe_lock mutex, for probe function and __exit
function are serialized by major_names_lock mutex.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Fixes: bf9c0538e485b591 ("ataflop: use a separate gendisk for each media format") Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Link: https://lore.kernel.org/r/20211103230437.1639990-11-mcgrof@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Instead of using two separate code paths for cleaning up an atari disk,
use one. We take the more careful approach to check for *all* disk
types, as is done on exit. The init path didn't have that check as
the alternative disk types are only probed for later, they are not
initialized by default.
The ataflop assumes del_gendisk() is safe to call, this is only
true because add_disk() does not return a failure, but that will
change soon. And so, before we get to adding error handling for
that case, let's make sure we keep track of which disks actually
get registered. Then we use this to only call del_gendisk for them.
Prior to devm being able to use pmem_release_disk() there are other
failure which can occur for which we must account for and release the
disk for. Address those few cases.
Fixes: 3dd60fb9d95d ("nvdimm/pmem: stop using q_usage_count as external pgmap refcount") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20211103230437.1639990-6-mcgrof@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The reference counting issue happens in one exception handling path of
nouveau_svmm_bind(). When cli->svm.svmm is null, the function forgets
to decrease the refcount of mm increased by get_task_mm(), causing a
refcount leak.
Fix this issue by using mmput() to decrease the refcount in the
exception handling path.
Also, the function forgets to do check against null when get mm
by get_task_mm().
Fix this issue by adding null check after get mm by get_task_mm().
Signed-off-by: Chenyuan Mi <cymi20@fudan.edu.cn> Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Fixes: 822cab6150d3 ("drm/nouveau/svm: check for SVM initialized before migrating") Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210907122633.16665-1-cymi20@fudan.edu.cn Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/14 Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The spec recommends that for transfer length larger than the max-single-cmd
attribute (bMAX_DATA_SIZE_FOR_HPB_SINGLE_CMD) it is possible to couple
pre-requests with the HPB-READ command. Being a recommendation, using
pre-requests can be perceived merely as a means of optimization. A common
practice was to send pre-requests for chunks within some interval, and
leave the READ10 untouched if larger.
Now that the pre-request flows have been removed, all the commands are
single commands. Properly handle this attribute and do not send HPB-READ
for transfer lengths larger than max-single-cmd.
[mkp: resolve conflict]
Fixes: 09d9e4d04187 ("scsi: ufs: ufshpb: Remove HPB2.0 flows") Link: https://lore.kernel.org/r/20211031123654.17719-1-avri.altman@wdc.com Reviewed-by: Daejun Park <daejun7.park@samsung.com> Signed-off-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Calling ufshcd_rpm_{get/put}_sync() prior to ufshcd_scsi_add_wlus() being
called will trigger a NULL pointer dereference. This is because
hba->sdev_ufs_device is initialized in ufshcd_scsi_add_wlus().
ufshpb_get_dev_info() is only called during asynchronous scanning and at
that time pm_runtime_get_sync() has been called:
...
/* Hold auto suspend until async scan completes */
pm_runtime_get_sync(dev);
atomic_set(&hba->scsi_block_reqs_cnt, 0);
...
ufshcd_async_scan()
ufshcd_probe_hba(hba, true);
ufshcd_device_params_init(hba);
ufshpb_get_dev_info();
...
pm_runtime_put_sync(hba->dev);
Remove ufshcd_rpm_{get/put}_sync() from ufshpb_get_dev_info() to fix this
problem.
Link: https://lore.kernel.org/r/20210929200640.828611-2-huobean@gmail.com Fixes: 351b3a849ac7 ("scsi: ufs: ufshpb: Use proper power management API") Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
In ufshpb, pm_runtime_{get,put}_sync() are used to avoid unwanted runtime
suspend during query requests. Whereas commit b294ff3e3449 ("scsi: ufs:
core: Enable power management for wlun") modified the driver core to use
ufshcd_rpm_{get,put}_sync() APIs.
Switch to these APIs in HPB module as well.
Link: https://lore.kernel.org/r/20210902003534epcms2p1937a0f0eeb48a441cb69f5ef13ff8430@epcms2p1 Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Daejun Park <daejun7.park@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
del_gendisk() should not called if the disk has not been added. Fix this.
Fixes: 41cd8b70c37a ("libnvdimm, btt: add support for blk integrity") Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20211103165843.1402142-1-mcgrof@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
If an error occurs after a successful cdns_pcie_init_phy() call, it must be
undone by a cdns_pcie_disable_phy() call, as already done above and below.
Update the goto to branch at the correct place of the error handling path.
Link: https://lore.kernel.org/r/db477b0cb444891a17c4bb424467667dc30d0bab.1624794264.git.christophe.jaillet@wanadoo.fr Fixes: 49e0efdce791 ("PCI: j721e: Add support to provide refclk to PCIe connector") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The handling of PMIC register reads through writing 0 to address 4
of the OpRegion is wrong. Instead of returning the read value
through the value64, which is a no-op for function == ACPI_WRITE calls,
store the value and then on a subsequent function == ACPI_READ with
address == 3 (the address for the value field of the OpRegion)
return the stored value.
This has been tested on a Xiaomi Mi Pad 2 and makes the ACPI battery dev
there mostly functional (unfortunately there are still other issues).
Here are the SET() / GET() functions of the PMIC ACPI device,
which use this OpRegion, which clearly show the new behavior to
be correct:
Method (GET, 3, Serialized)
{
If ((AVBE == One))
{
CLNT = Arg0
SA = Arg1
OFF = Arg2
RWM = Zero
If ((AVBG == One))
{
GPRW = Zero
}
}
Return (VAL) /* \_SB_.PCI0.I2C7.PMI5.VAL_ */
}
Method (SET, 4, Serialized)
{
If ((AVBE == One))
{
CLNT = Arg0
SA = Arg1
OFF = Arg2
VAL = Arg3
RWM = One
If ((AVBG == One))
{
GPRW = One
}
}
}
Fixes: 0afa877a5650 ("ACPI / PMIC: intel: add REGS operation region support") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Currently kdb contains some open-coded routines to generate a summary
character for each task. This code currently issues warnings, is
almost certainly broken and won't make sense to any kernel dev who
has ever used /proc to examine task states.
Fix both the warning and the potential for confusion by adopting the
scheduler's task classification. Whilst doing this we also simplify the
filtering by using mask strings directly (which means we don't have to
guess all the characters the scheduler might give us).
Unfortunately we can't quite match the scheduler classification completely.
We add four extra states: - for idle loops and i, m and s for sleeping
system daemons (which means kthreads in one of the I, M and S states).
These extra states are used to manage the filters for tools to make the
output of ps and bta less noisy.
Note: The Fixes below is the last point the original dubious code was
moved; it was not introduced by that patch. However it gives us
the last point to which this patch can be easily backported.
Happily that should be enough to cover the introduction of
CONFIG_WERROR!
Fixes: 2f064a59a11f ("sched: Change task_struct::state") Link: https://lore.kernel.org/r/20211102173158.3315227-1-daniel.thompson@linaro.org Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When a VF is removed and/or reset its Tx queues need to be
stopped from the PF. This is done by calling the ice_dis_vf_qs()
function, which calls ice_vsi_stop_lan_tx_rings(). Currently
ice_dis_vf_qs() is protected by the VF state bit ICE_VF_STATE_QS_ENA.
Unfortunately, this is causing the Tx queues to not be disabled in some
cases and when the VF tries to re-enable/reconfigure its Tx queues over
virtchnl the op is failing. This is because a VF can be reset and/or
removed before the ICE_VF_STATE_QS_ENA bit is set, but the Tx queues
were already configured via ice_vsi_cfg_single_txq() in the
VIRTCHNL_OP_CONFIG_VSI_QUEUES op. However, the ICE_VF_STATE_QS_ENA bit
is set on a successful VIRTCHNL_OP_ENABLE_QUEUES, which will always
happen after the VIRTCHNL_OP_CONFIG_VSI_QUEUES op.
This was causing the following error message when loading the ice
driver, creating VFs, and modifying VF trust in an endless loop:
[35274.192484] ice 0000:88:00.0: Failed to set LAN Tx queue context, error: ICE_ERR_PARAM
[35274.193074] ice 0000:88:00.0: VF 0 failed opcode 6, retval: -5
[35274.193640] iavf 0000:88:01.0: PF returned error -5 (IAVF_ERR_PARAM) to our request 6
Fix this by always calling ice_dis_vf_qs() and silencing the error
message in ice_vsi_stop_tx_ring() since the calling code ignores the
return anyway. Also, all other places that call ice_vsi_stop_tx_ring()
catch the error, so this doesn't affect those flows since there was no
change to the values the function returns.
Other solutions were considered (i.e. tracking which VF queues had been
"started/configured" in VIRTCHNL_OP_CONFIG_VSI_QUEUES, but it seemed
more complicated than it was worth. This solution also brings in the
chance for other unexpected conditions due to invalid state bit checks.
So, the proposed solution seemed like the best option since there is no
harm in failing to stop Tx queues that were never started.
This issue can be seen using the following commands:
ip link set ens785f1 vf 0 trust on
ip link set ens785f0 vf 0 trust on
done
Fixes: 77ca27c41705 ("ice: add support for virtchnl_queue_select.[tx|rx]_queues bitmap") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
VF was not able to change its hardware MAC address in case
the new address was already present in the MAC filter list.
Change the handling of VF add mac request to not return
if requested MAC address is already present on the list
and check if its hardware MAC needs to be updated in this case.
Fixes: ed4c068d46f6 ("ice: Enable ip link show on the PF to display VF unicast MAC(s)") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Normally it is expected that the dsa_device_ops :: rcv() method finishes
parsing the DSA tag and consumes it, then never looks at it again.
But commit c0bcf537667c ("net: dsa: ocelot: add hardware timestamping
support for Felix") added support for RX timestamping in a very
unconventional way. On this switch, a partial timestamp is available in
the DSA header, but the driver got away with not parsing that timestamp
right away, but instead delayed that parsing for a little longer:
dsa_switch_rcv():
nskb = cpu_dp->rcv(skb, dev); <------------- not here
-> ocelot_rcv()
...
if (dsa_skb_defer_rx_timestamp(p, skb)) <--- but here
-> felix_rxtstamp()
return 0;
When in felix_rxtstamp(), this driver accounted for the fact that
eth_type_trans() happened in the meanwhile, so it got a hold of the
extraction header again by subtracting (ETH_HLEN + OCELOT_TAG_LEN) bytes
from the current skb->data.
This worked for quite some time but was quite fragile from the very
beginning. Not to mention that having DSA tag parsing split in two
different files, under different folders (net/dsa/tag_ocelot.c vs
drivers/net/dsa/ocelot/felix.c) made it quite non-obvious for patches to
come that they might break this.
Finally, the blamed commit does the following: at the end of
ocelot_rcv(), it checks whether the skb payload contains a VLAN header.
If it does, and this port is under a VLAN-aware bridge, that VLAN ID
might not be correct in the sense that the packet might have suffered
VLAN rewriting due to TCAM rules (VCAP IS1). So we consume the VLAN ID
from the skb payload using __skb_vlan_pop(), and take the classified
VLAN ID from the DSA tag, and construct a hwaccel VLAN tag with the
classified VLAN, and the skb payload is VLAN-untagged.
aka it moves the Ethernet header 4 bytes to the right, and pulls 4 bytes
from the skb headroom (effectively also moving skb->data, by definition).
So for felix_rxtstamp()'s fragile logic, all bets are off now.
Instead of having the "extraction" pointer point to the DSA header,
it actually points to 4 bytes _inside_ the extraction header.
Corollary, the last 4 bytes of the "extraction" header are in fact 4
stale bytes of the destination MAC address from the Ethernet header,
from prior to the __skb_vlan_pop() movement.
So of course, RX timestamps are completely bogus when the system is
configured in this way.
The fix is actually very simple: just don't structure the code like that.
For better or worse, the DSA PTP timestamping API does not offer a
straightforward way for drivers to present their RX timestamps, but
other drivers (sja1105) have established a simple mechanism to carry
their RX timestamp from dsa_device_ops :: rcv() all the way to
dsa_switch_ops :: port_rxtstamp() and even later. That mechanism is to
simply save the partial timestamp to the skb->cb, and complete it later.
Question: why don't we simply populate the skb's struct
skb_shared_hwtstamps from ocelot_rcv(), and bother with this
complication of propagating the timestamp to felix_rxtstamp()?
Answer: dsa_switch_ops :: port_rxtstamp() answers the question whether
PTP packets need sleepable context to retrieve the full RX timestamp.
Currently felix_rxtstamp() answers "no, thanks" to that question, and
calls ocelot_ptp_gettime64() from softirq atomic context. This is
understandable, since Felix VSC9959 is a PCIe memory-mapped switch, so
hardware access does not require sleeping. But the felix driver is
preparing for the introduction of other switches where hardware access
is over a slow bus like SPI or MDIO:
https://lore.kernel.org/lkml/20210814025003.2449143-1-colin.foster@in-advantage.com/
So I would like to keep this code structure, so the rework needed when
that driver will need PTP support will be minimal (answer "yes, I need
deferred context for this skb's RX timestamp", then the partial
timestamp will still be found in the skb->cb.
Fixes: ea440cd2d9b2 ("net: dsa: tag_ocelot: use VLAN information from tagging header when available") Reported-by: Po Liu <po.liu@nxp.com> Cc: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The real_dev of a vlan net_device may be freed after
unregister_vlan_dev(). Access the real_dev continually by
vlan_dev_real_dev() will trigger the UAF problem for the
real_dev like following:
Move the put_device(real_dev) to vlan_dev_free(). Ensure
real_dev not be freed before vlan_dev unregistered.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+e4df4e1389e28972e955@syzkaller.appspotmail.com Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Throughout the OpenRISC kernel port VMA is passed as NULL when flushing
kernel tlb entries. Somehow this was missed when I was testing c28b27416da9 ("openrisc: Implement proper SMP tlb flushing") and now the
SMP kernel fails to completely boot.
In OpenRISC VMA is used only to determine which cores need to have their
TLB entries flushed.
This patch updates the logic to flush tlbs on all cores when the VMA is
passed as NULL. Also, we update places VMA is passed as NULL to use
flush_tlb_kernel_range instead. Now, the only place VMA is passed as
NULL is in the implementation of flush_tlb_kernel_range.
Fixes: c28b27416da9 ("openrisc: Implement proper SMP tlb flushing") Reported-by: Jan Henrik Weinstock <jan.weinstock@rwth-aachen.de> Signed-off-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
ETHTOOL_A_PAUSE_STAT_MAX is the MAX attribute id,
so we need to subtract non-stats and add one to
get a count (IOW -2+1 == -1).
Otherwise we'll see:
ethnl cmd 21: calculated reply length 40, but consumed 52
Fixes: 9a27a33027f2 ("ethtool: add standard pause stats") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When generating the selftests to another folder, the toeplitz.sh
and toeplitz_client.sh are missing as they are not in Makefile, e.g.
make -C tools/testing/selftests/ install \
TARGETS="net" INSTALL_PATH=/tmp/kselftests
Making them under TEST_PROGS_EXTENDED as they test NIC hardware features
and are not intended to be run from kselftests.
Fixes: 5ebfb4cc3048 ("selftests/net: toeplitz test") Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When generating the selftests to another folder, the
vrf_strict_mode_test.sh test will miss as it is not in Makefile, e.g.
make -C tools/testing/selftests/ install \
TARGETS="net" INSTALL_PATH=/tmp/kselftests
Fixes: 8735e6eaa438 ("selftests: add selftest for the VRF strict mode") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When generating the selftests to another folder, the SRv6 tests are
missing as they are not in Makefile, e.g.
make -C tools/testing/selftests/ install \
TARGETS="net" INSTALL_PATH=/tmp/kselftests
Fixes: 03a0b567a03d ("selftests: seg6: add selftest for SRv6 End.DT46 Behavior") Fixes: 2195444e09b4 ("selftests: add selftest for the SRv6 End.DT4 behavior") Fixes: 2bc035538e16 ("selftests: add selftest for the SRv6 End.DT6 (VRF) behavior") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When generating the selftests to another folder, the include file
setup_loopback.sh/setup_veth.sh for gro.sh/gre_gro.sh are missing as
they are not in Makefile, e.g.
make -C tools/testing/selftests/ install \
TARGETS="net" INSTALL_PATH=/tmp/kselftests
Fixes: 7d1575014a63 ("selftests/net: GRO coalesce test") Fixes: 9af771d2ec04 ("selftests/net: allow GRO coalesce test on veth") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When generating the selftests to another folder, the icmp.sh test will
miss as it is not in Makefile, e.g.
make -C tools/testing/selftests/ install \
TARGETS="net" INSTALL_PATH=/tmp/kselftests
Fixes: 7e9838b7915e ("selftests/net: Add icmp.sh for testing ICMP dummy address responses") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
This patch allows to use 0 for `coal->rx_coalesce_usecs` param to
disable rx irq coalescing.
Previously we could enable rx irq coalescing via ethtool
(For ex: `ethtool -C eth0 rx-usecs 2000`) but we couldn't disable
it because this part rejects 0 value:
In io-wq.c:io_wq_max_workers(), new_count[] was changed right after each
node's value was set. This caused the following node getting the setting
of the previous one.
Returned values are copied from node 0.
Fixes: 2e480058ddc2 ("io-wq: provide a way to limit max number of workers") Signed-off-by: Beld Zhang <beldzhang@gmail.com>
[axboe: minor fixups] Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
If 'part_shift' is not zero, then 'index << part_shift' might
overflow to a value that is not greater than '0xfffff', then sysfs
might complains about duplicate creation.
Fixes: b0d9111a2d53 ("nbd: use an idr to keep track of nbd devices") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20211102015237.2309763-3-yebin10@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
commit b1a811633f73 ("block: nbd: add sanity check for first_minor")
checks that 'first_minor' should not be greater than 0xff, which is
wrong. Whitout the commit, the details that when user pass 0x100000,
it ends up create sysfs dir "/sys/block/43:0" are as follows:
By the way, with the wrong fix, when part_shift is the default value,
only 8 ndb devices can be created since 8 << 5 is greater than 0xff.
Since the max bits for 'first_minor' should be the same as what
MKDEV() does, which is 20. Change the upper bound of 'first_minor'
from 0xff to 0xfffff.
Fixes: b1a811633f73 ("block: nbd: add sanity check for first_minor") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20211102015237.2309763-2-yebin10@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Return NULL instead of passing to ERR_PTR while err is zero,
this fix smatch warnings:
drivers/xen/xen-pciback/conf_space_capability.c:163
pm_ctrl_init() warn: passing zero to 'ERR_PTR'
Fixes: a92336a1176b ("xen/pciback: Drop two backends, squash and cleanup some code.") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20211008074417.8260-1-yuehaibing@huawei.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The irqchip uses one domain for all GPIO lines, so the line offset
should be determined w.r.t. the first line of the first port, not the
first line of the triggered port.
Fixes: 0d82fb1127fb ("gpio: Add Realtek Otto GPIO support") Signed-off-by: Sander Vanheule <sander@svanheule.net> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
A successful 'clk_prepare()' call should be balanced by a corresponding
'clk_unprepare()' call in the error handling path of the probe, as already
done in the remove function.
More specifically, 'clk_prepare_enable()' is used, but 'clk_disable()' is
also already called. So just the unprepare step has still to be done.
Update the error handling path accordingly.
Fixes: 75d31c2372e4 ("i2c: xlr: add support for Sigma Designs controller variant") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The wq resources needs to be released before the kernel type is reset by
__drv_disable_wq(). With dma channels unregistered and wq quiesced, all the
wq resources for dmaengine can be freed. There is no need to wait until wq
is disabled. With the wq->type being reset to "unknown", the driver is
skipping the freeing of the resources.
Fixes: 0cda4f6986a3 ("dmaengine: idxd: create dmaengine driver for wq 'device'") Reported-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Tested-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/163517405099.3484556.12521975053711345244.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
If we already hold open state on the client, yet the server gives us a
completely different stateid to the one we already hold, then we
currently treat it as if it were an out-of-sequence update, and wait for
5 seconds for other updates to come in.
This commit fixes the behaviour so that we immediately start processing
of the new stateid, and then leave it to the call to
nfs4_test_and_free_stateid() to decide what to do with the old stateid.
Fixes: b4868b44c562 ("NFSv4: Wait for stateid updates after CLOSE/OPEN_DOWNGRADE") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>