There seem to be some problems as result of 30467e0b3be ("mm, hotplug:
fix concurrent memory hot-add deadlock"), which tried to fix a possible
lock inversion reported and discussed in [1] due to the two locks
a) device_lock()
b) mem_hotplug_lock
While add_memory() first takes b), followed by a) during
bus_probe_device(), onlining of memory from user space first took a),
followed by b), exposing a possible deadlock.
In [1], and it was decided to not make use of device_hotplug_lock, but
rather to enforce a locking order.
The problems I spotted related to this:
1. Memory block device attributes: While .state first calls
mem_hotplug_begin() and the calls device_online() - which takes
device_lock() - .online does no longer call mem_hotplug_begin(), so
effectively calls online_pages() without mem_hotplug_lock.
2. device_online() should be called under device_hotplug_lock, however
onlining memory during add_memory() does not take care of that.
In addition, I think there is also something wrong about the locking in
3. arch/powerpc/platforms/powernv/memtrace.c calls offline_pages()
without locks. This was introduced after 30467e0b3be. And skimming over
the code, I assume it could need some more care in regards to locking
(e.g. device_online() called without device_hotplug_lock. This will
be addressed in the following patches.
Now that we hold the device_hotplug_lock when
- adding memory (e.g. via add_memory()/add_memory_resource())
- removing memory (e.g. via remove_memory())
- device_online()/device_offline()
We can move mem_hotplug_lock usage back into
online_pages()/offline_pages().
Why is mem_hotplug_lock still needed? Essentially to make
get_online_mems()/put_online_mems() be very fast (relying on
device_hotplug_lock would be very slow), and to serialize against
addition of memory that does not create memory block devices (hmm).
This patch is partly based on a patch by Vitaly Kuznetsov.
Link: http://lkml.kernel.org/r/20180925091457.28651-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com> Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: Rashmica Gupta <rashmica.g@gmail.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com> Cc: Mathieu Malaterre <malat@debian.org> Cc: John Allen <jallen@linux.vnet.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
For various alignments of buf, the current expression computes
4096 ok
4095 ok
8190
8189
...
4097
i.e., if the caller has already written two bytes into the page buffer,
len is 8190 rather than 4094, because PTR_ALIGN aligns up to the next
boundary. So if the printed version of the bitmap is huge, scnprintf()
ends up writing beyond the page boundary.
I don't think any current callers actually write anything before
bitmap_print_to_pagebuf, but the API seems to be designed to allow it.
[akpm@linux-foundation.org: use offset_in_page(), per Andy]
[akpm@linux-foundation.org: include mm.h for offset_in_page()] Link: http://lkml.kernel.org/r/20180818131623.8755-7-linux@rasmusvillemoes.dk Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Yury Norov <ynorov@caviumnetworks.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
The concern here is that "gup->size" is a u64 and "nr_pages" is unsigned
long. On 32 bit systems we could trick the kernel into allocating fewer
pages than expected.
Link: http://lkml.kernel.org/r/20181025061546.hnhkv33diogf2uis@kili.mountain Fixes: 64c349f4ae78 ("mm: add infrastructure for get_user_pages_fast() benchmarking") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Keith Busch <keith.busch@intel.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Similiar with ipv6 mcast commit 89225d1ce6af3 ("net: ipv6: mld: fix v1/v2
switchback timeout to rfc3810, 9.12.")
i) RFC3376 8.12. Older Version Querier Present Timeout says:
The Older Version Querier Interval is the time-out for transitioning
a host back to IGMPv3 mode once an older version query is heard.
When an older version query is received, hosts set their Older
Version Querier Present Timer to Older Version Querier Interval.
This value MUST be ((the Robustness Variable) times (the Query
Interval in the last Query received)) plus (one Query Response
Interval).
Currently we only use a hardcode value IGMP_V1/v2_ROUTER_PRESENT_TIMEOUT.
Fix it by adding two new items mr_qi(Query Interval) and mr_qri(Query Response
Interval) in struct in_device.
Now we can calculate the switchback time via (mr_qrv * mr_qi) + mr_qri.
We need update these values when receive IGMPv3 queries.
Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Patch series "migrate_misplaced_transhuge_page race conditions".
Aaron found a new instance of the THP MADV_DONTNEED race against
pmdp_clear_flush* variants, that was apparently left unfixed.
While looking into the race found by Aaron, I may have found two more
issues in migrate_misplaced_transhuge_page.
These race conditions would not cause kernel instability, but they'd
corrupt userland data or leave data non zero after MADV_DONTNEED.
I did only minor testing, and I don't expect to be able to reproduce this
(especially the lack of ->invalidate_range before migrate_page_copy,
requires the latest iommu hardware or infiniband to reproduce). The last
patch is noop for x86 and it needs further review from maintainers of
archs that implement flush_cache_range() (not in CC yet).
To avoid confusion, it's not the first patch that introduces the bug fixed
in the second patch, even before removing the
pmdp_huge_clear_flush_notify, that _notify suffix was called after
migrate_page_copy already run.
This patch (of 3):
This is a corollary of ced108037c2aa ("thp: fix MADV_DONTNEED vs. numa
balancing race"), 58ceeb6bec8 ("thp: fix MADV_DONTNEED vs. MADV_FREE
race") and 5b7abeae3af8c ("thp: fix MADV_DONTNEED vs clear soft dirty
race).
When the above three fixes where posted Dave asked
https://lkml.kernel.org/r/929b3844-aec2-0111-fef7-8002f9d4e2b9@intel.com
but apparently this was missed.
The pmdp_clear_flush* in migrate_misplaced_transhuge_page() was introduced
in a54a407fbf7 ("mm: Close races between THP migration and PMD numa
clearing").
The important part of such commit is only the part where the page lock is
not released until the first do_huge_pmd_numa_page() finished disarming
the pagenuma/protnone.
The addition of pmdp_clear_flush() wasn't beneficial to such commit and
there's no commentary about such an addition either.
I guess the pmdp_clear_flush() in such commit was added just in case for
safety, but it ended up introducing the MADV_DONTNEED race condition found
by Aaron.
At that point in time nobody thought of such kind of MADV_DONTNEED race
conditions yet (they were fixed later) so the code may have looked more
robust by adding the pmdp_clear_flush().
This specific race condition won't destabilize the kernel, but it can
confuse userland because after MADV_DONTNEED the memory won't be zeroed
out.
This also optimizes the code and removes a superfluous TLB flush.
[akpm@linux-foundation.org: reflow comment to 80 cols, fix grammar and typo (beacuse)] Link: http://lkml.kernel.org/r/20181013002430.698-2-aarcange@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: Aaron Tomlin <atomlin@redhat.com> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
If the '-w' parameter was provided, the benchmark would exit due to a
mssing 'break'.
Link: http://lkml.kernel.org/r/20181010195605.10689-3-keith.busch@intel.com Signed-off-by: Keith Busch <keith.busch@intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
In ndo_stop, driver resets the netsec ethernet controller IP.
When the netsec IP is reset, HW running mode turns to NRM mode
and driver has to wait until this mode transition completes.
But mode transition to NRM will not complete if the PHY is
in normal operation state. Netsec IP requires PHY is in
power down state when it is reset.
This modification stops the PHY before resetting netsec.
Together with this modification, phy_addr is stored in netsec_priv
structure because ndev->phydev is not yet ready in ndo_init.
Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver") Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Signed-off-by: Yoshitoyo Osaki <osaki.yoshitoyo@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
This patch changes codes as below:
- use f2fs_set_inode_flags() to update i_flags atomically to avoid
potential race.
- synchronize F2FS_I(inode)->i_flags to inode->i_flags in
f2fs_new_inode().
- use f2fs_set_inode_flags() to simply codes in f2fs_quota_{on,off}.
Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
For 32bit, the upper 32-bit of phys_addr_t will be flushed to zero
after AND with PAGE_MASK because the data type of PAGE_MASK is
unsigned long. To fix this problem, the page alignment is done by
subtracting the page offset instead of AND with PAGE_MASK.
Signed-off-by: Vincent Chen <vincentc@andestech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Current implementation of cephfs fallocate isn't correct as it doesn't
really reserve the space in the cluster, which means that a subsequent
call to a write may actually fail due to lack of space. In fact, it is
currently possible to fallocate an amount space that is larger than the
free space in the cluster. It has behaved this way since the initial
commit ad7a60de882a ("ceph: punch hole support").
Since there's no easy solution to fix this at the moment, this patch
simply removes support for all fallocate operations but
FALLOC_FL_PUNCH_HOLE (which implies FALLOC_FL_KEEP_SIZE).
Link: https://tracker.ceph.com/issues/36317 Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
When trying to complete "bpftool map update" commands, the call to
printf would print an error message that would show on the command line
if no map is found to complete the command line.
Fix it by making sure we have map ids to complete the line with, before
we try to print something.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
When we have CONFIG_STRICT_KERNEL_RWX enabled, we want to split the
linear mapping at the text/data boundary so we can map the kernel
text read only.
Currently we always use a small page at the text/data boundary, even
when that's not necessary:
Mapped 0x0000000000000000-0x0000000000e00000 with 2.00 MiB pages
Mapped 0x0000000000e00000-0x0000000001000000 with 64.0 KiB pages
Mapped 0x0000000001000000-0x0000000040000000 with 2.00 MiB pages
This is because the check that the mapping crosses the __init_begin
boundary is too strict, it also returns true when we map exactly up to
the boundary.
So fix it to check that the mapping would actually map past
__init_begin, and with that we see:
Mapped 0x0000000000000000-0x0000000040000000 with 2.00 MiB pages
Mapped 0x0000000040000000-0x0000000100000000 with 1.00 GiB pages
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
When we have CONFIG_STRICT_KERNEL_RWX enabled, we want to split the
linear mapping at the text/data boundary so we can map the kernel text
read only.
But the current logic uses small pages for the entire text section,
regardless of whether a larger page size would fit. eg. with the
boundary at 16M we could use 2M pages, but instead we use 64K pages up
to the 16M boundary:
Mapped 0x0000000000000000-0x0000000001000000 with 64.0 KiB pages
Mapped 0x0000000001000000-0x0000000040000000 with 2.00 MiB pages
Mapped 0x0000000040000000-0x0000000100000000 with 1.00 GiB pages
This is because the test is checking if addr is < __init_begin
and addr + mapping_size is >= _stext. But that is true for all pages
between _stext and __init_begin.
Instead what we want to check is if we are crossing the text/data
boundary, which is at __init_begin. With that fixed we see:
Mapped 0x0000000000000000-0x0000000000e00000 with 2.00 MiB pages
Mapped 0x0000000000e00000-0x0000000001000000 with 64.0 KiB pages
Mapped 0x0000000001000000-0x0000000040000000 with 2.00 MiB pages
Mapped 0x0000000040000000-0x0000000100000000 with 1.00 GiB pages
ie. we're correctly using 2MB pages below __init_begin, but we still
drop down to 64K pages unnecessarily at the boundary.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
When we have CONFIG_STRICT_KERNEL_RWX enabled, we try to split the
kernel linear (1:1) mapping so that the kernel text is in a separate
page to kernel data, so we can mark the former read-only.
We could achieve that just by always using 64K pages for the linear
mapping, but we try to be smarter. Instead we use huge pages when
possible, and only switch to smaller pages when necessary.
However we have an off-by-one bug in that logic, which causes us to
calculate the wrong boundary between text and data.
For example with the end of the kernel text at 16M we see:
radix-mmu: Mapped 0x0000000000000000-0x0000000001200000 with 64.0 KiB pages
radix-mmu: Mapped 0x0000000001200000-0x0000000040000000 with 2.00 MiB pages
radix-mmu: Mapped 0x0000000040000000-0x0000000100000000 with 1.00 GiB pages
ie. we mapped from 0 to 18M with 64K pages, even though the boundary
between text and data is at 16M.
With the fix we see we're correctly hitting the 16M boundary:
radix-mmu: Mapped 0x0000000000000000-0x0000000001000000 with 64.0 KiB pages
radix-mmu: Mapped 0x0000000001000000-0x0000000040000000 with 2.00 MiB pages
radix-mmu: Mapped 0x0000000040000000-0x0000000100000000 with 1.00 GiB pages
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
All properly written drivers now have error handling in the
dma_map_single / dma_map_page callers. As swiotlb_tbl_map_single already
prints a useful warning when running out of swiotlb pool space we can
also remove swiotlb_full entirely as it serves no purpose now.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Commit 43e6409db64d ("PCI: mediatek: Add MSI support for MT2712 and
MT7622") added MSI support but enabled MSI in the wrong place, at a step
in the probe sequence where clocks were not still enabled.
Fix this issue by calling mtk_pcie_enable_msi() in mtk_pcie_startup_port_v2()
since clocks are enabled when mtk_pcie_startup_port_v2() is called.
To avoid forward declaration of mtk_pcie_enable_msi(), move the
mtk_pcie_startup_port_v2() function definition in the file.
Fixes: 43e6409db64d ("PCI: mediatek: Add MSI support for MT2712 and MT7622") Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
[lorenzo.pieralisi@arm.com: squashed commit and adapted log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
A removal waits for the reset_work to complete. If a surprise removal
occurs around the same time as an error triggered controller reset, and
reset work happened to dispatch a command to the removed controller, the
command won't be recovered since the timeout work doesn't do anything
during error recovery. We wouldn't want to wait for timeout handling
anyway, so this patch fixes this by disabling the controller and killing
admin queues prior to syncing with the reset_work.
Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Since commit 8b62f87bad9c ("Btrfs: rework outstanding_extents"),
manual operations of outstanding_extent in btrfs_inode are replaced by
btrfs_mod_outstanding_extents().
The one in cluster_pages_for_defrag seems to be lost, so replace it
of btrfs_mod_outstanding_extents().
Fixes: 8b62f87bad9c ("Btrfs: rework outstanding_extents") Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
As of commit 10c77dba40ff ("powerpc/boot: Fix build failure in 32-bit
boot wrapper") the opal code is hidden behind CONFIG_PPC64_BOOT_WRAPPER,
but the boot wrapper avoids include/linux, so it does not get the normal
Kconfig flags.
We can drop the guard entirely as in commit f8e8e69cea49 ("powerpc/boot:
Only build OPAL code when necessary") the makefile only includes opal.c
in the build if CONFIG_PPC64_BOOT_WRAPPER is set.
Fixes: 10c77dba40ff ("powerpc/boot: Fix build failure in 32-bit boot wrapper") Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Prior to commit 5c2992ee7fd8a29 ("printk: remove console flushing special
cases for partial buffered lines") we would do console_cont_flush()
for each pr_cont() to print cont fragments, so console_unlock() would
actually print data:
pr_cont();
console_lock();
console_unlock()
console_cont_flush(); // print cont fragment
...
pr_cont();
console_lock();
console_unlock()
console_cont_flush(); // print cont fragment
We don't do console_cont_flush() anymore, so when we do pr_cont()
console_unlock() does nothing (unless we flushed the cont buffer):
We also wakeup klogd purposelessly for pr_cont() output - un-flushed
cont buffer is not stored in log_buf; there is nothing to pull.
Thus we can console_lock()/console_unlock()/wake_up_klogd() only when
we know that we log_store()-ed a message and there is something to
print to the consoles/syslog.
Link: http://lkml.kernel.org/r/20181002023836.4487-3-sergey.senozhatsky@gmail.com
To: Steven Rostedt <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Tejun Heo <tj@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: LKML <linux-kernel@vger.kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Once all the large flow groups (defined by the user when the flow table
is created - max_num_groups) were created, then all the following new
flow groups will have only one flow table entry, even though the flow table
has place to larger groups.
Fix the condition to prefer large flow group.
XDP_TX rings should not be limited by max_num_tx_rings_p_up.
To make sure total number of TX rings never exceed MAX_TX_RINGS,
add similar check in mlx4_en_alloc_tx_queue_per_tc(), where
a new value is assigned for num_up.
Fixes: 7e1dc5e926d5 ("net/mlx4_en: Limit the number of TX rings") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
The helper mlxsw_sp_ipip_dev_ul_tb_id() determines the underlay VRF of a
GRE tunnel. For a tunnel without a bound device, it uses the same VRF that
the tunnel is in. However in Linux, a GRE tunnel without a bound device
uses the main VRF as the underlay. Fix the function accordingly.
mlxsw further assumed that moving a tunnel to a different VRF could cause
conflict in local tunnel endpoint address, which cannot be offloaded.
However, the only way that an underlay could be changed by moving the
tunnel device itself is if the tunnel device does not have a bound device.
But in that case the underlay is always the main VRF, so there is no
opportunity to introduce a conflict by moving such device. Thus this check
constitutes a dead code, and can be removed, which do.
Fixes: 6ddb7426a7d4 ("mlxsw: spectrum_router: Introduce loopback RIFs") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Sasha Levin [Wed, 27 Nov 2019 19:56:37 +0000 (14:56 -0500)]
x86/hyperv: mark hyperv_init as __init function
BugLink: https://bugs.launchpad.net/bugs/1854975
This change was done upstream as part of 6b48cb5f8347 ("X86/Hyper-V:
Enlighten APIC access"), but that commit introduced a lot of new
functionality we don't want to backport.
This change eliminates a build warning.
Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
The userspace comedilib function 'get_cmd_generic_timed' fills
the cmd structure with an informed guess and then calls the
function 'usbduxfast_ai_cmdtest' in this driver repeatedly while
'usbduxfast_ai_cmdtest' is modifying the cmd struct until it
no longer changes. However, because of rounding errors this never
converged because 'steps = (cmd->convert_arg * 30) / 1000' and then
back to 'cmd->convert_arg = (steps * 1000) / 30' won't be the same
because of rounding errors. 'Steps' should only be converted back to
the 'convert_arg' if 'steps' has actually been modified. In addition
the case of steps being 0 wasn't checked which is also now done.
Signed-off-by: Bernd Porr <mail@berndporr.me.uk> Cc: <stable@vger.kernel.org> # 4.4+ Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20191118230759.1727-1-mail@berndporr.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
These are the Foxconn-branded variants of the Dell DW5821e modules,
same USB layout as those. The device exposes AT, NMEA and DIAG ports
in both USB configurations.
The driver was setting the device remote-wakeup feature during probe in
violation of the USB specification (which says it should only be set
just prior to suspending the device). This could potentially waste
power during suspend as well as lead to spurious wakeups.
Note that USB core would clear the remote-wakeup feature at first
resume.
The driver was setting the device remote-wakeup feature during probe in
violation of the USB specification (which says it should only be set
just prior to suspending the device). This could potentially waste
power during suspend as well as lead to spurious wakeups.
Note that USB core would clear the remote-wakeup feature at first
resume.
Fixes: 0f64478cbc7a ("USB: add USB serial mos7720 driver") Cc: stable <stable@vger.kernel.org> # 2.6.19 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Add USB ID for MOXA UPort 2210. This device contains mos7820 but
it passes GPIO0 check implemented by driver and it's detected as
mos7840. Hence product id check is added to force mos7820 mode.
Signed-off-by: Pavel Löbl <pavel@loebl.cz> Cc: stable <stable@vger.kernel.org>
[ johan: rename id defines and add vendor-id check ] Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
1. stale memory left over from the last transfer
the actual length of the data transfered needs to be checked
2. memory already freed
the error handling in appledisplay_probe() needs
to cancel the work in that case
Reported-and-tested-by: syzbot+495dab1f175edc9c2f13@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191106124902.7765-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
In case of a timeout or if a signal aborts a read
communication with the device needs to be ended
lest we overwrite an active URB the next time we
do IO to the device, as the URB may still be active.
Signed-off-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191107142856.16774-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Smatch reported that nents is not initialized and used in
stub_recv_cmd_submit(). nents is currently initialized by sgl_alloc()
and used to allocate multiple URBs when host controller doesn't
support scatter-gather DMA. The use of uninitialized nents means that
buf_len is zero and use_sg is true. But buffer length should not be
zero when an URB uses scatter-gather DMA.
To prevent this situation, add the conditional that checks buf_len
and use_sg. And move the use of nents right after the sgl_alloc() to
avoid the use of uninitialized nents.
If the error occurs, it adds SDEV_EVENT_ERROR_MALLOC and stub_priv
will be released by stub event handler and connection will be shut
down.
Fixes: ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver") Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Suwan Kim <suwan.kim027@gmail.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191111141035.27788-1-suwan.kim027@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Commit 780bc7903a32 ("virtio_ring: Support DMA APIs") makes
virtqueue_add() return -EIO when we fail to map our I/O buffers. This is
a very realistic scenario for guests with encrypted memory, as swiotlb
may run out of space, depending on it's size and the I/O load.
The virtio-blk driver interprets -EIO form virtqueue_add() as an IO
error, despite the fact that swiotlb full is in absence of bugs a
recoverable condition.
Let us change the return code to -ENOMEM, and make the block layer
recover form these failures when virtio-blk encounters the condition
described above.
Cc: stable@vger.kernel.org Fixes: 780bc7903a32 ("virtio_ring: Support DMA APIs") Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
The touch timer is set up in intf1. If the second interface does not exist,
the timer and touch input device are not setup and we get the following
error, when touch events are reported via intf0.
Local variable description: ----ircode@cxusb_rc_query
Variable was created at:
cxusb_rc_query+0x4d/0x360 drivers/media/usb/dvb-usb/cxusb.c:543
dvb_usb_read_remote_control+0xf9/0x290 drivers/media/usb/dvb-usb/dvb-usb-remote.c:261
Signed-off-by: Vito Caputo <vcaputo@pengaru.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
When parsing the UVC control descriptors fails, the error path tries to
cleanup a media device that hasn't been initialised, potentially
resulting in a crash. Fix this by initialising the media device before
the error handling path can be reached.
Visual inspection of the usbvision driver shows that it suffers from
three races between its open, close, and disconnect handlers. In
particular, the driver is careful to update its usbvision->user and
usbvision->remove_pending flags while holding the private mutex, but:
usbvision_v4l2_close() and usbvision_radio_close() don't hold
the mutex while they check the value of
usbvision->remove_pending;
usbvision_disconnect() doesn't hold the mutex while checking
the value of usbvision->user; and
also, usbvision_v4l2_open() and usbvision_radio_open() don't
check whether the device has been unplugged before allowing
the user to open the device files.
Each of these can potentially lead to usbvision_release() being called
twice and use-after-free errors.
This patch fixes the races by reading the flags while the mutex is
still held and checking for pending removes before allowing an open to
succeed.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
There is the same incorrect approach to locking implemented in
vivid_stop_generating_vid_cap(), vivid_stop_generating_vid_out() and
sdr_cap_stop_streaming().
These functions are called during streaming stopping with vivid_dev.mutex
locked. And they all do the same mistake while stopping their kthreads,
which need to lock this mutex as well. See the example from
vivid_stop_generating_vid_cap():
/* shutdown control thread */
vivid_grab_controls(dev, false);
mutex_unlock(&dev->mutex);
kthread_stop(dev->kthread_vid_cap);
dev->kthread_vid_cap = NULL;
mutex_lock(&dev->mutex);
But when this mutex is unlocked, another vb2_fop_read() can lock it
instead of vivid_thread_vid_cap() and manipulate the buffer queue.
That causes a use-after-free access later.
To fix those issues let's:
1. avoid unlocking the mutex in vivid_stop_generating_vid_cap(),
vivid_stop_generating_vid_out() and sdr_cap_stop_streaming();
2. use mutex_trylock() with schedule_timeout_uninterruptible() in
the loops of the vivid kthread handlers.
Signed-off-by: Alexander Popov <alex.popov@linux.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: <stable@vger.kernel.org> # for v3.18 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
When vbi stream is started, followed by video streaming,
the vid_cap_streaming and vid_out_streaming were not being set to true,
which would cause the video stream to stop when vbi stream is stopped.
This patch allows to set vid_cap_streaming and vid_out_streaming to true.
According to Hans Verkuil it appears that these 'if (dev->kthread_vid_cap)'
checks are a left-over from the original vivid development and should never
have been there.
Signed-off-by: Vandana BN <bnvandana@gmail.com> Cc: <stable@vger.kernel.org> # for v3.18 and up Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
If starting the transfer of a command suceeds but the transfer for the reply
fails, it is not enough to initiate killing the transfer for the
command may still be running. You need to wait for the killing to finish
before you can reuse URB and buffer.
Reported-and-tested-by: syzbot+711468aa5c3a1eabf863@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
In nbd_add_socket when krealloc succeeds, if nsock's allocation fail the
reallocted memory is leak. The correct behaviour should be assigning the
reallocted memory to config->socks right after success.
Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Since MDS and TAA mitigations are inter-related for processors that are
affected by both vulnerabilities, the followiing confusing messages can
be printed in the kernel log:
MDS: Vulnerable
MDS: Mitigation: Clear CPU buffers
To avoid the first incorrect message, defer the printing of MDS
mitigation after the TAA mitigation selection has been done. However,
that has the side effect of printing TAA mitigation first before MDS
mitigation.
[ bp: Check box is affected/mitigations are disabled first before
printing and massage. ]
Suggested-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Mark Gross <mgross@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20191115161445.30809-3-longman@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
For MDS vulnerable processors with TSX support, enabling either MDS or
TAA mitigations will enable the use of VERW to flush internal processor
buffers at the right code path. IOW, they are either both mitigated
or both not. However, if the command line options are inconsistent,
the vulnerabilites sysfs files may not report the mitigation status
correctly.
For example, with only the "mds=off" option:
vulnerabilities/mds:Vulnerable; SMT vulnerable
vulnerabilities/tsx_async_abort:Mitigation: Clear CPU buffers; SMT vulnerable
The mds vulnerabilities file has wrong status in this case. Similarly,
the taa vulnerability file will be wrong with mds mitigation on, but
taa off.
Change taa_select_mitigation() to sync up the two mitigation status
and have them turned off if both "mds=off" and "tsx_async_abort=off"
are present.
Update documentation to emphasize the fact that both "mds=off" and
"tsx_async_abort=off" have to be specified together for processors that
are affected by both TAA and MDS to be effective.
[ bp: Massage and add kernel-parameters.txt change too. ]
Fixes: 1b42f017415b ("x86/speculation/taa: Add mitigation for TSX Async Abort") Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: linux-doc@vger.kernel.org Cc: Mark Gross <mgross@linux.intel.com> Cc: <stable@vger.kernel.org> Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20191115161445.30809-2-longman@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
gawk 5.0.1 generates the following regexp warnings:
GEN /home/sasha/torvalds/tools/objtool/arch/x86/lib/inat-tables.c
awk: ../arch/x86/tools/gen-insn-attr-x86.awk:260: warning: regexp escape sequence `\:' is not a known regexp operator
awk: ../arch/x86/tools/gen-insn-attr-x86.awk:350: (FILENAME=../arch/x86/lib/x86-opcode-map.txt FNR=41) warning: regexp escape sequence `\&' is not a known regexp operator
Ealier versions of gawk are not known to generate these warnings. The
gawk manual referenced below does not list characters ':' and '&' as
needing escaping, so 'unescape' them. See
8-letter strings representing ARC perf events are stores in two
32-bit registers as ASCII characters like that: "IJMP", "IALL", "IJMPTAK" etc.
And the same order of bytes in the word is used regardless CPU endianness.
Which means in case of big-endian CPU core we need to swap bytes to get
the same order as if it was on little-endian CPU.
Otherwise we're seeing the following error message on boot:
------------------------->8----------------------
ARC perf : 8 counters (32 bits), 40 conditions, [overflow IRQ support]
sysfs: cannot create duplicate filename '/devices/arc_pct/events/pmji'
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.2.18 #3
Stack Trace:
arc_unwind_core+0xd4/0xfc
dump_stack+0x64/0x80
sysfs_warn_dup+0x46/0x58
sysfs_add_file_mode_ns+0xb2/0x168
create_files+0x70/0x2a0
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at kernel/events/core.c:12144 perf_event_sysfs_init+0x70/0xa0
Failed to register pmu: arc_pct, reason -17
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.2.18 #3
Stack Trace:
arc_unwind_core+0xd4/0xfc
dump_stack+0x64/0x80
__warn+0x9c/0xd4
warn_slowpath_fmt+0x22/0x2c
perf_event_sysfs_init+0x70/0xa0
---[ end trace a75fb9a9837bd1ec ]---
------------------------->8----------------------
What happens here we're trying to register more than one raw perf event
with the same name "PMJI". Why? Because ARC perf events are 4 to 8 letters
and encoded into two 32-bit words. In this particular case we deal with 2
events:
* "IJMP____" which counts all jump & branch instructions
* "IJMPC___" which counts only conditional jumps & branches
Those strings are split in two 32-bit words this way "IJMP" + "____" &
"IJMP" + "C___" correspondingly. Now if we read them swapped due to CPU core
being big-endian then we read "PMJI" + "____" & "PMJI" + "___C".
And since we interpret read array of ASCII letters as a null-terminated string
on big-endian CPU we end up with 2 events of the same name "PMJI".
adjust_lowmem_bounds() checks every memblocks in order to find the boundary
between lowmem and highmem. However some memblocks could be marked as NOMAP
so they are not used by kernel, which should be skipped while calculating
the boundary.
Signed-off-by: Chester Lin <clin@suse.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Remove ocfs2_is_o2cb_active(). We have similar functions to identify
which cluster stack is being used via osb->osb_cluster_stack.
Secondly, the current implementation of ocfs2_is_o2cb_active() is not
totally safe. Based on the design of stackglue, we need to get
ocfs2_stack_lock before using ocfs2_stack related data structures, and
that active_stack pointer can be NULL in the case of mount failure.
Link: http://lkml.kernel.org/r/1495441079-11708-1-git-send-email-ghe@suse.com Signed-off-by: Gang He <ghe@suse.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Reviewed-by: Eric Ren <zren@suse.com> Acked-by: Changwei Ge <ge.changwei@h3c.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
cpufreq_resume can be called even without preceding cpufreq_suspend.
This can happen in following scenario:
suspend_devices_and_enter
--> dpm_suspend_start
--> dpm_prepare
--> device_prepare : this function errors out
--> dpm_suspend: this is skipped due to dpm_prepare failure
this means cpufreq_suspend is skipped over
--> goto Recover_platform, due to previous error
--> goto Resume_devices
--> dpm_resume_end
--> dpm_resume
--> cpufreq_resume
In case schedutil is used as frequency governor, cpufreq_resume will
eventually call sugov_start, which does following:
memset(sg_cpu, 0, sizeof(*sg_cpu));
....
This effectively erases function pointer for frequency update, causing
crash later on. The function pointer would have been set correctly if
subsequent cpufreq_add_update_util_hook runs successfully, but that
function returns earlier because cpufreq_suspend was not called:
if (WARN_ON(per_cpu(cpufreq_update_util_data, cpu)))
return;
The fix is to check cpufreq_suspended first, if it's false, that means
cpufreq_suspend was not called in the first place, so do not resume
cpufreq.
Signed-off-by: Bo Yan <byan@nvidia.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Dropped printing a message ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
After reset SGMII Autoneg timer is set to 2us (bits 6 and 5 are 01).
That is not enough to finalize autonegatiation on some devices.
Increase this timer duration to maximum supported 16ms.
Signed-off-by: Max Uvarov <muvarov@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[ adapted for kernels without phy_modify_mmd ] Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
For supporting 10Mps speed in SGMII mode DP83867_10M_SGMII_RATE_ADAPT bit
of DP83867_10M_SGMII_CFG register has to be cleared by software.
That does not affect speeds 100 and 1000 so can be done on init.
Signed-off-by: Max Uvarov <muvarov@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[ adapted for kernels without phy_modify_mmd ] Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Let's limit shrinking to !ZONE_DEVICE so we can fix the current code.
We should never try to touch the memmap of offline sections where we
could have uninitialized memmaps and could trigger BUGs when calling
page_to_nid() on poisoned pages.
There is no reliable way to distinguish an uninitialized memmap from an
initialized memmap that belongs to ZONE_DEVICE, as we don't have
anything like SECTION_IS_ONLINE we can use similar to
pfn_to_online_section() for !ZONE_DEVICE memory.
E.g., set_zone_contiguous() similarly relies on pfn_to_online_section()
and will therefore never set a ZONE_DEVICE zone consecutive. Stopping
to shrink the ZONE_DEVICE therefore results in no observable changes,
besides /proc/zoneinfo indicating different boundaries - something we
can totally live with.
Before commit d0dc12e86b31 ("mm/memory_hotplug: optimize memory
hotplug"), the memmap was initialized with 0 and the node with the right
value. So the zone might be wrong but not garbage. After that commit,
both the zone and the node will be garbage when touching uninitialized
memmaps.
Toshiki reported a BUG (race between delayed initialization of
ZONE_DEVICE memmaps without holding the memory hotplug lock and
concurrent zone shrinking).
https://lkml.org/lkml/2019/11/14/1040
"Iteration of create and destroy namespace causes the panic as below:
While creating a namespace and initializing memmap, if you destroy the
namespace and shrink the zone, it will initialize the memmap outside
the zone and trigger VM_BUG_ON_PAGE(!zone_spans_pfn(page_zone(page),
pfn), page) in set_pfnblock_flags_mask()."
This BUG is also mitigated by this commit, where we for now stop to
shrink the ZONE_DEVICE zone until we can do it in a safe and clean way.
Link: http://lkml.kernel.org/r/20191006085646.5768-5-david@redhat.com Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b319] Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reported-by: Toshiki Fukasawa <t-fukasawa@vx.jp.nec.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Damian Tometzki <damian.tometzki@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Halil Pasic <pasic@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jun Yao <yaojun8558363@gmail.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Pankaj Gupta <pagupta@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qian Cai <cai@lca.pw> Cc: Rich Felker <dalias@libc.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Steve Capper <steve.capper@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Wei Yang <richardw.yang@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Yu Zhao <yuzhao@google.com> Cc: <stable@vger.kernel.org> [4.13+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Due to unneeded multiplication in the out_free_pages portion of
r10buf_pool_alloc(), when using a 3-copy raid10 layout, it is
possible to access a resync_pages offset that has not been
initialized. This access translates into a crash of the system
within resync_free_pages() while passing a bad pointer to
put_page(). Remove the multiplication, preventing access to the
uninitialized area.
Fixes: f0250618361db ("md: raid10: don't use bio's vec table to manage resync pages") Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: John Pittman <jpittman@redhat.com> Suggested-by: David Jeffery <djeffery@redhat.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Currently, data variable in ar9003_hw_thermo_cal_apply() could be
uninitialized if ar9300_otp_read_word() will fail to read the value.
Initialize data variable with 0 to prevent an undefined behavior. This
will be enough to handle error case when ar9300_otp_read_word() fails.
Fixes: 80fe43f2bbd5 ("ath9k_hw: Read and configure thermocal for AR9462") Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: stable@vger.kernel.org Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
The `ar_usb` field of `ath10k_usb_pipe_usb_pipe` objects
are initialized to point to the containing `ath10k_usb` object
according to endpoint descriptors read from the device side, as shown
below in `ath10k_usb_setup_pipe_resources`:
for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
endpoint = &iface_desc->endpoint[i].desc;
// get the address from endpoint descriptor
pipe_num = ath10k_usb_get_logical_pipe_num(ar_usb,
endpoint->bEndpointAddress,
&urbcount);
......
// select the pipe object
pipe = &ar_usb->pipes[pipe_num];
// initialize the ar_usb field
pipe->ar_usb = ar_usb;
}
The driver assumes that the addresses reported in endpoint
descriptors from device side to be complete. If a device is
malicious and does not report complete addresses, it may trigger
NULL-ptr-deref `ath10k_usb_alloc_urb_from_pipe` and
`ath10k_usb_free_urb_to_pipe`.
This patch fixes the bug by preventing potential NULL-ptr-deref.
Signed-off-by: Hui Peng <benquike@gmail.com> Reported-by: Hui Peng <benquike@gmail.com> Reported-by: Mathias Payer <mathias.payer@nebelwelt.net> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[groeck: Add driver tag to subject, fix build warning] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Explicitly exempt ZONE_DEVICE pages from kvm_is_reserved_pfn() and
instead manually handle ZONE_DEVICE on a case-by-case basis. For things
like page refcounts, KVM needs to treat ZONE_DEVICE pages like normal
pages, e.g. put pages grabbed via gup(). But for flows such as setting
A/D bits or shifting refcounts for transparent huge pages, KVM needs to
to avoid processing ZONE_DEVICE pages as the flows in question lack the
underlying machinery for proper handling of ZONE_DEVICE pages.
This fixes a hang reported by Adam Borowski[*] in dev_pagemap_cleanup()
when running a KVM guest backed with /dev/dax memory, as KVM straight up
doesn't put any references to ZONE_DEVICE pages acquired by gup().
Note, Dan Williams proposed an alternative solution of doing put_page()
on ZONE_DEVICE pages immediately after gup() in order to simplify the
auditing needed to ensure is_zone_device_page() is called if and only if
the backing device is pinned (via gup()). But that approach would break
kvm_vcpu_{un}map() as KVM requires the page to be pinned from map() 'til
unmap() when accessing guest memory, unlike KVM's secondary MMU, which
coordinates with mmu_notifier invalidations to avoid creating stale
page references, i.e. doesn't rely on pages being pinned.
Reported-by: Adam Borowski <kilobyte@angband.pl> Analyzed-by: David Hildenbrand <david@redhat.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: stable@vger.kernel.org Fixes: 3565fce3a659 ("mm, x86: get_user_pages() for dax mappings") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[sean: backport to 4.x; resolve conflict in mmu.c] Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Since we now prevent regulatory restore during STA disconnect
if concurrent AP interfaces are active, we need to reschedule
this check when the AP state changes. This fixes never doing
a restore when an AP is the last interface to stop. Or to put
it another way: we need to re-check after anything we check
here changes.
Cc: stable@vger.kernel.org Fixes: 113f3aaa81bd ("cfg80211: Prevent regulatory restore during STA disconnect in concurrent interfaces") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
A recent commit allows sockets bound to a VRF to receive ipv6 link local
packets. However, it only works for UDP and worse TCP connection attempts
to the LLA with the only listener bound to the VRF just hang where as
before the client gets a reset and connection refused. Fix by adjusting
ir_iif for LL addresses and packets received through a device enslaved
to a VRF.
Fixes: 6f12fa775530 ("vrf: mark skb for multicast or link-local as enslaved to VRF") Reported-by: Donald Sharp <sharpd@cumulusnetworks.com> Cc: Mike Manning <mmanning@vyatta.att-mail.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
When adding the memory by probing memory block in sysfs interface, there is an
obvious issue that we will unlock the device_hotplug_lock when fails to takes it.
That issue was introduced in Commit 8df1d0e4a265
("mm/memory_hotplug: make add_memory() take the device_hotplug_lock")
We should drop out in time when fails to take the device_hotplug_lock.
Fixes: 8df1d0e4a265 ("mm/memory_hotplug: make add_memory() take the device_hotplug_lock") Reported-by: Yang yingliang <yangyingliang@huawei.com> Signed-off-by: zhong jiang <zhongjiang@huawei.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
I was totally screwed up in commit eaba68785c2d ("i2c: uniphier-f:
fix race condition when IRQ is cleared"). Since that commit, if the
number of read bytes is multiple of the FIFO size (8, 16, 24... bytes),
the STOP condition could be issued twice, depending on the timing.
If this happens, the controller will go wrong, resulting in the timeout
error.
It was more than 3 years ago when I wrote this driver, so my memory
about this hardware was vague. Please let me correct the description
in the commit log of eaba68785c2d.
Clearing the IRQ status on exiting the IRQ handler is absolutely
fine. This controller makes a pause while any IRQ status is asserted.
If the IRQ status is cleared first, the hardware may start the next
transaction before the IRQ handler finishes what it supposed to do.
This partially reverts the bad commit with clear comments so that I
will never repeat this mistake.
I also investigated what is happening at the last moment of the read
mode. The UNIPHIER_FI2C_INT_RF interrupt is asserted a bit earlier
(by half a period of the clock cycle) than UNIPHIER_FI2C_INT_RB.
I consulted a hardware engineer, and I got the following information:
UNIPHIER_FI2C_INT_RF
asserted at the falling edge of SCL at the 8th bit.
UNIPHIER_FI2C_INT_RB
asserted at the rising edge of SCL at the 9th (ACK) bit.
In order to avoid calling uniphier_fi2c_stop() twice, check the latter
interrupt. I also commented this because it is obscure hardware internal.
Fixes: eaba68785c2d ("i2c: uniphier-f: fix race condition when IRQ is cleared") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Commit b682cffa3ac6 ("spi: omap2-mcspi: Set FIFO DMA trigger level to word length")
broke SPI transfers where bits_per_word != 8. This is because of
mimsatch between McSPI FIFO level event trigger size (SPI word length) and
DMA request size(word length * maxburst). This leads to data
corruption, lockup and errors like:
spi1.0: EOW timed out
Fix this by setting DMA maxburst size to 1 so that
McSPI FIFO level event trigger size matches DMA request size.
Fixes: b682cffa3ac6 ("spi: omap2-mcspi: Set FIFO DMA trigger level to word length") Cc: stable@vger.kernel.org Reported-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
PCI controller in K2G also has a limitation that memory read request
size (MRRS) must not exceed 256 bytes. Use the quirk to limit MRRS
(added for K2HK, K2L and K2E) for K2G as well.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Clang warns when one enumerated type is implicitly converted to another:
drivers/pinctrl/pinctrl-zynq.c:985:18: warning: implicit conversion from
enumeration type 'enum zynq_pin_config_param' to different enumeration
type 'enum pin_config_param' [-Wenum-conversion]
{"io-standard", PIN_CONFIG_IOSTANDARD, zynq_iostd_lvcmos18},
~ ^~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/pinctrl-zynq.c:990:16: warning: implicit conversion from
enumeration type 'enum zynq_pin_config_param' to different enumeration
type 'enum pin_config_param' [-Wenum-conversion]
= { PCONFDUMP(PIN_CONFIG_IOSTANDARD, "IO-standard", NULL, true),
~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/pinctrl/pinconf-generic.h:163:11: note: expanded from
macro 'PCONFDUMP'
.param = a, .display = b, .format = c, .has_arg = d \
^
2 warnings generated.
It is expected that pinctrl drivers can extend pin_config_param because
of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion
isn't an issue. Most drivers that take advantage of this define the
PIN_CONFIG variables as constants, rather than enumerated values. Do the
same thing here so that Clang no longer warns.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Clang warns when one enumerated type is implicitly converted to another:
drivers/pinctrl/pinctrl-lpc18xx.c:643:29: warning: implicit conversion
from enumeration type 'enum lpc18xx_pin_config_param' to different
enumeration type 'enum pin_config_param' [-Wenum-conversion]
{"nxp,gpio-pin-interrupt", PIN_CONFIG_GPIO_PIN_INT, 0},
~ ^~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/pinctrl-lpc18xx.c:648:12: warning: implicit conversion
from enumeration type 'enum lpc18xx_pin_config_param' to different
enumeration type 'enum pin_config_param' [-Wenum-conversion]
PCONFDUMP(PIN_CONFIG_GPIO_PIN_INT, "gpio pin int", NULL, true),
~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/pinctrl/pinconf-generic.h:163:11: note: expanded from
macro 'PCONFDUMP'
.param = a, .display = b, .format = c, .has_arg = d \
^
2 warnings generated.
It is expected that pinctrl drivers can extend pin_config_param because
of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion
isn't an issue. Most drivers that take advantage of this define the
PIN_CONFIG variables as constants, rather than enumerated values. Do the
same thing here so that Clang no longer warns.
When attempting to setup up a gpio hog, device probing would repeatedly
fail with -EPROBE_DEFERED errors. It was caused by a circular dependency
between the gpio and pinctrl frameworks. If the gpio-ranges property is
present in device tree, then the gpio framework will handle the gpio pin
registration and eliminate the circular dependency.
See Christian Lamparter's commit a86caa9ba5d7 ("pinctrl: msm: fix
gpio-hog related boot issues") for a detailed commit message that
explains the issue in much more detail. The code comment in this commit
came from Christian's commit.
Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Currently when an AP and STA interfaces are active in the same or different
radios, regulatory settings are restored whenever the STA disconnects. This
restores all channel information including dfs states in all radios.
For example, if an AP interface is active in one radio and STA in another,
when radar is detected on the AP interface, the dfs state of the channel
will be changed to UNAVAILABLE. But when the STA interface disconnects,
this issues a regulatory disconnect hint which restores all regulatory
settings in all the radios attached and thereby losing the stored dfs
state on the other radio where the channel was marked as unavailable
earlier. Hence prevent such regulatory restore whenever another active
beaconing interface is present in the same or other radios.
Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
The overlay metadata nodes in the FDT created from testcases.dts
are not handled properly.
The __fixups__ and __local_fixups__ node were added to the live
devicetree, but should not be.
Only the first property in the /__symbols__ node was added to the
live devicetree if the live devicetree already contained a
/__symbols node. All of the node's properties must be added.
Tested-by: Alan Tull <atull@kernel.org> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
drivers/net/ethernet/broadcom/genet/bcmgenet.c: In function 'bcmgenet_power_down':
drivers/net/ethernet/broadcom/genet/bcmgenet.c:1136:6: warning:
variable 'ret' set but not used [-Wunused-but-set-variable]
bcmgenet_power_down should return 'ret' instead of 0.
Fixes: ca8cf341903f ("net: bcmgenet: propagate errors from bcmgenet_power_down") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Fix warnings found using static analysis with cppcheck, use %d printf
format specifier for signed ints rather than %u
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
The skb for packets that are multicast or to a link-local address are
not marked as being enslaved to a VRF, if they are received on a socket
bound to the VRF. This is needed for ND and it is preferable for the
kernel not to have to deal with the additional use-cases if ll or mcast
packets are handled as enslaved. However, this does not allow service
instances listening on unbound and bound to VRF sockets to distinguish
the VRF used, if packets are sent as multicast or to a link-local
address. The fix is for the VRF driver to also mark these skb as being
enslaved to the VRF.
Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
In copy_result_to_user(), we first create a struct dlm_lock_result, which
contains a struct dlm_lksb, the last member of which is a pointer to the
lvb. Unfortunately, we copy the entire struct dlm_lksb to the result
struct, which is then copied to userspace at the end of the function,
leaking the contents of sb_lvbptr, which is a valid kernel pointer in some
cases (indeed, later in the same function the data it points to is copied
to userspace).
It is an error to leak kernel pointers to userspace, as it undermines KASLR
protections (see e.g. 65eea8edc31 ("floppy: Do not copy a kernel pointer to
user memory in FDGETPRM ioctl") for another example of this).
Signed-off-by: Tycho Andersen <tycho@tycho.ws> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
An address change for a remote port cause PRLI for the wrong protocol
to be sent. The node copy done in the discovery code skipped copying
the fc4 protocols supported as well.
Fix the copy logic for the address change. Beefed up log messages in
this area as well.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
On FCoE adapters, when running link bounce test in a loop, initiator
failed to login with switch switch and required driver reload to
recover. Switch reached a point where all subsequent FLOGIs would be
LS_RJT'd. Further testing showed the condition to be related to not
performing FCF discovery between FLOGI's.
Fix by monitoring FLOGI failures and once a repeated error is seen
repeat FCF discovery.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
During init, if pci_alloc_irq_vectors() fails, the driver has not yet setup
the IRQs. Fix the goto labels and error handling for this case.
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
In megasas_transition_to_ready() driver waits 180seconds for controller to
change FW state. Here we are calling msleep(1) in a loop for this. As
explained in timers-howto.txt, msleep(1) will actually sleep longer than
1ms. If a faulty controller is connected, we will end up waiting for much
more than 180 seconds causing unnecessary delays during load.
Change the granularity of msleep() call from 1ms to 1000ms.
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Currently driver is modifying both current & NVRAM/persistent data in
Manufacturing page11. Driver should change only current copy of
Manufacturing page11. It should not modify the persistent data.
So removed the section of code where driver is modifying the persistent
data of Manufacturing page11.
Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
If EEDPTagMode field in manufacturing page11 is set then unset it. This is
needed to fix a hardware bug only in SAS3/SAS2 cards. So, skipping
EEDPTagMode changes in Manufacturing page11 for SAS 3.5 controllers.
Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
This is to fix SYNC CACHE and START STOP command failures with
DID_NO_CONNECT during driver unload.
In driver's IO submission patch (i.e. in driver's .queuecommand()) driver
won't allow any SCSI commands to the IOC when ioc->remove_host flag is set
and hence SYNC CACHE commands which are issued to the target drives (where
write cache is enabled) during driver unload time is failed with
DID_NO_CONNECT status.
Now modified the driver to allow SYNC CACHE and START STOP commands to IOC,
even when remove_host flag is set.
Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
We are binding to the PHY using the SF2 slave MDIO bus that we create,
binding involves reading the PHY's MII_PHYSID1/2 which won't be possible
if the PHY is turned off. Temporarily turn it on/off for the bus probing
to succeeed. This fixes unbind/bind problems where the port connecting
to that PHY would be in error since it could not connect to it.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
It looks like we wanted to print a maximum of BSSList_rid.ssidLen bytes
of the ssid, but we accidentally use "%*s" (width) instead of "%.*s"
(precision) so if the ssid doesn't have a NUL terminator this could lead
to an overflow.
Static analysis. Not tested.
Fixes: e174961ca1a0 ("net: convert print_mac to %pM") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
This message greatly spams the log under heavy Tx of frames with BK access
class which is especially true when operating as AP. It is also not informative
as the "agg'ablity" of TIDs are set once and never change.
Fix this by logging only in debug mode.
Signed-off-by: Ali MJ Al-Nasrawy <alimjalnasrawy@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Add missing break statement in order to prevent the code from falling
through to the default case.
Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
We return 0 unconditionally at the end of
'wlcore_vendor_cmd_smart_config_start()'.
However, 'ret' is set to some error codes in several error handling paths
and we already return some error codes at the beginning of the function.
Return 'ret' instead to propagate the error code.
Fixes: 80ff8063e87c ("wlcore: handle smart config vendor commands") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Note: this patch fixes a problem in a feature outside of btrfs ("kernel
hacking: add a config option to disable compiler auto-inlining") and is
applied ahead of time due to cross-subsystem dependencies.
On 32-bit ARM with gcc-8, I see a link error with the addition of the
CONFIG_NO_AUTO_INLINE option:
fs/btrfs/super.o: In function `btrfs_statfs':
super.c:(.text+0x67b8): undefined reference to `__aeabi_uldivmod'
super.c:(.text+0x67fc): undefined reference to `__aeabi_uldivmod'
super.c:(.text+0x6858): undefined reference to `__aeabi_uldivmod'
super.c:(.text+0x6920): undefined reference to `__aeabi_uldivmod'
super.c:(.text+0x693c): undefined reference to `__aeabi_uldivmod'
fs/btrfs/super.o:super.c:(.text+0x6958): more undefined references to `__aeabi_uldivmod' follow
So far this is the only file that shows the behavior, so I'd propose
to just work around it by marking the functions as 'static inline'
that normally get inlined here.
The reference to __aeabi_uldivmod comes from a div_u64() which has an
optimization for a constant division that uses a straight '/' operator
when the result should be known to the compiler. My interpretation is
that as we turn off inlining, gcc still expects the result to be constant
but fails to use that constant value.
Link: https://lkml.kernel.org/r/20181103153941.1881966-1-arnd@arndb.de Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Changbin Du <changbin.du@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[ add the note ] Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Empty executable arguments were being skipped when printing out the list
of arguments in an EXECVE record, making it appear they were somehow
lost. Include empty arguments as an itemized empty string.
Passes audit-testsuite. GH issue tracker at
https://github.com/linux-audit/audit-kernel/issues/99
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: cleaned up the commit metadata] Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
In the user manual of A64 SoC, the bit 22 and 23 of pll-mipi control
register is called "LDO{1,2}_EN", and according to the BSP source code
from Allwinner , the LDOs are enabled during the clock's enabling
process.
The clock failed to generate output if the two LDOs are not enabled.
Add the two bits to the clock's gate bits, so that the LDOs are enabled
when the PLL is enabled.
Fixes: c6a0637460c2 ("clk: sunxi-ng: Add A64 clocks") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
When CONFIG_CC_OPTIMIZE_FOR_DEBUGGING is enabled, the compiler
fails to optimize out a dead code path, which leads to a link failure:
net/openvswitch/conntrack.o: In function `ovs_ct_set_labels':
conntrack.c:(.text+0x2e60): undefined reference to `nf_connlabels_replace'
In this configuration, we can take a shortcut, and completely
remove the contrack label code. This may also help the regular
optimization.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
When load_balance() fails to move some load because of task affinity,
we end up increasing sd->balance_interval to delay the next periodic
balance in the hopes that next time we look, that annoying pinned
task(s) will be gone.
However, idle_balance() pays no attention to sd->balance_interval, yet
it will still lead to an increase in balance_interval in case of
pinned tasks.
If we're going through several newidle balances (e.g. we have a
periodic task), this can lead to a huge increase of the
balance_interval in a very small amount of time.
To prevent that, don't increase the balance interval when going
through a newidle balance.
This is a similar approach to what is done in commit 58b26c4c0257
("sched: Increment cache_nice_tries only on periodic lb"), where we
disregard newidle balance and rely on periodic balance for more stable
results.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Dietmar.Eggemann@arm.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: patrick.bellasi@arm.com Cc: vincent.guittot@linaro.org Link: http://lkml.kernel.org/r/1537974727-30788-2-git-send-email-valentin.schneider@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Before calling dev_hard_start_xmit(), upper layers tried
to cook optimal skb list based on BQL budget.
Problem is that GSO packets can end up comsuming more than
the BQL budget.
Breaking the loop is not useful, since requeued packets
are ahead of any packets still in the qdisc.
It is also more expensive, since next TX completion will
push these packets later, while skbs are not in cpu caches.
It is also a behavior difference with TSO packets, that can
break the BQL limit by a large amount.
Note that drivers should use __netdev_tx_sent_queue()
in order to have optimal xmit_more support, and avoid
useless atomic operations as shown in the following patch.
Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>