Chen-Yu Tsai [Tue, 17 Oct 2017 12:18:00 +0000 (20:18 +0800)]
drm/sun4i: hdmi: Support HDMI controller on A10
The HDMI controller in the A10 SoC is the same as the one currently
supported in the A10s. It has slightly different setup parameters.
Since these parameters are not thoroughly understood, we add support
for this variant by copying these parameters verbatim.
Jonathan Liu [Tue, 17 Oct 2017 12:17:59 +0000 (20:17 +0800)]
drm/sun4i: tcon: Add support for A10 TCON
The A10 has two TCONs that are similar to the ones found on other SoCs.
Like the A31, TCON0 has a register used to mux the TCON outputs to the
downstream encoders. The bit fields are slightly different.
Chen-Yu Tsai [Tue, 17 Oct 2017 12:17:58 +0000 (20:17 +0800)]
drm/sun4i: backend: Support output muxing
The backend has a mux to select the destination of the data to output
to. It can select the TCON or the frontends. On the A20, it includes
an option to output to the second TCON. This is not documented in the
user manual, but the vendor kernel uses it nevertheless, so the second
backend outputs to the second TCON.
Although the muxing can be changed on the fly, DRM needs to be able to
group a bunch of layers such that they get switched to another crtc
together. This is because the display backend does the layer compositing,
while the TCON generates the display timings. This constraint is not
supported by DRM.
Here we simply pair up backends and TCONs with the same ID.
Maxime Ripard [Tue, 17 Oct 2017 09:06:14 +0000 (11:06 +0200)]
drm/sun4i: tcon: Move out the tcon0 common setup
Some channel0 setup has to be done, no matter what the output interface is
(RGB, CPU, LVDS). Move that code into a common function in order to avoid
duplication.
Maxime Ripard [Tue, 17 Oct 2017 09:06:13 +0000 (11:06 +0200)]
drm/sun4i: tcon: Don't rely on encoders to set the TCON mode
Just like we did for the TCON enable and disable, for historical reasons we
used to rely on the encoders calling the TCON mode_set function, while the
CRTC has a callback for that.
Let's implement it in order to reduce the boilerplate code.
Maxime Ripard [Tue, 17 Oct 2017 09:06:12 +0000 (11:06 +0200)]
drm/sun4i: tcon: Don't rely on encoders to enable the TCON
So far, we've required all the TCON-connected encoders to call the TCON
enable and disable functions.
This was made this way because in the RGB/LVDS case, the TCON is the CRTC
and the encoder. However, in all the other cases (HDMI, TV, DSI, etc.), we
have another encoder down the road that needs to be programmed.
We also needed to know which channel the encoder is connected to, which is
encoder-specific.
The CRTC's enable and disable callbacks can work just fine for our use
case, and we can get the channel to use just by looking at the type of
encoder, since that is fixed. Implement those callbacks, which will
remove some of the encoder boilerplate.
Maxime Ripard [Tue, 17 Oct 2017 09:06:08 +0000 (11:06 +0200)]
drm/sun4i: Implement endpoint parsing using kfifo
The commit da82b8785eeb ("drm/sun4i: add components in breadth first
traversal order") implemented a breadth first traversal of our device tree
nodes graph. However, it was relying on the kernel linked lists, and those
are not really safe for addition.
Indeed, in a single pipeline stage, your first stage (ie, the mixer or
fronted) will be queued, and it will be the final iteration of that list as
far as list_for_each_entry_safe is concerned. Then, during that final
iteration, we'll queue another element (the TCON or the backend) that
list_for_each_entry_safe will not account for, and we will leave the loop
without having iterated over all the elements. And since we won't have
built our components list properly, the DRM driver will be left
non-functional.
We can instead use a kfifo to queue and enqueue components in-order, as was
the original intention. This also has the benefit of removing any dynamic
allocation, making the error handling path simpler too. The only thing
we're losing is the ability to tell whether an element has already been
queued, but that was only needed to remove spurious logs, and therefore
purely cosmetic.
This means that this commit effectively reverses e8afb7b67fba ("drm/sun4i:
don't add components that are already in the queue").
Chen-Yu Tsai [Tue, 17 Oct 2017 04:23:47 +0000 (12:23 +0800)]
drm/sun4i: backend: Offset layer buffer address by DRAM starting address
The display backend, as well as other peripherals that have a DRAM
clock gate and access DRAM directly, bypassing the system bus,
address the DRAM starting from 0x0, while physical addresses the
system uses starts from 0x40000000 (or 0x20000000 in A80's case).
This issue was witnessed on the Cubietruck, which has 2GB of RAM.
Devices with less RAM function normally due to the DRAM address
wrapping around. CMA seems to always allocate its buffer at a
very high address, close to the end of DRAM.
On a 1GB RAM device, the physical address would be something like
0x78000000. The DRAM address 0x78000000 would access the same DRAM
region as 0x38000000 on a system, as the DRAM address would only
span 0x0 ~ 0x3fffffff. The bit 0x40000000 is non-functional in this
case.
However on the Cubietruck, the DRAM is 2GB. The physical address
is 0x40000000 ~ 0xbfffffff. The buffer would be something like
0xb8000000. But the DRAM address span 0x0 ~ 0x7fffffff, meaning
the buffer address wraps around to 0x38000000, which is wrong.
The correct DRAM address for it should be 0x78000000.
Correct the address configured into the backend layer registers
by PHYS_OFFSET to account for this.
drm/atomic: Check for busy planes/connectors before setting the commit
We still want to fail with -EBUSY if a plane or connector is part of
a commit, even if it will be assigned to a new commit.
This closes a small hole left open where we should return -EBUSY.
It's not severe, because wait_for_dependencies and swap_state helpers
still block. But it should return -EBUSY and not stall.
drm/atomic: Make atomic helper track newly assigned planes correctly, v2.
Commit 669c9215afea ("drm/atomic: Make async plane update checks work as
intended, v2.") forced planes to always be tracked, but forgot to
explicitly get the crtc commit from the new crtc when available.
This broke plane commit tracking, and caused kms_atomic_transitions
to randomly fail with -EBUSY.
Changes since v1:
- Prefer new_crtc_state->crtc above old_crtc_state->crtc.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 669c9215afea ("drm/atomic: Make async plane update checks work as intended, v2.") Cc: Gustavo Padovan <gustavo.padovan@collabora.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102671
Testcase: kms_atomic_transitions Link: https://patchwork.freedesktop.org/patch/msgid/20171017052047.8983-1-maarten.lankhorst@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Robert Tarasov [Fri, 13 Oct 2017 00:13:50 +0000 (17:13 -0700)]
drm/udl: Reading all edid blocks in DRM/UDL driver
Now DRM/UDL driver retreives all edid data blocks instead of only base one.
Previous approch could lead to improper initialization of video mode with
certain monitors.
Robert Tarasov [Fri, 13 Oct 2017 00:13:49 +0000 (17:13 -0700)]
drm/udl: Fixed problem with UDL adpater reconnection
Fixed problem with DisplayLink and DisplayLink certified adapers in drm/udl
driver when adapter doesn't want to work if it was initialized with
disconnected DVI cable by enabling drm connectot polling and updating
current connector's state.
Haneen Mohammed [Wed, 20 Sep 2017 18:57:16 +0000 (12:57 -0600)]
drm/armada: Replace drm_framebuffer_reference/unreference() with _get/put()
This patch replace instances of drm_framebuffer_reference/unreference with
*_get/put() suffixes, because get/put is shorter and consistent with the
kernel use of *_get/put suffixes.
This was done with the following Coccinelle script:
Haneen Mohammed [Wed, 20 Sep 2017 18:54:48 +0000 (12:54 -0600)]
drm/armada: Replace drm_gem_object_reference/unreference() with _get/put()
This patch replace instances of drm_gem_object_reference/unreference with
*_get/put() suffixes, because get/put is shorter and consistent with the
kernel use of *_get/put() suffixes.
This was done with the following Coccinelle script:
Boris BREZILLON [Thu, 5 Oct 2017 11:29:17 +0000 (13:29 +0200)]
drm/gem-cma-helper: Change the level of the allocation failure message
drm_gem_cma_create() prints an error message when dma_alloc_wc() fails to
allocate the amount of memory we requested. This can lead to annoying
error messages when CMA is only one possible source of memory for the BO
allocation. Turn this error message into a debug one.
Jérémy Lefaure [Mon, 16 Oct 2017 02:33:56 +0000 (22:33 -0400)]
drm/via: use ARRAY_SIZE
Using the ARRAY_SIZE macro improves the readability of the code.
Found with Coccinelle with the following semantic patch:
@r depends on (org || report)@
type T;
T[] E;
position p;
@@
(
(sizeof(E)@p /sizeof(*E))
|
(sizeof(E)@p /sizeof(E[...]))
|
(sizeof(E)@p /sizeof(T))
)
Jérémy Lefaure [Mon, 16 Oct 2017 02:30:46 +0000 (22:30 -0400)]
drm/gma500: use ARRAY_SIZE
Using the ARRAY_SIZE macro improves the readability of the code. Also,
it is useless to re-invent it.
Found with Coccinelle with the following semantic patch:
@r depends on (org || report)@
type T;
T[] E;
position p;
@@
(
(sizeof(E)@p /sizeof(*E))
|
(sizeof(E)@p /sizeof(E[...]))
|
(sizeof(E)@p /sizeof(T))
)
Chen-Yu Tsai [Sat, 14 Oct 2017 04:02:52 +0000 (12:02 +0800)]
drm/sun4i: hdmi: Move PAD_CTRL1 setting to mode_set function
Initially we configured the PAD_CTRL1 register at probe/bind time.
However it seems the HDMI controller will modify some of the bits
in this register by itself. On the A10 it is particularly annoying
as it toggles the output invert bits, which inverts the colors on
the display output.
The U-boot driver this driver is based on sets this register twice,
though it seems it's only needed for actual display output. Hence
we move it to the mode_set function.
While debugging inverted color from the HDMI output on the A10, I
found that the lowest 3 bits were set. These were cleared on A20
boards that had normal display output. By manually toggling these
bits the mapping of the color components to these bits was found.
While these are not used anywhere, it would be nice to document
them somewhere.
Chen-Yu Tsai [Sat, 14 Oct 2017 04:02:49 +0000 (12:02 +0800)]
drm/sun4i: backend: Add comment explaining why registers are cleared
Many of the backend's layer configuration registers have undefined
default values. This poses a risk as we use regmap_update_bits in
some places, and don't overwrite the whole register.
At probe/bind time we explicitly clear all the control registers
by writing 0 to them. This patch adds a more detailed explanation
on why we're doing this.
Chen-Yu Tsai [Sat, 14 Oct 2017 04:02:48 +0000 (12:02 +0800)]
drm/sun4i: backend: Use drm_fb_cma_get_gem_addr() to get display memory
Commit 4636ce93d5b2 ("drm/fb-cma-helper: Add drm_fb_cma_get_gem_addr()")
adds a new helper, which covers fetching a drm_framebuffer's GEM object
and calculating the buffer address for a given plane.
This patch uses this helper to replace our own open coded version of the
same function.
Chen-Yu Tsai [Sat, 14 Oct 2017 04:02:46 +0000 (12:02 +0800)]
drm/sun4i: don't add components that are already in the queue
Even though the components framework can handle duplicate entries,
the extra entries cause a lot more debug messages to be generated,
which would be confusing to developers not familiar with our driver
and the framework in general.
Instead, we can scan the relatively small queue and check if the
component to be added is already queued up. Since the display
pipelines are symmetrical (not considering the third display
pipeline on the A80), and we add components level by level, when
we get to the second instance at the same level, any shared downstream
components would already be in the queue.
Eric Anholt [Wed, 27 Sep 2017 19:32:09 +0000 (12:32 -0700)]
drm/vc4: Fix pitch setup for T-format scanout.
The documentation said to use src_w here, and I didn't consider that
we actually needed to be using pitch somewhere in our setup. Fixes
scanout on my DSI panel when X11 does initial setup with 1920x1080
HDMI and 800x480 DSI both at 0,0 of the same framebuffer.
Since the driver is relying on the atomic helpers, remove the explicit
.best_encoder assignment and let the core call
drm_atomic_helper_best_encoder().
drm/drm_of: Move drm_of_panel_bridge_remove_function into header.
Core drm shouldn't depend on anything in drm-kms-helper, or the drm
module will fail to load.
insmod drm fails with
[ 6087.674390] drm: Unknown symbol drm_panel_bridge_remove (err 0)
which is defined in drm_kms_helper.ko
This call was added by commit c70087e8f16f ("drm/drm_of: add
drm_of_panel_bridge_remove function"), and the fix is defining it in the
drm_of.h header, to break the circular dependency.
Thierry Reding [Thu, 12 Oct 2017 14:08:57 +0000 (16:08 +0200)]
drm/atomic-helper: Fix reference to drm_crtc_send_vblank_event()
Fix up this reference so that the proper link is generated in the
documentation and so that people don't go chasing after the wrong
function for an embarrassingly long time.
Arnd Bergmann [Thu, 5 Oct 2017 12:09:39 +0000 (14:09 +0200)]
drm/rockchip: add PINCTRL dependency for LVDS
The new driver fails to build when CONFIG_PINCTRL is disabled:
drivers/gpu/drm/rockchip/rockchip_lvds.c: In function 'rockchip_lvds_grf_config':
drivers/gpu/drm/rockchip/rockchip_lvds.c:229:39: error: dereferencing pointer to incomplete type 'struct dev_pin_info'
if (lvds->pins && !IS_ERR(lvds->pins->default_state))
Ville Syrjälä [Tue, 10 Oct 2017 13:33:22 +0000 (16:33 +0300)]
drm/vblank: Fix flip event vblank count
On machines where the vblank interrupt fires some time after the start
of vblank (or we just manage to race with the vblank interrupt handler)
we will currently stuff a stale vblank counter value into the flip event,
and thus we'll prematurely complete the flip.
Switch over to drm_crtc_accurate_vblank_count() to make sure we have an
up to date counter value, crucially also remember to add the +1 so that
the delayed vblank interrupt won't complete the flip prematurely.
Jani Nikula [Mon, 9 Oct 2017 09:29:57 +0000 (12:29 +0300)]
drm/dp: WARN about invalid/unknown link rates and bw codes
Falling back to the lowest value is likely the only thing we can do, but
doing it silently seems like a bad thing to do. Catch it early and make
loud noises.
Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171009092959.29021-1-jani.nikula@intel.com
Maciej Purski [Thu, 24 Aug 2017 08:58:07 +0000 (10:58 +0200)]
drm/bridge/sii8620: add remote control support
MHL specification defines Remote Control Protocol(RCP) to
send input events between MHL devices.
The driver now recognizes RCP messages and reacts to them
by reporting key events to input subsystem, allowing
a user to control a device using TV remote control.
Chen-Yu Tsai [Tue, 10 Oct 2017 03:20:04 +0000 (11:20 +0800)]
drm/sun4i: hdmi: Add support for controller hardware variants
The HDMI controller found in earlier Allwinner SoCs have slight
differences between the A10, A10s, and the A31:
- Need different initial values for the PLL related registers
- Different behavior of the DDC and TMDS clocks
- Different register layout for the DDC portion
- Separate DDC parent clock on the A31
- Explicit reset control
For the A31, the HDMI TMDS clock has a different value offset for
the divider. The HDMI DDC block is different from the one in the
other SoCs. As far as the DDC clock goes, it has no pre-divider,
as it is clocked from a slower parent clock, not the TMDS clock.
The divider offset from the register value is different. And the
clock control register is at a different offset.
A new variant data structure is created to store pointers to the
above functions, structures, and the different initial values.
Another flag notates whether there is a separate DDC parent clock.
If not, the TMDS clock is passed to the DDC clock create function,
as before.
Regmap fields are used to deal with the different register layout
of the DDC block.
Chen-Yu Tsai [Tue, 10 Oct 2017 03:20:03 +0000 (11:20 +0800)]
dt-bindings: display: sun4i: Add binding for A31 HDMI controller
The HDMI controller in the A31 SoC is slightly different from the
earlier version. In addition to the TMDS clock and DDC controls,
this version now takes a second DDC clock input.
Add a compatible string for it, and add the DDC clock input to the
list of clocks required.
Chen-Yu Tsai [Tue, 10 Oct 2017 03:20:02 +0000 (11:20 +0800)]
drm/sun4i: hdmi: Allow using second PLL as TMDS clk parent
On SoCs with two display pipelines, it is possible that the two
pipelines are active at the same time, with potentially incompatible
dot clocks.
Let the HDMI encoder's TMDS clock go through all of its parents when
calculating possible clock rates. This allows usage of the second video
PLL as its parent.
Chen-Yu Tsai [Tue, 10 Oct 2017 03:20:01 +0000 (11:20 +0800)]
drm/sun4i: hdmi: create a regmap for later use
The HDMI driver is written with readl/writel I/O to the registers.
However, to support the A31 variant, which has a different layout
for the DDC registers, it was recommended to use regfields to have
a cleaner implementation. To use regfields, we need to create an
underlying regmap.
This patch only adds the regmap. It does not convert the existing
driver accesses to use regmap.
Chen-Yu Tsai [Tue, 10 Oct 2017 03:20:00 +0000 (11:20 +0800)]
drm/sun4i: hdmi: Disable clks in bind function error path and unbind function
The HDMI driver enables the bus and mod clocks in the bind function, but
does not disable them if it then bails our due to any errors. Neither
does it disable the clocks in the unbind function.
Fix this by adding a proper error path to the bind function, and
clk_disable_unprepare calls to the unbind function.
Also rename the err_cleanup_connector label to err_cleanup_encoder,
since it is the encoder that gets cleaned up.
Chen-Yu Tsai [Tue, 10 Oct 2017 03:19:58 +0000 (11:19 +0800)]
drm/sun4i: tcon: Add variant callback for TCON output muxing
Different SoCs have different muxing options and values for the TCON
outputs. Instead of stuffing every possibility in sun4i_tcon_set_mux(),
add a callback pointer to sun4i_tcon_quirks that each TCON variant
can use to provide muxing support.
The current muxing options in sun4i_tcon_set_mux() for sun5i-a13 are
moved to a new sun5i-specific callback function.
Since the new callback replaces what the .has_unknown_mux field in
tcon quirks did in the past, the field is removed.
drm/drm_of: add drm_of_panel_bridge_remove function
This function is the pendant of drm_of_find_panel_or_bridge()
to remove a previously allocated panel_bridge.
Given a specific port and endpoint it remove the panel bridge.
Since drm_panel_bridge_remove() will check that bridge parameter
is not NULL and is a real drm_panel_bridge and no a simple bridge
it is safe to call it directly.
Eric Anholt [Wed, 27 Sep 2017 19:36:54 +0000 (12:36 -0700)]
drm/panel: Add support for the Raspberry Pi 7" Touchscreen.
This driver communicates with the Atmel microcontroller for sequencing
the poweron of the TC358762 DSI-DPI bridge and controlling the
backlight PWM.
v2: Set the same default orientation as the closed source firmware
used, which is the best for viewing angle.
v3: Rewrite as an i2c client driver after bridge driver rejection.
v4: Finish probe without the DSI host, using the new delayed
registration, and attach to the host during mipi_dsi_driver probe.
v5: Rework to drop the "probe without DSI host" mode again, now that
vc4 will create the host early on.
v6: Drop unused brightness #define (noticed by Thierry)
Maciej Purski [Thu, 5 Oct 2017 14:07:10 +0000 (16:07 +0200)]
drm/bridge: add Silicon Image SiI9234 driver
SiI9234 transmitter converts eTMDS/HDMI signal to MHL 1.0.
It is controlled via I2C bus. Its interaction with other
devices in video pipeline is performed mainly on HW level.
The only interaction it does on device driver level is
filtering-out unsupported video modes, it exposes drm_bridge
interface to perform this operation.
This patch is based on the code refactored by Tomasz Stanislawski
<t.stanislaws@samsung.com>, which was initially developed by:
Adam Hampson <ahampson@sta.samsung.com>
Erik Gilling <konkers@android.com>
Shankar Bandal <shankar.b@samsung.com>
Dharam Kumar <dharam.kr@samsung.com>
Commit 669c9215afea ("drm/atomic: Make async plane update checks work as
intended, v2.") assumed incorrectly that if only 1 plane is matched in
the loop, the variables will be set to that plane. In reality we reset
them to NULL every time a new plane was iterated. This behavior is
surprising, so fix this by making the for loops only assign the
variables on a match.
When we have not added all the planes/crtc/connector to the state, and
there's a few NULL ones after the last one we iterated, te assumption
is broken that the pointers will hold the values from the last loop
iteration, which holds true for all other for_each macros we're using.
Except of course the iterator pointer itself, but that one really is
entirely internal.
Dave Airlie [Fri, 6 Oct 2017 01:10:25 +0000 (11:10 +1000)]
Merge tag 'drm-misc-next-2017-10-05' of git://anongit.freedesktop.org/git/drm-misc into drm-next
More drm-misc for 4.15:
Cross-subsystem Changes:
- bunch more simple outreachy patches (Meghana Madhyastha, Aishwarya
Pant, Haneen Mohammed)
- Quite a pile of static checker/cocci/spelling fixups all over.
- Final driver patches+core cleanup of Noralf's new drm_gem_fb_create
helper.
Core Changes:
- legacy DPMS docs improved
- add dri-devel m-l to fbdev to catch people who try to fix
fbcon-on-kms bugs in the wrong place
Driver Changes:
- vc4: prep for dsi panels (Eric)
* tag 'drm-misc-next-2017-10-05' of git://anongit.freedesktop.org/git/drm-misc: (34 commits)
drm: fix typo in drm_gem_get_pages() comment
MAINTAINERS: Add dri-devel as a mailing list for anything fbdev
drm/virtio: Replace instances of reference/unreference with get/put
drm/fb-cma-helper: Remove unused functions
drm/tve200: Use drm_gem_fb_create() and drm_gem_fb_prepare_fb()
drm/sun4i: Use drm_gem_fb_create()
drm/shmobile: Use drm_gem_fb_create()
drm/rcar-du: Use drm_gem_fb_create()
drm/mxsfb: Use drm_gem_fb_create() and drm_gem_fb_prepare_fb()
drm/meson: Use drm_gem_fb_create()
drm/hisilicon/kirin: Use drm_gem_fb_create()
drm/fsl-dcu: Use drm_gem_fb_create()
drm/tinydrm: Use drm_gem_framebuffer_helper
drm: of: always initialize panel in drm_of_find_panel_or_bridge()
drm/tve200: Check for IS_ERR instead of NULL in probe
drm/tve200: make two functions static
drm/armada: Remove unused #include <drmP.h>
drm/rockchip: Rely on the default best_encoder() behavior
drm/vc4: Set up the DSI host at pdev probe time, not component bind.
drm/vc4: Avoid using vrefresh==0 mode in DSI htotal math.
...
Jordan Crouse [Tue, 3 Oct 2017 15:38:10 +0000 (09:38 -0600)]
drm: fix typo in drm_gem_get_pages() comment
I spent an embarrassingly long time looking for drm_gem_init_object()
before I realized I was actually looking for drm_gem_object_init().
Fix the typo to keep other poor developers from suffering the same
fate.
regmap: add iopoll-like polling macro for regmap_field
This patch adds a macro regmap_field_read_poll_timeout that works
similar to the readx_poll_timeout defined in linux/iopoll.h, except
that this can also return the error value returned by a failed
regmap_field_read.
Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org>
Daniel Vetter [Fri, 8 Sep 2017 15:35:28 +0000 (17:35 +0200)]
MAINTAINERS: Add dri-devel as a mailing list for anything fbdev
fbdev is in maintenance only, except that it's still used by drm
through the drm fbdev emulation, to be able to use fbcon. And people
might want to sometimes extend fbcon to enable new features for drm
drivers, e.g. Hans' panel orientation work.
The problem is that when those patches only touch fbdev code they'll
never show up on drm developer's radar, which means we end up with
designs that don't really fit whell into the full stack. That happened
a bit with the panel orientation work, where an fbcon patch made it
into 4.14, implementing a design that won't really work on the drm
side. Which means we now have to redo things, and on top coordinate 2
subsystem trees.
Since fbdev is super low-volume we can prevent this in the future by
simply adding the dri-devel mailing list to the fbdev subsystem.
Cc: Hans de Goede <hdegoede@redhat.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Acked-by: Sean Paul <seanpaul@chromium.org> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170908153528.17528-1-daniel.vetter@ffwll.ch
Linus Torvalds [Sun, 1 Oct 2017 20:55:32 +0000 (13:55 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"This contains the following fixes and improvements:
- Avoid dereferencing an unprotected VMA pointer in the fault signal
generation code
- Fix inline asm call constraints for GCC 4.4
- Use existing register variable to retrieve the stack pointer
instead of forcing the compiler to create another indirect access
which results in excessive extra 'mov %rsp, %<dst>' instructions
- Disable branch profiling for the memory encryption code to prevent
an early boot crash
- Fix a sparse warning caused by casting the __user annotation in
__get_user_asm_u64() away
- Fix an off by one error in the loop termination of the error patch
in the x86 sysfs init code
- Add missing CPU IDs to various Intel specific drivers to enable the
functionality on recent hardware
- More (init) constification in the numachip code"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Use register variable to get stack pointer value
x86/mm: Disable branch profiling in mem_encrypt.c
x86/asm: Fix inline asm call constraints for GCC 4.4
perf/x86/intel/uncore: Correct num_boxes for IIO and IRP
perf/x86/intel/rapl: Add missing CPU IDs
perf/x86/msr: Add missing CPU IDs
perf/x86/intel/cstate: Add missing CPU IDs
x86: Don't cast away the __user in __get_user_asm_u64()
x86/sysfs: Fix off-by-one error in loop termination
x86/mm: Fix fault error path using unsafe vma pointer
x86/numachip: Add const and __initconst to numachip2_clockevent
Linus Torvalds [Sun, 1 Oct 2017 20:03:16 +0000 (13:03 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"This adds a new timer wheel function which is required for the
conversion of the timer callback function from the 'unsigned long
data' argument to 'struct timer_list *timer'. This conversion has two
benefits:
1) It makes struct timer_list smaller
2) Many callers hand in a pointer to the timer or to the structure
containing the timer, which happens via type casting both at setup
and in the callback. This change gets rid of the typecasts.
Once the conversion is complete, which is planned for 4.15, the old
setup function and the intermediate typecast in the new setup function
go away along with the data field in struct timer_list.
Merging this now into mainline allows a smooth queueing of the actual
conversion in the affected maintainer trees without creating
dependencies"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
um/time: Fixup namespace collision
timer: Prepare to change timer callback argument type
Linus Torvalds [Sun, 1 Oct 2017 19:34:42 +0000 (12:34 -0700)]
Merge branch 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull smp/hotplug fixes from Thomas Gleixner:
"This addresses the fallout of the new lockdep mechanism which covers
completions in the CPU hotplug code.
The lockdep splats are false positives, but there is no way to
annotate that reliably. The solution is to split the completions for
CPU up and down, which requires some reshuffling of the failure
rollback handling as well"
* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp/hotplug: Hotplug state fail injection
smp/hotplug: Differentiate the AP completion between up and down
smp/hotplug: Differentiate the AP-work lockdep class between up and down
smp/hotplug: Callback vs state-machine consistency
smp/hotplug: Rewrite AP state machine core
smp/hotplug: Allow external multi-instance rollback
smp/hotplug: Add state diagram
Linus Torvalds [Sun, 1 Oct 2017 19:10:02 +0000 (12:10 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"The scheduler pull request comes with the following updates:
- Prevent a divide by zero issue by validating the input value of
sysctl_sched_time_avg
- Make task state printing consistent all over the place and have
explicit state characters for IDLE and PARKED so they wont be
displayed as 'D' state which confuses tools"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/sysctl: Check user input value of sysctl_sched_time_avg
sched/debug: Add explicit TASK_PARKED printing
sched/debug: Ignore TASK_IDLE for SysRq-W
sched/debug: Add explicit TASK_IDLE printing
sched/tracing: Use common task-state helpers
sched/tracing: Fix trace_sched_switch task-state printing
sched/debug: Remove unused variable
sched/debug: Convert TASK_state to hex
sched/debug: Implement consistent task-state printing
Linus Torvalds [Sun, 1 Oct 2017 19:06:31 +0000 (12:06 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
- Prevent a division by zero in the perf aux buffer handling
- Sync kernel headers with perf tool headers
- Fix a build failure in the syscalltbl code
- Make the debug messages of perf report --call-graph work correctly
- Make sure that all required perf files are in the MANIFEST for
container builds
- Fix the atrr.exclude kernel handling so it respects the
perf_event_paranoid and the user permissions
- Make perf test on s390x work correctly
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/aux: Only update ->aux_wakeup in non-overwrite mode
perf test: Fix vmlinux failure on s390x part 2
perf test: Fix vmlinux failure on s390x
perf tools: Fix syscalltbl build failure
perf report: Fix debug messages with --call-graph option
perf evsel: Fix attr.exclude_kernel setting for default cycles:p
tools include: Sync kernel ABI headers with tooling headers
perf tools: Get all of tools/{arch,include}/ in the MANIFEST
Linus Torvalds [Sun, 1 Oct 2017 19:02:47 +0000 (12:02 -0700)]
Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"Two fixes for locking:
- Plug a hole the pi_stat->owner serialization which was changed
recently and failed to fixup two usage sites.
- Prevent reordering of the rwsem_has_spinner() check vs the
decrement of rwsem count in up_write() which causes a missed
wakeup"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwsem-xadd: Fix missed wakeup due to reordering of load
futex: Fix pi_state->owner serialization
Linus Torvalds [Sun, 1 Oct 2017 19:00:56 +0000 (12:00 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
- Add a missing NULL pointer check in free_irq()
- Fix a memory leak/memory corruption in the generic irq chip
- Add missing rcu annotations for radix tree access
- Use ffs instead of fls when extracting data from a chip register in
the MIPS GIC irq driver
- Fix the unmasking of IPI interrupts in the MIPS GIC driver so they
end up at the target CPU and not at CPU0
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irq/generic-chip: Don't replace domain's name
irqdomain: Add __rcu annotations to radix tree accessors
irqchip/mips-gic: Use effective affinity to unmask
irqchip/mips-gic: Fix shifts to extract register fields
genirq: Check __free_irq() return value for NULL
Linus Torvalds [Sun, 1 Oct 2017 18:12:29 +0000 (11:12 -0700)]
Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Thomas Gleixner:
"Two small fixes for objtool:
- Support frame pointer setup via 'lea (%rsp), %rbp' which was not
yet supported and caused build warnings
- Disable unreacahble warnings for GCC4.4 and older to avoid false
positives caused by the compiler itself"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Support unoptimized frame pointer setup
objtool: Skip unreachable warnings for GCC 4.4 and older
The cma drivers use the drm_gem_framebuffer_helper functions now,
so remove drm_fb_cma_destroy, drm_fb_cma_create_handle,
drm_fb_cma_create_with_funcs, drm_fb_cma_create and
drm_fb_cma_prepare_fb.
Colin Ian King [Fri, 22 Sep 2017 16:05:16 +0000 (17:05 +0100)]
drm/tve200: make two functions static
The functions tve200_display_disable and tve200_display_funcs are
local to the source and do not need to be in global scope, so make
them static.
Cleans up sparse warnings:
symbol 'tve200_display_disable' was not declared. Should it be static?
symbol 'tve200_display_funcs' was not declared. Should it be static?
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Eight mostly minor fixes for recently discovered issues in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ILLEGAL REQUEST + ASC==27 => target failure
scsi: aacraid: Add a small delay after IOP reset
scsi: scsi_transport_fc: Also check for NOTPRESENT in fc_remote_port_add()
scsi: scsi_transport_fc: set scsi_target_id upon rescan
scsi: scsi_transport_iscsi: fix the issue that iscsi_if_rx doesn't parse nlmsg properly
scsi: aacraid: error: testing array offset 'bus' after use
scsi: lpfc: Don't return internal MBXERR_ERROR code from probe function
scsi: aacraid: Fix 2T+ drives on SmartIOC-2000