Heiner Kallweit [Mon, 28 Oct 2019 19:52:55 +0000 (20:52 +0100)]
net: phy: marvell: fix downshift function naming
I got access to the M88E1111 datasheet, and this PHY version uses
another register for downshift configuration. Therefore change prefix
to m88e1011, aligned with constants like MII_M1011_PHY_SCR.
Fixes: a3bdfce7bf9c ("net: phy: marvell: support downshift as PHY tunable") Reported-by: Chris Healy <Chris.Healy@zii.aero> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Mon, 28 Oct 2019 19:52:22 +0000 (20:52 +0100)]
net: phy: marvell: fix typo in constant MII_M1011_PHY_SRC_DOWNSHIFT_MASK
Fix typo and use PHY_SCR for PHY-specific Control Register.
Fixes: a3bdfce7bf9c ("net: phy: marvell: support downshift as PHY tunable") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sync the ABI description with the interface statistics that are currently
available through sysfs.
CC: Jarod Wilson <jarod@redhat.com> CC: Jonathan Corbet <corbet@lwn.net> CC: linux-doc@vger.kernel.org Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing [Mon, 28 Oct 2019 12:01:21 +0000 (12:01 +0000)]
ionic: Remove set but not used variable 'sg_desc'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/ethernet/pensando/ionic/ionic_txrx.c: In function 'ionic_rx_empty':
drivers/net/ethernet/pensando/ionic/ionic_txrx.c:405:28: warning:
variable 'sg_desc' set but not used [-Wunused-but-set-variable]
It is never used, so can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
Fix currenty ignored returned error by properly checking *err* after
calling aq_nic->aq_hw_ops->hw_ring_hwts_rx_fill().
Addresses-Coverity-ID: 1487357 ("Unused value") Fixes: 04a1839950d9 ("net: aquantia: implement data PTP datapath") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mao Wenan [Sat, 26 Oct 2019 02:21:39 +0000 (10:21 +0800)]
net: dsa: LAN9303: select REGMAP when LAN9303 enable
When NET_DSA_SMSC_LAN9303=y and NET_DSA_SMSC_LAN9303_MDIO=y,
below errors can be seen:
drivers/net/dsa/lan9303_mdio.c:87:23: error: REGMAP_ENDIAN_LITTLE
undeclared here (not in a function)
.reg_format_endian = REGMAP_ENDIAN_LITTLE,
drivers/net/dsa/lan9303_mdio.c:93:3: error: const struct regmap_config
has no member named reg_read
.reg_read = lan9303_mdio_read,
It should select REGMAP in config NET_DSA_SMSC_LAN9303.
Fixes: dc7005831523 ("net: dsa: LAN9303: add MDIO managed mode support") Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mao Wenan [Sat, 26 Oct 2019 02:07:38 +0000 (10:07 +0800)]
net: aquantia: make two symbols be static
When using ARCH=mips CROSS_COMPILE=mips-linux-gnu-
to build drivers/net/ethernet/aquantia/atlantic/aq_ptp.o
and drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.o,
below errors can be seen:
drivers/net/ethernet/aquantia/atlantic/aq_ptp.c:1378:6:
warning: symbol 'aq_ptp_poll_sync_work_cb' was not declared.
Should it be static?
drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c:1155:5:
warning: symbol 'hw_atl_b0_ts_to_sys_clock' was not declared.
Should it be static?
This patch to make aq_ptp_poll_sync_work_cb and hw_atl_b0_ts_to_sys_clock
be static to fix these warnings.
Fixes: 9c477032f7d0 ("net: aquantia: add support for PIN funcs") Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 29 Oct 2019 23:08:54 +0000 (16:08 -0700)]
Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
40GbE Intel Wired LAN Driver Updates 2019-10-25
This series contains updates to i40e only. Several are fixes that could
go to 'net', but were intended for 'net-next'.
Sylwia changes how the driver function to read the NVM module data, so
that it is able to read the LLDP agent configuration to allow for
persistent LLDP.
Jaroslaw resolves an issue where the incorrect FEC settings were being
displayed in ethtool, by setting the proper FEC bits.
Piotr moves the hardware flags detection into a separate function, so
that the specific flags can be set based on the MAC and NVM. Also
extends the PHY access function to include a command flag to let the
firmware know it should not change the page while accessing a OSFP module.
Updates the driver to display the driver and firmware version when in
recovery mode.
Aleksandr refactored the VF MAC filters accounting since an untrusted
VF was able to delete but not add a MAC filter, so refactor the code to
have more consistency and improved logging.
Nicholas updates the driver to use a default interval of 50 usecs,
instead of the current 100 usecs which was causing some regression
performance issues.
Damian resolved LED blinking issues for X710T*L devices by adding
specific flows for these devices in the LED operations.
Navid Emamdoost found where allocated memory is not being properly freed
upon a failure in setting up MAC VLANs, so added the missing kfree().
v2: Dropped patches 2 & 6 from the original series while we wait for the
author to respond to community feedback.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Fri, 25 Oct 2019 17:22:55 +0000 (18:22 +0100)]
net: fec: remove redundant assignment to pointer bdp
The pointer bdp is being assigned with a value that is never
read, so the assignment is redundant and hence can be removed.
Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 25 Oct 2019 18:48:53 +0000 (14:48 -0400)]
net: dsa: return directly from dsa_to_port
Return directly from within the loop as soon as the port is found,
otherwise we won't return NULL if the end of the list is reached.
Fixes: b96ddf254b09 ("net: dsa: use ports list in dsa_to_port") Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Fri, 25 Oct 2019 11:58:11 +0000 (12:58 +0100)]
net: aquantia: fix unintention integer overflow on left shift
Shifting the integer value 1 is evaluated using 32-bit
arithmetic and then used in an expression that expects a 64-bit
value, so there is potentially an integer overflow. Fix this
by using the BIT_ULL macro to perform the shift and avoid the
overflow.
Addresses-Coverity: ("Unintentional integer overflow") Fixes: 04a1839950d9 ("net: aquantia: implement data PTP datapath") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
There is a spelling mistake in a netdev_err error message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 24 Oct 2019 23:03:52 +0000 (01:03 +0200)]
net: dsa: mv88e6xxx: Add devlink param for ATU hash algorithm.
Some of the marvell switches have bits controlling the hash algorithm
the ATU uses for MAC addresses. In some industrial settings, where all
the devices are from the same manufacture, and hence use the same OUI,
the default hashing algorithm is not optimal. Allow the other
algorithms to be selected via devlink.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 24 Oct 2019 23:03:51 +0000 (01:03 +0200)]
net: dsa: Add support for devlink device parameters
Add plumbing to allow DSA drivers to register parameters with devlink.
To keep with the abstraction, the DSA drivers pass the ds structure to
these helpers, and the DSA core then translates that to the devlink
structure associated to the device.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 28 Oct 2019 20:58:20 +0000 (13:58 -0700)]
Merge branch 'net-dsa-b53-Add-support-for-MDB'
Florian Fainelli says:
====================
net: dsa: b53: Add support for MDB
This patch series adds support for programming multicast database
entries on b53 and bcm_sf2. This is extracted from a previously
submitted series that added managed mode support, but these patches are
usable in isolation. The larger series still needs to be reworked.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 24 Oct 2019 19:45:08 +0000 (12:45 -0700)]
net: dsa: bcm_sf2: Wire up MDB operations
Leverage the recently add b53_mdb_{add,del,prepare} functions since they
work as-is for bcm_sf2.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 24 Oct 2019 19:45:07 +0000 (12:45 -0700)]
net: dsa: b53: Add support for MDB
In preparation for supporting IGMP snooping with or without the use of
a bridge, add support within b53_common.c to program the ARL entries for
multicast operations. The key difference is that a multicast ARL entry
is comprised of a bitmask of enabled ports, instead of a port number.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 28 Oct 2019 20:44:26 +0000 (13:44 -0700)]
Merge branch 'mvpp2-improvements-in-rx-path'
Matteo Croce says:
====================
mvpp2 improvements in rx path
Refactor some code in the RX path to allow prefetching some data from the
packet header. The first patch is only a refactor, the second one
reduces the data synced, while the third one adds the prefetch.
The packet rate improvement with the second patch is very small (1606 => 1620 kpps),
while the prefetch bumps it up by 14%: 1620 => 1853 kpps.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Matteo Croce [Thu, 24 Oct 2019 17:24:57 +0000 (19:24 +0200)]
mvpp2: sync only the received frame
In the RX path we always sync against the maximum frame size for that pool.
Do the DMA sync and the unmap separately, so we can only sync by the
size of the received frame.
Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Fix misspellings of "disconnect", "disconnecting", "connections", and
"disconnected".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
net: Fix misspellings of "configure" and "configuration"
Fix various misspellings of "configuration" and "configure".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Vokáč [Thu, 24 Oct 2019 13:46:58 +0000 (15:46 +0200)]
net: dsa: qca8k: Initialize the switch with correct number of ports
Since commit 0394a63acfe2 ("net: dsa: enable and disable all ports")
the dsa core disables all unused ports of a switch. In this case
disabling ports with numbers higher than QCA8K_NUM_PORTS causes that
some switch registers are overwritten with incorrect content.
To fix this, initialize the dsa_switch->num_ports with correct number
of ports.
Fixes: 7e99e3470172 ("net: dsa: remove dsa_switch_alloc helper") Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Thu, 24 Oct 2019 10:32:18 +0000 (11:32 +0100)]
net: dsa: fix dereference on ds->dev before null check error
Currently ds->dev is dereferenced on the assignments of pdata and
np before ds->dev is null checked, hence there is a potential null
pointer dereference on ds->dev. Fix this by assigning pdata and
np after the ds->dev null pointer sanity check.
Addresses-Coverity: ("Dereference before null check") Fixes: 7e99e3470172 ("net: dsa: remove dsa_switch_alloc helper") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The following pull-request contains BPF updates for your *net-next* tree.
We've added 52 non-merge commits during the last 11 day(s) which contain
a total of 65 files changed, 2604 insertions(+), 1100 deletions(-).
The main changes are:
1) Revolutionize BPF tracing by using in-kernel BTF to type check BPF
assembly code. The work here teaches BPF verifier to recognize
kfree_skb()'s first argument as 'struct sk_buff *' in tracepoints
such that verifier allows direct use of bpf_skb_event_output() helper
used in tc BPF et al (w/o probing memory access) that dumps skb data
into perf ring buffer. Also add direct loads to probe memory in order
to speed up/replace bpf_probe_read() calls, from Alexei Starovoitov.
2) Big batch of changes to improve libbpf and BPF kselftests. Besides
others: generalization of libbpf's CO-RE relocation support to now
also include field existence relocations, revamp the BPF kselftest
Makefile to add test runner concept allowing to exercise various
ways to build BPF programs, and teach bpf_object__open() and friends
to automatically derive BPF program type/expected attach type from
section names to ease their use, from Andrii Nakryiko.
3) Fix deadlock in stackmap's build-id lookup on rq_lock(), from Song Liu.
4) Allow to read BTF as raw data from bpftool. Most notable use case
is to dump /sys/kernel/btf/vmlinux through this, from Jiri Olsa.
5) Use bpf_redirect_map() helper in libbpf's AF_XDP helper prog which
manages to improve "rx_drop" performance by ~4%., from Björn Töpel.
6) Fix to restore the flow dissector after reattach BPF test and also
fix error handling in bpf_helper_defs.h generation, from Jakub Sitnicki.
7) Improve verifier's BTF ctx access for use outside of raw_tp, from
Martin KaFai Lau.
8) Improve documentation for AF_XDP with new sections and to reflect
latest features, from Magnus Karlsson.
9) Add back 'version' section parsing to libbpf for old kernels, from
John Fastabend.
10) Fix strncat bounds error in libbpf's libbpf_prog_type_by_name(),
from KP Singh.
11) Turn on -mattr=+alu32 in LLVM by default for BPF kselftests in order
to improve insn coverage for built BPF progs, from Yonghong Song.
12) Misc minor cleanups and fixes, from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Here are two sparse warnings, third patch is a fix for
scaled_ppm_to_ppb missing. Eventually I reworked this
to exclude ptp module from build. Please consider it instead
of this patch: https://patchwork.ozlabs.org/patch/1184171/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Sat, 26 Oct 2019 11:05:34 +0000 (11:05 +0000)]
net: aquantia: disable ptp object build if no config
We do disable aq_ptp module build using inline
stubs when CONFIG_PTP_1588_CLOCK is not declared.
This reduces module size and removes unnecessary code.
Reported-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Sat, 26 Oct 2019 11:05:33 +0000 (11:05 +0000)]
net: aquantia: fix warnings on endianness
fixes to remove sparse warnings:
sparse: sparse: cast to restricted __be64
Fixes: 04a1839950d9 ("net: aquantia: implement data PTP datapath") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Sat, 26 Oct 2019 11:05:31 +0000 (11:05 +0000)]
net: aquantia: fix var initialization warning
found by sparse, simply useless local initialization with zero.
Fixes: 94ad94558b0f ("net: aquantia: add PTP rings infrastructure") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
netfilter: nf_tables_offload: unbind if multi-device binding fails
nft_flow_block_chain() needs to unbind in case of error when performing
the multi-device binding.
Fixes: d54725cd11a5 ("netfilter: nf_tables: support for multiple devices per netdev hook") Reported-by: wenxu <wenxu@ucloud.cn> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
1. a conntrack entry is about to be confirmed (added to hash table).
2. a clash with existing entry is detected.
3. nf_ct_resolve_clash() puts skb->nfct (the "losing" entry).
4. this entry now has a refcount of 0 and is freed to SLAB_TYPESAFE_BY_RCU
kmem cache.
skb->nfct has been replaced by the one found in the hash.
Problem is that nf_conntrack_confirm() uses the old ct:
static inline int nf_conntrack_confirm(struct sk_buff *skb)
{
struct nf_conn *ct = (struct nf_conn *)skb_nfct(skb);
int ret = NF_ACCEPT;
if (ct) {
if (!nf_ct_is_confirmed(ct))
ret = __nf_conntrack_confirm(skb);
if (likely(ret == NF_ACCEPT))
nf_ct_deliver_cached_events(ct); /* This ct has refcount 0! */
}
return ret;
}
As of "netfilter: conntrack: free extension area immediately", we can't
access conntrack extensions in this case.
To fix this, make sure we check the dying bit presence before attempting
to get the eache extension.
Reported-by: syzbot+c7aabc9fe93e7f3637ba@syzkaller.appspotmail.com Fixes: 2ad9d7747c10d1 ("netfilter: conntrack: free extension area immediately") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
David S. Miller [Sat, 26 Oct 2019 03:52:36 +0000 (20:52 -0700)]
Merge branch 'ionic-updates'
Shannon Nelson says:
====================
ionic updates
These are a few of the driver updates we've been working on internally.
These clean up a few mismatched struct comments, add checking for dead
firmware, fix an initialization bug, and change the Rx buffer management.
Shannon Nelson [Thu, 24 Oct 2019 00:48:59 +0000 (17:48 -0700)]
ionic: implement support for rx sgl
Even out Rx performance across MTU sizes by changing from full
skb allocations to page-based frag allocations. The device
supports a form of scatter-gather in the Rx path, so we can
set up a number of pages for each descriptor, all of which are
easier to alloc and pass around than the standard kzalloc'd
buffer. An skb is wrapped around the pages while processing
the received packets, and pages are recycled as needed, or
left alone if they weren't used in the Rx.
Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Thu, 24 Oct 2019 00:48:57 +0000 (17:48 -0700)]
ionic: add heartbeat check
Most of our firmware has a heartbeat feature that the driver
can watch for to see if the FW is still alive and likely to
answer a dev_cmd or AdminQ request.
Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Thu, 24 Oct 2019 00:48:56 +0000 (17:48 -0700)]
ionic: reverse an interrupt coalesce calculation
Fix the initial interrupt coalesce usec-to-hw setting
to actually be usec-to-hw.
Fixes: 780eded34ccc ("ionic: report users coalesce request") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Wed, 23 Oct 2019 19:36:14 +0000 (21:36 +0200)]
r8169: improve rtl8169_rx_fill
We have only one user of the error path, so we can inline it.
In addition the call to rtl8169_make_unusable_by_asic() can be removed
because rtl8169_alloc_rx_data() didn't call rtl8169_mark_to_asic() yet
for the respective index if returning NULL.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Wed, 23 Oct 2019 19:09:34 +0000 (21:09 +0200)]
r8169: align fix_features callback with vendor driver
This patch aligns the fix_features callback with the vendor driver and
also disables IPv6 HW checksumming and TSO if jumbo packets are used
on RTL8101/RTL8168/RTL8125.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Here's the main bluetooth-next pull request for the 5.5 kernel:
- Multiple fixes to hci_qca driver
- Fix for HCI_USER_CHANNEL initialization
- btwlink: drop superseded driver
- Add support for Intel FW download error recovery
- Various other smaller fixes & improvements
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Baron [Wed, 23 Oct 2019 15:09:26 +0000 (11:09 -0400)]
tcp: add TCP_INFO status for failed client TFO
The TCPI_OPT_SYN_DATA bit as part of tcpi_options currently reports whether
or not data-in-SYN was ack'd on both the client and server side. We'd like
to gather more information on the client-side in the failure case in order
to indicate the reason for the failure. This can be useful for not only
debugging TFO, but also for creating TFO socket policies. For example, if
a middle box removes the TFO option or drops a data-in-SYN, we can
can detect this case, and turn off TFO for these connections saving the
extra retransmits.
The newly added tcpi_fastopen_client_fail status is 2 bits and has the
following 4 states:
1) TFO_STATUS_UNSPEC
Catch-all state which includes when TFO is disabled via black hole
detection, which is indicated via LINUX_MIB_TCPFASTOPENBLACKHOLE.
2) TFO_COOKIE_UNAVAILABLE
If TFO_CLIENT_NO_COOKIE mode is off, this state indicates that no cookie
is available in the cache.
3) TFO_DATA_NOT_ACKED
Data was sent with SYN, we received a SYN/ACK but it did not cover the data
portion. Cookie is not accepted by server because the cookie may be invalid
or the server may be overloaded.
4) TFO_SYN_RETRANSMITTED
Data was sent with SYN, we received a SYN/ACK which did not cover the data
after at least 1 additional SYN was sent (without data). It may be the case
that a middle-box is dropping data-in-SYN packets. Thus, it would be more
efficient to not use TFO on this connection to avoid extra retransmits
during connection establishment.
These new fields do not cover all the cases where TFO may fail, but other
failures, such as SYN/ACK + data being dropped, will result in the
connection not becoming established. And a connection blackhole after
session establishment shows up as a stalled connection.
Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Christoph Paasch <cpaasch@apple.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Move DT parsing code to probe dp83867_probe() as it's one time operation.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The link detection timeouts can be observed (or link might not be detected
at all) when dp83867 PHY is configured in manual mode (speed/duplex).
CFG3[9] Robust Auto-MDIX option allows to significantly improve link detection
in case dp83867 is configured in manual mode and reduce link detection
time.
As per DM: "If link partners are configured to operational modes that are
not supported by normal Auto MDI/MDIX mode (like Auto-Neg versus Force
100Base-TX or Force 100Base-TX versus Force 100Base-TX), this Robust Auto
MDI/MDIX mode allows MDI/MDIX resolution and prevents deadlock."
Hence, enable this option by default as there are no known reasons
not to do so.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vincent Prince [Wed, 23 Oct 2019 13:44:20 +0000 (15:44 +0200)]
net: sch_generic: Use pfifo_fast as fallback scheduler for CAN hardware
There is networking hardware that isn't based on Ethernet for layers 1 and 2.
For example CAN.
CAN is a multi-master serial bus standard for connecting Electronic Control
Units [ECUs] also known as nodes. A frame on the CAN bus carries up to 8 bytes
of payload. Frame corruption is detected by a CRC. However frame loss due to
corruption is possible, but a quite unusual phenomenon.
While fq_codel works great for TCP/IP, it doesn't for CAN. There are a lot of
legacy protocols on top of CAN, which are not build with flow control or high
CAN frame drop rates in mind.
When using fq_codel, as soon as the queue reaches a certain delay based length,
skbs from the head of the queue are silently dropped. Silently meaning that the
user space using a send() or similar syscall doesn't get an error. However
TCP's flow control algorithm will detect dropped packages and adjust the
bandwidth accordingly.
When using fq_codel and sending raw frames over CAN, which is the common use
case, the user space thinks the package has been sent without problems, because
send() returned without an error. pfifo_fast will drop skbs, if the queue
length exceeds the maximum. But with this scheduler the skbs at the tail are
dropped, an error (-ENOBUFS) is propagated to user space. So that the user
space can slow down the package generation.
On distributions, where fq_codel is made default via CONFIG_DEFAULT_NET_SCH
during compile time, or set default during runtime with sysctl
net.core.default_qdisc (see [1]), we get a bad user experience. In my test case
with pfifo_fast, I can transfer thousands of million CAN frames without a frame
drop. On the other hand with fq_codel there is more then one lost CAN frame per
thousand frames.
As pointed out fq_codel is not suited for CAN hardware, so this patch changes
attach_one_default_qdisc() to use pfifo_fast for "ARPHRD_CAN" network devices.
During transition of a netdev from down to up state the default queuing
discipline is attached by attach_default_qdiscs() with the help of
attach_one_default_qdisc(). This patch modifies attach_one_default_qdisc() to
attach the pfifo_fast (pfifo_fast_ops) if the network device type is
"ARPHRD_CAN".
Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Vincent Prince <vincent.prince.fr@gmail.com> Acked-by: Dave Taht <dave.taht@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hayes Wang [Wed, 23 Oct 2019 13:24:44 +0000 (21:24 +0800)]
r8152: check the pointer rtl_fw->fw before using it
Fix the pointer rtl_fw->fw would be used before checking in
rtl8152_apply_firmware() that causes the following kernel oops.
Unable to handle kernel NULL pointer dereference at virtual address 00000002
pgd = (ptrval)
[00000002] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 131 Comm: kworker/0:2 Not tainted 5.4.0-rc1-00539-g9370f2d05a2a #6788
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
Workqueue: events_long rtl_hw_phy_work_func_t
PC is at rtl8152_apply_firmware+0x14/0x464
LR is at r8153_hw_phy_cfg+0x24/0x17c
pc : [<c064f4e4>] lr : [<c064fa18>] psr: a0000013
sp : e75c9e60 ip : 60000013 fp : c11b7614
r10: e883b91c r9 : 00000000 r8 : fffffffe
r7 : e883b640 r6 : fffffffe r5 : fffffffe r4 : e883b640
r3 : 736cfe7c r2 : 736cfe7c r1 : 000052f8 r0 : e883b640
Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 10c5387d Table: 6640006a DAC: 00000051
Process kworker/0:2 (pid: 131, stack limit = 0x(ptrval))
Stack: (0xe75c9e60 to 0xe75ca000)
...
[<c064f4e4>] (rtl8152_apply_firmware) from [<c064fa18>]
(r8153_hw_phy_cfg+0x24/0x17c)
[<c064fa18>] (r8153_hw_phy_cfg) from [<c064e784>]
(rtl_hw_phy_work_func_t+0x220/0x3e4)
[<c064e784>] (rtl_hw_phy_work_func_t) from [<c0148a74>]
(process_one_work+0x22c/0x7c8)
[<c0148a74>] (process_one_work) from [<c0149054>] (worker_thread+0x44/0x520)
[<c0149054>] (worker_thread) from [<c0150548>] (kthread+0x130/0x164)
[<c0150548>] (kthread) from [<c01010b4>] (ret_from_fork+0x14/0x20)
Exception stack(0xe75c9fb0 to 0xe75c9ff8)
...
Fixes: 9370f2d05a2a ("r8152: support request_firmware for RTL8153") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
i40e: Refactoring VF MAC filters counting to make more reliable
This patch prepares ground for the next VF MAC address change fix.
It lets untrusted VF to delete any VF mac filter, but it still
doesn't let untrusted VF to add mac filter not setup by PF.
It removes information duplication in num_mac mac filters counter.
And improves exact h/w mac filters usage checking in the
i40e_check_vf_permission() function by counting mac2add_cnt.
It also improves logging because now all mac addresses will be validated
first and corresponding messages will be logged.
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
i40e: allow ethtool to report SW and FW versions in recovery mode
Let ethtool print driver and firmware versions when NIC is in
recovery mode. Assign i40e_get_drvinfo() operation to ethtool
recovery mode operations. Previously ethtool did not report
driver and firmware versions when NIC was in recovery mode.
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Nicholas Nunley [Fri, 20 Sep 2019 09:17:21 +0000 (02:17 -0700)]
i40e: initialize ITRN registers with correct values
Since commit 92418fb14750 ("i40e/i40evf: Use usec value instead of reg
value for ITR defines") the driver tracks the interrupt throttling
intervals in single usec units, although the actual ITRN/ITR0 registers are
programmed in 2 usec units. Most register programming flows in the driver
correctly handle the conversion, although it is currently not applied when
the registers are initialized to their default values. Most of the time
this doesn't present a problem since the default values are usually
immediately overwritten through the standard adaptive throttling mechanism,
or updated manually by the user, but if adaptive throttling is disabled and
the interval values are left alone then the incorrect value will persist.
Since the intended default interval of 50 usecs (vs. 100 usecs as
programmed) performs better for most traffic workloads, this can lead to
performance regressions.
This patch adds the correct conversion when writing the initial values to
the ITRN registers.
Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Piotr Azarewicz [Fri, 20 Sep 2019 09:17:19 +0000 (02:17 -0700)]
i40e: Extend PHY access with page change flag
Currently FW use MDIO I/F number corresponded with current PF for PHY
access. This code allow to specify used MDIO I/F number.
Add new field - command flags with only one flag for now. Added flag
tells FW that it shouldn't change page while accessing QSFP module, as
it was set manually.
Signed-off-by: Piotr Azarewicz <piotr.azarewicz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Piotr Azarewicz [Fri, 20 Sep 2019 09:17:18 +0000 (02:17 -0700)]
i40e: Extract detection of HW flags into a function
Move code detecting HW flags based on device type and FW API version
into a single function.
Signed-off-by: Piotr Azarewicz <piotr.azarewicz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
i40e: Wrong 'Advertised FEC modes' after set FEC to AUTO
Fix display of parameters "Configured FEC encodings:" and "Advertised
FEC modes:" in ethtool. Implemented by setting proper FEC bits in
“advertising” bitmask of link_modes struct and “fec” bitmask in
ethtool_fecparam struct. Without this patch wrong FEC settings
can be shown.
Signed-off-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Martin KaFai Lau [Fri, 25 Oct 2019 00:18:11 +0000 (17:18 -0700)]
bpf: Prepare btf_ctx_access for non raw_tp use case
This patch makes a few changes to btf_ctx_access() to prepare
it for non raw_tp use case where the attach_btf_id is not
necessary a BTF_KIND_TYPEDEF.
It moves the "btf_trace_" prefix check and typedef-follow logic to a new
function "check_attach_btf_id()" which is called only once during
bpf_check(). btf_ctx_access() only operates on a BTF_KIND_FUNC_PROTO
type now. That should also be more efficient since it is done only
one instead of every-time check_ctx_access() is called.
"check_attach_btf_id()" needs to find the func_proto type from
the attach_btf_id. It needs to store the result into the
newly added prog->aux->attach_func_proto. func_proto
btf type has no name, so a proper name should be stored into
"attach_func_name" also.
v2:
- Move the "btf_trace_" check to an earlier verifier phase (Alexei)
David S. Miller [Thu, 24 Oct 2019 22:21:58 +0000 (15:21 -0700)]
Merge branch 'DPAA-Ethernet-changes'
Madalin Bucur says:
====================
DPAA Ethernet changes
v3: add newline at the end of error messages
v2: resending with From: field matching signed-off-by
Here's a series of changes for the DPAA Ethernet, addressing minor
or unapparent issues in the codebase, adding probe ordering based on
a recently added DPAA QMan API, removing some redundant code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Madalin Bucur [Wed, 23 Oct 2019 09:08:45 +0000 (12:08 +0300)]
fsl/fman: remove unused struct member
Remove unused struct member second_largest_buf_size. Also, an out of
bounds access would have occurred in the removed code if there was only
one buffer pool in use.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Madalin Bucur [Wed, 23 Oct 2019 09:08:44 +0000 (12:08 +0300)]
dpaa_eth: change DMA device
The DPAA Ethernet driver is using the FMan MAC as the device for DMA
mapping. This is not actually correct, as the real DMA device is the
FMan port (the FMan Rx port for reception and the FMan Tx port for
transmission). Changing the device used for DMA mapping to the Fman
Rx and Tx port devices.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Laurentiu Tudor [Wed, 23 Oct 2019 09:08:43 +0000 (12:08 +0300)]
fsl/fman: add API to get the device behind a fman port
Add an API that retrieves the 'struct device' that the specified FMan
port probed against. The new API will be used in a subsequent patch
that corrects the DMA devices used by the dpaa_eth driver.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Laurentiu Tudor [Wed, 23 Oct 2019 09:08:41 +0000 (12:08 +0300)]
dpaa_eth: defer probing after qbman
If the DPAA 1 Ethernet driver gets probed before the QBMan driver it will
cause a boot crash. Add predictability in the probing order by deferring
the Ethernet driver probe after QBMan and portals by using the recently
introduced QBMan APIs.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Laurentiu Tudor [Wed, 23 Oct 2019 09:08:40 +0000 (12:08 +0300)]
fsl/fman: don't touch liodn base regs reserved on non-PAMU SoCs
The liodn base registers are specific to PAMU based NXP systems and are
reserved on SMMU based ones. Don't access them unless PAMU is compiled in.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
net: aquantia: PTP support for AQC devices
This patchset introduces PTP feature support in Aquantia AQC atlantic driver.
This implementation is a joined effort of aquantia developers:
Egor is the main designer and driver/firmware architect on PTP,
Sergey and Dmitry are included as co-developers.
Dmitry also helped me in the overall patchset preparations.
Feature was verified on AQC hardware with testptp tool, linuxptp,
gptp and with Motu hardware unit.
version3 updates:
- Review comments applied: error handling, various fixes
version2 updates:
- Fixing issues from Andrew's review: replacing self with
ptp var name, making ptp_clk_offset a field in the ptp instance.
devm_kzalloc advice is actually non applicable, because ptp object gets
created/destroyed on each network device close/open and it should not be
linked with dev lifecycle.
- Rearranging commit authorship, adding Egor as a ptp module main maintainer
- Fixing kbuild 32bit division issues
====================
Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Tue, 22 Oct 2019 09:53:49 +0000 (09:53 +0000)]
net: aquantia: adding atlantic ptp maintainer
PTP implementation is designed and maintained by Egor Pomozov, adding
him as this module maintainer. Egor is the author of the core
functionality and the architect, and is to be contacted for
all Aquantia PTP/AVB functionality.
Signed-off-by: Egor Pomozov <epomozov@marvell.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Bezrukov [Tue, 22 Oct 2019 09:53:47 +0000 (09:53 +0000)]
net: aquantia: add support for PIN funcs
Depending on FW configuration we can manage from 0 to 3 PINs for periodic output
and from 0 to 1 ext ts PIN for getting TS for external event.
Ext TS PIN functionality is implemented via periodic timestamps polling
directly from PHY, because right now there is now way to receive the
PIN trigger interrupt from phy.
The polling interval is 15 milliseconds.
Co-developed-by: Egor Pomozov <epomozov@marvell.com> Signed-off-by: Egor Pomozov <epomozov@marvell.com> Co-developed-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Bezrukov [Tue, 22 Oct 2019 09:53:45 +0000 (09:53 +0000)]
net: aquantia: add support for Phy access
GPIO PIN control and access is done by direct phy manipulation.
Here we add an aq_phy module which is able to access phy registers
via MDIO access mailbox.
Access is controlled via HW semaphore.
Co-developed-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Bezrukov [Tue, 22 Oct 2019 09:53:38 +0000 (09:53 +0000)]
net: aquantia: rx filters for ptp
We implement HW filter reservation for PTP traffic. Special location
in filters table is marked as reserved, because incoming ptp traffic
should be directed only to PTP designated queue. This way HW will do PTP
timestamping and proper processing.
Co-developed-by: Egor Pomozov <epomozov@marvell.com> Signed-off-by: Egor Pomozov <epomozov@marvell.com> Co-developed-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Signed-off-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Bezrukov [Tue, 22 Oct 2019 09:53:32 +0000 (09:53 +0000)]
net: aquantia: styling fixes on ptp related functions
Checkpatch and styling fixes on parts of code touched by ptp
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Egor Pomozov [Tue, 22 Oct 2019 09:53:27 +0000 (09:53 +0000)]
net: aquantia: add basic ptp_clock callbacks
Basic HW functions implemented for adjusting frequency,
adjusting time, getting and setting time.
With these callbacks we now do register ptp clock in the system.
Firmware interface parts are defined for PTP requests and interactions.
Enable/disable PTP counters in HW on clock register/unregister.
Signed-off-by: Egor Pomozov <epomozov@marvell.com> Co-developed-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Signed-off-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Co-developed-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Bezrukov [Tue, 22 Oct 2019 09:53:25 +0000 (09:53 +0000)]
net: aquantia: unify styling of bit enums
Make some other bit-enums more clear about positioning,
this helps on debugging and development
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Egor Pomozov [Tue, 22 Oct 2019 09:53:22 +0000 (09:53 +0000)]
net: aquantia: PTP skeleton declarations and callbacks
Here we add basic function for PTP clock register/unregister.
We also declare FW/HW capability bits used to control PTP feature on device.
PTP device is created if network card has appropriate FW that has PTP
enabled in config. HW supports timestamping for PTPv2 802.AS1 and
PTPv2 IPv4 UDP packets.
It also supports basic PTP callbacks for getting/setting time, adjusting
frequency and time as well.
Signed-off-by: Egor Pomozov <epomozov@marvell.com> Co-developed-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Signed-off-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Co-developed-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
mlxsw: Update main pool computation and pool size limits
Petr says:
In Spectrum ASICs, the shared buffer is an area of memory where packets are
kept until they can be transmitted. There are two resources associated with
shared buffer size: cap_total_buffer_size and cap_guaranteed_shared_buffer.
So far, mlxsw has been using the former as a limit when validating shared
buffer pool size configuration. However, the total size also includes
headrooms and reserved space, which really cannot be used for shared buffer
pools. Patch #1 mends this and has mlxsw use the guaranteed size.
To configure default pool sizes, mlxsw has historically hard-coded one or
two smallish pools, and one "main" pool that took most of the shared buffer
(that would be pool 0 on ingress and pool 4 on egress). During the
development of Spectrum-2, it became clear that the shared buffer size
keeps shrinking as bugs are identified and worked around. In order to
prevent having to tweak the size of pools 0 and 4 to catch up with updates
to values reported by the FW, patch #2 changes the way these pools are set.
Instead of hard-coding a fixed value, the main pool now takes whatever is
left from the guaranteed size after the smaller pool(s) are taken into
account.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Wed, 23 Oct 2019 06:05:00 +0000 (09:05 +0300)]
mlxsw: spectrum_buffers: Calculate the size of the main pool
Instead of hard-coding the size of the largest pool, calculate it from the
reported guaranteed shared buffer size and sizes of other pools (currently
only the CPU port pool).
Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Wed, 23 Oct 2019 06:04:59 +0000 (09:04 +0300)]
mlxsw: spectrum: Use guaranteed buffer size as pool size limit
There are two resources associated with shared buffer size:
cap_total_buffer_size, and cap_guaranteed_shared_buffer. So far, mlxsw has
been using the former as a limit to determine how large a pool size is
allowed to be. However, the total size also includes headrooms and reserved
space, which really cannot be used for shared buffer pools.
Therefore convert mlxsw to use the latter resource as a limit. Adjust
hard-coded pool sizes to be the guaranteed size minus 256000 bytes for CPU
port pool. On Spectrum-1 that actually leads to an increase. A follow-up
patch will have this size calculated automatically.
Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Tue, 22 Oct 2019 19:30:57 +0000 (21:30 +0200)]
r8169: never set PCI_EXP_DEVCTL_NOSNOOP_EN
Setting PCI_EXP_DEVCTL_NOSNOOP_EN for certain chip versions had been
added to the vendor driver more than 10 years ago, and copied from
there to r8169. It has been removed from the vendor driver meanwhile
and I think we can safely remove this too.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / mirror_ubuntu-kernels.git / log