Add brcm,nand-ecc-use-strap to get ecc and spare area size settings from
board boot strap for broadband board designs because they do not specify
ecc setting in dts but rather using the strap setting.
the preferred way in the kernel is to use the struct_size() helper to
do the arithmetic instead of the argument "size + count * size" in the
devm_kzalloc() function.
Ezra Buehler [Thu, 25 Jan 2024 20:01:08 +0000 (22:01 +0200)]
mtd: spinand: esmt: Extend IDs to 5 bytes
According to the datasheets, the ESMT chips in question will return a 5
byte long identification code where the last 3 bytes are the JEDEC
continuation codes (7Fh). Although, I would have expected 4 continuation
codes as Powerchip Semiconductor (C8h, corresponding to the parameter
page data) is located in bank 5 of the JEDEC database.
By matching the full 5 bytes we can avoid clashes with GigaDevice NAND
flashes.
This fix allows the MT7688-based GARDENA smart Gateway to boot again.
Fixes: aa08bf187f32 ("mtd: spinand: esmt: add support for F50D2G41KA") Signed-off-by: Ezra Buehler <ezra.buehler@husqvarnagroup.com> Reviewed-by: Martin Kurbanov <mmkurbanov@salutedevices.com> Tested-by: Martin Kurbanov <mmkurbanov@salutedevices.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240125200108.24374-3-ezra@easyb.ch
Ezra Buehler [Thu, 25 Jan 2024 20:01:07 +0000 (22:01 +0200)]
mtd: spinand: Add support for 5-byte IDs
E.g. ESMT chips will return an identification code with a length of 5
bytes. In order to prevent ambiguity, flash chips would actually need to
return IDs that are up to 17 or more bytes long due to JEDEC's
continuation scheme. I understand that if a manufacturer ID is located
in bank N of JEDEC's database (there are currently 16 banks), N - 1
continuation codes (7Fh) need to be added to the identification code
(comprising of manufacturer ID and device ID). However, most flash chip
manufacturers don't seem to implement this (correctly).
Signed-off-by: Ezra Buehler <ezra.buehler@husqvarnagroup.com> Reviewed-by: Martin Kurbanov <mmkurbanov@salutedevices.com> Tested-by: Martin Kurbanov <mmkurbanov@salutedevices.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240125200108.24374-2-ezra@easyb.ch
Uwe Kleine-König [Mon, 15 Jan 2024 14:12:46 +0000 (15:12 +0100)]
mtd: rawnand: fsl_elbc: Let .probe retry if local bus is missing
If during probe fsl_lbc_ctrl_dev is NULL that might just be because the
fsl_lbc driver didn't bind yet. So return -EPROBE_DEFER in this case to
make the driver core retry probing later.
Linus Torvalds [Sun, 21 Jan 2024 22:01:12 +0000 (14:01 -0800)]
Merge tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs
Pull more bcachefs updates from Kent Overstreet:
"Some fixes, Some refactoring, some minor features:
- Assorted prep work for disk space accounting rewrite
- BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
makes our trigger context more explicit
- A few fixes to avoid excessive transaction restarts on
multithreaded workloads: fstests (in addition to ktest tests) are
now checking slowpath counters, and that's shaking out a few bugs
- Assorted tracepoint improvements
- Starting to break up bcachefs_format.h and move on disk types so
they're with the code they belong to; this will make room to start
documenting the on disk format better.
- A few minor fixes"
* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
bcachefs: Improve inode_to_text()
bcachefs: logged_ops_format.h
bcachefs: reflink_format.h
bcachefs; extents_format.h
bcachefs: ec_format.h
bcachefs: subvolume_format.h
bcachefs: snapshot_format.h
bcachefs: alloc_background_format.h
bcachefs: xattr_format.h
bcachefs: dirent_format.h
bcachefs: inode_format.h
bcachefs; quota_format.h
bcachefs: sb-counters_format.h
bcachefs: counters.c -> sb-counters.c
bcachefs: comment bch_subvolume
bcachefs: bch_snapshot::btime
bcachefs: add missing __GFP_NOWARN
bcachefs: opts->compression can now also be applied in the background
bcachefs: Prep work for variable size btree node buffers
bcachefs: grab s_umount only if snapshotting
...
Linus Torvalds [Sun, 21 Jan 2024 19:14:40 +0000 (11:14 -0800)]
Merge tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for time and clocksources:
- A fix for the idle and iowait time accounting vs CPU hotplug.
The time is reset on CPU hotplug which makes the accumulated
systemwide time jump backwards.
- Assorted fixes and improvements for clocksource/event drivers"
* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
clocksource/drivers/ep93xx: Fix error handling during probe
clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
clocksource/timer-riscv: Add riscv_clock_shutdown callback
dt-bindings: timer: Add StarFive JH8100 clint
dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs
Kent Overstreet [Tue, 16 Jan 2024 21:20:21 +0000 (16:20 -0500)]
bcachefs: opts->compression can now also be applied in the background
The "apply this compression method in the background" paths now use the
compression option if background_compression is not set; this means that
setting or changing the compression option will cause existing data to
be compressed accordingly in the background.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Tue, 16 Jan 2024 18:29:59 +0000 (13:29 -0500)]
bcachefs: Prep work for variable size btree node buffers
bcachefs btree nodes are big - typically 256k - and btree roots are
pinned in memory. As we're now up to 18 btrees, we now have significant
memory overhead in mostly empty btree roots.
And in the future we're going to start enforcing that certain btree node
boundaries exist, to solve lock contention issues - analagous to XFS's
AGIs.
Thus, we need to start allocating smaller btree node buffers when we
can. This patch changes code that refers to the filesystem constant
c->opts.btree_node_size to refer to the btree node buffer size -
btree_buf_bytes() - where appropriate.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In __bch2_ioctl_subvolume_create(), we grab s_umount unconditionally
and unlock it at the end of the function. There is a comment
"why do we need this lock?" about the lock coming from
commit 42d237320e98 ("bcachefs: Snapshot creation, deletion")
The reason is that __bch2_ioctl_subvolume_create() calls
sync_inodes_sb() which enforce locked s_umount to writeback all dirty
nodes before doing snapshot works.
Fix it by read locking s_umount for snapshotting only and unlocking
s_umount after sync_inodes_sb().
Signed-off-by: Su Yue <glass.su@suse.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Colin Ian King [Tue, 16 Jan 2024 11:07:23 +0000 (11:07 +0000)]
bcachefs: remove redundant variable tmp
The variable tmp is being assigned a value but it isn't being
read afterwards. The assignment is redundant and so tmp can be
removed.
Cleans up clang scan build warning:
warning: Although the value stored to 'ret' is used in the enclosing
expression, the value is never actually read from 'ret'
[deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Tue, 16 Jan 2024 01:37:23 +0000 (20:37 -0500)]
bcachefs: Fix excess transaction restarts in __bchfs_fallocate()
drop_locks_do() should not be used in a fastpath without first trying
the do in nonblocking mode - the unlock and relock will cause excessive
transaction restarts and potentially livelocking with other threads that
are contending for the same locks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Mon, 15 Jan 2024 22:59:51 +0000 (17:59 -0500)]
bcachefs: Better journal tracepoints
Factor out bch2_journal_bufs_to_text(), and use it in the
journal_entry_full() tracepoint; when we can't get a journal reservation
we need to know the outstanding journal entry sizes to know if the
problem is due to excessive flushing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Mon, 15 Jan 2024 22:56:22 +0000 (17:56 -0500)]
bcachefs: Avoid flushing the journal in the discard path
When issuing discards, we may need to flush the journal if there's too
many buckets that can't be discarded until a journal flush.
But the heuristic was bad; we should be comparing the number of buckets
that need to flushes against the number of free buckets, not the number
of buckets we saw.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Mon, 15 Jan 2024 19:15:26 +0000 (14:15 -0500)]
bcachefs: bch2_kthread_io_clock_wait() no longer sleeps until full amount
Drop t he loop in bch2_kthread_io_clock_wait(): this allows the code
that uses it to be woken up for other reasons, and fixes a bug where
rebalance wouldn't wake up when a scan was requested.
This raises the possibility of spurious wakeups, but callers should
always be able to handle that reasonably well.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Thu, 11 Jan 2024 04:47:04 +0000 (23:47 -0500)]
bcachefs: Reduce would_deadlock restarts
We don't have to take locks in any particular ordering - we'll make
forward progress just fine - but if we try to stick to an ordering, it
can help to avoid excessive would_deadlock transaction restarts.
This tweaks the reflink path to take extents btree locks in the right
order.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Thu, 11 Jan 2024 04:08:30 +0000 (23:08 -0500)]
bcachefs: Don't log errors if BCH_WRITE_ALLOC_NOWAIT
Previously, we added logging in the write path to ensure that any
unexpected errors getting reported to userspace have a log message; but
BCH_WRITE_ALLOC_NOWAIT is a special case, it's used for promotes where
errors are expected and not reported out to userspace - so we need to
silence those.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- retry (reconnect) improvement including new retrans mount parm, and
handling of two additional return codes that need to be retried on
- two minor cleanup patches and another to remove duplicate query
info code
- two documentation cleanup, and one reviewer email correction"
* tag 'v6.8-rc-part2-smb-client' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update iface_last_update on each query-and-update
cifs: handle servers that still advertise multichannel after disabling
cifs: new mount option called retrans
cifs: reschedule periodic query for server interfaces
smb: client: don't clobber ->i_rdev from cached reparse points
smb: client: get rid of smb311_posix_query_path_info()
smb: client: parse owner/group when creating reparse points
smb: client: fix parsing of SMB3.1.1 POSIX create context
cifs: update known bugs mentioned in kernel docs for cifs
cifs: new nt status codes from MS-SMB2
cifs: pick channel for tcon and tdis
cifs: open_cached_dir should not rely on primary channel
smb3: minor documentation updates
Update MAINTAINERS email address
cifs: minor comment cleanup
smb3: show beginning time for per share stats
cifs: remove redundant variable tcon_exist
Linus Torvalds [Sat, 20 Jan 2024 23:03:25 +0000 (15:03 -0800)]
Merge tag 'dmaengine-fix-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New support:
- Loongson LS2X APB DMA controller
- sf-pdma: mpfs-pdma support
- Qualcomm X1E80100 GPI dma controller support
Updates:
- Xilinx XDMA updates to support interleaved DMA transfers
- TI PSIL threads for AM62P and J722S and cfg register regions
description
- axi-dmac Improving the cyclic DMA transfers
- Tegra Support dma-channel-mask property
- Remaining platform remove callback returning void conversions
Driver fixes for:
- Xilinx xdma driver operator precedence and initialization fix
- Excess kernel-doc warning fix in imx-sdma xilinx xdma drivers
- format-overflow warning fix for rz-dmac, sh usb dmac drivers
- 'output may be truncated' fix for shdma, fsl-qdma and dw-edma
drivers"
* tag 'dmaengine-fix-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (58 commits)
dmaengine: dw-edma: increase size of 'name' in debugfs code
dmaengine: fsl-qdma: increase size of 'irq_name'
dmaengine: shdma: increase size of 'dev_id'
dmaengine: xilinx: xdma: Fix kernel-doc warnings
dmaengine: usb-dmac: Avoid format-overflow warning
dmaengine: sh: rz-dmac: Avoid format-overflow warning
dmaengine: imx-sdma: fix Excess kernel-doc warnings
dmaengine: xilinx: xdma: Fix initialization location of desc in xdma_channel_isr()
dmaengine: xilinx: xdma: Fix operator precedence in xdma_prep_interleaved_dma()
dmaengine: xilinx: xdma: statify xdma_prep_interleaved_dma
dmaengine: xilinx: xdma: Workaround truncation compilation error
dmaengine: pl330: issue_pending waits until WFP state
dmaengine: xilinx: xdma: Implement interleaved DMA transfers
dmaengine: xilinx: xdma: Prepare the introduction of interleaved DMA transfers
dmaengine: xilinx: xdma: Add transfer error reporting
dmaengine: xilinx: xdma: Add error checking in xdma_channel_isr()
dmaengine: xilinx: xdma: Rework xdma_terminate_all()
dmaengine: xilinx: xdma: Ease dma_pool alignment requirements
dmaengine: xilinx: xdma: Add necessary macro definitions
dmaengine: xilinx: xdma: Get rid of unused code
...
Linus Torvalds [Sat, 20 Jan 2024 22:20:34 +0000 (14:20 -0800)]
Merge tag 'coccinelle-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux
Pull coccinelle updates from Julia Lawall:
"Updates to the device_attr_show semantic patch to reflect the new
guidelines of the Linux kernel documentation.
The problem was identified by Li Zhijian <lizhijian@fujitsu.com>, who
proposed an initial fix"
* tag 'coccinelle-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
coccinelle: device_attr_show: simplify patch case
coccinelle: device_attr_show: Adapt to the latest Documentation/filesystems/sysfs.rst
Aurelien Jarno [Sat, 13 Jan 2024 18:33:31 +0000 (19:33 +0100)]
media: solo6x10: replace max(a, min(b, c)) by clamp(b, a, c)
This patch replaces max(a, min(b, c)) by clamp(b, a, c) in the solo6x10
driver. This improves the readability and more importantly, for the
solo6x10-p2m.c file, this reduces on my system (x86-64, gcc 13):
- the preprocessed size from 121 MiB to 4.5 MiB;
- the build CPU time from 46.8 s to 1.6 s;
- the build memory from 2786 MiB to 98MiB.
In fine, this allows this relatively simple C file to be built on a
32-bit system.
Reported-by: Jiri Slaby <jirislaby@gmail.com> Closes: https://lore.kernel.org/lkml/18c6df0d-45ed-450c-9eda-95160a2bbb8e@gmail.com/ Cc: <stable@vger.kernel.org> # v6.7+ Suggested-by: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: David Laight <David.Laight@ACULAB.COM> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 9 Jan 2024 00:43:04 +0000 (16:43 -0800)]
execve: open the executable file before doing anything else
No point in allocating a new mm, counting arguments and environment
variables etc if we're just going to return ENOENT.
This patch does expose the fact that 'do_filp_open()' that execve() uses
is still unnecessarily expensive in the failure case, because it
allocates the 'struct file *' early, even if the path lookup (which is
heavily optimized) fails.
So that remains an unnecessary cost in the "no such executable" case,
but it's a separate issue. Regardless, I do not want to do _both_ a
filename_lookup() and a later do_filp_open() like the origin patch by
Josh Triplett did in [1].
Linus Torvalds [Sat, 20 Jan 2024 19:06:04 +0000 (11:06 -0800)]
Merge tag 'riscv-for-linus-6.8-mw4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for tuning for systems with fast misaligned accesses.
- Support for SBI-based suspend.
- Support for the new SBI debug console extension.
- The T-Head CMOs now use PA-based flushes.
- Support for enabling the V extension in kernel code.
- Optimized IP checksum routines.
- Various ftrace improvements.
- Support for archrandom, which depends on the Zkr extension.
- The build is no longer broken under NET=n, KUNIT=y for ports that
don't define their own ipv6 checksum.
* tag 'riscv-for-linus-6.8-mw4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (56 commits)
lib: checksum: Fix build with CONFIG_NET=n
riscv: lib: Check if output in asm goto supported
riscv: Fix build error on rv32 + XIP
riscv: optimize ELF relocation function in riscv
RISC-V: Implement archrandom when Zkr is available
riscv: Optimize hweight API with Zbb extension
riscv: add dependency among Image(.gz), loader(.bin), and vmlinuz.efi
samples: ftrace: Add RISC-V support for SAMPLE_FTRACE_DIRECT[_MULTI]
riscv: ftrace: Add DYNAMIC_FTRACE_WITH_DIRECT_CALLS support
riscv: ftrace: Make function graph use ftrace directly
riscv: select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY
lib/Kconfig.debug: Update AS_HAS_NON_CONST_LEB128 comment and name
riscv: Restrict DWARF5 when building with LLVM to known working versions
riscv: Hoist linker relaxation disabling logic into Kconfig
kunit: Add tests for csum_ipv6_magic and ip_fast_csum
riscv: Add checksum library
riscv: Add checksum header
riscv: Add static key for misaligned accesses
asm-generic: Improve csum_fold
RISC-V: selftests: cbo: Ensure asm operands match constraints
...
Linus Torvalds [Sat, 20 Jan 2024 17:42:32 +0000 (09:42 -0800)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Final round of fixes that came in too late to send in the first
request.
It's nine bug fixes and one version update (because of a bug fix) and
one set of PCI ID additions. There's one bug fix in the core which is
really a one liner (except that an additional sdev pointer was added
for convenience) and the rest are in drivers"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: core: Add TMF to tmr_list handling
scsi: core: Kick the requeue list after inserting when flushing
scsi: fnic: unlock on error path in fnic_queuecommand()
scsi: fcoe: Fix unsigned comparison with zero in store_ctlr_mode()
scsi: mpi3mr: Fix mpi3mr_fw.c kernel-doc warnings
scsi: smartpqi: Bump driver version to 2.1.26-030
scsi: smartpqi: Fix logical volume rescan race condition
scsi: smartpqi: Add new controller PCI IDs
scsi: ufs: qcom: Remove unnecessary goto statement from ufs_qcom_config_esi()
scsi: ufs: core: Remove the ufshcd_hba_exit() call from ufshcd_async_scan()
scsi: ufs: core: Simplify power management during async scan
Linus Torvalds [Sat, 20 Jan 2024 17:24:06 +0000 (09:24 -0800)]
Merge tag 'sh-for-v6.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"Since the large patch series to convert arch/sh to device tree support
has not been finalized yet due to various maintainers still asking for
changes to the series, this ended up being rather small consisting of
just two fixes.
The first patch by Geert Uytterhoeven addresses a build failure in the
EcoVec platform code. And the second patch by Masahiro Yamada removes
an unnecessary $(foreach ...) found in a Makefile of the vsyscall
code.
- Rename missed backlight field from fbdev to dev
- Remove unnecessary $(foreach ...)"
* tag 'sh-for-v6.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: vsyscall: Remove unnecessary $(foreach ...)
sh: ecovec24: Rename missed backlight field from fbdev to dev
Linus Torvalds [Sat, 20 Jan 2024 17:14:04 +0000 (09:14 -0800)]
Merge tag 'fbdev-for-6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fix from Helge Deller:
"There were various reports from people without any graphics output on
the screen and it turns out one commit triggers the problem.
- Revert 'firmware/sysfb: Clear screen_info state after consuming it'"
* tag 'fbdev-for-6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
Revert "firmware/sysfb: Clear screen_info state after consuming it"
Linus Torvalds [Fri, 19 Jan 2024 22:25:23 +0000 (14:25 -0800)]
Merge tag 'perf-tools-for-v6.8-1-2024-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Arnaldo Carvalho de Melo:
"Add Namhyung Kim as tools/perf/ co-maintainer, we're taking turns
processing patches, switching roles from perf-tools to perf-tools-next
at each Linux release.
Data profiling:
- Associate samples that identify loads and stores with data
structures. This uses events available on Intel, AMD and others and
DWARF info:
# To get memory access samples in kernel for 1 second (on Intel)
$ perf mem record -a -K --ldlat=4 -- sleep 1
# Similar for the AMD (but it requires 6.3+ kernel for BPF filters)
$ perf mem record -a --filter 'mem_op == load || mem_op == store, ip > 0x8000000000000000' -- sleep 1
Then, amongst several modes of post processing, one can do things like:
This uses the existing annotate code, calling objdump to do the
disassembly, with improvements to avoid having this take too long,
but longer term a switch to a disassembler library, possibly
reusing code in the kernel will be pursued.
This is the initial implementation, please use it and report
impressions and bugs. Make sure the kernel-debuginfo packages match
the running kernel. The 'perf report' phase for non short perf.data
files may take a while.
There is a great article about it on LWN:
https://lwn.net/Articles/955709/ - "Data-type profiling for perf"
One last test I did while writing this text, on a AMD Ryzen 5950X,
using a distro kernel, while doing a simple 'find /' on an
otherwise idle system resulted in:
- Add s390 raw data interpretation for PAI (Processor Activity
Instrumentation) counters.
perf archive:
- Add new option '--all' to pack perf.data with DSOs.
- Add new option '--unpack' to expand tarballs.
Initialization speedups:
- Lazily initialize zstd streams to save memory when not using it.
- Lazily allocate/size mmap event copy.
- Lazy load kernel symbols in 'perf record'.
- Be lazier in allocating lost samples buffer in 'perf record'.
- Don't synthesize BPF events when disabled via the command line
(perf record --no-bpf-event).
Assorted improvements:
- Show note on AMD systems that the :p, :pp, :ppp and :P are all the
same, as IBS (Instruction Based Sampling) is used and it is
inherentely precise, not having levels of precision like in Intel
systems.
- When 'cycles' isn't available, fall back to the "task-clock" event
when not system wide, not to 'cpu-clock'.
- Add --debug-file option to redirect debug output, e.g.:
$ perf --debug-file /tmp/perf.log record -v true
- Shrink 'struct map' to under one cacheline by avoiding function
pointers for selecting if addresses are identity or DSO relative,
and using just a byte for some boolean struct members.
- Resolve the arch specific strerrno just once to use in
perf_env__arch_strerrno().
- Reduce memory for recording PERF_RECORD_LOST_SAMPLES event.
Assorted fixes:
- Fix the default 'perf top' usage on Intel hybrid systems, now it
starts with a browser showing the number of samples for Efficiency
(cpu_atom/cycles/P) and Performance (cpu_core/cycles/P). This
behaviour is similar on ARM64, with its respective set of
big.LITTLE processors.
- Fix segfault on build_mem_topology() error path.
- Fix 'perf mem' error on hybrid related to availability of mem event
in a PMU.
- Fix missing reference count gets (map, maps) in the db-export code.
- Avoid recursively taking env->bpf_progs.lock in the 'perf_env'
code.
- Use the newly introduced maps__for_each_map() to add missing
locking around iteration of 'struct map' entries.
- Parse NOTE segments until the build id is found, don't stop on the
first one, ELF files may have several such NOTE segments.
- Remove 'egrep' usage, its deprecated, use 'grep -E' instead.
- Warn first about missing libelf, not libbpf, that depends on
libelf.
- Use alternative to 'find ... -printf' as this isn't supported in
busybox.
- Address python 3.6 DeprecationWarning for string scapes.
- Fix memory leak in uniq() in libsubcmd.
- Fix man page formatting for 'perf lock'
- Fix some spelling mistakes.
perf tests:
- Fail shell tests that needs some symbol in perf itself if it is
stripped. These tests check if a symbol is resolved, if some hot
function is indeed detected by profiling, etc.
- The 'perf test sigtrap' test is currently failing on PREEMPT_RT,
skip it if sleeping spinlocks are detected (using BTF) and point to
the mailing list discussion about it. This test is also being
skipped on several architectures (powerpc, s390x, arm and aarch64)
due to other pending issues with intruction breakpoints.
- Adjust test case perf record offcpu profiling tests for s390.
- Fix 'Setup struct perf_event_attr' fails on s390 on z/VM guest,
addressing issues caused by the fallback from cycles to task-clock
done in this release.
- Fix mask for VG register in the user-regs test.
- Use shellcheck on 'perf test' shell scripts automatically to make
sure changes don't introduce things it flags as problematic.
- Add option to change objdump binary and allow it to be set via
'perf config'.
- Add basic 'perf script', 'perf list --json" and 'perf diff' tests.
- Basic branch counter support.
- Make DSO tests a suite rather than individual.
- Remove atomics from test_loop to avoid test failures.
- Fix call chain match on powerpc for the record+probe_libc_inet_pton
test.
- Improve Intel hybrid tests.
Vendor event files (JSON):
powerpc:
- Update datasource event name to fix duplicate events on IBM's
Power10.
- Add PVN for HX-C2000 CPU with Power8 Architecture.
Intel:
- Alderlake/rocketlake metric fixes.
- Update emeraldrapids events to v1.02.
- Update icelakex events to v1.23.
- Update sapphirerapids events to v1.17.
- Add skx, clx, icx and spr upi bandwidth metric.
AMD:
- Add Zen 4 memory controller events.
RISC-V:
- Add StarFive Dubhe-80 and Dubhe-90 JSON files.
https://www.starfivetech.com/en/site/cpu-u
Linus Torvalds [Fri, 19 Jan 2024 21:49:16 +0000 (13:49 -0800)]
Merge tag 'strlcpy-removal-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull strlcpy removal from Kees Cook:
"As promised, this is 'part 2' of the hardening tree, late in -rc1 now
that all the other trees with strlcpy() removals have landed. One new
user appeared (in bcachefs) but was a trivial refactor. The kernel is
now free of the strlcpy() API!
- Remove of the final (very recent) user of strlcpy() (in bcachefs)
- Remove the strlcpy() API. Long live strscpy()"
* tag 'strlcpy-removal-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
string: Remove strlcpy()
bcachefs: Replace strlcpy() with strscpy()
Linus Torvalds [Fri, 19 Jan 2024 21:36:15 +0000 (13:36 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"I think the main one is fixing the dynamic SCS patching when full LTO
is enabled (clang was silently getting this horribly wrong), but it's
all good stuff.
Rob just pointed out that the fix to the workaround for erratum
#2966298 might not be necessary, but in the worst case it's harmless
and since the official description leaves a little to be desired here,
I've left it in.
Summary:
- Fix shadow call stack patching with LTO=full
- Fix voluntary preemption of the FPSIMD registers from assembly code
- Fix workaround for A520 CPU erratum #2966298 and extend to A510
- Fix SME issues that resulted in corruption of the register state
- Minor fixes (missing includes, formatting)"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix silcon-errata.rst formatting
arm64/sme: Always exit sme_alloc() early with existing storage
arm64/fpsimd: Remove spurious check for SVE support
arm64/ptrace: Don't flush ZA/ZT storage when writing ZA via ptrace
arm64: entry: simplify kernel_exit logic
arm64: entry: fix ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
arm64: errata: Add Cortex-A510 speculative unprivileged load workaround
arm64: Rename ARM64_WORKAROUND_2966298
arm64: fpsimd: Bring cond_yield asm macro in line with new rules
arm64: scs: Work around full LTO issue with dynamic SCS
arm64: irq: include <linux/cpumask.h>
Linus Torvalds [Fri, 19 Jan 2024 21:30:49 +0000 (13:30 -0800)]
Merge tag 'loongarch-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Raise minimum clang version to 18.0.0
- Enable initial Rust support for LoongArch
- Add built-in dtb support for LoongArch
- Use generic interface to support crashkernel=X,[high,low]
- Some bug fixes and other small changes
- Update the default config file.
* tag 'loongarch-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (22 commits)
MAINTAINERS: Add BPF JIT for LOONGARCH entry
LoongArch: Update Loongson-3 default config file
LoongArch: BPF: Prevent out-of-bounds memory access
LoongArch: BPF: Support 64-bit pointers to kfuncs
LoongArch: Fix definition of ftrace_regs_set_instruction_pointer()
LoongArch: Use generic interface to support crashkernel=X,[high,low]
LoongArch: Fix and simplify fcsr initialization on execve()
LoongArch: Let cores_io_master cover the largest NR_CPUS
LoongArch: Change SHMLBA from SZ_64K to PAGE_SIZE
LoongArch: Add a missing call to efi_esrt_init()
LoongArch: Parsing CPU-related information from DTS
LoongArch: dts: DeviceTree for Loongson-2K2000
LoongArch: dts: DeviceTree for Loongson-2K1000
LoongArch: dts: DeviceTree for Loongson-2K0500
LoongArch: Allow device trees be built into the kernel
dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for interrupt-names
dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for reg-names
dt-bindings: loongarch: Add Loongson SoC boards compatibles
dt-bindings: loongarch: Add CPU bindings for LoongArch
LoongArch: Enable initial Rust support
...
Jens Axboe reported a regression that his machine is failing to show a
console, or in fact anything, on current -git. There's no output and no
console after:
Loading Linux 6.7.0+ ...
Loading initial ramdisk ...
Linus Torvalds [Fri, 19 Jan 2024 21:00:45 +0000 (13:00 -0800)]
Merge tag 'devicetree-for-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree header detangling from Rob Herring:
"Remove the circular including of of_device.h and of_platform.h along
with all of their implicit includes.
This is the culmination of several kernel cycles worth of fixing
implicit DT includes throughout the tree"
* tag 'devicetree-for-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: Stop circularly including of_device.h and of_platform.h
clk: qcom: gcc-x1e80100: Replace of_device.h with explicit includes
thermal: loongson2: Replace of_device.h with explicit includes
net: can: Use device_get_match_data()
sparc: Use device_get_match_data()
Li Zhijian [Fri, 19 Jan 2024 06:20:57 +0000 (14:20 +0800)]
coccinelle: device_attr_show: Adapt to the latest Documentation/filesystems/sysfs.rst
Adapt description, warning message and MODE=patch according to the latest
Documentation/filesystems/sysfs.rst:
> show() should only use sysfs_emit() or sysfs_emit_at() when formatting
> the value to be returned to user space.
After this patch:
When MODE=report,
$ make coccicheck COCCI=scripts/coccinelle/api/device_attr_show.cocci M=drivers/hid/hid-picolcd_core.c MODE=report
<...snip...>
drivers/hid/hid-picolcd_core.c:304:8-16: WARNING: please use sysfs_emit or sysfs_emit_at
drivers/hid/hid-picolcd_core.c:259:9-17: WARNING: please use sysfs_emit or sysfs_emit_at
CC: Julia Lawall <Julia.Lawall@inria.fr> CC: Nicolas Palix <nicolas.palix@imag.fr> CC: cocci@inria.fr Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Linus Torvalds [Fri, 19 Jan 2024 20:50:09 +0000 (12:50 -0800)]
Merge tag 'spi-fix-v6.8-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"One simple fix for the device unbind path in the Coldfire driver.
A conversion to use a combined get/enable helper missed removing a
disable"
* tag 'spi-fix-v6.8-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: coldfire-qspi: Remove an erroneous clk_disable_unprepare() from the remove function
Linus Torvalds [Fri, 19 Jan 2024 20:30:29 +0000 (12:30 -0800)]
Merge tag 'sound-fix-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes:
- Lots of ASoC SOF fixes and related reworks
- ASoC TAS codec fixes including DT updates
- A few HD-audio quirks and regression fixes
- Minor fixes for aloop, oxygen and scarlett2 mixer"
* tag 'sound-fix-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: hda/realtek: Enable headset mic on Lenovo M70 Gen5
ALSA: hda/realtek: Enable mute/micmute LEDs and limit mic boost on HP ZBook
ALSA: hda/relatek: Enable Mute LED on HP Laptop 15s-fq2xxx
ASoC: SOF: ipc4-loader: remove the CPC check warnings
ASoC: SOF: ipc4-pcm: remove log message for LLP
ALSA: hda: generic: Remove obsolete call to ledtrig_audio_get
ALSA: scarlett2: Fix yet more -Wformat-truncation warnings
ALSA: hda: Properly setup HDMI stream
ASoC: audio-graph-card2: fix index check on graph_parse_node_multi_nm()
ASoC: SOF: icp3-dtrace: Revert "Fix wrong kfree() usage"
ALSA: oxygen: Fix right channel of capture volume mixer
ALSA: aloop: Introduce a function to get if access is interleaved mode
ASoC: mediatek: sof-common: Add NULL check for normal_link string
ASoC: mediatek: mt8195: Remove afe-dai component and rework codec link
ASoC: mediatek: mt8192: Check existence of dai_name before dereferencing
ASoC: Intel: bxt_rt298: Fix kernel ops due to COMP_DUMMY change
ASoC: Intel: bxt_da7219_max98357a: Fix kernel ops due to COMP_DUMMY change
ASoC: codecs: rtq9128: Fix TDM enable and DAI format control flow
ASoC: codecs: rtq9128: Fix PM_RUNTIME usage
ASoC: tas2781: Add tas2563 into driver
...
Kees Cook [Thu, 18 Jan 2024 20:31:55 +0000 (12:31 -0800)]
string: Remove strlcpy()
With all the users of strlcpy() removed[1] from the kernel, remove the
API, self-tests, and other references. Leave mentions in Documentation
(about its deprecation), and in checkpatch.pl (to help migrate host-only
tools/ usage). Long live strscpy().
Link: https://github.com/KSPP/linux/issues/89 Cc: Azeem Shaikh <azeemshaikh38@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Whitcroft <apw@canonical.com> Cc: Joe Perches <joe@perches.com> Cc: Dwaipayan Ray <dwaipayanray1@gmail.com> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Cc: linux-hardening@vger.kernel.org Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org>
Linus Torvalds [Fri, 19 Jan 2024 19:50:00 +0000 (11:50 -0800)]
Merge tag 'drm-next-2024-01-19' of git://anongit.freedesktop.org/drm/drm
Pull more drm fixes from Dave Airlie:
"This is mostly amdgpu and xe fixes, with an amdkfd and nouveau fix
thrown in.
The amdgpu ones are just the usual couple of weeks of fixes. The xe
ones are bunch of cleanups for the new xe driver, the fix you put in
on the merge commit and the kconfig fix that was hiding the problem
from me.
amdgpu:
- DSC fixes
- DC resource pool fixes
- OTG fix
- DML2 fixes
- Aux fix
- GFX10 RLC firmware handling fix
- Revert a broken workaround for SMU 13.0.2
- DC writeback fix
- Enable gfxoff when ROCm apps are active on gfx11 with the proper FW
version
amdkfd:
- Fix dma-buf exports using GEM handles
nouveau:
- fix a unneeded WARN_ON triggering
xe:
- Fix for definition of wakeref_t
- Fix for an error code aliasing
- Fix for VM_UNBIND_ALL in the case there are no bound VMAs
- Fixes for a number of __iomem address space mismatches reported by
sparse
- Fixes for the assignment of exec_queue priority
- A Fix for skip_guc_pc not taking effect
- Workaround for a build problem on GCC 11
- A couple of fixes for error paths
- Fix a Flat CCS compression metadata copy issue
- Fix a misplace array bounds checking
- Don't have display support depend on EXPERT (as discussed on IRC)"
* tag 'drm-next-2024-01-19' of git://anongit.freedesktop.org/drm/drm: (71 commits)
nouveau/vmm: don't set addr on the fail path to avoid warning
drm/amdgpu: Enable GFXOFF for Compute on GFX11
drm/amd/display: Drop 'acrtc' and add 'new_crtc_state' NULL check for writeback requests.
drm/amdgpu: revert "Adjust removal control flow for smu v13_0_2"
drm/amdkfd: init drm_client with funcs hook
drm/amd/display: Fix a switch statement in populate_dml_output_cfg_from_stream_state()
drm/amdgpu: Fix the null pointer when load rlc firmware
drm/amd/display: Align the returned error code with legacy DP
drm/amd/display: Fix DML2 watermark calculation
drm/amd/display: Clear OPTC mem select on disable
drm/amd/display: Port DENTIST hang and TDR fixes to OTG disable W/A
drm/amd/display: Add logging resource checks
drm/amd/display: Init link enc resources in dc_state only if res_pool presents
drm/amd/display: Fix late derefrence 'dsc' check in 'link_set_dsc_pps_packet()'
drm/amd/display: Avoid enum conversion warning
drm/amd/pm: Fix smuv13.0.6 current clock reporting
drm/amd/pm: Add error log for smu v13.0.6 reset
drm/amdkfd: Fix 'node' NULL check in 'svm_range_get_range_boundaries()'
drm/amdgpu: drop exp hw support check for GC 9.4.3
drm/amdgpu: move debug options init prior to amdgpu device init
...
Linus Torvalds [Fri, 19 Jan 2024 19:34:19 +0000 (11:34 -0800)]
Merge tag 'for-v6.8-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"New features:
- bq24190: Add support for BQ24296 charger
Cleanups:
- all reset drivers: Stop using module_platform_driver_probe()
- gpio-restart: use devm_register_sys_off_handler
- pwr-mlxbf: support graceful reboot
- cw2015: correct time_to_empty units
- qcom-battmgr: Fix driver initialization sequence
- bq27xxx: Start/Stop delayed work in suspend/resume
- minor cleanups and fixes"
* tag 'for-v6.8-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (33 commits)
power: supply: bq24190_charger: Fix "initializer element is not constant" error
power: supply: bq24190_charger: Add support for BQ24296
dt-bindings: power: supply: bq24190: Add BQ24296 compatible
dt-bindings: power: reset: xilinx: Rename node names in examples
power: supply: qcom_battmgr: Register the power supplies after PDR is up
dt-bindings: power: reset: qcom-pon: fix inconsistent example
power: supply: Fix null pointer dereference in smb2_probe
power: reset: at91: Drop '__init' from at91_wakeup_status()
power: supply: Use multiple MODULE_AUTHOR statements
power: supply: Fix indentation and some other warnings
power: reset: gpio-restart: Use devm_register_sys_off_handler()
power: supply: bq256xx: fix some problem in bq256xx_hw_init
power: supply: cw2015: correct time_to_empty units in sysfs
power: reset: at91-sama5d2_shdwc: Convert to platform remove callback returning void
power: reset: at91-reset: Convert to platform remove callback returning void
power: reset: tps65086-restart: Convert to platform remove callback returning void
power: reset: syscon-poweroff: Convert to platform remove callback returning void
power: reset: rmobile-reset: Convert to platform remove callback returning void
power: reset: restart-poweroff: Convert to platform remove callback returning void
power: reset: regulator-poweroff: Convert to platform remove callback returning void
...
Linus Torvalds [Fri, 19 Jan 2024 18:53:55 +0000 (10:53 -0800)]
Merge tag 'apparmor-pr-2024-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull AppArmor updates from John Johansen:
"This adds a single feature, switch the hash used to check policy from
sha1 to sha256
There are fixes for two memory leaks, and refcount bug and a potential
crash when a profile name is empty. Along with a couple minor code
cleanups.
Summary:
Features
- switch policy hash from sha1 to sha256
Bug Fixes
- Fix refcount leak in task_kill
- Fix leak of pdb objects and trans_table
- avoid crash when parse profie name is empty
Cleanups
- add static to stack_msg and nulldfa
- more kernel-doc cleanups"
* tag 'apparmor-pr-2024-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: Fix memory leak in unpack_profile()
apparmor: avoid crash when parsed profile name is empty
apparmor: fix possible memory leak in unpack_trans_table
apparmor: free the allocated pdb objects
apparmor: Fix ref count leak in task_kill
apparmor: cleanup network hook comments
apparmor: add missing params to aa_may_ptrace kernel-doc comments
apparmor: declare nulldfa as static
apparmor: declare stack_msg as static
apparmor: switch SECURITY_APPARMOR_HASH from sha1 to sha256
Linus Torvalds [Fri, 19 Jan 2024 17:58:55 +0000 (09:58 -0800)]
Merge tag 'ceph-for-6.8-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"Assorted CephFS fixes and cleanups with nothing standing out"
* tag 'ceph-for-6.8-rc1' of https://github.com/ceph/ceph-client:
ceph: get rid of passing callbacks in __dentry_leases_walk()
ceph: d_obtain_{alias,root}(ERR_PTR(...)) will do the right thing
ceph: fix invalid pointer access if get_quota_realm return ERR_PTR
ceph: remove duplicated code in ceph_netfs_issue_read()
ceph: send oldest_client_tid when renewing caps
ceph: rename create_session_open_msg() to create_session_full_msg()
ceph: select FS_ENCRYPTION_ALGS if FS_ENCRYPTION
ceph: fix deadlock or deadcode of misusing dget()
ceph: try to allocate a smaller extent map for sparse read
libceph: remove MAX_EXTENTS check for sparse reads
ceph: reinitialize mds feature bit even when session in open
ceph: skip reconnecting if MDS is not ready
Linus Torvalds [Fri, 19 Jan 2024 17:31:59 +0000 (09:31 -0800)]
Merge tag '6.8-rc-smb-server-fixes-part2' of git://git.samba.org/ksmbd
Pull more smb server updates from Steve French:
- Fix for incorrect oplock break on directories when leases disabled
- UAF fix for race between create and destroy of tcp connection
- Important session setup SPNEGO fix
- Update ksmbd feature status summary
* tag '6.8-rc-smb-server-fixes-part2' of git://git.samba.org/ksmbd:
ksmbd: only v2 leases handle the directory
ksmbd: fix UAF issue in ksmbd_tcp_new_connection()
ksmbd: validate mech token in session setup
ksmbd: update feature status in documentation
Linus Torvalds [Fri, 19 Jan 2024 17:10:23 +0000 (09:10 -0800)]
Merge tag 'vfs-6.8.netfs' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull netfs updates from Christian Brauner:
"This extends the netfs helper library that network filesystems can use
to replace their own implementations. Both afs and 9p are ported. cifs
is ready as well but the patches are way bigger and will be routed
separately once this is merged. That will remove lots of code as well.
The overal goal is to get high-level I/O and knowledge of the page
cache and ouf of the filesystem drivers. This includes knowledge about
the existence of pages and folios
The pull request converts afs and 9p. This removes about 800 lines of
code from afs and 300 from 9p. For 9p it is now possible to do writes
in larger than a page chunks. Additionally, multipage folio support
can be turned on for 9p. Separate patches exist for cifs removing
another 2000+ lines. I've included detailed information in the
individual pulls I took.
Summary:
- Add NFS-style (and Ceph-style) locking around DIO vs buffered I/O
calls to prevent these from happening at the same time.
- Support for direct and unbuffered I/O.
- Support for write-through caching in the page cache.
- O_*SYNC and RWF_*SYNC writes use write-through rather than writing
to the page cache and then flushing afterwards.
- Support for write-streaming.
- Support for write grouping.
- Skip reads for which the server could only return zeros or EOF.
- The fscache module is now part of the netfs library and the
corresponding maintainer entry is updated.
- Some helpers from the fscache subsystem are renamed to mark them as
belonging to the netfs library.
- Follow-up fixes for the netfs library.
- Follow-up fixes for the 9p conversion"
* tag 'vfs-6.8.netfs' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (50 commits)
netfs: Fix wrong #ifdef hiding wait
cachefiles: Fix signed/unsigned mixup
netfs: Fix the loop that unmarks folios after writing to the cache
netfs: Fix interaction between write-streaming and cachefiles culling
netfs: Count DIO writes
netfs: Mark netfs_unbuffered_write_iter_locked() static
netfs: Fix proc/fs/fscache symlink to point to "netfs" not "../netfs"
netfs: Rearrange netfs_io_subrequest to put request pointer first
9p: Use length of data written to the server in preference to error
9p: Do a couple of cleanups
9p: Fix initialisation of netfs_inode for 9p
cachefiles: Fix __cachefiles_prepare_write()
9p: Use netfslib read/write_iter
afs: Use the netfs write helpers
netfs: Export the netfs_sreq tracepoint
netfs: Optimise away reads above the point at which there can be no data
netfs: Implement a write-through caching option
netfs: Provide a launder_folio implementation
netfs: Provide a writepages implementation
netfs, cachefiles: Pass upper bound length to allow expansion
...
Shyam Prasad N [Wed, 3 Jan 2024 12:51:49 +0000 (12:51 +0000)]
cifs: update iface_last_update on each query-and-update
iface_last_update was an unused field when it was introduced.
Later, when we had periodic update of server interface list,
this field was used regularly to decide when to update next.
However, with the new logic of updating the interfaces, it
becomes crucial that this field be updated whenever
parse_server_interfaces runs successfully.
This change updates this field when either the server does
not support query of interfaces; so that we do not query
the interfaces repeatedly. It also updates the field when
the function reaches the end.
Fixes: aa45dadd34e4 ("cifs: change iface_list from array to sorted linked list") Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Shyam Prasad N [Tue, 2 Jan 2024 13:14:46 +0000 (13:14 +0000)]
cifs: handle servers that still advertise multichannel after disabling
Some servers like Azure SMB servers always advertise multichannel
capability in server capabilities list. Such servers return error
STATUS_NOT_IMPLEMENTED for ioctl calls to query server interfaces,
and expect clients to consider that as a sign that they do not support
multichannel.
We already handled this at mount time. Soon after the tree connect,
we query server interfaces. And when server returned STATUS_NOT_IMPLEMENTED,
we kept interface list as empty. When cifs_try_adding_channels gets
called, it would not find any interfaces, so will not add channels.
For the case where an active multichannel mount exists, and multichannel
is disabled by such a server, this change will now allow the client
to disable secondary channels on the mount. It will check the return
status of query server interfaces call soon after a tree reconnect.
If the return status is EOPNOTSUPP, then instead of the check to add
more channels, we'll disable the secondary channels instead.
For better code reuse, this change also moves the common code for
disabling multichannel to a helper function.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Shyam Prasad N [Wed, 17 Jan 2024 06:09:16 +0000 (06:09 +0000)]
cifs: new mount option called retrans
We have several places in the code where we treat the
error -EAGAIN very differently. Some code retry for
arbitrary number of times.
Introducing this new mount option named "retrans", so
that all these handlers of -EAGAIN can retry a fixed
number of times. This applies only to soft mounts.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Shyam Prasad N [Wed, 3 Jan 2024 08:36:22 +0000 (08:36 +0000)]
cifs: reschedule periodic query for server interfaces
Today, we schedule periodic query for server interfaces
once every 10 minutes once a tree connection has been
established. Recent change to handle disabling of
multichannel disabled this delayed work.
This change reenables it following a reconnect, and
the server advertises multichannel.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
projects / mirror_ubuntu-kernels.git / log