You-Sheng Yang [Mon, 11 Apr 2022 09:24:08 +0000 (17:24 +0800)]
UBUNTU: SAUCE: vmd: fixup bridge ASPM by driver name instead
BugLink: https://bugs.launchpad.net/bugs/1942160
Additional VMD bridge IDs needed for new Alder Lake platforms, but
actually there is no a complete list for them. Here we match bridge
devices if they're directly attached to a VMD controller instead.
Signed-off-by: You-Sheng Yang <vicamo.yang@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Andy Chi [Mon, 25 Apr 2022 09:23:36 +0000 (17:23 +0800)]
ALSA: hda/realtek: Enable mute/micmute LEDs and limit mic boost on EliteBook 845/865 G9
BugLink: https://bugs.launchpad.net/bugs/1970178
On HP EliteBook 845 G9 and EliteBook 865 G9, the audio LEDs can be enabled by
ALC285_FIXUP_HP_MUTE_LED. So use it accordingly.
Signed-off-by: Andy Chi <andy.chi@canonical.com> Fixes: 07bcab93946c ("ALSA: hda/realtek: Add support for HP Laptops") Link: https://lore.kernel.org/r/20220421063606.39772-1-andy.chi@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
(cherry picked from commit b3fbe53610b5ed8f0370ec4c7e6c8a1f261ddf70) Signed-off-by: Andy Chi <andy.chi@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Kai-Heng Feng [Wed, 30 Mar 2022 07:36:20 +0000 (15:36 +0800)]
ALSA: hda/realtek: Enable headset mic on Lenovo P360
BugLink: https://bugs.launchpad.net/bugs/1967069
Lenovo P360 is another platform equipped with ALC897, and it needs
ALC897_FIXUP_HEADSET_MIC_PIN quirk to make its headset mic work.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20220325160501.705221-1-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
(cherry picked from commit 5a8738571747c1e275a40b69a608657603867b7e) Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Zijun Hu [Fri, 1 Apr 2022 11:32:52 +0000 (19:32 +0800)]
Bluetooth: btusb: Improve stability for QCA devices
BugLink: https://bugs.launchpad.net/bugs/1967067
WCN6855 2.1 will reset to apply firmware downloaded, so wait
a moment for reset done then go ahead to improve stability.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
(cherry picked from commit 599ece4f8f073097904d411ee70280a2ec890ad3) Signed-off-by: You-Sheng Yang <vicamo.yang@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Uma Shankar [Thu, 21 Apr 2022 06:15:33 +0000 (14:15 +0800)]
drm/i915/xelpd: Add Pipe Color Lut caps to platform config
BugLink: https://bugs.launchpad.net/bugs/1967274
XE_LPD has 128 Lut entries for Degamma, with additional 3 entries for
extended range. It has 511 entries for gamma with additional 2 entries
for extended range.
v2: Updated lut size for 10bit gamma, added lut_tests (Ville)
Uma Shankar [Thu, 21 Apr 2022 06:15:32 +0000 (14:15 +0800)]
drm/i915/xelpd: Enable Pipe Degamma
BugLink: https://bugs.launchpad.net/bugs/1967274
Enable Pipe Degamma for XE_LPD. Extend the legacy implementation
to incorparate the extended lut size for XE_LPD.
Ville Syrjälä [Thu, 21 Apr 2022 06:15:31 +0000 (14:15 +0800)]
drm/i915: Use unlocked register accesses for LUT loads
BugLink: https://bugs.launchpad.net/bugs/1967274
We have to bash in a lot of registers to load the higher
precision LUT modes. The locking overhead is significant, especially
as we have to get this done as quickly as possible during vblank.
So let's switch to unlocked accesses for these. Fortunately the LUT
registers are mostly spread around such that two pipes do not have
any registers on the same cacheline. So as long as commits on the
same pipe are serialized (which they are) we should get away with
this without angering the hardware.
The only exceptions are the PREC_PIPEGCMAX registers on ilk/snb which
we don't use atm as they are only used in the 12bit gamma mode. If/when
we add support for that we may need to remember to still serialize
those registers, though I'm not sure ilk/snb are actually affected
by the same cacheline issue. I think ivb/hsw at least were, but they
use a different set of registers for the precision LUT.
I have a test case which is updating the LUTs on two pipes from a
single atomic commit. Running that in a loop for a minute I get the
following worst case with the locks in place:
intel_crtc_vblank_work_start: pipe B, frame=10037, scanline=1081
intel_crtc_vblank_work_start: pipe A, frame=12274, scanline=769
intel_crtc_vblank_work_end: pipe A, frame=12274, scanline=58
intel_crtc_vblank_work_end: pipe B, frame=10037, scanline=74
And here's the worst case with the locks removed:
intel_crtc_vblank_work_start: pipe B, frame=5869, scanline=1081
intel_crtc_vblank_work_start: pipe A, frame=7616, scanline=769
intel_crtc_vblank_work_end: pipe B, frame=5869, scanline=1096
intel_crtc_vblank_work_end: pipe A, frame=7616, scanline=777
The test was done on a snb using the 10bit 1024 entry LUT mode.
The vtotals for the two displays are 793 and 1125. So we can
see that with the locks ripped out the LUT updates are pretty
nicely confined within the vblank, whereas with the locks in
place we're routinely blasting past the vblank end which causes
visual artifacts near the top of the screen.
Uma Shankar [Thu, 21 Apr 2022 06:15:30 +0000 (14:15 +0800)]
drm/i915/xelpd: Enable Pipe color support for D13 platform
BugLink: https://bugs.launchpad.net/bugs/1967274
Enable pipe color support for Display 13 platforms. Currently
limit to just 10bit gamma and later extend it for logarithmic
gamma, once the new UAPI is agreed by community and implemented
by a userspace consumer.
There are race conditions that may lead to UAF bugs in
ax25_heartbeat_expiry(), ax25_t1timer_expiry(), ax25_t2timer_expiry(),
ax25_t3timer_expiry() and ax25_idletimer_expiry(), when we call
ax25_release() to deallocate ax25_dev.
One of the UAF bugs caused by ax25_release() is shown below:
We increase the refcount of ax25_dev in position (1) and (2), and
decrease the refcount of ax25_dev in position (3) and (4).
The ax25_dev will be freed in position (4) and be used in
ax25_t1timer_expiry().
The fail log is shown below:
==============================================================
[ 106.116942] BUG: KASAN: use-after-free in ax25_t1timer_expiry+0x1c/0x60
[ 106.116942] Read of size 8 at addr ffff88800bda9028 by task swapper/0/0
[ 106.116942] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.17.0-06123-g0905eec574
[ 106.116942] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-14
[ 106.116942] Call Trace:
...
[ 106.116942] ax25_t1timer_expiry+0x1c/0x60
[ 106.116942] call_timer_fn+0x122/0x3d0
[ 106.116942] __run_timers.part.0+0x3f6/0x520
[ 106.116942] run_timer_softirq+0x4f/0xb0
[ 106.116942] __do_softirq+0x1c2/0x651
...
This patch adds del_timer_sync() in ax25_release(), which could ensure
that all timers stop before we deallocate ax25_dev.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[OP: backport to 5.15: adjust context] Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The previous commit 7ec02f5ac8a5 ("ax25: fix NPD bug in ax25_disconnect")
move ax25_disconnect into lock_sock() in order to prevent NPD bugs. But
there are race conditions that may lead to null pointer dereferences in
ax25_heartbeat_expiry(), ax25_t1timer_expiry(), ax25_t2timer_expiry(),
ax25_t3timer_expiry() and ax25_idletimer_expiry(), when we use
ax25_kill_by_device() to detach the ax25 device.
One of the race conditions that cause null pointer dereferences can be
shown as below:
This patch moves ax25_disconnect() before s->ax25_dev = NULL
and uses del_timer_sync() to delete timers in ax25_disconnect().
If ax25_disconnect() is called by ax25_kill_by_device() or
ax25->ax25_dev is NULL, the reason in ax25_disconnect() will be
equal to ENETUNREACH, it will wait all timers to stop before we
set null to s->ax25_dev in ax25_kill_by_device().
Fixes: 7ec02f5ac8a5 ("ax25: fix NPD bug in ax25_disconnect") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
[OP: backport to 5.15: adjust context] Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The ax25_disconnect() in ax25_kill_by_device() is not
protected by any locks, thus there is a race condition
between ax25_disconnect() and ax25_destroy_socket().
when ax25->sk is assigned as NULL by ax25_destroy_socket(),
a NULL pointer dereference bug will occur if site (1) or (2)
dereferences ax25->sk.
The refcount of ax25_dev increases in position (1) and (2), and
decreases in position (3) and (4). The ax25_dev will be freed
before dereference sites in ax25_send_control().
The previous commit d01ffb9eee4a ("ax25: add refcount in ax25_dev to
avoid UAF bugs") and commit feef318c855a ("ax25: fix UAF bugs of
net_device caused by rebinding operation") increase the refcounts of
ax25_dev and net_device in ax25_bind() and decrease the matching refcounts
in ax25_kill_by_device() in order to prevent UAF bugs, but there are
reference count leaks.
Firstly, we use ax25_bind() to increase the refcount of ax25_dev in
position (1) and increase the refcount of net_device in position (2).
Then, we use ax25_cb_del() invoked by ax25_destroy_socket() to delete
ax25_cb in hlist in position (3) before calling ax25_kill_by_device().
Finally, the decrements of refcounts in ax25_kill_by_device() will not
be executed, because no s->ax25_dev equals to ax25_dev in position (4).
This patch adds decrements of refcounts in ax25_release() and use
lock_sock() to do synchronization. If refcounts decrease in ax25_release(),
the decrements of refcounts in ax25_kill_by_device() will not be
executed and vice versa.
Fixes: d01ffb9eee4a ("ax25: add refcount in ax25_dev to avoid UAF bugs") Fixes: 87563a043cef ("ax25: fix reference count leaks of ax25_dev") Fixes: feef318c855a ("ax25: fix UAF bugs of net_device caused by rebinding operation") Reported-by: Thomas Osterried <thomas@osterried.de> Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
[OP: backport to 5.15: adjust dev_put_track()->dev_put()] Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The ax25_kill_by_device() will set s->ax25_dev = NULL and
call ax25_disconnect() to change states of ax25_cb and
sock, if we call ax25_bind() before ax25_kill_by_device().
However, if we call ax25_bind() again between the window of
ax25_kill_by_device() and ax25_dev_device_down(), the values
and states changed by ax25_kill_by_device() will be reassigned.
Finally, ax25_dev_device_down() will deallocate net_device.
If we dereference net_device in syscall functions such as
ax25_release(), ax25_sendmsg(), ax25_getsockopt(), ax25_getname()
and ax25_info_show(), a UAF bug will occur.
One of the possible race conditions is shown below:
the corresponding fail log is shown below:
===============================================================
BUG: KASAN: use-after-free in ax25_send_control+0x43/0x210
...
Call Trace:
...
ax25_send_control+0x43/0x210
ax25_release+0x2db/0x3b0
__sock_release+0x6d/0x120
sock_close+0xf/0x20
__fput+0x11f/0x420
...
Allocated by task 1283:
...
__kasan_kmalloc+0x81/0xa0
alloc_netdev_mqs+0x5a/0x680
mkiss_open+0x6c/0x380
tty_ldisc_open+0x55/0x90
...
Freed by task 1969:
...
kfree+0xa3/0x2c0
device_release+0x54/0xe0
kobject_put+0xa5/0x120
tty_ldisc_kill+0x3e/0x80
...
In order to fix these UAF bugs caused by rebinding operation,
this patch adds dev_hold_track() into ax25_bind() and
corresponding dev_put_track() into ax25_kill_by_device().
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
[OP: backport to 5.15: adjust dev_put_track()->dev_put() and
dev_hold_track()->dev_hold()] Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The previous commit d01ffb9eee4a ("ax25: add refcount in ax25_dev
to avoid UAF bugs") introduces refcount into ax25_dev, but there
are reference leak paths in ax25_ctl_ioctl(), ax25_fwd_ioctl(),
ax25_rt_add(), ax25_rt_del() and ax25_rt_opt().
This patch uses ax25_dev_put() and adjusts the position of
ax25_addr_ax25dev() to fix reference cout leaks of ax25_dev.
Fixes: d01ffb9eee4a ("ax25: add refcount in ax25_dev to avoid UAF bugs") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220203150811.42256-1-duoming@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[OP: backport to 5.15: adjust context] Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
If we dereference ax25_dev after we call kfree(ax25_dev) in
ax25_dev_device_down(), it will lead to concurrency UAF bugs.
There are eight syscall functions suffer from UAF bugs, include
ax25_bind(), ax25_release(), ax25_connect(), ax25_ioctl(),
ax25_getname(), ax25_sendmsg(), ax25_getsockopt() and
ax25_info_show().
The root cause of UAF bugs is that kfree(ax25_dev) in
ax25_dev_device_down() is not protected by any locks.
When ax25_dev, which there are still pointers point to,
is released, the concurrency UAF bug will happen.
This patch introduces refcount into ax25_dev in order to
guarantee that there are no pointers point to it when ax25_dev
is released.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
[OP: backport to 5.15: adjusted context] Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
On systems with overclocking enabled, CPPC Highest Performance can be
hard coded to 0xff. In this case even if we have cores with different
highest performance, ITMT can't be enabled as the current implementation
depends on CPPC Highest Performance.
On such systems we can use MSR_HWP_CAPABILITIES maximum performance field
when CPPC.Highest Performance is 0xff.
Due to legacy reasons, we can't solely depend on MSR_HWP_CAPABILITIES as
in some older systems CPPC Highest Performance is the only way to identify
different performing cores.
Reported-by: Michael Larabel <Michael@MichaelLarabel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Tested-by: Michael Larabel <Michael@MichaelLarabel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
An IPA build problem arose in the linux-next tree the other day.
The problem is that a recent commit adds a new dependency on some
code, and the Kconfig file for IPA doesn't reflect that dependency.
As a result, some configurations can fail to build (particularly
when COMPILE_TEST is enabled).
The recent patch adds calls to qmp_get(), qmp_put(), and qmp_send(),
and those are built based on the QCOM_AOSS_QMP config option. If
that symbol is not defined, stubs are defined, so we just need to
ensure QCOM_AOSS_QMP is compatible with QCOM_IPA, or it's not
defined.
Reported-by: Randy Dunlap <rdunlap@infradead.org> Fixes: 34a081761e4e3 ("net: ipa: request IPA register values be retained") Signed-off-by: Alex Elder <elder@linaro.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the error handling paths.
Fixes: 8c75d585b931 ("soc: qcom: aoss: Expose send for generic usecase") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220108095931.21527-1-linmq006@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Currently the setting of the 'cpu' member of struct cpuhp_cpu_state in
cpuhp_create() is too late as it is used earlier in _cpu_up().
If kzalloc_node() in __smpboot_create_thread() fails then the rollback will
be done with st->cpu==0 causing CPU0 to be erroneously set to be dying,
causing the scheduler to get mightily confused and throw its toys out of
the pram.
However the cpu number is actually available directly, so simply remove
the 'cpu' member and avoid the problem in the first place.
Fixes: 2ea46c6fc945 ("cpumask/hotplug: Fix cpu_dying() state tracking") Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20220411152233.474129-2-steven.price@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The intent of the version check in the mmap ioctl was to maintain
support for existing platforms (i.e., ADL/RPL and earlier), but drop
support on all future igpu platforms. As we've seen on the dgpu side,
the hardware teams are using a more fine-grained numbering system for IP
version numbers these days, so it's possible the version number
associated with our next igpu could be some form of "12.xx" rather than
13 or higher. Comparing against the full ver.release number will ensure
the intent of the check is maintained no matter what numbering the
hardware teams settle on.
Fixes: d3f3baa3562a ("drm/i915: Reinstate the mmap ioctl for some platforms") Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220407161839.1073443-1-matthew.d.roper@intel.com
(cherry picked from commit 8e7e5c077cd57ee9a36d58c65f07257dc49a88d5) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
When we looked into FIO performance with swiotlb enabled in VM, we found
swiotlb_bounce() is always called one more time than expected for each DMA
read request.
It turns out that the bounce buffer is copied to original DMA buffer twice
after the completion of a DMA request (one is done by in
dma_direct_sync_single_for_cpu(), the other by swiotlb_tbl_unmap_single()).
But the content in bounce buffer actually doesn't change between the two
rounds of copy. So, one round of copy is redundant.
Pass DMA_ATTR_SKIP_CPU_SYNC flag to swiotlb_tbl_unmap_single() to
skip the memory copy in it.
This fix increases FIO 64KB sequential read throughput in a guest with
swiotlb=force by 5.6%.
Fixes: 55897af63091 ("dma-direct: merge swiotlb_dma_ops into the dma_direct code") Reported-by: Wang Zhaoyang1 <zhaoyang1.wang@intel.com> Reported-by: Gao Liang <liang.gao@intel.com> Signed-off-by: Chao Gao <chao.gao@intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
When the timer base is empty, base::next_expiry is set to base::clk +
NEXT_TIMER_MAX_DELTA and base::next_expiry_recalc is false. When no timer
is queued until jiffies reaches base::next_expiry value, the warning for
not finding any expired timer and base::next_expiry_recalc is false in
__run_timers() triggers.
To prevent triggering the warning in this valid scenario
base::timers_pending needs to be added to the warning condition.
Fixes: 31cd0e119d50 ("timers: Recalculate next timer interrupt only when necessary") Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20220405191732.7438-3-anna-maria@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
snps,dwmac has duplicated name for loongson,ls2k-dwmac and
loongson,ls7a-dwmac.
Signed-off-by: Dongjin Yang <dj76.yang@samsung.com> Fixes: 68277749a013 ("dt-bindings: dwmac: Add bindings for new Loongson SoC and bridge chip") Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220404022857epcms1p6e6af1a6a86569f339e50c318abde7d3c@epcms1p6 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Wait for completion of write transfers before returning from the driver.
At first sight it may seem advantageous to leave write transfers queued
for the controller to carry out on its own time, but there's a couple of
issues with it:
* Driver doesn't check for FIFO space.
* The queued writes can complete while the driver is in its I2C read
transfer path which means it will get confused by the raising of
XEN (the 'transaction ended' signal). This can cause a spurious
ENODATA error due to premature reading of the MRXFIFO register.
Adding the wait fixes some unreliability issues with the driver. There's
some efficiency cost to it (especially with pasemi_smb_waitready doing
its polling), but that will be alleviated once the driver receives
interrupt support.
Fixes: beb58aa39e6e ("i2c: PA Semi SMBus driver") Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Reviewed-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The check in flush_smp_call_function_queue() for callbacks that are sent
to offline CPUs currently checks whether the queue is empty.
However, flush_smp_call_function_queue() has just deleted all the
callbacks from the queue and moved all the entries into a local list.
This checks would only be positive if some callbacks were added in the
short time after llist_del_all() was called. This does not seem to be
the intention of this check.
Change the check to look at the local list to which the entries were
moved instead of the queue from which all the callbacks were just
removed.
Fixes: 8d056c48e4862 ("CPU hotplug, smp: flush any pending IPI callbacks before CPU offline") Signed-off-by: Nadav Amit <namit@vmware.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20220319072015.1495036-1-namit@vmware.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
If dev_set_name() fails, the dev_name() is null, check the return
value of dev_set_name() to avoid the null-ptr-deref.
Fixes: 1413ef638aba ("i2c: dev: Fix the race between the release of i2c_dev and cdev") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
It is possible to set up dm-integrity in such a way that the
"tag_size" parameter is less than the actual digest size. In this
situation, a part of the digest beyond tag_size is ignored.
In this case, dm-integrity would write beyond the end of the
ic->recalc_tags array and corrupt memory. The corruption happened in
integrity_recalc->integrity_sector_checksum->crypto_shash_final.
Fix this corruption by increasing the tags array so that it has enough
padding at the end to accomodate the loop in integrity_recalc() being
able to write a full digest size for the last member of the tags
array.
Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
With newer versions of GCC, there is a panic in da850_evm_config_emac()
when booting multi_v5_defconfig in QEMU under the palmetto-bmc machine:
Unable to handle kernel NULL pointer dereference at virtual address 00000020
pgd = (ptrval)
[00000020] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 5.15.0 #1
Hardware name: Generic DT based system
PC is at da850_evm_config_emac+0x1c/0x120
LR is at do_one_initcall+0x50/0x1e0
The emac_pdata pointer in soc_info is NULL because davinci_soc_info only
gets populated on davinci machines but da850_evm_config_emac() is called
on all machines via device_initcall().
Move the rmii_en assignment below the machine check so that it is only
dereferenced when running on a supported SoC.
While running some testing on code that happened to allow the variable
tick_nohz_full_running to get set but with no "possible" NOHZ cores to
back up that setting, this warning triggered:
if (unlikely(tick_do_timer_cpu == TICK_DO_TIMER_NONE))
WARN_ON(tick_nohz_full_running);
The console was overwhemled with an endless stream of one WARN per tick
per core and there was no way to even see what was going on w/o using a
serial console to capture it and then trace it back to this.
Change it to WARN_ON_ONCE().
Fixes: 08ae95f4fd3b ("nohz_full: Allow the boot CPU to be nohz_full") Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211206145950.10927-3-paul.gortmaker@windriver.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
If CPUs on a node are offline at boot time, the number of nodes is
different when building affinity masks for present cpus and when building
affinity masks for possible cpus. This causes the following problem:
In the case that the number of vectors is less than the number of nodes
there are cases where bits of masks for present cpus are overwritten when
building masks for possible cpus.
Fix this by excluding CPUs, which are not part of the current build mask
(present/possible).
[ tglx: Massaged changelog and added comment ]
Fixes: b82592199032 ("genirq/affinity: Spread IRQs to all available NUMA nodes") Signed-off-by: Rei Yamamoto <yamamoto.rei@jp.fujitsu.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220331003309.10891-1-yamamoto.rei@jp.fujitsu.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
A microcode update on some Intel processors causes all TSX transactions
to always abort by default[*]. Microcode also added functionality to
re-enable TSX for development purposes. With this microcode loaded, if
tsx=on was passed on the cmdline, and TSX development mode was already
enabled before the kernel boot, it may make the system vulnerable to TSX
Asynchronous Abort (TAA).
To be on safer side, unconditionally disable TSX development mode during
boot. If a viable use case appears, this can be revisited later.
tsx_clear_cpuid() uses MSR_TSX_FORCE_ABORT to clear CPUID.RTM and
CPUID.HLE. Not all CPUs support MSR_TSX_FORCE_ABORT, alternatively use
MSR_IA32_TSX_CTRL when supported.
[ bp: Document how and why TSX gets disabled. ]
Fixes: 293649307ef9 ("x86/tsx: Clear CPUID bits when TSX always force aborts") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Neelima Krishnan <neelima.krishnan@intel.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/5b323e77e251a9c8bcdda498c5cc0095be1e1d3c.1646943780.git.pawan.kumar.gupta@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
"Pre-multiplied" is the default pixel blend mode for KMS/DRM, as
documented in supported_modes of drm_plane_create_blend_mode_property():
https://cgit.freedesktop.org/drm/drm-misc/tree/drivers/gpu/drm/drm_blend.c
In this mode, both 'pixel alpha' and 'plane alpha' participate in the
calculation, as described by the pixel blend mode formula in KMS/DRM
documentation:
Considering the blend config mechanisms we have in the driver so far,
the alpha mode that better fits this blend mode is the
_PER_PIXEL_ALPHA_COMBINED_GLOBAL_GAIN, where the value for global_gain
is the plane alpha (global_alpha).
With this change, alpha property stops to be ignored. It also addresses
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1734
v2:
* keep the 8-bit value for global_alpha_value (Nicholas)
* correct the logical ordering for combined global gain (Nicholas)
* apply to dcn10 too (Nicholas)
Signed-off-by: Melissa Wen <mwen@igalia.com> Tested-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Simon Ser <contact@emersion.fr> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
kongweibin reported a kernel panic in ip6_forward() when input interface
has no in6 dev associated.
The following tc commands were used to reproduce this panic:
tc qdisc del dev vxlan100 root
tc qdisc add dev vxlan100 root netem corrupt 5%
CC: stable@vger.kernel.org Fixes: ccd27f05ae7b ("ipv6: fix 'disable_policy' for fwd packets") Reported-by: kongweibin <kongweibin2@huawei.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
We need this to be at least two bytes, so we can access
alpha2[0] and alpha2[1]. It may be three in case some
userspace used NUL-termination since it was NLA_STRING
(and we also push it out with NUL-termination).
For this specific device on Lenovo Thinkpad X12 tablet, the verbs were
dumped by qemu running a guest OS that init this codec properly.
After studying the dump, it turns out that
the same quirk used by the other Lenovo devices can be reused.
The patch was tested working against the mainline kernel.
When btrfs balance is interrupted with umount, the background balance
resumes on the next mount. There is a potential deadlock with FS freezing
here like as described in commit 26559780b953 ("btrfs: zoned: mark
relocation as writing"). Mark the process as sb_writing to avoid it.
Reviewed-by: Filipe Manana <fdmanana@suse.com> CC: stable@vger.kernel.org # 4.9+ Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The ieee80211_tx_info_clear_status() helper also clears the rate counts and
the driver-private part of struct ieee80211_tx_info, so using it breaks
quite a few other things. So back out of using it, and instead define a
ath-internal helper that only clears the area between the
status_driver_data and the rates info. Combined with moving the
ath_frame_info struct to status_driver_data, this avoids clearing anything
we shouldn't be, and so we can keep the existing code for handling the rate
information.
While fixing this I also noticed that the setting of
tx_info->status.rates[tx_rateindex].count on hardware underrun errors was
always immediately overridden by the normal setting of the same fields, so
rearrange the code so that the underrun detection actually takes effect.
The new helper could be generalised to a 'memset_between()' helper, but
leave it as a driver-internal helper for now since this needs to go to
stable.
Cc: stable@vger.kernel.org Reported-by: Peter Seiderer <ps.report@gmx.net> Fixes: 037250f0a45c ("ath9k: Properly clear TX status area before reporting to mac80211") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Reviewed-by: Peter Seiderer <ps.report@gmx.net> Tested-by: Peter Seiderer <ps.report@gmx.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220404204800.2681133-1-toke@toke.dk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The ath9k driver was not properly clearing the status area in the
ieee80211_tx_info struct before reporting TX status to mac80211. Instead,
it was manually filling in fields, which meant that fields introduced later
were left as-is.
Conveniently, mac80211 actually provides a helper to zero out the status
area, so use that to make sure we zero everything.
The last commit touching the driver function writing the status information
seems to have actually been fixing an issue that was also caused by the
area being uninitialised; but it only added clearing of a single field
instead of the whole struct. That is now redundant, though, so revert that
commit and use it as a convenient Fixes tag.
Fixes: cc591d77aba1 ("ath9k: Make sure to zero status.tx_time before reporting TX status") Reported-by: Bagas Sanjaya <bagasdotme@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Tested-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220330164409.16645-1-toke@toke.dk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
While the latent entropy plugin mostly doesn't derive entropy from
get_random_const() for measuring the call graph, when __latent_entropy is
applied to a constant, then it's initialized statically to output from
get_random_const(). In that case, this data is derived from a 64-bit
seed, which means a buffer of 512 bits doesn't really have that amount
of compile-time entropy.
This patch fixes that shortcoming by just buffering chunks of
/dev/urandom output and doling it out as requested.
At the same time, it's important that we don't break the use of
-frandom-seed, for people who want the runtime benefits of the latent
entropy plugin, while still having compile-time determinism. In that
case, we detect whether gcc's set_random_seed() has been called by
making a call to get_random_seed(noinit=true) in the plugin init
function, which is called after set_random_seed() is called but before
anything that calls get_random_seed(noinit=false), and seeing if it's
zero or not. If it's not zero, we're in deterministic mode, and so we
just generate numbers with a basic xorshift prng.
Note that we don't detect if -frandom-seed is being used using the
documented local_tick variable, because it's assigned via:
local_tick = (unsigned) tv.tv_sec * 1000 + tv.tv_usec / 1000;
which may well overflow and become -1 on its own, and so isn't
reliable: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105171
[kees: The 256 byte rnd_buf size was chosen based on average (250),
median (64), and std deviation (575) bytes of used entropy for a
defconfig x86_64 build]
Fixes: 38addce8b600 ("gcc-plugins: Add latent_entropy plugin") Cc: stable@vger.kernel.org Cc: PaX Team <pageexec@freemail.hu> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220405222815.21155-1-Jason@zx2c4.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Trond Myklebust reports an NFSD crash in svc_rdma_sendto(). Further
investigation shows that the crash occurred while NFSD was handling
a deferred request.
This patch addresses two inter-related issues that prevent request
deferral from working correctly for RPC/RDMA requests:
1. Prevent the crash by ensuring that the original
svc_rqst::rq_xprt_ctxt value is available when the request is
revisited. Otherwise svc_rdma_sendto() does not have a Receive
context available with which to construct its reply.
2. Possibly since before commit 71641d99ce03 ("svcrdma: Properly
compute .len and .buflen for received RPC Calls"),
svc_rdma_recvfrom() did not include the transport header in the
returned xdr_buf. There should have been no need for svc_defer()
and friends to save and restore that header, as of that commit.
This issue is addressed in a backport-friendly way by simply
having svc_rdma_recvfrom() set rq_xprt_hlen to zero
unconditionally, just as svc_tcp_recvfrom() does. This enables
svc_deferred_recv() to correctly reconstruct an RPC message
received via RPC/RDMA.
Reported-by: Trond Myklebust <trondmy@hammerspace.com> Link: https://lore.kernel.org/linux-nfs/82662b7190f26fb304eb0ab1bb04279072439d4e.camel@hammerspace.com/ Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Resolve nx_huge_pages to true/false when kvm.ko is loaded, leaving it as
-1 is technically undefined behavior when its value is read out by
param_get_bool(), as boolean values are supposed to be '0' or '1'.
Alternatively, KVM could define a custom getter for the param, but the
auto value doesn't depend on the vendor module in any way, and printing
"auto" would be unnecessarily unfriendly to the user.
In addition to fixing the undefined behavior, resolving the auto value
also fixes the scenario where the auto value resolves to N and no vendor
module is loaded. Previously, -1 would result in Y being printed even
though KVM would ultimately disable the mitigation.
Rename the existing MMU module init/exit helpers to clarify that they're
invoked with respect to the vendor module, and add comments to document
why KVM has two separate "module init" flows.
=========================================================================
UBSAN: invalid-load in kernel/params.c:320:33
load of value 255 is not a valid value for type '_Bool'
CPU: 6 PID: 892 Comm: tail Not tainted 5.17.0-rc3+ #799
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
ubsan_epilogue+0x5/0x40
__ubsan_handle_load_invalid_value.cold+0x43/0x48
param_get_bool.cold+0xf/0x14
param_attr_show+0x55/0x80
module_attr_show+0x1c/0x30
sysfs_kf_seq_show+0x93/0xc0
seq_read_iter+0x11c/0x450
new_sync_read+0x11b/0x1a0
vfs_read+0xf0/0x190
ksys_read+0x5f/0xe0
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>
=========================================================================
Fixes: b8e8c8303ff2 ("kvm: mmu: ITLB_MULTIHIT mitigation") Cc: stable@vger.kernel.org Reported-by: Bruno Goncalves <bgoncalv@redhat.com> Reported-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220331221359.3912754-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The kmemleak_*_phys() apis do not check the address for lowmem's min
boundary, while the caller may pass an address below lowmem, which will
trigger an oops:
The callers may not quite know the actual address they pass(e.g. from
devicetree). So the kmemleak_*_phys() apis should guarantee the address
they finally use is in lowmem range, so check the address for lowmem's
min boundary.
Link: https://lkml.kernel.org/r/20220413122925.33856-1-patrick.wang.shcn@gmail.com Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Two processes under CLONE_VM cloning, user process can be corrupted by
seeing zeroed page unexpectedly.
CPU A CPU B
do_swap_page do_swap_page
SWP_SYNCHRONOUS_IO path SWP_SYNCHRONOUS_IO path
swap_readpage valid data
swap_slot_free_notify
delete zram entry
swap_readpage zeroed(invalid) data
pte_lock
map the *zero data* to userspace
pte_unlock
pte_lock
if (!pte_same)
goto out_nomap;
pte_unlock
return and next refault will
read zeroed data
The swap_slot_free_notify is bogus for CLONE_VM case since it doesn't
increase the refcount of swap slot at copy_mm so it couldn't catch up
whether it's safe or not to discard data from backing device. In the
case, only the lock it could rely on to synchronize swap slot freeing is
page table lock. Thus, this patch gets rid of the swap_slot_free_notify
function. With this patch, CPU A will see correct data.
CPU A CPU B
do_swap_page do_swap_page
SWP_SYNCHRONOUS_IO path SWP_SYNCHRONOUS_IO path
swap_readpage original data
pte_lock
map the original data
swap_free
swap_range_free
bd_disk->fops->swap_slot_free_notify
swap_readpage read zeroed data
pte_unlock
pte_lock
if (!pte_same)
goto out_nomap;
pte_unlock
return
on next refault will see mapped data by CPU B
The concern of the patch would increase memory consumption since it
could keep wasted memory with compressed form in zram as well as
uncompressed form in address space. However, most of cases of zram uses
no readahead and do_swap_page is followed by swap_free so it will free
the compressed form from in zram quickly.
Link: https://lkml.kernel.org/r/YjTVVxIAsnKAXjTd@google.com Fixes: 0bcac06f27d7 ("mm, swap: skip swapcache for swapin of synchronous device") Reported-by: Ivan Babrou <ivan@cloudflare.com> Tested-by: Ivan Babrou <ivan@cloudflare.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: David Hildenbrand <david@redhat.com> Cc: <stable@vger.kernel.org> [4.14+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Since commit 6aa303defb74 ("mm, vmscan: only allocate and reclaim from
zones with pages managed by the buddy allocator") only zones with free
memory are included in a built zonelist. This is problematic when e.g.
all memory of a zone has been ballooned out when zonelists are being
rebuilt.
The decision whether to rebuild the zonelists when onlining new memory
is done based on populated_zone() returning 0 for the zone the memory
will be added to. The new zone is added to the zonelists only, if it
has free memory pages (managed_zone() returns a non-zero value) after
the memory has been onlined. This implies, that onlining memory will
always free the added pages to the allocator immediately, but this is
not true in all cases: when e.g. running as a Xen guest the onlined new
memory will be added only to the ballooned memory list, it will be freed
only when the guest is being ballooned up afterwards.
Another problem with using managed_zone() for the decision whether a
zone is being added to the zonelists is, that a zone with all memory
used will in fact be removed from all zonelists in case the zonelists
happen to be rebuilt.
Use populated_zone() when building a zonelist as it has been done before
that commit.
There was a report that QubesOS (based on Xen) is hitting this problem.
Xen has switched to use the zone device functionality in kernel 5.9 and
QubesOS wants to use memory hotplugging for guests in order to be able
to start a guest with minimal memory and expand it as needed. This was
the report leading to the patch.
Link: https://lkml.kernel.org/r/20220407120637.9035-1-jgross@suse.com Fixes: 6aa303defb74 ("mm, vmscan: only allocate and reclaim from zones with pages managed by the buddy allocator") Signed-off-by: Juergen Gross <jgross@suse.com> Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by: Wei Yang <richard.weiyang@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The basic reason for this is, when we grow with ftruncate, we call down
into simple_setattr, and then truncate_inode_pages_range, and eventually
we try to zero part of the memory. The normal truncation code does this
via the direct map (i.e., it calls page_address() and hands that to
memset()).
For memfd_secret though, we specifically don't map our pages via the
direct map (i.e. we call set_direct_map_invalid_noflush() on every
fault). So the address returned by page_address() isn't useful, and
when we try to memset() with it we panic.
This patch avoids the panic by implementing a custom setattr for
memfd_secret, which detects resizes specifically (setting the size for
the first time works just fine, since there are no existing pages to try
to zero), and rejects them with EINVAL.
One could argue growing should be supported, but I think that will
require a significantly more lengthy change. So, I propose a minimal
fix for the benefit of stable kernels, and then perhaps to extend
memfd_secret to support growing in a separate patch.
In file included from <command-line>:0:0:
In function ‘ddr_perf_counter_enable’,
inlined from ‘ddr_perf_irq_handler’ at drivers/perf/fsl_imx8_ddr_perf.c:651:2:
././include/linux/compiler_types.h:352:38: error: call to ‘__compiletime_assert_729’ \
declared with attribute error: FIELD_PREP: mask is not constant
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
...
See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.
Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Frank Li <Frank.li@nxp.com> Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: linux-arm-kernel@lists.infradead.org Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20220405151517.29753-10-bp@alien8.de Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Automatically default rsrc tag in io_queue_rsrc_removal(), it's safer
than leaving it there and relying on the rest of the code to behave and
not use it.
When a slip driver is detaching, the slip_close() will act to
cleanup necessary resources and sl->tty is set to NULL in
slip_close(). Meanwhile, the packet we transmit is blocked,
sl_tx_timeout() will be called. Although slip_close() and
sl_tx_timeout() use sl->lock to synchronize, we don`t judge
whether sl->tty equals to NULL in sl_tx_timeout() and the
null pointer dereference bug will happen.
The megaraid_sas driver supports single LUN for RAID devices. That is LUN
0. All other LUNs are unsupported. When a device scan on a logical target
with invalid LUN number is invoked through sysfs, that target ends up
getting removed.
Add LUN ID validation in the slave destroy function to avoid the target
deletion.
Link: https://lore.kernel.org/r/20220324094711.48833-1-chandrakanth.patil@broadcom.com Signed-off-by: Chandrakanth patil <chandrakanth.patil@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The HighPoint RocketRaid 2640 is a low-cost SAS controller based on Marvell
chip. The chip in question was already supported by the kernel, just the
PCI ID of this particular board was missing.
Link: https://lore.kernel.org/r/20220309212535.402987-1-agalakhov@gmail.com Signed-off-by: Alexey Galakhov <agalakhov@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
As part of controller reset operation the driver issues a config request
command. If this command gets times out, then fail the controller reset
operation instead of retrying it.
Link: https://lore.kernel.org/r/20220405120637.20528-1-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
[Why]
On resume we do link detection for all non-MST connectors.
MST is handled separately. However the condition for telling
if connector is on mst branch is not enough for mst hub case.
Link detection for mst branch link leads to mst topology reset.
That causes assert in dc_link_allocate_mst_payload()
[How]
Use link type as indicator for mst link.
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
why and how:
causes failure on install on certain machines
Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
[Why]
In init_hw() we call init_pipes() before enabling power gating.
init_pipes() tries to power gate dsc but it may fail because
required force-ons are not released yet.
As a result with dsc config the following errors observed on resume:
"REG_WAIT timeout 1us * 1000 tries - dcn20_dsc_pg_control"
"REG_WAIT timeout 1us * 1000 tries - dcn20_dpp_pg_control"
"REG_WAIT timeout 1us * 1000 tries - dcn20_hubp_pg_control"
[How]
Move enable_power_gating_plane() before init_pipes() in init_hw()
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
cqspi_set_protocol() only set the data width, but ignored the command
and address width (except for 8-8-8 DTR ops), leading to corruption of
all transfers using 1-X-X or X-X-X ops. Fix by setting the other two
widths as well.
While we're at it, simplify the code a bit by replacing the
CQSPI_INST_TYPE_* constants with ilog2().
Tested on a TI AM64x with a Macronix MX25U51245G QSPI flash with 1-4-4
read and write operations.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Link: https://lore.kernel.org/r/20220331110819.133392-1-matthias.schiffer@ew.tq-group.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
All remaining skbs should be released when myri10ge_xmit fails to
transmit a packet. Fix it within another skb_list_walk_safe.
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
aqc111_rx_fixup() contains several out-of-bounds accesses that can be
triggered by a malicious (or defective) USB device, in particular:
- The metadata array (desc_offset..desc_offset+2*pkt_count) can be out of bounds,
causing OOB reads and (on big-endian systems) OOB endianness flips.
- A packet can overlap the metadata array, causing a later OOB
endianness flip to corrupt data used by a cloned SKB that has already
been handed off into the network stack.
- A packet SKB can be constructed whose tail is far beyond its end,
causing out-of-bounds heap data to be considered part of the SKB's
data.
Found doing variant analysis. Tested it with another driver (ax88179_178a), since
I don't have a aqc111 device to test it, but the code looks very similar.
Signed-off-by: Marcin Kozlowski <marcinguy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Currently there are known potential issues for balloon and hot-add on
ARM64:
* Unballoon requests from Hyper-V should only unballoon ranges
that are guest page size aligned, otherwise guests cannot handle
because it's impossible to partially free a page. This is a
problem when guest page size > 4096 bytes.
* Memory hot-add requests from Hyper-V should provide the NUMA
node id of the added ranges or ARM64 should have a functional
memory_add_physaddr_to_nid(), otherwise the node id is missing
for add_memory().
These issues require discussions on design and implementation. In the
meanwhile, post_status() is working and essential to guest monitoring.
Therefore instead of disabling the entire hv_balloon driver, the
ballooning (when page size > 4096 bytes) and hot-add are disabled
accordingly for now. Once the issues are fixed, they can be re-enable in
these cases.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20220325023212.1570049-3-boqun.feng@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The call to axienet_mdio_setup should not depend on whether "phy-node"
pressents on the DT. Besides, since `lp->phy_node` is used if PHY is in
SGMII or 100Base-X modes, move it into the if statement. And the next patch
will remove `lp->phy_node` from driver's private structure and do an
of_node_put on it right away after use since it is not used elsewhere.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Reviewed-by: Greentime Hu <greentime.hu@sifive.com> Reviewed-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
tlb_remove_huge_tlb_entry only considers PMD_SIZE and PUD_SIZE when
updating the mmu_gather structure.
Unfortunately on arm64 there are two additional huge page sizes that
need to be covered: CONT_PTE_SIZE and CONT_PMD_SIZE. Where an end-user
attempts to employ contiguous huge pages, a VM_BUG_ON can be experienced
due to the fact that the tlb structure hasn't been correctly updated by
the relevant tlb_flush_p.._range() call from tlb_remove_huge_tlb_entry.
This patch adds inequality logic to the generic implementation of
tlb_remove_huge_tlb_entry s.t. CONT_PTE_SIZE and CONT_PMD_SIZE are
effectively covered on arm64. Also, as well as ptes, pmds and puds;
p4ds are now considered too.
Reported-by: David Hildenbrand <david@redhat.com> Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/linux-mm/811c5c8e-b3a2-85d2-049c-717f17c3a03a@redhat.com/ Signed-off-by: Steve Capper <steve.capper@arm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220330112543.863-1-steve.capper@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The alternatives code must be `noinstr` such that it does not patch itself,
as the cache invalidation is only performed after all the alternatives have
been applied.
Mark patch_alternative() as `noinstr`. Mark branch_insn_requires_update()
and get_alt_insn() with `__always_inline` since they are both only called
through patch_alternative().
Booting a kernel in QEMU TCG with KCSAN=y and ARM64_USE_LSE_ATOMICS=y caused
a boot hang:
[ 0.241121] CPU: All CPU(s) started at EL2
The alternatives code was patching the atomics in __tsan_read4() from LL/SC
atomics to LSE atomics.
The following fragment is using LL/SC atomics in the .text section:
| <__tsan_unaligned_read4+304>: ldxr x6, [x2]
| <__tsan_unaligned_read4+308>: add x6, x6, x5
| <__tsan_unaligned_read4+312>: stxr w7, x6, [x2]
| <__tsan_unaligned_read4+316>: cbnz w7, <__tsan_unaligned_read4+304>
This LL/SC atomic sequence was to be replaced with LSE atomics. However since
the alternatives code was instrumentable, __tsan_read4() was being called after
only the first instruction was replaced, which led to the following code in memory:
| <__tsan_unaligned_read4+304>: ldadd x5, x6, [x2]
| <__tsan_unaligned_read4+308>: add x6, x6, x5
| <__tsan_unaligned_read4+312>: stxr w7, x6, [x2]
| <__tsan_unaligned_read4+316>: cbnz w7, <__tsan_unaligned_read4+304>
This caused an infinite loop as the `stxr` instruction never completed successfully,
so `w7` was always 0.
Signed-off-by: Joey Gouly <joey.gouly@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20220405104733.11476-1-joey.gouly@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
As per Table 130 of the wm8994 datasheet at [1], there is an off-on
delay for LDO1 and LDO2. In the wm8958 datasheet [2], I could not
find any reference to it. I could not find a wm1811 datasheet to
double-check there, but as no one has complained presumably it works
without it.
This solves the issue on Samsung Aries boards with a wm8994 where
register writes fail when the device is powered off and back-on
quickly.
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/CY4PR04MB056771CFB80DC447C30D5A31CB1D9@CY4PR04MB0567.namprd04.prod.outlook.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
This commit corrects the printing of the IPU clock error percentage if
it is between -0.1% to -0.9%. For example, if the pixel clock requested
is 27.2 MHz but only 27.0 MHz can be achieved the deviation is -0.8%.
But the fixed point math had a flaw and calculated error of 0.2%.
Before:
Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz
IPU clock can give 27000000 with divider 10, error 0.2%
Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz
After:
Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz
IPU clock can give 27000000 with divider 10, error -0.8%
Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz
Signed-off-by: Leo Ruan <tingquan.ruan@cn.bosch.com> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20220207151411.5009-1-mark.jonas@de.bosch.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Samsung' 840 EVO with the latest firmware (EXT0DB6Q) locks up with
the a message: "READ LOG DMA EXT failed, trying PIO" during boot.
Initially this was discovered because it caused a crash
with the sata_dwc_460ex controller on a WD MyBook Live DUO.
The reporter "Tice Rex" which has the unique opportunity that he
has two Samsung 840 EVO SSD! One with the older firmware "EXT0BB0Q"
which booted fine and didn't expose "READ LOG DMA EXT". But the
newer/latest firmware "EXT0DB6Q" caused the headaches.
BugLink: https://github.com/openwrt/openwrt/issues/9505 Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
KS8851_MLL selects MICREL_PHY, which depends on PTP_1588_CLOCK_OPTIONAL,
so make KS8851_MLL also depend on PTP_1588_CLOCK_OPTIONAL since
'select' does not follow any dependency chains.
Fixes kconfig warning and build errors:
WARNING: unmet direct dependencies detected for MICREL_PHY
Depends on [m]: NETDEVICES [=y] && PHYLIB [=y] && PTP_1588_CLOCK_OPTIONAL [=m]
Selected by [y]:
- KS8851_MLL [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICREL [=y] && HAS_IOMEM [=y]
ld: drivers/net/phy/micrel.o: in function `lan8814_ts_info':
micrel.c:(.text+0xb35): undefined reference to `ptp_clock_index'
ld: drivers/net/phy/micrel.o: in function `lan8814_probe':
micrel.c:(.text+0x2586): undefined reference to `ptp_clock_register'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The adapter request_limit is hardcoded to be INITIAL_SRP_LIMIT which is
currently an arbitrary value of 800. Increase this value to 1024 which
better matches the characteristics of the typical IBMi Initiator that
supports 32 LUNs and a queue depth of 32.
This change also has the secondary benefit of being a power of two as
required by the kfifo API. Since, Commit ab9bb6318b09 ("Partially revert
"kfifo: fix kfifo_alloc() and kfifo_init()"") the size of IU pool for each
target has been rounded down to 512 when attempting to kfifo_init() those
pools with the current request_limit size of 800.
Link: https://lore.kernel.org/r/20220322194443.678433-1-tyreld@linux.ibm.com Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
When recovering from a pci-parity error the driver is failing to re-create
queues, causing recovery to fail. Looking deeper, it was found that the
interrupt vector count allocated on the recovery was fewer than the vectors
originally allocated. This disparity resulted in CPU map entries with stale
information. When the driver tries to re-create the queues, it attempts to
use the stale information which indicates an eq/interrupt vector that was
no longer created.
Fix by clearng the cpup map array before enabling and requesting the IRQs
in the lpfc_sli_reset_slot_s4 routine().
Link: https://lore.kernel.org/r/20220317032737.45308-4-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>