From 0175ce4a58d6e42a707c413f21e1a1f354ea4988 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Fri, 2 Nov 2018 16:29:38 -0500 Subject: [PATCH] dt-bindings: i2c: Convert i2c-gpio binding to json-schema Convert the i2c-gpio binding to DT schema format using json-schema. This serves as an example of how to include other schema (i2c-controller.yaml in this case). Signed-off-by: Rob Herring --- .../devicetree/bindings/i2c/i2c-gpio.txt | 46 ------------ .../devicetree/bindings/i2c/i2c-gpio.yaml | 73 +++++++++++++++++++ 2 files changed, 73 insertions(+), 46 deletions(-) delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-gpio.txt create mode 100644 Documentation/devicetree/bindings/i2c/i2c-gpio.yaml diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-gpio.txt deleted file mode 100644 index 38a05562d1d2..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-gpio.txt +++ /dev/null @@ -1,46 +0,0 @@ -Device-Tree bindings for i2c gpio driver - -Required properties: - - compatible = "i2c-gpio"; - - sda-gpios: gpio used for the sda signal, this should be flagged as - active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) - from since the signal is by definition - open drain. - - scl-gpios: gpio used for the scl signal, this should be flagged as - active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) - from since the signal is by definition - open drain. - -Optional properties: - - i2c-gpio,scl-output-only: scl as output only - - i2c-gpio,delay-us: delay between GPIO operations (may depend on each platform) - - i2c-gpio,timeout-ms: timeout to get data - -Deprecated properties, do not use in new device tree sources: - - gpios: sda and scl gpio, alternative for {sda,scl}-gpios - - i2c-gpio,sda-open-drain: this means that something outside of our - control has put the GPIO line used for SDA into open drain mode, and - that something is not the GPIO chip. It is essentially an - inconsistency flag. - - i2c-gpio,scl-open-drain: this means that something outside of our - control has put the GPIO line used for SCL into open drain mode, and - that something is not the GPIO chip. It is essentially an - inconsistency flag. - -Example nodes: - -#include - -i2c@0 { - compatible = "i2c-gpio"; - sda-gpios = <&pioA 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&pioA 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; /* ~100 kHz */ - #address-cells = <1>; - #size-cells = <0>; - - rv3029c2@56 { - compatible = "rv3029c2"; - reg = <0x56>; - }; -}; diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml new file mode 100644 index 000000000000..da6129090a8e --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bindings for GPIO bitbanged I2C + +maintainers: + - Wolfram Sang + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + items: + - const: i2c-gpio + + sda-gpios: + description: + gpio used for the sda signal, this should be flagged as + active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) + from since the signal is by definition + open drain. + maxItems: 1 + + scl-gpios: + description: + gpio used for the scl signal, this should be flagged as + active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) + from since the signal is by definition + open drain. + maxItems: 1 + + i2c-gpio,scl-output-only: + description: scl as output only + type: boolean + + i2c-gpio,delay-us: + description: delay between GPIO operations (may depend on each platform) + $ref: /schemas/types.yaml#/definitions/uint32 + + i2c-gpio,timeout-ms: + description: timeout to get data + $ref: /schemas/types.yaml#/definitions/uint32 + + # Deprecated properties, do not use in new device tree sources: + gpios: + minItems: 2 + maxItems: 2 + description: sda and scl gpio, alternative for {sda,scl}-gpios + + i2c-gpio,sda-open-drain: + # Generate a warning if present + not: true + description: this means that something outside of our control has put + the GPIO line used for SDA into open drain mode, and that something is + not the GPIO chip. It is essentially an inconsistency flag. + + i2c-gpio,scl-open-drain: + # Generate a warning if present + not: true + description: this means that something outside of our control has put the + GPIO line used for SCL into open drain mode, and that something is not + the GPIO chip. It is essentially an inconsistency flag. + +required: + - compatible + - sda-gpios + - scl-gpios + +... -- 2.39.5