From 05e7ba24b10d30ff40150073f448da4cf26ba189 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Fri, 8 Feb 2019 14:55:28 +0200 Subject: [PATCH] ath10k: implement set_base_macaddr to fix rx-bssid mask in multiple APs conf Many integrated QCA9984 WiFis in various IPQ806x platform routers from various vendors (Netgear R7800, ZyXEL NBG6817, TP-LINK C2600, etc.) have either blank, bogus or non-unique MAC-addresses in their calibration data. As a result, OpenWrt utilizes a discouraged binary calibration data patching method that allows to modify the device's MAC-addresses right at the source. This is because the ath10k' firmware extracts the MAC address from the supplied radio/calibration data and issues a response to the ath10k linux driver. Which was designed to take the main MAC in ath10k_wmi_event_ready(). Part of the "setting an alternate MAC" issue was already tackled by a patch from Brian Norris: commit 9d5804662ce1 ("ath10k: retrieve MAC address from system firmware if provided") by allowing the option to specify an alternate MAC-address with the established device_get_mac_address() function which extracts the right address from DeviceTree/fwnode mac-address or local-mac-address properties and saves it for later. However, Ben Greear noted that the Qualcomm's ath10k firmware is liable to not properly calculate its rx-bssid mask in this case. This can cause issues in the popluar "multiple AP with a single ath10k instance" configurations. To improve MAC address handling, Felix Fietkau suggested to call pdev_set_base_macaddr_cmdid before bringing up the first vif and use the first vif MAC address there. Which is in ath10k_core_start(). This patch implement Felix Fietkau's request to "call pdev_set_base_macaddr_cmdid before bringing up the first vif". The pdev_set_base_macaddr_cmdid is already declared for all devices and version. The driver just needed the support code for this function. Tested on: QCA9880/CUS223, firmwares: 10.2.4.13-2, 10.2.4.70.44, 10.2.4-1.0-00041 QCA9887/MR33 firmware:10.2.4-1.0-00033 QCA4019/RT-AC58U firmware: 10.4-3.4-00104, 10.4-3.5.3-00057 QCA9984/R7800 firmware: Candela Technologies (CT) Firmware BugLink: https://lists.openwrt.org/pipermail/openwrt-devel/2018-November/014595.html Fixes: 9d5804662ce1 ("ath10k: retrieve MAC address from system firmware if provided") Cc: Brian Norris Cc: Ben Greear Cc: Felix Fietkau Cc: Mathias Kresin Signed-off-by: Christian Lamparter Tested-by: Brian Norris Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/core.c | 7 +++++++ drivers/net/wireless/ath/ath10k/wmi-ops.h | 18 ++++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi.c | 21 +++++++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi.h | 4 ++++ 4 files changed, 50 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index c9b75b69de63..1ce4645dac34 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -2659,6 +2659,13 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode, goto err_hif_stop; } + status = ath10k_wmi_pdev_set_base_macaddr(ar, ar->mac_addr); + if (status && status != -EOPNOTSUPP) { + ath10k_err(ar, + "failed to set base mac address: %d\n", status); + goto err_hif_stop; + } + /* Some firmware revisions do not properly set up hardware rx filter * registers. * diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h index e92d00a6a2a1..015084220857 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-ops.h +++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h @@ -69,6 +69,8 @@ struct wmi_ops { struct sk_buff *(*gen_pdev_suspend)(struct ath10k *ar, u32 suspend_opt); struct sk_buff *(*gen_pdev_resume)(struct ath10k *ar); + struct sk_buff *(*gen_pdev_set_base_macaddr)(struct ath10k *ar, + const u8 macaddr[ETH_ALEN]); struct sk_buff *(*gen_pdev_set_rd)(struct ath10k *ar, u16 rd, u16 rd2g, u16 rd5g, u16 ctl2g, u16 ctl5g, enum wmi_dfs_region dfs_reg); @@ -519,6 +521,22 @@ ath10k_wmi_pdev_set_regdomain(struct ath10k *ar, u16 rd, u16 rd2g, u16 rd5g, ar->wmi.cmd->pdev_set_regdomain_cmdid); } +static inline int +ath10k_wmi_pdev_set_base_macaddr(struct ath10k *ar, const u8 macaddr[ETH_ALEN]) +{ + struct sk_buff *skb; + + if (!ar->wmi.ops->gen_pdev_set_base_macaddr) + return -EOPNOTSUPP; + + skb = ar->wmi.ops->gen_pdev_set_base_macaddr(ar, macaddr); + if (IS_ERR(skb)) + return PTR_ERR(skb); + + return ath10k_wmi_cmd_send(ar, skb, + ar->wmi.cmd->pdev_set_base_macaddr_cmdid); +} + static inline int ath10k_wmi_pdev_suspend_target(struct ath10k *ar, u32 suspend_opt) { diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index 903aa8cffc43..cb876c221d8f 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -6286,6 +6286,25 @@ int ath10k_wmi_connect(struct ath10k *ar) return 0; } +static struct sk_buff * +ath10k_wmi_op_gen_pdev_set_base_macaddr(struct ath10k *ar, + const u8 macaddr[ETH_ALEN]) +{ + struct wmi_pdev_set_base_macaddr_cmd *cmd; + struct sk_buff *skb; + + skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd)); + if (!skb) + return ERR_PTR(-ENOMEM); + + cmd = (struct wmi_pdev_set_base_macaddr_cmd *)skb->data; + ether_addr_copy(cmd->mac_addr.addr, macaddr); + + ath10k_dbg(ar, ATH10K_DBG_WMI, + "wmi pdev basemac %pM\n", macaddr); + return skb; +} + static struct sk_buff * ath10k_wmi_op_gen_pdev_set_rd(struct ath10k *ar, u16 rd, u16 rd2g, u16 rd5g, u16 ctl2g, u16 ctl5g, @@ -9095,6 +9114,7 @@ static const struct wmi_ops wmi_10_2_ops = { .gen_peer_create = ath10k_wmi_op_gen_peer_create, .gen_peer_delete = ath10k_wmi_op_gen_peer_delete, .gen_peer_flush = ath10k_wmi_op_gen_peer_flush, + .gen_pdev_set_base_macaddr = ath10k_wmi_op_gen_pdev_set_base_macaddr, .gen_peer_set_param = ath10k_wmi_op_gen_peer_set_param, .gen_set_psmode = ath10k_wmi_op_gen_set_psmode, .gen_set_sta_ps = ath10k_wmi_op_gen_set_sta_ps, @@ -9213,6 +9233,7 @@ static const struct wmi_ops wmi_10_4_ops = { .gen_pdev_suspend = ath10k_wmi_op_gen_pdev_suspend, .gen_pdev_resume = ath10k_wmi_op_gen_pdev_resume, + .gen_pdev_set_base_macaddr = ath10k_wmi_op_gen_pdev_set_base_macaddr, .gen_pdev_set_rd = ath10k_wmi_10x_op_gen_pdev_set_rd, .gen_pdev_set_param = ath10k_wmi_op_gen_pdev_set_param, .gen_init = ath10k_wmi_10_4_op_gen_init, diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index f849481ed65e..86f128b9a34a 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -4085,6 +4085,10 @@ struct wmi_pdev_set_param_cmd { __le32 param_value; } __packed; +struct wmi_pdev_set_base_macaddr_cmd { + struct wmi_mac_addr mac_addr; +} __packed; + /* valid period is 1 ~ 60000ms, unit in millisecond */ #define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000 -- 2.39.5