From 262e1ff91c3bc9d6b082c123fc7035c1e6347469 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Thu, 20 Dec 2018 19:42:27 +0000 Subject: [PATCH] mlxsw: spectrum: Set PVID during port initialization Currently, the driver does not set the port's PVID when initializing a new port. This is because the driver is using VID 1 as PVID which is the firmware default. Subsequent patches are going to change the PVID the driver is setting when initializing a new port. Prepare for that by explicitly setting the port's PVID. Signed-off-by: Ido Schimmel Reviewed-by: Petr Machata Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index 764d849a9c90..80028cde00a7 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -3181,6 +3181,13 @@ static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port, goto err_port_nve_init; } + err = mlxsw_sp_port_pvid_set(mlxsw_sp_port, MLXSW_SP_DEFAULT_VID); + if (err) { + dev_err(mlxsw_sp->bus_info->dev, "Port %d: Failed to set PVID\n", + mlxsw_sp_port->local_port); + goto err_port_pvid_set; + } + mlxsw_sp_port_vlan = mlxsw_sp_port_vlan_create(mlxsw_sp_port, MLXSW_SP_DEFAULT_VID); if (IS_ERR(mlxsw_sp_port_vlan)) { @@ -3210,6 +3217,7 @@ err_register_netdev: mlxsw_sp_port_switchdev_fini(mlxsw_sp_port); mlxsw_sp_port_vlan_destroy(mlxsw_sp_port_vlan); err_port_vlan_create: +err_port_pvid_set: mlxsw_sp_port_nve_fini(mlxsw_sp_port); err_port_nve_init: mlxsw_sp_tc_qdisc_fini(mlxsw_sp_port); -- 2.39.5