From 2a3cdead8b408351fa1e3079b220fa331480ffbc Mon Sep 17 00:00:00 2001 From: Aaron Sierra Date: Tue, 3 Nov 2015 12:37:09 -0600 Subject: [PATCH] igb: Remove GS40G specific defines/functions The I210 internal PHY can be accessed just as well with the access functions shared by 82580, I350, and I354 devices. A side effect of relying on the common functions, is that I210 cable length support is folded back into the common case which effectively reverts the following commit: commit 59f301046b276f87483b3afa3201a4273def06a9 Author: Carolyn Wyborny Date: Wed Oct 10 04:42:59 2012 +0000 igb: Update get cable length function for i210/i211 Cc: Carolyn Wyborny Signed-off-by: Aaron Sierra Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/e1000_82575.c | 13 +--- drivers/net/ethernet/intel/igb/e1000_i210.c | 5 +- drivers/net/ethernet/intel/igb/e1000_i210.h | 2 +- drivers/net/ethernet/intel/igb/e1000_phy.c | 82 +------------------- drivers/net/ethernet/intel/igb/e1000_phy.h | 15 +--- 5 files changed, 11 insertions(+), 106 deletions(-) diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index 362911d024b5..adb33e2a0137 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -45,8 +45,6 @@ static s32 igb_get_cfg_done_82575(struct e1000_hw *); static s32 igb_init_hw_82575(struct e1000_hw *); static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *); static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16 *); -static s32 igb_read_phy_reg_82580(struct e1000_hw *, u32, u16 *); -static s32 igb_write_phy_reg_82580(struct e1000_hw *, u32, u16); static s32 igb_reset_hw_82575(struct e1000_hw *); static s32 igb_reset_hw_82580(struct e1000_hw *); static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *, bool); @@ -205,13 +203,10 @@ static s32 igb_init_phy_params_82575(struct e1000_hw *hw) case e1000_82580: case e1000_i350: case e1000_i354: - phy->ops.read_reg = igb_read_phy_reg_82580; - phy->ops.write_reg = igb_write_phy_reg_82580; - break; case e1000_i210: case e1000_i211: - phy->ops.read_reg = igb_read_phy_reg_gs40g; - phy->ops.write_reg = igb_write_phy_reg_gs40g; + phy->ops.read_reg = igb_read_phy_reg_82580; + phy->ops.write_reg = igb_write_phy_reg_82580; break; default: phy->ops.read_reg = igb_read_phy_reg_igp; @@ -2153,7 +2148,7 @@ void igb_vmdq_set_replication_pf(struct e1000_hw *hw, bool enable) * Reads the MDI control register in the PHY at offset and stores the * information read to data. **/ -static s32 igb_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data) +s32 igb_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data) { s32 ret_val; @@ -2177,7 +2172,7 @@ out: * * Writes data to MDI control register in the PHY at offset. **/ -static s32 igb_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data) +s32 igb_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data) { s32 ret_val; diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.c b/drivers/net/ethernet/intel/igb/e1000_i210.c index 29f59c76878a..8aa798737d4d 100644 --- a/drivers/net/ethernet/intel/igb/e1000_i210.c +++ b/drivers/net/ethernet/intel/igb/e1000_i210.c @@ -861,10 +861,10 @@ s32 igb_pll_workaround_i210(struct e1000_hw *hw) if (ret_val) nvm_word = E1000_INVM_DEFAULT_AL; tmp_nvm = nvm_word | E1000_INVM_PLL_WO_VAL; + igb_write_phy_reg_82580(hw, I347AT4_PAGE_SELECT, E1000_PHY_PLL_FREQ_PAGE); for (i = 0; i < E1000_MAX_PLL_TRIES; i++) { /* check current state directly from internal PHY */ - igb_read_phy_reg_gs40g(hw, (E1000_PHY_PLL_FREQ_PAGE | - E1000_PHY_PLL_FREQ_REG), &phy_word); + igb_read_phy_reg_82580(hw, E1000_PHY_PLL_FREQ_REG, &phy_word); if ((phy_word & E1000_PHY_PLL_UNCONF) != E1000_PHY_PLL_UNCONF) { ret_val = 0; @@ -896,6 +896,7 @@ s32 igb_pll_workaround_i210(struct e1000_hw *hw) /* restore WUC register */ wr32(E1000_WUC, wuc); } + igb_write_phy_reg_82580(hw, I347AT4_PAGE_SELECT, 0); /* restore MDICNFG setting */ wr32(E1000_MDICNFG, mdicnfg); return ret_val; diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.h b/drivers/net/ethernet/intel/igb/e1000_i210.h index eaa68a50cb3b..b2964a2a60b1 100644 --- a/drivers/net/ethernet/intel/igb/e1000_i210.h +++ b/drivers/net/ethernet/intel/igb/e1000_i210.h @@ -85,7 +85,7 @@ enum E1000_INVM_STRUCTURE_TYPE { #define E1000_PCI_PMCSR_D3 0x03 #define E1000_MAX_PLL_TRIES 5 #define E1000_PHY_PLL_UNCONF 0xFF -#define E1000_PHY_PLL_FREQ_PAGE 0xFC0000 +#define E1000_PHY_PLL_FREQ_PAGE 0xFC #define E1000_PHY_PLL_FREQ_REG 0x000E #define E1000_INVM_DEFAULT_AL 0x202F #define E1000_INVM_AUTOLOAD 0x0A diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c index c0df40f2b295..c906826b6c02 100644 --- a/drivers/net/ethernet/intel/igb/e1000_phy.c +++ b/drivers/net/ethernet/intel/igb/e1000_phy.c @@ -1719,30 +1719,10 @@ s32 igb_get_cable_length_m88_gen2(struct e1000_hw *hw) u16 phy_data, phy_data2, index, default_page, is_cm; switch (hw->phy.id) { - case I210_I_PHY_ID: - /* Get cable length from PHY Cable Diagnostics Control Reg */ - ret_val = phy->ops.read_reg(hw, (0x7 << GS40G_PAGE_SHIFT) + - (I347AT4_PCDL + phy->addr), - &phy_data); - if (ret_val) - return ret_val; - - /* Check if the unit of cable length is meters or cm */ - ret_val = phy->ops.read_reg(hw, (0x7 << GS40G_PAGE_SHIFT) + - I347AT4_PCDC, &phy_data2); - if (ret_val) - return ret_val; - - is_cm = !(phy_data2 & I347AT4_PCDC_CABLE_LENGTH_UNIT); - - /* Populate the phy structure with cable length in meters */ - phy->min_cable_length = phy_data / (is_cm ? 100 : 1); - phy->max_cable_length = phy_data / (is_cm ? 100 : 1); - phy->cable_length = phy_data / (is_cm ? 100 : 1); - break; case M88E1543_E_PHY_ID: case M88E1512_E_PHY_ID: case I347AT4_E_PHY_ID: + case I210_I_PHY_ID: /* Remember the original page select and set it to 7 */ ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT, &default_page); @@ -2587,66 +2567,6 @@ out: return ret_val; } -/** - * igb_write_phy_reg_gs40g - Write GS40G PHY register - * @hw: pointer to the HW structure - * @offset: lower half is register offset to write to - * upper half is page to use. - * @data: data to write at register offset - * - * Acquires semaphore, if necessary, then writes the data to PHY register - * at the offset. Release any acquired semaphores before exiting. - **/ -s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data) -{ - s32 ret_val; - u16 page = offset >> GS40G_PAGE_SHIFT; - - offset = offset & GS40G_OFFSET_MASK; - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - return ret_val; - - ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page); - if (ret_val) - goto release; - ret_val = igb_write_phy_reg_mdic(hw, offset, data); - -release: - hw->phy.ops.release(hw); - return ret_val; -} - -/** - * igb_read_phy_reg_gs40g - Read GS40G PHY register - * @hw: pointer to the HW structure - * @offset: lower half is register offset to read to - * upper half is page to use. - * @data: data to read at register offset - * - * Acquires semaphore, if necessary, then reads the data in the PHY register - * at the offset. Release any acquired semaphores before exiting. - **/ -s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data) -{ - s32 ret_val; - u16 page = offset >> GS40G_PAGE_SHIFT; - - offset = offset & GS40G_OFFSET_MASK; - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - return ret_val; - - ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page); - if (ret_val) - goto release; - ret_val = igb_read_phy_reg_mdic(hw, offset, data); - -release: - hw->phy.ops.release(hw); - return ret_val; -} - /** * igb_set_master_slave_mode - Setup PHY for Master/slave mode * @hw: pointer to the HW structure diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.h b/drivers/net/ethernet/intel/igb/e1000_phy.h index aa1ae61a61d8..969a6ddafa3b 100644 --- a/drivers/net/ethernet/intel/igb/e1000_phy.h +++ b/drivers/net/ethernet/intel/igb/e1000_phy.h @@ -72,8 +72,8 @@ s32 igb_copper_link_setup_82580(struct e1000_hw *hw); s32 igb_get_phy_info_82580(struct e1000_hw *hw); s32 igb_phy_force_speed_duplex_82580(struct e1000_hw *hw); s32 igb_get_cable_length_82580(struct e1000_hw *hw); -s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data); -s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data); +s32 igb_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data); +s32 igb_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data); s32 igb_check_polarity_m88(struct e1000_hw *hw); /* IGP01E1000 Specific Registers */ @@ -144,17 +144,6 @@ s32 igb_check_polarity_m88(struct e1000_hw *hw); #define E1000_CABLE_LENGTH_UNDEFINED 0xFF -/* GS40G - I210 PHY defines */ -#define GS40G_PAGE_SELECT 0x16 -#define GS40G_PAGE_SHIFT 16 -#define GS40G_OFFSET_MASK 0xFFFF -#define GS40G_PAGE_2 0x20000 -#define GS40G_MAC_REG2 0x15 -#define GS40G_MAC_LB 0x4140 -#define GS40G_MAC_SPEED_1G 0X0006 -#define GS40G_COPPER_SPEC 0x0010 -#define GS40G_LINE_LB 0x4000 - /* SFP modules ID memory locations */ #define E1000_SFF_IDENTIFIER_OFFSET 0x00 #define E1000_SFF_IDENTIFIER_SFF 0x02 -- 2.39.5